Construction of Shed over existing threshing floor at RARS, Maruteru

Construction of shed over existing threshing floor at RARS, Maruteru.

300 mm dia single under reamed piles Providing and laying of Single under reamed piles of 300 mm dia for foundations as per design including cost of drilling bore with augur and placing of reinforcement in positions and concreting with the RCC (1:1.5:3) prop with single under reamed bulb using 6 mm to 20 mm SS 5 HBG mechine crushed metal etc.Complete black cotton soils up to a depth of 2.4 mtrs including cost and conveyance of all materials to site, labour and all incidental and operational charges but excluding cost of steel and its fabrication charges etc.complete for finished item of work as directed by the department

Earth work excavation for foundations (Manual means) of buildings, septic tank,sump,compound wall in ordinary soilsand depositing on bank for all lifts and with an initial lead of 10m and depth upto 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads and contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Pilecap: VRCC M- 20 Nominal mix (using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDINGcost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work.

Providing Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.

100mm dia GI B Class pipe: Supplying & fixing GI B Class pipe properties & weight ISI mark in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.

80mm dia GI B Class pipe: Supplying & fixing GI B Class pipe properties & weight ISI mark in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.

Providing M.S. sections for truss, cladding members, purlins of required size and shapes of M.S hollow pipes, with necessary materials and cost and conveyance of all materials and labour charges for fabrication and fixing in position etc., complete as directed by the department

Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with self driven screws 14mm dia (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses including cost and conveyance of all materials , labour charges , overheads and contractors profit etc., complete for finished item of work in all floors.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.