Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC 00 BEHIND COURT PHALODI NAI SARAK PHALODI JODHPUR RAJASTHAN 342301 UDYAM RJ 22 0048153 | JODHPUR | RAJASTHAN | 342301 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹41.6 L+₹2.1 L (5.32%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹43.1 L+₹3.6 L (9.16%)Rejected-Finance | L3 | Rejected-Finance Being not lowest |
Tender Value
₹43.5 L
EMD Value
₹87,100
Closing Date
28 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR 342011 Rajasthan
PROVN OF ACCESS ROAD AROUND SWT NEAR 105 HU AND STRAIGHT ROAD CONNECTING NORTH DISPERSAL WITH DSS OF NORTH DISPERSAL AT AFS PHLAODI
2023_MES_625685_1
86050/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
GE AF PHALODI
As per NIT
8 documents required · 8 mandatory
₹500
GE AF PHALODI
₹87,100
Yes
17 Jan 2024
30 Oct 2023
6 Dec 2023
30 Oct 2023
28 Nov 2023
14 Nov 2023
Amount
Surface dressing n.exc (not exceeding) 15 cm deep and getting out hard/dense soil complete all as specified and directed
Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5m width as well as 10 Sqm on plan) including getting out all kind of soil and lift upto 1.50 m as directed by Engr In Charge complete all as specified and directed
Removing excavated material soil exc. 500m but upto total distnce of 1.50 km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed
Rolling consolidating for formation surface in cutting with power roller exceeding 8 tonne and not exceeding 12 ton to achive 98% density if OMC modified proctor density complete all as specified and directed
M & L granular Sub Base of spread thickness 200 mm laid in two layers using kankar or laterite spread rolled and consolidated to required gradient and camber complete all as specified and directed
M&L for 150mm thick (compacted thickness) Wet Mix Macadam (WMM) laid in two layers of 75 mm each with coarse aggregate of specification grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, materialcomprising of clean, crushd, graded aggregate and granular material premixed with water to s dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerance to be as per table 900-1 of MoRTH specifications for Road and Bridge works 2013.
M&L for prepration surfaces of unsurface WMM by brushing with wire brushes for removing caked mud etc , sweeping with brooms and finally fanning the cleaned surface with mechanical compressor to remove all loose dirt etc and applying evenly a tack coat/priming coat with bituminous primer Vg 10 @ 10 kg per 10 sqm, over WMM surfaces complete all as specified and directed
M&L Semi dense Bituminous premix asphaltic concrete, consolidated thickness of 40mm rolled and compacted to required camber and gradient all as specified, using minimum 6% of binder content by weight of total mix using paving bitumen complete all as specified and directed .
M & L for stone karb of roughly squared sand stones Jodhpur types of size 10 cm x 30cm minimum 45cm length, all surfaces hammer dressed so that the maxium depression from a straight edge held against the dressed surface shall not exceed 20mm and jointed in CM 1:6 and struck flush etc complete all as specified and directed.
M&L for 100 mm thick Moorum berms laid in layers spread levelled rolled (8-10 Ton road roller) ,watered and consolidated to gradient and camber required as in shoulders etc. complete all as specified and directed
Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line etc. not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft / loose soil complete all as specified.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified.
Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.
Taking out from trench existing old rusted / corroded CI/DI pipe of size 150 mm bore spigot and socketed ends ( including all fittings) and lead joints incuding burning out joints and recovering lead including bailing out dirty / muddy water if necessary complete all as directed by Engineer-in-charge.
Supplying, laying, jointing, commissioning & testing DI pipes with rubber gasket Tyton push on Joints of spigot and socket ends centrifugally cast(spun) class " K-7" conforming to IS-8329 -2000 in any length of size 150mm bore laid in trenches complete all as specified.
Supply and fixing CI / DI fittings and specials up to 150 mm dia (any type, radius and angle) like collar, bends, tee, tail piece caps and pugs, single branch ‘Y’ junction, double branch, cross, spigot & socket or taper and flanged, straight bend, increasing decreasing or double socket, reducer complete all as specified and as directed.
Taking out from trenchs / from under roads existing old unservicable rusted / corroded GI pipe 80 mm bore and connections including all fittings complete all as specified and as directed.
Supplying, Laying, jointing and testing of GI steel water tubing 80 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road complete all as specified and directed.
M&L GI pipe 80 mm dia light grade with all fittings, MS clamps fixed on wall or laid in floors for protection of cable all as directed.
Supply and fixing sluice valve class PN1.6 , size 150 mm Dia .
Jeet Construction
M/s Ramniwas Bishnoi
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .