Internal Electrification of HFRR

Amount

415V main incoming PCC panel

415V aux PCC-1 panel

Supply Installation Testing and commissioning of 415V aux PCC-2 panel as per tender specification and drawing

Supply Installation Testing and commissioning of 415V Control Panel as per tender specification and drawing

Supply Installation Testing and commissioning of Timer Panel as per tender specification and drawing

EPCC P7 panel

EPCC P9 panel

EPCC P10 panel

EPCC EP10 panel

EPCC EP11 panel

EPCC EP12 panel

EPCC EP13 panel

600 X 600 LED Surface mounted lighting fixture.

300 X 300 LED Surface mounted lighting fixture

22W LED Batten Type Surface mounted lighting fixture.

40W LED Batten Type Surface mounted lighting fixture.

12W LED Round Type Surface mounted lighting fixture

5W LED Surface mounted mirror lighting fixture

120W LED Highbay Lighting Fixture

1200mm sweep BLDC Ceiling fan with regulator & safety wire.

200mm diameter PVC Exhaust fan with automatic shutter.

12 inch diameter metal exhaust fan with metal louvers.

15 inch diameter metal exhaust fan with metal louvers.

18 inch sweep industrial grade wall mounted circulator fan.

Supply of nominal insulating mat 2.5 mm +/- 10% thick and 1 m width conforming to IS 15652: 2006 and meeting the requirement of IS: 5216 (Part 1, 2 &3), IS 8437, IEC-479 Pub-1 & as per of IS: 15652 and suitable for class - B upto 11 kv, Make -Electromat or equivalent OEM

40 mm dia Earth electrode with earth pit

GI strip of 50mm X 6 mm.Strip. Installation of GI strip to be done along cable tray and on the wall. Connection of GI strip with cable tray with nut and bolts, distribution board is be done by nut and bolts. Installation along wall includes Insulator to be installed on wall at every 1 meter length of gap of strip. Bending of GI strip and taking out through hume pipe and connecting to earthing pit is included in the scope of work. Cost of Insulator and nut bolt, lugs is included in quoted rate.

MS item includes various sizes of L angle, C channel, metal sheet of various thickness. These items will be used for various purposes like creating support structure for the cable trays, checkered plates for covering the trenches. Fabrication including Cutting , welding , Red oxide painting and enamel paint, cost of welding rod is to be included in quoted rates.

150mm width Cable Tray.

300mm width Cable Tray.

450mm width Cable Tray.

TPN DB of 8way with acryllic door

Cable end box suitable for TPN DB of 8 way

SPNDB of 12 way

6 /10/16 amp SP C type

16 amp DP C type

16 amp 4P B type MCB

32 amp 4P C type MCB

63 amp 4P C type MCB

40 amp 2P RCCB of 30 ma sensitivity

6/16 Amp universal socket

6 Amp 1 modular Switch with indication light

1 modular weather proof (IP55) switch box & adaptor with pvc membrane containing 1 number of switch. (Equivalent to Legrand IP55 Plexo box with PVC membrane.)

6 Amp 1 modular 2 way switches

16 Amp 1 modular Switch with indication light

16 Amp starter for controlling of AC points

1 module/2 module cover plate with frame

3 module cover plate with frame

4 module cover plate with frame

6 module cover plate with frame

1 module / 2 module plastic surface box

3 module plastic surface box

4 module plastic surface box

6 module plastic surface box

Point wiring with 1.5 sq mm wire. Each wiring circuit consist of phase wire, neutral wire, earth wire. The average length of each wire(i.e. phase, neutral & earth) is (5±2) meter individually. Wiring in same flush box is not consided to be separate wiring point

Point wiring with 1.5 sq mm wire. Each wiring circuit consist of phase wire, neutral wire, earth wire. The average length of each wire(i.e. phase, neutral & earth) is (15±5) meter individually. Wiring in same flush box is not consided to be separate wiring point

Point wiring with 1.5 sq mm wire. Each wiring circuit consist of phase wire, neutral wire, earth wire. The average length of each wire(i.e. phase, neutral & earth) is (30±7) meter individually. Wiring in same flush box is not consided to be separate wiring point

Point wiring with 1.5 sq mm wire. Each wiring circuit consist of phase wire, neutral wire, earth wire. The average length of each wire(i.e. phase, neutral & earth) is (50±10) meter individually. Wiring in same flush box is not consided to be separate wiring point

Point wiring with 2.5 sq mm wire. Each wiring circuit consist of phase wire, neutral wire, earth wire. The average length of each wire(i.e. phase, neutral & earth) is (20±5) meter individually. Wiring in same flush box is not consided to be separate wiring point

Point wiring with 2.5 sq mm wire. Each wiring circuit consist of phase wire, neutral wire, earth wire. The average length of each wire(i.e. phase, neutral & earth) is (10±3) meter individually. Wiring in same flush box is not consided to be separate wiring point

Point wiring with 2.5 sq mm wire. Each wiring circuit consist of phase wire, neutral wire, earth wire. The average length of each wire(i.e. phase, neutral & earth) is (6±2) meter individually. Wiring in same flush box is not consided to be separate wiring point

Point wiring with 4 sq mm wire. Each wiring circuit consist of phase wire, neutral wire, earth wire. The average length of each wire(i.e. phase, neutral & earth) is (25±5) meter individually. Wiring in same flush box is not consided to be separate wiring point

Point wiring with 3C x 1.5 sq mm Tough Rubber Sheathed cable of average length (30+/-5) meter. Installation to be done at highbay height of 13 meter.

Point wiring with 3C x 1.5 sq mm Tough Rubber Sheathed cable of average length (6+/-2) meter. Installation to be done at highbay height of 13 meter.

Point wiring with 3C x 1.5 sq mm Tough Rubber Sheathed cable of average length (25+/-5) meter. Installation to be done at highbay height of 8 meter.

Point wiring with 3C x 1.5 sq mm Tough Rubber Sheathed cable of average length (6+/-2) meter. Installation to be done at highbay height of 8 meter.

25 mm MS conduit with 1.6 mm thickness

metallic junction box for interconnection of conduit of 25 sq mm

Metallic flexible pipe of 25 sq mm along with rolling flexible PVC rolling tape. The metallic flexible pipe to be connection to metallic junction boxes with metallic clamp. The cost of clamp is included in this quoted rate

PVC Casing and caping of 1 inch width along with all related accessories like elbow bends, t bends, all press fit bends. Prices of accessories to be included in the quoted price.

100mm X 100mm PVC box

3.5 C x 400 Sq.mm ,1.1kV xlpe extruded insulation, Aluminium cable, with FRLS sheath, round armoured

3.5 C x 120 Sq.mm ,1.1kV xlpe extruded insulation, Aluminium cable, with FRLS sheath, round armoured

3.5 C x 50 Sq.mm ,1.1kV xlpe extruded insulation, Aluminium cable, with FRLS sheath, round armoured

4C x 16 sq mm 1.1 kv, xlpe extruded insulation, copper cable, with FRLS sheath, round armoured

12C x 2.5 sq mm 1.1 kV, PVC extruded insulation, copper cable, with FRLS sheath, round armoured

End termination 3.5 C x 400 Sq.mm ,1.1kV xlpe extruded insulation, Aluminium cable

End termination 3.5 C x 120 Sq.mm ,1.1kV xlpe extruded insulation, Aluminium cable

End termination 3.5 C x 50 Sq.mm ,1.1kV xlpe extruded insulation, Aluminium cable

End termination 4 C x 16 Sq.mm ,1.1kV xlpe extruded insulation, copper cable

End termination for 12C x 2.5 sq mm copper cable

2250 VA inverter of 24 volt input & 230 V output

250 AH Battery

Supplying, lowering, laying approved 300 mm dia RCC pipes (Class NP2) of IS:458 with necessary collars, laid to correct grade & levels at 1m depth, including cutting to lengths, jointing with hemp yarn & cement mortar 1:1, caulking the joints, & finishing, curing, testing all as per directions of Engineer-in-charge. Cost including excavation upto depth of 1200mm , materials and labour, including hoisting, placing in position by manual or mechanical means and as directed by the Engineer-in-charge including testing of joints etc.

Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 coarse river sand/crushed stone sand,6 graded stone aggregate of maximum size 20mm) including consolidation, finishing, curing, etc.

Earth work excavation

Physical protection of LT cable

Metal sheet box with dimensions (200mmX200mmX100mm). The (200mmX200mm) face of the box shall be openable. The box shall have provisions of knockout of cable glanding with fixing arrangement on wall using nut & bolts. The box shall be made up of seven tank treated, powder coated, oven baked, 3mm thick sheet.

Supply and Installation of 16 sqmm copper flexible single core wire with flame retardent, PVC compound, green colored insulation.

Supply, installation, testing and commissioning of white PVC trunking body of section 150 mm X 50 mm. The body should be able to partitioned into two 65 mm sections. The rate of body joints to be included in the quoted rates.

Supply, installation, tesing and commissioning of white PVC Partitions Separations. These are used to do partitioning in item no. 25.1

Supply, installation, testing and comissioning of white PVC flexible snap on covers of width 65mm to be installed over item no. 25.1. The rate of cover joints to be included in the quoted rates.

Supply, installation, testing and comisssioning of white PVC End Caps to be applied on terminals of item no. 25.1

Supply, installation, testing and comisssioning of internal angles to be used to provide curvature to bus trunking system at the corners. The cost of partition angles to be included in the quoted rates.

Supply, installation, testing and comisssioning of external angles to be used to provide curvature to bus trunking system at the corners. The cost of partition angles to be included in the quoted rates.

Supply, installation, testing and comisssioning of flat angles to be used to provide curvature to bus trunking system at the corners. The cost of partition angles to be included in the quoted rates.

Front adapter plate of 6 module for item no 25.1 to accommodate item nos 25.9 and 25.10 of legrand make or similar

6/16 universal shuttered socket 2 module to be installed in bus trunking system

Switch-20A-Single Pole-1way with indicator-1 module to be installed in bus trunking system

Arken Solutions Pvt. Ltd