Renovation of C type quarter (Existing Division and sub division Office) at Karjan Colony Ankleshvar, Dist: Bharuch

BILL OF QUANTITIES

Renovation of C type quarter (Existing Division and sub division Office) at Karjan Colony,

Ankleshwar Dist-Bharuch

Item Item of work Quantites Unit Rates in Amount

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment etc.

1 complete and stacking them within all lead and 42.00 Each 182.94

lift.(i) Not exceeding 3 Sq.M. in area.

Dismantling santtary fittings like wash basin,

W.C. pan Indian and European type, flushing

2 tank etc. including stacking the materials with 6.00 Each 394.51

all lead and lift.

Providing and fixing black marble frame with all

open edges machine cut & machine polished,

fixed by zinc coated hinges with Single shutter

of factory made & stamped I.S. 12823 grade one,

type one 35 mm th solid core, melamine faced,

three layered resin, flushed door, having

decorative lamination on both sides & 'u' type

3 2mm. th. 35mm. x 35mm. specially shaped 28.00 Sqm 5925.67

molded colored anodized aluminum beading

fixed around the door, from "novapan" or

equivalent company holding licence for

minimum 5 years including all accessories like

hindges, handle (60 cm) etc complete

Providing and fixing window having extruded

aluminum Colour Powder Coated section frame

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094 Kg / Rmt, horizontal two track member

size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

0.695 Kg/mt, vertical member of size 61.85 mm

with sliding shutters of horizontal member size

vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to

frame as per details etc complete for window

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/mt with colour

anodized alluminium frame for ventilation with

5 mm thick frosted glass as details etc complete

for Ventilation

Providing and fixing FRP of 28mm thick Fibre

Glass shutter with 1.5 to 2.0 mm thick fire

retardent grade FRP skin in depressed panel

design having extra reinforcement on sides &

edges & in Gel coat finish. The core of the

shutter is to be filled up with injected retardent

grade polyurethane foam done in situ alongwith

embedded wooden pieces for stiffening & also

6 taking hinges & fintures. The whole FRP frame 5.00 Sqm 1560.33

& shutter is to be water proof ,weather proof,

termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium S.S fixtures &

fastenings & fastener sleeve.

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor two

level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

Providing 10mm thick cement plaster in single

coat on brick/concrete walls for interior

plastering upto floor two level and finished even

and smooth in (i)Cement mortar 1:3 (1-

8 cement:3-sand) + Extra over items 58 to 71 for 139.00 Sqm 164.97

plastering on ceilings and sofits of stairs upto

floor two level instead of plastering on walls.

Removing and scraping of old deteriorated

plaster of any thickness from wall / R.C.C

9 member including stacking of serviceable 553.00 Sqm 18.94

material and disposal of unserviceable from site

of work with all lead and lift

Removing dry or oil bound distemper by a

washing and scraping and sand papering the

wall surface smooth including necessary repairs

to scratches complete.

Applying two coats of putty & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

11 including thoroughly brushing the surface free 692.00 Sqm 40.59

from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth.

Extra over item 12 for painting with plastic

13 emulsion paint of approved brand on ceilings 139.00 Sqm 84.16

and sloping roofs.

20mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M.

1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc.

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

15 thoroughly brushing the surface to remove all 819.00 Sqm 114.53

dirt, and remains of loose powdered

materials.etc complete

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

16 disposal of unserviceable materials with all lead 2.00 Cum 536.09

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

17 disposal of unserviceable materials with all lead 157.00 Sqm 46.77

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive

18 material including dismentaling of existing 147.00 Sqm 1415.77

flooring and jointed with color cement slurry

including finised with flush pointing & cleaning

the surface etc. complete for light shade

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in skrting risers of steps and

19 dedo on 10mm thick cement plaster 1:3 (1- 30.00 Sqm 1141.45

cement : 3-coarse sand) and jointed with white

Providing and laying Ceramic tiles 6mm thick in

flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-

20 cement : 3-coarse sand ) finishing with flush 11.00 Sqm 957.63

pointing in white cement.

Providing and laying coloured glazed tiles of the

size 300 mm x 200 mm x 8 mm / 300 mm x

mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement :

3 coarse sand) & jointed with white cement

Providing and fixing wash down water closet

(European type, W.C. Pan) with integral P or S

trap including jointing the trap with soil pipe in

22 Cement Mortar 1:1 (1-Cement : 1-fine sand) 3.00 Each 1303.71

(Seal and cover to be measured and paid for

separately) (A) vitreous China Pattern :(i) in

Providing and fixing plastic seat and cover for

wash down water closer with C.P. brass hinges

23 and rubber buffers. (B) Black plastic seal and 3.00 Each 291.33

Health Fauset Heavy duty with hook with fitting

Providing and fixing washbasin with single hole

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good

the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for

washbasin or sink. (B) 40mm dia.

Providing, laying and jointing in true line and

level 110 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall

be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of

27 PVC clamp of the size 110 mm diametre x 149 50.00 Rmt 835.15

mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

28 seal for potable water of following dia. nominal 20.00 Rmt 166.86

bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.[A]

Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

29 seal for potable water of following dia. nominal 20.00 Rmt 249.72

bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [C]

Providing and fixing screw down bib taps of

30 following size.(A) Brass screw down bib tap 10.00 Each 186.83

polished bright. (i) 15mm dia.

Providing and fixing pillar tap, capstan head,

31 screw down high pressure with screws, shanks 3.00 Each 308.73

and back nuts. (i) 15mm dia.

Providing and fixing cast iron (Spun) Nahni trap

of the following nominal diameter of self

cleaning design with C.I. screaed down or

32 higned grating including cost of cutting and 3.00 Each 615.63

making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia.

Providing erecting and fixing double coated

Syntex PVC. ISI water tank of required capacity

33 each with all necessary fittings and connection 4000.00 litre 3.95

etc. complete on terrace

Providing and fixing 600mm x 450mm bevelled

edge mirrror of superior glass mounted on 6mm

34 thick A.C. sheet or plywood sheet and fixing to 6.00 Each 833.73

wooden pluge with C.P. brass screws and

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

35 (inside) with standard weight.(i) Square mouth 3.00 Each 1292.19

traps. (A) 100mm x 100mm size P type.

Providing and fixing 25 mm thick shutters for

cupboards etc. including anodised alluminium

36 butt hinges with necessary screws. (A) Indian 35.00 3064.44

teak wood. (i) Fully Panelled.

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray

37 cement slury mixed with pigment to match the 35.00 1121.48

shade of slab including rubbing and polishing

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe,

38 tap etc. complete. (A) White earthenware flat 3.00 Each 1036.27

back or corner type size 430mm x 260mm x

Providing and fixing pre-cast Rubber Dye / steel

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018 etc.

Providing and laying cement concrete 1:2:4 (1-

Cement : 2 Coarse sand : 4- graded stone

40 aggregates 20 mm nominal size) and curing 57.00 Cum 3481.28

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x

41 mm with 38mm dia, steel pulleys complete with 8.00 q 5787.15

bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of red

Excavation for foundation in all sorts of soil

including yellow, sandy, gravelly soil, soft &

hard murrum, etc. dry condition including

42 depositing the excavated stuff in uniform layers 45.00 Cum 81.50

in banks or as directed etc. complete for lead up

to 1.0 Km and all lifts. (By machinery) (a) Above

Providing and fixing in position (different

diameter) I.S NP3 class reinforced pipe with

caulking the joints with cement mortar 1:1

proportion using jute string soaked in cement

slurry, finishing joints, and laying pipes to the

designed grade and levels, curing etc. complete

for all lead and lifts. (e) NP3 class 900mm dia

Back fiing the foundation trenches around the

structures etc. with selected excavated stuff

including watering, ramming, compacting etc.

complete.(By machinary)

I/We am/are willing to carry out the work at………………………………….% above/below percent (should be written in

figures and words ) of the estimated rates mentioned above. Amount of my/our tcnder works out as under.

Estimated amount Put to tender Estimated amount Put to tender

Deduct…………..% below Add……….…% Above

In words In words

1 The Contractor shall exhibit a board with brief details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R. NO.:

MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R. therefore in R.C.C. items where there is a change

as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

Sign Of Contractor Executive Engineer

Medium irrigation Project Division