SPECIAL REPAIRS TO RA-13/2 (OFFRS MD ACCN) AND RA-13H (HALF PORTION GARAGE AND SERVANT QTR) AT RA LINE OF DSC CENTRE UNDER AGE (I) CANNANORE

Amount

Taking down cement plaster on brick/stone walls or ceiling etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L Rendering 5 mm thick in CM 1:3 on ceiling surfaces and finishing the surface even and smooth (wthout using extra cement) complete all as specified and directed.

M&L for rendering 15mm thick in two layers, first layer (rendering coat) of 10mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces and second coat (finishing coat) of 5mm thick in cement mortar 1 : 4 including mixed with water proofing compound @ 3 % and finished even and fair without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1 :6 on stone masonry surfaces/ Internal wall Surface to be finished even and smooth (without using extra cement) complete all as specified and directed.

Dismanlting floor, hearth and wall tiling incl cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards, slabs, blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L GI 600 x600 mm snap grid frame, powder coated sections comprising of undermentioned sections etc for grid frame including 4mm thick designer ceiling board of any texture such as lake/hill/oceanic/cascade/electra of M/s Everest ceiling ceiling grid system as per regular T-2430 or equivalent in Ramco/Charminar/Amstrong placed on GI grid all as specified and directed:- (a) Suspended GI main runner 38 x 24 mm bulb Tee sections fixed with 4 mm dia GI bar @ 1200mm c/c , level shall be adjusted with fly/bionet screws. (b) Placed in position cross Tee 1200 mm long and 28.8 x 24 mm bulb Tee section @ 605 mm c/c using snap grid and bionet fixing arrangement to secure main runners. (c) Ceiling GI 28.8 x 24 mm fixed with PVC Rawl plugs and GI screws to secure with walls and all as per manufactures instructions complete all as specified and directed.

Demolition of cement concrete (unreinforced) not exceeding 15cm thickness in ground floors and pavings work complete all as specified and as directed.

M&L 25 mm thick cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in floor complete all as specified and as directed.

M&L 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finish complete all as specified and as directed.

M&L 10 mm thick backing coat in cement mortar 1:4 on stone masonry surfaces to recieve wall tiles complete all as specified and as directed.

M&L Vitrified ceramic tile 10mm thick (square /rectangular) polished ,area of each tiles not exceeding 0.36sqm, in floors/walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Glazed ceramic coloured tiles of size 450X 350X 7mm thick on vertical surfaces such as in dado complete all as specified and as directed.

M&L Joint free non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specfically provided (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L RCC type A1 1:1.5:3 (using 20mm graded stone aggregates) nominal mix as in beams/lintels complete all as specified and as directed.

M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking ,bending, spirally for hoping for columns hooking ends and binding with MS wire annealed not less than 0.90 mm dia complete all as specified and as directed.

All as per item No 17 hereinbefore but 6mm to 8mm dia complete all as specified and as directed.

All as per item No 17 hereinbefore but 6mm dia to 8mm dia as in stirrups complete all as specified and as directed.

M&L Form work to sides and soffits of floor or roof beams, lintels etc including supports, overhangs etc finished rough in flat complete all as specified and as directed.

Demolition of brick/stone/pcc block masonry built in cement mortar including all quoins, pillars etc and removing the debries from the premises complete all as specified and as directed.

M&L Precast cement concrete block masonry 1:3:6 type C1 using 20mm graded aggregate with solid block exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Taking down GI tubing and connection and removing to store of pipe 15mm bore complete all as specified and as directed.

Taking down GI tubing and connection and removing to store of pipe 20mm bore complete all as specified and as directed.

M&L 15mm bore unplasticized PVC pipe of pressure rating 10Kg f/cm² fixed complete on walls ceilings or on floor complete all as specified and as directed.

Ditto all as per item no 25 above, but 20mm bore complete all as specified and as directed.

S&F Stainless steel drapery rod 25mm dia incl side caps with brackets fixed to wall with suitable brass screws fixed in repairs complete all as specified and as directed.

S&F Bib taps chromium plated fancy type with flange 15 mm dia bore type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as fixed in repairs complete all as specified and as directed.

S&F Pillar taps chromium plated fancy type 15 mm dia bore type screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts ,screwed for iron pipe as fixed in repairs complete all as specified and as directed.

S&F Angular stop cock fancy type 15 mm dia bore type cast copper alloy chromium plated screw down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions as fixed in repairs complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F Stainless steel kitchen plate racks of 1 mm thick of overall size 900mmx 900 mm as per trade pattern as fixed in repairs complete all as specified and as directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and as fixed in repairs complete all as specified and as directed.

S&F Health faucet brass chromium plated jet spray including LDPE flexible cable with jet of 100mm long fixing to 15mm dia pipe as fixed in repairs complete all as specified and as directed.

Dismantling cast iron or reinforced concrete drain pipes or PVC pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S&F Vitreous China wash hand basin size 580 x 450 mm white with brackets and flat back including cutting for pinning in ends of brackets incl replacement of existing unserviceable WHB complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe incl replacement of existing unserviceable pedestal pan complete all as directed .

S&F PVC low level flushing cistern 10 liters capacity with accessories complete, including all connections, ISI marked as fixed in repairs complete all as specified and as directed.

S&F Plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as fixed in repairs complete all as specified and as directed.

S&F PVC SWR pipe single socketed in any length with rubber ring joints, 110mm, fixed to walls complete all as specified and as directed.

S&F PVC SWR pipes single socketed in any length with rubber ring joints, 110mm on floors complete all as specified and as directed.

S&F PVC SWR pipes single socketed in any length with rubber ring joints, 75mm on walls complete all as specified and as directed.

S&F PVC SWR pipes single socketed in any length with rubber ring joints, 75mm on floors complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm dia complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm dia complete all as specified and as directed.

S&F PVC SWR bends any radius 75mm complete all as specified and as directed.

S&F PVC SWR bends any radius 110mm complete all as specified and as directed.

S&F PVC SWR floor trap 75mm bore as fixed in repairs complete all as specified and as directed.

S&F grating square 150mm size of PTMT complete all as specified and as directed.

S&F Prelaminated particle board of 12mm thick exterior grade pre laminated both sides with decorative choice laminations fixed with screws as in kitchen cup board shutters and shelves and pelmet boxes etc as fixed in repairs complete all as specified and as directed.

S&F Continuous Piano hinges, mild steel, bright finish or electrogalvanised 30mm wide flaps as fixed in repairs complete all as specified and as directed

Taking down chowkat or frames n ot exc 1.5 sqm with shutters without taking off shutters from frame complete all as specified and as directed.

Taking down chowkat or frames exc 1.5 sqm but not exc 4 sqm each with shutters (without taking off shutters from frame) complete all as specified and as directed.

S&F Second class hardwood for plain solid ,straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as apecified and directed.

M&L Second class hard wood plain solid, straight chowkhats and frames with transomes or mullions, straight, for solid frames of any description, wrought, framed, double rebated on the solid, rounded or chamfered including weathering to transome, if required, put together with glue, pinned at joints complete all as specified and directed.

M&L Mild steel flat iron holdfast for securing new wooden frame and similar articles conforming to FE 290 Gde-E-165 complete all as specified and as directed.

M&L Cement concrete block masonry 1:2:4 type B1 using 20mm graded stone aggregate in for hold fast block including necessary formwork etc complete all as specified and as directed.

S&F 30mm thick plain, framed, panelled shutters (any number of panels) 2nd class hard wood, with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed.

S&F Factory made Second class hardwood Glazed and skeleton shutters 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F Stainless steel butt hinges, medium weight 75 mm size as per IS 21817 fixed with SS screws complete all as specified and as directed.

S&F Stainless steel butt hinges, medium weight 100 mm size as per IS 21817 fixed with SS screws complete all as specified and as directed.

S&F Aluminum anodized barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

S&F Aluminum anodized barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

S&F Extruded aluminum alloy handle fabricated type anodized 150 mm complete all as specified and as directed.

S&F Extruded aluminum alloy handle fabricated type anodized 100mm complete all as specified and as directed.

S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F Frosted glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F Stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of capacity 1000 litres hoisted and fixed in position all as specified in SSR Part I including dismantling of old existing water storage tank complete all as specified and as directed.

M&L Complete removal of existing treatment on surfaces of wall by scrapping down old treatment, preparing surface even and smooth using 1 mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed

M&L Preparation of new plastered surfaces of wall and preparing surface even and smooth using 1 mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed.

M&L Preparation of new surfaces of ceiling and applying 1 mm thick wall care putty for making the surface smooth and even including sanding each layer to receive next new layer and applying one coat of wall primer and applying two coats of oil emulsion distemper complete all as specified and as directed.

M&L Complete removal of existing treatment on surface of ceiling of applying 1 mm thick wall care putty for making the surface smooth and even including sanding each layer to receive next new layer and applying one coat of wall prime and applying two coats of oil emulsion distemper all as specified and as approved complete all as specified and as directed.

M&L Complete removal of existing treatment on surfaces of wall by scrapping down old treatment and applying two coats of exterior acrylic emulsion weather coat paint, white or tinted over a coat of exterior wall primer complete all as specified and as directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M&L Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Hard core of broken stone or boulder of gauge not exc 63mm deposited spread and leveled in layers not exc 15cm thick watered and rammed to true surface complete all as specified and as directed.

M&L 75mm thick in cement concrete type C2 1:3:6 using 40mm graded stone aggregate as in plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

S&F Framed work such as ornamental & intricate design in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe-290 Gde-E-165 complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

M&L Steel work rectangular/ tubular trusses as in purlins etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS specifications complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.

M&L Preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Dismantling of single layer mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Dismantling battens for tiles, of any size including tilting fillets, spaced exceeding 15cm complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section in any position, in framed work complete all as specified and as directed.

M&L Preparation of old plastered surfaces of wall and applying three coats of whitewash complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring of light, fan, socket or power complete, including fitting such as switches, ceiling roses, pendants, regulators, scokets etc. and making good distrurbed surfaces of walls, floor ceiling etc. complete all as specified and as directed.

Taking down old and u/s distribution board any type including/ sheet metal enclosures, after removing all connection and make good the disturbed surface complete all as specified and as directed.

M&L Point wiring complete with two runs of 1.5 Sqmm single core, PVC insulated, unsheathed copper conductor FRLS cable, multi-stranded 1100 V grade drawn through and including non-metallic rigid PVC conduit, concealed in wall complete, fixed in roof, etc with necessary fixing accessories such as bend, elbow, socket, saddles etc including provision of factory made galvanized prestressed steel terminal boxes modular cover plate frame or required module complete for One light /Fan / exhaust fan/bell point controlled by one modular switch with and including 1.5 sqmm, single core PVC insulated unsheathed copper conductor FRLS cables multi stranded, 1100 volt grade green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed for:- Note for Item no 93 to 98: - i) Wiring shall be done in proper colour coding i.e Red, Yellow, Blue, for phases Black for neutral and green for earth. ii) Cost for modular metal flush boxes modular frame of suitable module/size conceled to wall for mounting modular switch/sockets etc are included in the unit rate inserted. iii) Modular fittings such as switches, sockets, fan regulator etc will be measured and paid separately.

All as per item No 93 above but for One 3 pin, 5 Amps switch socket on same board with other switches complete all as specified and as directed.

All as per item No 93 above but for One 3 pin, 5 Amps switch socket on independent board complete all as specified and as directed.

All as per item No 93 above but for One 3 pin, 15/16 Amps switch socket on Indipendent board with FRLS cable of size 2.5 Sqmm with and including 2.5 sqmm copper conductor cable as earth continuity conductor green in colour and connected to common earth dolly complete all as specified and as directed.

All as per item No 93 above but for one sheet metal enclosure with two pin socket and one MCB SP 20A using copper cable of 4 Sqmm for phase and neutral including 4 sqmm copper conductor cable as earth continuity conductor green in colour and connected to common earth dolly complete all as specified and as directed.

All as per item No 93 above but for One light point controlled by two 2 way switch complete all as specified and as directed.

S&F Sheet metal enclosures with two pin socket and MCB single pole 20A, 10kA, 240V for AC point complete all as specified and as directed.

S&F Sheet Metal enclosure single door for DBs when MCBs to be used TPN-4 Way with 200 Amp rated bus bar complete all as specified and directed.

S&F Sheet metal enclosure factory made for MCB DB, SPN 4 way with 200 Amps bus bar 415 Volt, double door type, fixed/flushed on wall including electrically connecting up complete all as specified and directed.

S&F Sheet metal enclosure double door for DBs when MCBs to be used SPN-8 Way with 200Amp rated bus bar fixed in replacement complete all as specified and directed.

S&F RCCB FP 63 Amps,100 mA leakage protection 240 Volts B curve 10 KA including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F MCB TPN 40/63 Amps, 240 Volts B curve . 10 ka including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F MCB SP, 240 Volt, 6 to 32 Amps 240 Volts B curve 10 ka including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F MCB SPN, 240 Volt, 40 Amps 240 Volts B curve 10 ka including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F Bell push modular type 240 V 6 Amps including connecting up electrically all as specified and directed.

S&F Calling bell, AC, 240V, single pole including connecting up electrically complete all as specified and as directed.

S&F Modular switch, 240 V, two way, single pole, 6 Amps one module including connecting up electrically complete all as specified and as directed.

S&F Modular switch, 240 V, one way, single pole, 6 Amps one module including connecting up electrically complete all as specified and as directed.

S&F Socket outlet, 2/3 pin, 6 Amps, multipurpose, modular type, including connecting up electrically complete all as specified and directed.

S&F Modular switch, 240 V, one way, single pole, 16 Amps one module including connecting up electrically complete all as specified and as directed.

S&F Socket outlet, modular type, 2 in 1, 2/3 pin, 6 & 16 Amps, including connecting up electrically complete all as specified and as directed.

S&F Ceiling rose of polycarbonate, 3 terminal including connecting up electrically complete all as specified and as directed.

S&F Modular type fan regulator, stepped type 120 w, 2 module suitable for ceiling fan 230 v, 1200 sweep complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement LED B Lamp 10 watt complete all as specified and as directed.

Taking down unserviceable fluorescent tube light fittings, supply and fixing Decorative ultra slim linear LED 20 W (4ft) light fittings with extruded Aluminium, heat sink, environmental friendly, energy efficient ready to use pack of ELITE LED of 20 W LED 6000K, complete all as specified and as directed.

Taking down unserviceable tube light fitting and supply and fixing decorative ultra slim linear LED 10 W (2ft) light fittings with extruded Aluminium, heat sink, environmental friendly, energy efficient ready to use pack of E-LITE LED OF 10W LED 6000K, complete all as specified and as directed.

Taking down old unserviceable bulk heading fitting from wall and supply and fixing Building LED security light fitting. 35 watts Energy saving and environmental friendly long life, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP66 protection with suitable GI Bracket and flat iron bracings nut, bolt, washers etc complete all as specified and as directed.

M&L Sub Main wiring complete with copper conductor, multi stranded, FRLS, PVC insulated and sheathed, 6 Sq mm, 4 run 1100 volts grade, incl drawn through PVC suitable size counduit and 4 Sqmm 2 run for earthing including taking down old unserviceable complete. Notes:- (i) 4 wires of 6 sqmm for phase and neutral, 2 wire of 4.0 sqmm for earthing. (ii) Proper colour coding will be used. Combination of all three i.e, Phase, neural and earth are cosidered as one unit.

M&L Sub Main wiring complete with copper conductor, multi stranded, FRLS, PVC insulated and sheathed, 6 Sq mm, two run 1100 volts grade, incl drawn through PVC suitable size counduit and 6 Sqmm single run for earthing including taking down old unserviceable complete. Notes:- (i) Two wires of 6 sqmm for phase and neutral, one wire of 4.0 sqmm for earthing. (ii) Proper colour coding will be used. Combination of all three i.e, Phase, neural and earth are cosidered as one unit.

Cutting chases on wall of width 30 mm dia for concealing PVC conduit 20/25mm dia and making good the surface with plastering in cement mortar 1:4 and finish to match the existing surface and treated with existing treatment such as white wash/OBD/cement base paint etc complete all as directed.

All as per item No 123 here in before but width 50mm dia all as directed.

M&L Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron connected to earthing test point, main DB, panel board, continuous earth lead protected by 15mm bore GI pipe light grade, 20mm bore GI light grade pipe for watering, necessary excavation and earth work in any type of soil, PCC pit, RCC chamber cover with suitable reinforcement complete all as shown on electrical plate No 3 of SSR part-I of 2009 all as specified and directed. Note :- Rate quoted shall deem to include for GI earth and GI pipe lead upto 7.5m length.

Disconnecting and taking down exhaust fan and blades any size or sweep after dismantling and removal to trade workshop for repair/replacement of parts/painting etc complete all as specified and directed.

M&L Painting the exhaust fan including louvers of size 300/450mm sweep with two coats of synthetic enamel paint after cleaning and making the surface of oil/dust free, complete all as specified and directed.

Taking down ceiling fan any size or sweep after disconnecting, dismantling and removal to trade workshop for repair, complete all as specified and directed.

M&L Opening the unserviceable/burnt ceiling fan 1200/1400 mm sweep and cutting of old burnt copper winding and rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, testing and connecting for satisfactory run, complete all as specified and directed.

S&F Ball bearing of the ceiling fan (any sweep) as per existing size incl greasing/oiling in replacement complete all as specified and directed.

S&F gun metal bushes of surface size for ceiling fan/ceiling fan incl necessary mechanical work in replacement complete all as specified and directed.

S&F Cord cable, three core 0.5 Sqmm PVC insulated copper conductor cable for connecting ceiling fan in replacement complete all as specified and directed.

S&F Capacitor of of 2.5 MFD for ceiling fan in replacement complete all as specified and directed.

S&F Ceiling fan blade set of three heavy duty suitable for 1200/1400mm sweep in replacement complete all as specified and directed.

S&F MS canopy for ceiling fan 1200/1400mm sweep complete for various makes/model of fan, in replacement complete all as specified and directed.

S&F Switch piano, flush type 5 Amps, One Way complete all as specified and directed.

S&F Socket out let 5/6 Amps 3 pin flush type 5 pin for the same board complete all as specified and directed.

S&F Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required at site complete all as per specified and directed.

JEETH CONSTRUCTION