Restoration of Rain damages on Dharamshala Yol Dadh Holta Chadiyar Sandhole road Km 33/00 to 40/500, Patti Bodhal Pahra road Km 0/00 to 5/00

Providing, laying, spreading and compacting stone aggregates of size 53mm to 22.4mm (Fifty three milimetre to Twenty two point four milimetre) Grading -III, 75mm ( Seventy five milimetre consolidated thick) to water bound macadam specification including spreading in uniform thickness, using template hand packing, rolling with Three wheel 80-100 KN static roller to stages to proper grade and camber, applying and brooming, stone screening Type B of size 11.2mm ( Eleven point two milimetre) nominal size at the rate of 0.18 Cum. (Zero point one Eight Cubicmetre) per ten square metre and to fill up the interstices of coarse aggregate watering and compacting to the required density as per technical Specification Clause 405 as per entire satisfaction and direction of the Engineer -in-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.

Providing and applying tack coat with Bitumen Emulsion (RS-1) using emulsion pressure distributor at the rate of 0.225 Kg. ( Zero decimal two two five kilogram) per ten Square metres on the prepared bituminous surface treated with primer and cleaned with Hydraulic broom as per technical specification clause 503, as per directions of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.

Providing and laying 50mm (fifty millimetre) thick Bituminous Macadam with 40-60 (Forty to Sixty) TPH batch type HMP producing an average output of 40 (Forty) tones per hour using crushed aggregates of specified grading, premixed with bitumen VG-10 (Viscosity grade- ten) @ minimum 3.30 (Three decimal three zero) per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORD specification complete in all respects including profile correction layer and patching of pot holes, within all leads and lifts including carriage of materials, plants and equipments by mechanical transport, as per the direction of Engineer-in-Charge. Nothing extra will be paid for higher bituminous contents required as per job mix formula. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.

Providing and laying 30mm (Thirty millimetre) compacted thick Bituminous Concrete with crushed stone aggregate of grading -II (Two), 13.2 (Thirteen point two) millimetre nominal size, using bitumen VG-10 (VG-Ten) minimum 5.5% (Five point five percent) of weight of mix and filler on thoroughly cleaned surface by mechanical broom and dust removed by compressed air, mixed in computerised batch mix/HMP of 80-100 (Eighty to hundred) TPH capacity calibrated from time to time, mixing the bituminous concrete, transporting the mix material in clean insulated vehicles covered while in transit or awaiting, tipping and laying with hydrostatic paver finisher with sensor control to the required level alignment and grade, rolling with smooth wheeled, vibratory and tandem power road roller to achieve the desired compaction as per MORT&H specification clause 507( 5th revision) complete , within all leads and lifts including carriage of materials, plants and equipments by mechanical transport, as per the direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.