Various types of BONNET ROUGH (Med) Machining for TOA Valve Assy, FAVTA4850.

Select, Excess (+), Less (-)

Tender Inviting Authority: Pandiaraja M

Name of Work:Various types of BONNET ROUGH Machining for TOA Valve Assy. .

Contract No: FAVTA4850

Name of the Bidder/ Bidding Firm / Company : Vendor Code:

Sl. No. Material Description Material Code Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate In Figure (INR- Indian Rupee) / Unit GST (If applicable in Percentage) GST Amount in Rs. P SCOPE HSN / SAC Code

BONNET ROUGH-W024 931113338000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-W018 931114968000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-L029 931117108000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-L032 931117118000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-L033 931117228000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-L036 931117238000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-L003 931117748000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation de

BONNET ROUGH-L012 931117758000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-W409 931130098000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-L177 931135198000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection.

BONNET ROUGH-L180 931135208000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-L169 931135218000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-L172 931135228000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-L377 931193018000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-L380 931193028000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final ins

BONNET ROUGH-L385 931193038000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-L388 931193048000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-L393 931193058000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-L396 931193068000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-V449 931198728000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-V452 931198738000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-V145 931198808000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-V148 931198818000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-V329 931198828000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-V332 931198838000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-V345 931202158000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-V348 931202168000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-V177 931202978000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final ins

BONNET ROUGH-V180 931202988000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-V393 931203068000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-V396 931203078000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final ins

BONNET ROUGH-V129 931210738000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-V132 931210748000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final ins

BONNET ROUGH-V353 931211028000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final ins

BONNET ROUGH-V356 931211038000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V491 931212968000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-WA33 931230338000 No Excess(+) Full Conversion INR Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-WA36 931230348000 No Excess(+) Full Conversion INR Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-L077 931236938000 No Excess(+) Full Conversion INR Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-V544 931239388000 No Excess(+) Full Conversion INR Machining all operations as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final in

BONNET ROUGH-L427 931242988000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-L429 931243098000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-L428 931243108000 No Excess(+) Full Conversion INR Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-V566 931243488000 No Excess(+) Full Conversion INR Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-SBLW 931245828000 No Excess(+) Full Conversion INR "Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-L439 931246338000 No Excess(+) Full Conversion INR Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-SBL1 931247458000 No Excess(+) Full Conversion INR Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-WC20 931247918000 No Excess(+) Full Conversion INR Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-WC21 931247928000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final ins

BONNET ROUGH-SBL4 931249938000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V636 931250248000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V638 931250268000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-WC67 931250608000 No Excess(+) Full Conversion INR "Machining all operation as per drg. All diameter should be concentric. Punch material code,identification mark and firm code. Final

BONNET ROUGH-WC81 931251258000 No Excess(+) Full Conversion INR full scope as per drawing

BONNET ROUGH-V657 931251478000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentricPunch material mark ,firm code and attest.Final inspection .

BONNET ROUGH-SBL5 931251648000 No Excess(+) Full Conversion INR Machining all operations as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final in

BONNET ROUGH-V661 931251818000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V663 931251838000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-SLB8 931252118000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V688 931253268000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V726 931256278000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V727 931256288000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-LD30 931256508000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V737 931258088000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Punch material code,firm code and attestation detail.Final insp

BONNET ROUGH-V766 931281268000 No Excess(+) Full Conversion INR Machining all operations as per drg.All diameter should be concentric.Punch material code,identification mark and firm code.Final in

BONNET ROUGH-LD34 931281418000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-V728 931282508000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-LD38 931284538000 No Excess(+) Full Conversion INR Machining all operation as per drg.All diameter should be concentric.Drill and tap.Punch material code,firm code and attestation det

BONNET ROUGH-LD40 931285648000 No Excess(+) Full Conversion INR Machining all operation as per drg.

Total in Figures

Quoted Rate in Figures Select %

Quoted Rate in Words

Please Enable Macros to View BoQ information