CONSTRUCITON OF 11 KV LT LINE AT SECTION NACHNI FOR PEYJAL PUMP UNDER JJM SCHEME UNDER EDD DHARCHULA

Amount

SUPPLY OF CENTRALISED MATERIAL

Steel pole 8.5 mtr. SP-23 BPHD

Steel pole 8.5 mtr. SP-21 BPHD

TF 1/0.4 KV 100 KVA

LT XLPE Cable 1x95 sq mm

ACSR Rabbit conductor

ACSR weasel conductor for 11 KV earth

M.S. channel 100×50 mm

M.S. angle 75x75x6 mm. for gaurding &river crossing

M.S. angle 50x50x6 mm.

11 KV Polyemer Disc insulator

11kv Disc fitting 45 KN

11 KV polymer pin insulator with pin

Earthing rod 20 × 2500 mm.

gi wire 5mm/6swg for 11 kv line gurading or pole earthing

Stay Set 16X1800 mm.

LT XLPE AB Cable3x95+1x70 sq mm

Stay wire 7/10 SWG

LIGHTINING ARRESTER 9kv 10 ka

g s strip 35x6 mm

11 kv go switch

SUPPLY OF NON CENTRALISED MATERIAL

Top channel clamp for SP-23 with nut & bolt

holding clamp for tpmo and fuse set tf base

top channel clamp for guarding 11 kv line

Top bracing set clamp for SP-23 with N&B

Bottom bracing set clamp for SP-23 with N&B

Earth wire clamp for SP-23 with N&B

Stay clamp with N&B for SP-23 double ended

Stay clamp with N&B for SP-23 single ended

LT J Hook clamp with nut &bolt

LT Dead end clamp with n&b

LT suspension clamp

Stay clamp with N&B for SP-21 single ended

11 KV Fuse Set

LABOUR CHARGE

Cartage of Steel poles from concer firm to construction site with loading & unloading at both points approx distance 600 Km

Steel pole 8.5 mtr. SP-23 (BPHD)

Steel pole 8.5 mtr. SP-21 (BPHD)

Other material(Centralised Items)

T/F 11/0.4 100 KVA

Head load cartage of following material from road to site approx distance 10 Km

Steel pole 8.5 mtr. SP-23 (BPHD)

Steel pole 8.5 mtr. SP-21 (BPHD)

Other material(Centralised Items+De-Centralised Items)

T/F 11/0.4 100 KVA

Exavation of earth for pole pit of size 0.9x0.9x1/6 of full lenth of polestay pit size 0.6x0.6x1.2 mtrin all types of soil including proper dressing of including proper dressing of sides and ramming of bottom including getting out the excavted soil and disposelof surplus and disposel of surplus excaveted soll as directed complete work.

Steel pole 8.5 mtr. SP-23(0.765X121)

Steel pole 8.5 mtr. SP-21(0.765X2)

erection of pole support as per RESSPO specification of the following types of poles in boulder mixed soil, grouting of support in CC 1:4:8 block incuding cost of ballast,cement and sand, back filling of soil and boulders in pit and ramming filling of accessories of the pole, leveling and erection of pole

SP-23 (with CC) Double Pole

SP-21 (with CC) Single Pole

Grouting of pole in size 0.45x0.45x1/9 of the supprt in cc ratio 1:4:8 block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper allignment leveling as per resspo construction manual

Steel pole 8.5 mtr. SP-23(0.2565X20)

Steel pole 8.5 mtr. SP-21(0.2653X03)

Muffing of poles with CC1;3;6 block and 45 Cm hight from ground level including cost of ballast, cement & sand. SP-23

Fabriction of MS Channel, angle iron after cutting in requeired sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc as per RESSPO

Exavation of earth for stay pit size 0.6x0.6x1.2 mtrin all types of soil including proper dressing of sides and ramming of bottom including getting out the excavted soil and disposelof surplus and disposel of surplus excaveted soll as directed complete work.(0.432X51)

Fixing, tightening and nozzling of stay with pole and stay rod for 11 KV

Grouting of stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling.(51x0.108)

Erection & earthing of support with MS Earth rod of 2.5 Mtr long incuding exavation of pit and digging of MS rod proper depth and connecting the earth electrode with the GI wire as per instruction manual

Laying, spreading, stringing and sagging of 11 KV line in 3 P 4 W of the Rabbit conductor with GI earth wire complete including fixing of all accessories in 3 Nos conductor in parallel with binding and jupering as per profile and sagging chart

Laying, spreading, stringing and sagging of LT line with ACSR Weasel conductor 3 P 4W

Route clearance by cutting of tree branches/ proning, loping and chopping of trees for 11 KV line

Earthing of distribution T/F incuding digging of pit of size 2.5 mtr depth and make hole of size 150mm. Placing of earthing electrode(to be supplied by contractor as per drawing No A) as drawing B, connecting the same with GI strip(to be supplied by contractor) of size 35x6 mm as per drawing C for a minimum length 6 mm, treatment of soil with highly conductive subustance as per IS 30343 complete in all respect, result of earthing resistance to be recorded in MB before and after instalation of earthing. the earth resistance after earthing should be less then 1 Ohm.

Mounting/fixing of TPMO on doble pole structure including making of connection complete work.

Mounting/fixing of fuse set on doble pole structure including making of connection complete work.

Mounting & fixing of LA set(3 No) on double pole structure including making all connection vy GI strip size 35x6 mm to earth point(incuding cost of GI strip)

Installation/Mounting following 100 KVAT/F on Plinth and fixing of channel and making all connections of HT and LT and its complete commissioning.

Construction of transformer plinth work with size 2x2x1.1 Mtr above ground level and 0.6 mtr below ground level includung cost of cement ,brick ,ballast and sand

Excavation of earth 2.1x2.1x0.6 mtr

Cement concreating work in ratio 1:4:8 cc(2.1X2.1X0.15)

Brick work in 1:4(2X2X1.4)

RCC work 1:2:4 CC 15 Cm thick(2X2X0.15)

Cement plaster on side wall in 1:4(4x1.1X2)

Erection, providing and fixing of wire Mesh fencing around Plinth as per RESSPO

Erection providing and fixing of 50X35 mm wire mesh of size 2(2+4) meter around plinth and toe wall duly welded with frame of M.S. angle iron 35X35X6 mm and strip of size 35X6mm in mid of each side along with wire mesh(width of wire mesh 1.5 meter) with the height of 1.5 meter above the plinth and 2 meter above the toe wall with 01 no legs in the ration in block of size 0.25X0.25X0.45 meter including gravelling of shingle of size 20 to 40 mm and complete painting of wire mesh with aluminum paint with two coat(including the cost of cement and all material)

Construction of 01(DP-1) protection wall for 11 KV Structure

Excavation in all type of soil including ramming and dressing of surface DP(1x5.94)

Base concreting in 1:6:12 cc DP(1x1.98)

R&R Stone Massonary in 1:6 course fine sand & cement DP(1x25.19)

Top concreting in 1:2:4 cc DP(1x0.45)

HP Stone Filling DP(1x19.49)

Saun Engineering and Construction Co P Ltd

vijay electricals