DAY TO DAY MAINTENANCE, CERTAIN PETTY REPAIRS AT ICGS VISAKHAPATNAM UNDER GE(I)(CG) VIZAG

Amount

Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed.

S&F of 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed.

S&F of 25 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs including dismatling of old unserviceable one complete all as specified and directed.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs including dismatling of old unserviceable one complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m complete all as specified and directed.

M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.

All as per item No. 8 here-in-before but except brick. (Note: Serviceable bricks retrived from demolition of brickwork catered here-in- before shall be re-used.)

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc including ranking out joints hacking for key scrubbing down with water etc.

M & L for rendering 15 mm thick cement plastering on wall surfaces in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only liquid water proofing compound complete all as specified and directed.

M & L for rendering 10 mm thick cement plastering on wall surfaces in cement mortar 1:6 on other than fair face of brick-work or concrete surface and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick cement plastering on ceiling surfaces in cement mortar 1:3 on concrete surface, finished the surface even and fair without using extra cement complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as ecommended by the manufacturer all as specified and as directed (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ).

M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of new platered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as in copings, cill & lintel etc including necessary formwork complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L 300x300x 7 mm coloured ceramic tiles (1st quality) as in vertical surfaces set and jointed in neat cement slurry and pointed in white/cloured including provison of 10 mm thick in cemnt mortar 1:4 complete all as specified and directed.

M & L for Vitrified,ultra charged, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty, glazing pin etc in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4.8 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sqm area each for carrying out repairs as required, and refixing in the same opening complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each area for carrying out repairs as required, and refixing in the same opening complete all as specified and as directed.

M&L for taking down aluminium or UPVC shutter, area n. exc 1 Sqm. for carrying out repairs as required, and refixing the shutters in same opening after removing the existing beading and fixing new rubber beading of suitable size with adhesive, as required complete all as required and as directed. (Note: Cost of removing rubber beading and fixing the same is deemed to be included in quoted rate.)

M&L for taking down and refixing the same existing aluminium door shutters for carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling as required complete all as required and as directed by engr-in-charge each shutter area n. exc 4 Sqm. (Note: Cost of removing rubber beading and fixing the same, overhauling of floor spring is deemed to be included in quoted rate.)

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sq. M each complete all as specified and directed.

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Cutting holes in brick walls exc half brick but n. exc fullbrick wall in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth not otherwise described and treating ends of posts, backs of chowkats, etc. with tar or coal tar or black paint, area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as per specification & drawing complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F 35 mm thick, factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 40 mm thick, factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

S & F 30mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, cham-fered or roun-ded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and directed.

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

S&F 75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed..

S&F 75 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed..

S&F 250mm SS sliding door bolt (heavy) with hasp, staple(bolt type) and fixing bolts and sliding bolts complete all as specified and directed..

S&F 150 mm long SS handles, pre fabricated type complete all as specified and directed..

S& F 300mm long SS tower bolts, pre fabricated type complete all as specified and directed.

S&F in repair 100 mm long SS handles, fabricated type complete all as specified and directed..

S&F in repair 20mm curtain rails/Hangar rods anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F in repair SS curtain rails with fixing brackets, stops, rollers etc complete all as specified and directed..

S&F in repairs single door handle with lock set of make Godrej or equivalent complete all as specified and directed.

S&F in repair Dorset mortise lock set -D Type(Model no MLSDORSS122 SS for main doors and as per site requirement complete all as specified and directed.

S & F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of length 150 mm complete all as specified and directed.

S & F in repair 300mm, mild steel rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

S & F in repair floor door stopper of SS and tongue with hard drawn steel spring, fixed in floor of length 150 mm complete all as specified and directed.

S&F in repair Auto hinges for cabinet case (Make ; GodrejKARF/HETICH) complete all as specified and directed.

S & F in repairs SS towel rail 600mm long fixed with & incl chromium plated brass screws and wooden/plastic cleats ( minimum wt 190 gms) complete all as specified and directed...

S & F in repairs SS towel rings round/circular or as per site requirement and match with existing product complete all as specified and directed...

S&F in repairs of Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F in repairs Aluminium extruded section body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

M&L for providing and injecting chemical emulsion for post construction anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene bnased solution )@ 0.5ltre/hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

S & F in repairs, 15mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 20mm dia Float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 25mm dia Float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 455 gms) complete all as specified and directed.

S & F 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fittingall complete all as specified and directed. .

S & F in repairs superior quality 15 mm dia CP 2 way bib cock with wall flanges fixed as all as specified complete all as specified and directed.

S & F in repairs SS bottle trap of having minium water seal of 25 mm of bore dia 32 mm complete all as specified and directed.

S & F in repairs bottle trap of PTMT having minium water seal of 25 mm of bore dia 32 mm of superior quality complete all as specified and directed.

S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make : Jaquar Cat No.CON-011KN or equivelant of make as per list of manufacturer's

S & F in repairs, Brass CP mixer for sink/basin, long swan neck, two way, high presssure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed down for iron pipe, 15mm bore and fixed complete all as specified and directed Make : Jaquar Cat No.CON-309KNBM or equivelant of make as per list of manufacturer's

S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaquar Cat No.CON-053KN or equivelant of make as per list of manufacturer's

S & F in repairs Fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as per site requirement complete all as specified and directed.

S & F in repairs Fancy type Pillar taps, cast copper alloy,with capstan heads,chromium plated,screwed down high pressure, with or without lettered'Hot' or'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed as per site requirement complete all as specified and directed.

S & F in repairs CP Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook, 15mm bore complete all as specified and directed. Make: Jaquar Cat No. ALD-565 or equivelant of make as per List of manufacturer's

S&F in repairs Syphon kits of Jaguar make for 10 Ltr Porcelene flush tank complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F in repair EWC-with integrated 10 Ltr Porcelene flush tank white (EWC) complete all as specified and directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs 32mm dia. PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S & F in repairs Stainless steel gratings 125mm dia. Round/square match with existing product fixed on floors/ nahani traps fixed with cement mortar complete as specified and directed.

S & F of Soft closing seat covers ( with automatically closing system) closed pattern with flat bottom, and cover and mild steel chromium plated hinging device as per site requirement complete all as specified and directed.

S&F in repair 32 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S& F in repairs plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings heads, shoes, bends, sawn-necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories).

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per description of item No 102 above but except pipe. (Note: Serviceable pipe retrived from item No. 101 shall be re-used.)

S&F in repairs 110mm bore PVC (SWR) bends of any radius and any type complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Disconnecting existing tanks of capacity of capacity exc. 250 Ltr but n.exc 500 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 500 Ltr but n.exc 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 1000 Ltr but n.exc 2000 Ltr,, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from PVC/RCC tanks of capacity not exc 500Ltrs and from mouths of circulating pipes, etc complete all as specified and directed.

All as per item No 109 here in before but exc 500 Ltrs but not exc 1000 ltrs capacity complete.

All as per item No 109 here in before but exc1000 Ltrs but not exc 2000 ltrs capacity complete.

Cleaning and removing all scale and dirt, etc, from RCC tanks of capacity from 5000 Ltrs to 25000 Ltrs., and from mouths of circulating pipes, etc complete all as specified and directed.

S&F in repairs vitreous china urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repairs vitreous china urinal partition white of size 310x700 mm with slabs terminating about 40 cm above floor line complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack, made out of 1.50 mm thick sheet for size 900 x 1200 x 250 mm fixed on wall with screw, washers. upto 4th floor complete all as specified and directed. .(Note: Rate shall be Including for necessary Safety Measures where required at site)

S & F in repairs Corner glass/sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M& L in repairs Medium density fibre board, exterior grade, fixed to timber framework with screws with commercial finish with both sides decorative laminate type 1 of 0.9mm thickness of any colour and pattern as approved, fixed with approved adhesive and complete all as specified and directed.

S&F 18 mm Plywood, grade BWR, type BB, fixed with screws to timber frame work as in cup board shelf/ pelmet boxes/kitchen cabinets of any size etc with commercial finish with both sides decorative laminate type 1 of thickness 0.9mm thickness any colour and pattern as approved, fixed with approved adhesive and other side balancing with white pvc laminate including taking down of old one complete all as specified and directed.

S&F in repairs Cupboard locks/wardrobe lock grade-I of size 50mm as per site requirement complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S &F in repairs of Decorative laminate type 1 of 1.5 mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive on plywood cupboards/floor mats etc. as per manufacturer's instruction complete all as specified and directed.

M&L 15 mm thick Mineral fibre ceiling tiles of size (600X600) mm with tegular edges all as per site requirement incl GI frame work for seamless ceiling with standard specification all as specified and directed including necessary dismantling and taking down of old false ceiling/Boards complete all as specified and directed.

Providing and fixing in repairs of Gypsum Board 12mm thick in ceiling fixed with screw incl GI frame work for seamless ceiling with standard specification all as specified and directed as per manufacturers instructions complete all as specified and directed.

RAVI VARMA JAMPANA (BID ID -3341725)

HARSHA CONSTRUCTIONS AND ENGINEERING WORKS (BID ID -3340873)

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS (BID ID -3342097)

SRI LAKSHMI GANAPATHI CONSTRUCTIONS (BID ID -3341545)

SRI DHANESWARI ENGINEERING WORKS (BID ID -3341527)

JAHNAVI ASSOCIATES (BID ID -3341856)

G VENKATA RAO (BID ID -3342164)