Special repair to Streetlight and related items in RB and New Parade Ground, Baffle Range, Barrack (G+3), Gurudatt building and Main Road at SRPTC, Chowky, Dist:- Junagadh

No. In Figure In Words

1 Providing & Erecting 2.0 mtr. long Earthing system by making 4.00 Each 7025.00 Rupees Seven

minimum bore of 225 mm dia. in soft soil. Suitable for doing pipe-in- Thousand

pipe technology earthing. Earthing electric rod must be made from Twenty Five Only

Corrosion free hot dip galvanizing pipes having following

specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class

ISI mark of Reputed Brand, Inner pipe: - 42 mm minimum O.D., Pipe

B Class ISI mark reputed Brand. Terminal Size: 70 mm X 100 mm

length, Terminal should be made from inner pipe for that pipe must

be pressed and gave rectangular shape so its work as a terminal.

The hot deep galvanising must be done after above process.

Galvanised thickness must be minimum 75 micron anywhere. SS Nut

bolt:- 2 nos. with washer suitable for 14 mm dia. hole must be

provided at terminal. Total minimum Weight (approx.) of earth

electrode with inside conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to

retain moisture for long time. Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of

mm X 400 mm X 400 mm depth and Cover should be heavy duty

cast iron with required size of 300 mm X 300 mm X 4 mm thick.

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing. Earthing

value must be measured with earth tester. Agency has to bring the

earth resistance to at least 02 ohms & voltage between neutral &

Earthing upto 02 volt. Agency has to maintain earthing & its value for

one year. Earthing must be done in the presence of A.E. (GSPHCL)]

2 For Earthing Additional charges for boring in hard rock soil (by 4.00 Each 276.00 Rupees Two

Breaker)& filling soft soil in earth pit. (Certificate for soil have to given Hundred Seventy

by DEE/AE along with Photographs) Six Only

3 Providing & fixing double compressed heavy duty flange type brass 150.00 Each 43.00 Rupees Fourty

cable gland with rubber ring for P V C insulated armoured cable Three Only

complete with outgoing tails, insulating tape etc. For following size

cables.. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet Make

4 Supplying & erecting 12 mm thick Hylum sheet on existing 25 x 25 x 2.00 Sq. 2289.00 Rupees Two

3 mm red oxide painted angle iron frame suitable for fixing ICDP / Mtr. Thousand Two

ICTP / DPMCB / FPMCB SWITCH and energy meter (contractor Hundred Eighty

shall make approved drawing of Hylum sheet to arrange required No. Nine Only

of Energy meter & ICDP / ICTP / DPMCB / FPMCB switch-busbar

etc. as per Actual space available in electrical room at site)

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

5 Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte 300.00 Mtr 141.00 Rupees One

multi stranded, annealed copper conductor with heat resistant PVC Hundred Fourty

insulated conforms to IS:694, IEC - 227 erected in existing pipe of One Only

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (Conductor resistance should

be as per IS:8130/1984) One wire 16.00 sq. mm

6 Providing and erecting bracket consisting of ISI mark "B" class G.I. 34.00 Each 487.00 Rupees Four

Pipe 4.2 cm outside diameter complete with suitable G.I. Sleeve Hundred Eighty

tubing of 2 mm. thick and required size and length suitable for 76.5 / Seven Only

80 mm. required size of pole top having nuts and bolts for fixing the

brackets and having spread of Upto 0.70 mtr. length with suitable

rise as per site condition and suitable welded stiffner reducer and

nipple with check nut complete painted with one coat of red oxide

and two coats of alluminium paint. or Single arm bracket suitable for

terrace as per design given by EIC (Jindal / Asian / Tata / Surya

Prakash make Only) (FabricatoRupees - Ambica / Fab / Bajaj /

Impression equipment Only) (Test certificate to be submitted) (a)

For Single arm bracket

7A Providing and erecting bracket consisting of ISI mark "B" class G.I. 25.00 Each 608.00 Rupees Six

Pipe 4.2 cm outside diameter complete with suitable G.I. Sleeve Hundred Eight

tubing of 2 mm. thick and required size and length suitable for 76.5 / Only

80 mm. required size of pole top having nuts and bolts for fixing the

brackets and having spread of 1.00 mtr. length with suitable rise as

per site condition and suitable welded stiffner reducer and nipple with

check nut complete painted with one coat of red oxide and two coats

of alluminium paint. or Single arm bracket suitable for terrace as per

design given by EIC (Jindal / Asian / Tata / Surya Prakash make

Only) (FabricatoRupees - Ambica / Fab / Bajaj / Impression

equipment Only) (Test certificate to be submitted) (a) For Single

arm bracket

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

7B For Double arm bracket 19.00 Each 821.00 Rupees Eight

Hundred Twenty

8 Supplying following size of Light duty “A” Class G.I . Pipe & erecting 130.00 Mtr. 171.00 Rupees One

as directed by Engineer-in-charge. (a) For 25 mm dia Hundred Seventy

9 Supplying & erecting approved make SMC press moulded 70.00 No 890.00 Rupees Eight

composite FRP loop-in, loop-out approx. 2mm thick box complete Hundred Ninety

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting Only

mob & hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of

following size of box. (A) 300 mm x 200 mm x 100 mm [deep]

10 Providing & making 1:2:4 cement concrete foundation & 70 % 5.00 Each 801.00 Rupees Eight

PCC from bottom including excavation for the pole of size 45 x 45 x Hundred One

100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or Only

45 cm dia x 45 cm) high upper ground level with necessary curing

and finishing in approved manner.

( for 4 & 6 mtr pole)

11 Breaking existing C.C. Foundation upto 0.5 mtr level and make the 23.00 Each 950.00 Rupees Nine

new C.C Foundation as per above item for the same. Hundred Fifty

12 Providing and making of Coil Type Earthing Having coil Made From 63.00 Each 369.00 Rupees Three

8 SWG Hot Deep Galvanized iron Wired wrapped On 50 MM OD Hundred Sixty

Round Pipe Having Minium 50 Turn( Approximately 200 mm lenght) Nine Only

& Having Contineous lenght Of 3 Mtr Gi wire To Connect Earthing

Bolt & Burried In Specially Prrepared Earth Pit Complete With Salt &

Charcoal/Coke As Required For Coil Type Earthing (Approximately

Weight Of Coil 1 To 1.1 KG)

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

13 Drilling the road without breaking the road surface (Asphalt) for 30.00 Mtr. 488.00 Rupees Four

laying of cable for feeding power supply by making up to following Hundred Eighty

size of holes at both ends complete. (A) Up to 100 mm bore dia. Eight Only

14 Providing, erecting, fabricating the M.S. structure as per requirement 150.00 Kg. 75.11 Rupees Seventy

of site as per structure design Including proper size approved by Five and Paisa

EIC of M.S. angles, flats, bars, square pipe, channels, sections Eleven Only

(Tata, Jindal, Asian, JSI Make) complete with cutting, welding,

grinding and finishing duly painted with Asian/Nerolac make premium

quality oil paint and true care red oxide metal primer,asian paint

make with erection on site as per direction of engineer in charge with

necessary grouting cementing, plastering and finishing complete. All

hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

15 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 450.00 Mtr. 46.00 Rupees Fourty

kv grade ISI marked copper wires of following size to be erected as Six Only

directed. (a) 3 core 1.5 sq.mm. PVC insulated round copper wire

16 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 260.00 Mtr. 77.00 Rupees Seventy

kv grade ISI marked copper wires of following size to be erected as Seven Only

directed.(b) 3 core 2.5 sq.mm. PVC insulated round copper wire

17 Providing & erecting approved make XLPE (IS:7098) (I)-88 ISI mark 2900.00 Mtr. 361.00 Rupees Three

armoured multistrand Copper Cable 1100 volt to be laid 90 cms. Hundred Sixty

Under ground or to be laid on wall with 1.0 mm thick G.I. heavy One Only

guage cable clamp or in existing DWC pipe underground or road

crossing or floor of following size of cables.(d) For 4 core x 4.0 mm2

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

18 Providing & fixing Solderless crimping type Copper lugs conforming 1200.00 Each 8.00 Rupees Eight

to IS suitable for cable of following size evenly crimped with high Only

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

19 Providing & laying HDPE Double walled corrugated pipes (DWC) 1850.00 Mtr. 117.00 Rupees One

(conforming to IS: 16205 (part 24) 2018)) with minimum load required Hundred

of 450N capacity with anti rodent and ultra violet material properties Seventeen Only

with necessary connecting accessories of same material at required

depth to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the same to

make ground as per original. (A)For Outer dia.50 mm and Inner

dia. 38mm (Test Certificate to be Submitted)

20 Supplying and erecting Galvanized iron pipe post ISI mark 'B' 11.00 Each 4397.00 Rupees Four

class 88.9 mm. O.D. 6 mtrs. Long duly painted with two coats of Thousand Three

alluminium paint and metallic base plate of 300 x 300 x 4 mm. thick Hundred Ninety

to be erected as a compound light pole with wire entry nipple and Seven Only

earthing bolt. Approximate weight of pole 47 Kg. within permissible

limits as per IS effective length of sections Bottom: 5.5 mtr. having

outside dia. 88.9 mm. Top: 0.5 mtrs. having outside dia. 76.1 mm. (

ISI test certificate from pipe manufacture &

Class/make/length/O.D/wall thickness/GI/ MS/ Weight test certificate

from pole manufacture shall be submitted) (Jindal / Asian / Tata /

Surya Prakash make only For G.I Pipe) (Manufacturer's make

Ambica,Fab,Bajaj only,Test Certificate to be Submitted)

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

21 Supplying and erecting approved make Octagonal pole made from 20.00 Each 11410.00 Rupees Eleven

HR sheet steel. The pole should be made as per IS. and shall be Thousand Four

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable Hundred Ten

suspend local wind speed with integral Junction box with Hot Deep Only

Galvanised door having 2 nos. 180° operated hinges & 2 nos. Ln key

locking with silicon rubber gasket. Consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail & MCB

Brass stud type terminal and arrangement for cable termination to

be erected on RCC foundation as per details given by manufacturer

and EIC considering site requirement.

Foundation Details: 1) Grade of RCC 1:2:4, 2) Grade of steel

rainforcement of RCC FE 415, 3) Clear cover to rainforcement

50mm, 4)Concrete vibrated, 5) use suttering / farma, 6)Hot deep

galvanized average 70Micron, 7) Detail drawing will be given by

corporation. (Make:- Bajaj, Valmont, Ambica, Transril)

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm

long hot deep galvanized J-Bolt, nuts, washers with 1300mm under

ground and 200mm above ground level and 450mm dia. Foundation

in 1:2:4 proportion.

22 Painting of Streetlight pole with bracket complete with primer with 41.00 Each 263.00 Rupees Two

two coats of Aluminium paint for following size of pole.Up to 6 Mtr. Hundred Sixty

Three Only

23 Providing & erecting 240 V MCB double pole switch for motor & 5.00 Each 327.00 Rupees Three

inductive load (C Curve) having 10 KA breaking capacity & Hundred Twenty

confirms to IS : 8828 in existing box having following capacity (B)For Seven Only

40 Amp. DP

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

24 Providing and erecting Medium Class FIA approved and ISI mark 250.00 Mtr. 33.00 Rupees Thirty

white colour (embossed) RIGID PVC PIPES of following size Three Only

complete erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & clamps on / in wall / ceiling along with

continuous fish wire to draw mains with necessary fittings and

junction boxes for following dia. For 25 mm dia.

25 Providing, erecting, testing and commissioning insu intelligent street 3.00 Each 20255.00 Rupees Twenty

light controller specially designed for energy saving in conventional Thousand Two

street light system ( Cat. no. SLC-03-1Ph-15 KVA-20 Amp. per Hundred Fifty

phase) having technical specification, 1 phase 2 wire, 230 V AC/ph, Five Only

+/- 25% R Y B N 2 wire supply system, 50 Hz (+/- 10%) 2 W (Stand

BY) to 4 W (at street light operation) consumption, Advance 8 bit

micro controller, switching on longitude and latitude base, accuracy

of +/- 1 minute per month, with in built battery, with battery life of

more than 8 years, with special device which hold the parameter for

more than 10 year without any power and password protected.

16 characters and two line LCD display with backlight, 4 keys user

friendly keyboard system, 7500/15000 VA feeder pillar capacity,

60/100 Amps isolator, 3 output with termination, 40/63 Amps 2/3 pole

contactor, 3 X 16 Amp., with FR cable provision to by pass by way of

relay operation through auto/manual switch, 2 to 55 centigrade and

humidity 90 % non condensing, Out door type installation on pole

with clamps (Provided with clamps and nut bolt) or wall or floor,

Three locking system flush type internal panel lock, external pad lock

and internal U clamp locking systems for against theft of Panel,

having 17/25 Kg weight, 18 Gauge MS weather proof box with

industrial exterior powder coated with 7 tank process RAL

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

26 Providing & Erecting Univesal Astro interlligent Street light 2.00 Each 12895.00 Rupees Twelve

Control Syatem insu with weather proof box for indoor allplication Thousand Eight

5KVA ( as Per atteched Specification) Hundred Ninety

27 SITC of Outdoor aesthetically designed LED Street Light Luminaire 73.00 Each 3512.00 Rupees Three

with total consumption of Max. 45 W with single piece die cast Thousand Five

aluminium housing, high power LED shall be mounted on high quality Hundred Twelve

metal core PCB with extremely precison designed heat sink Only

complete with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket mounting.

The fixture to comply both LM79 and LM 80 guidelines with LED

module min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs,

provided with high quality polycarbonate lenses for better light

distribution. The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for protection

against high and low Voltage cut Off, opertional for high amibient and

high humid envirnoments, THD of driver should be less than 10%

and P.F > 0.95. Also the Fixture should meet the following technical

criterias Oprating range Voltage 160 to 270 V, system efficiency >=

110 lm/w, and total lumens not less then 4950, CCT > 5000K, CRI >

65, beam angle 120 deg, 4kV integral & non integral surge immunity

level at least 10 KV non integral..The Separate Potted driver should

have over current, over voltage protection, short circuit protection so

that the fixture recovers once the fault is removed. In addition to the

above product should be operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH. (Note:- The

manufacturer / authorized Channel partner of the manufacturer has

to submit 5yrs free replcement Guarantee for complete Fixture)

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

28 SITC of Outdoor aesthetically designed LED Street Light Luminaire 13.00 Each 6701.00 Rupees Six

with total consumption of Max. 120 W with single piece die cast Thousand Seven

aluminium housing, high power LED shall be mounted on high quality Hundred One

metal core PCB with extremely precison designed heat sink Only

complete with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket mounting.

The fixture to comply both LM79 and LM 80 guidelines with LED

module min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs,

provided with high quality polycarbonate lenses for better light

distribution. The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for protection

against high and low Voltage cut Off, opertional for high amibient and

high humid envirnoments, THD of driver should be less than 10%

and P.F > 0.95. Also the Fixture should meet the following technical

criterias Oprating range Voltage 160 to 270 V, system efficiency >=

110 lm/w, and total lumens not less then 13200, CCT > 5000K, CRI

> 65, beam angle 120 deg, 4kV integral & non integral surge

immunity level at least 10 KV non integral..The Separate Potted

driver should have over current, over voltage protection, short circuit

protection so that the fixture recovers once the fault is removed. In

addition to the above product should be operational in the

temperature range of 0 deg to 50 deg and humidity range of 10% to

90% RH. (Note:- The manufacturer / authorized Channel partner of

the manufacturer has to submit 5yrs free replcement Guarantee for

complete Fixture)

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

29 SITC of Outdoor aesthetically designed LED Flood Light Luminaire 21.00 Each 6228.00 Rupees Six

with total consumption of maximum 90 W with single piece die cast Thousand Two

aluminium housing, LED's mounted on high quality metal core based Hundred Twenty

PCB with extremely precison designed heat sink, complete with IP66 Eight Only

protection Class, with polycarbonate / Toughened glass cover. The

fixture should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED minimum

lumen/watt with L70 at 50,000 hrs, provided with high quality

polycarbonate Seperate lenses for better light distribution. The

Fixture Should be able to be Pole Mounted and also bracket

mounted, provided with high quality potted driver for protection

against, high and low Voltage cut Off, opertional for high amibient

and high humid envirnoments, THD of driver should be less than

10% and P.F > 0.95. Also the Fixture should meet the following

technical criterias. Operating range Voltage 160 to 270V, system

efficiency > 110 lm/w, CCT > 5000K, CRI >65, beam angle 120 deg,

4kV integral & non integral surge immunity level at least 10 KV non

integral... Flood Light lumens shall be more than 9900 (Note:- The

manufacturer / authorized Channel partner of the manufacturer has

to submit 5yrs free replcement Guarantee for complete Fixture)

It. Estimate Quoted Rate in

Description of Item Qty Unit Amount

No. In Figure In Words

30 SITC of Outdoor aesthetically designed LED Flood Light Luminaire 6.00 Each 7395.00 Rupees Seven

with total consumption of maximum 120 W with single piece die cast Thousand Three

aluminium housing, LED's mounted on high quality metal core based Hundred Ninety

PCB with extremely precison designed heat sink, complete with IP66 Five Only

protection Class, with polycarbonate / Toughened glass cover. The

fixture should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED minimum

lumen/watt with L70 at 50,000 hrs, provided with high quality

polycarbonate Seperate lenses for better light distribution. The

Fixture Should be able to be Pole Mounted and also bracket

mounted, provided with high quality potted driver for protection

against, high and low Voltage cut Off, opertional for high amibient

and high humid envirnoments, THD of driver should be less than

10% and P.F > 0.95. Also the Fixture should meet the following

technical criterias. Operating range Voltage 160 to 270V, system

efficiency > 110 lm/w, CCT > 5000K, CRI >65, beam angle 120 deg,

4kV integral & non integral surge immunity level at least 10 KV non

integral... Flood Light lumens shall be more than 13200 (Note:- The

manufacturer / authorized Channel partner of the manufacturer has

to submit 5 yrs free replcement Guarantee for complete Fixture)

31 Supplying & fixing box for housing ELCB + MCB combination made 5.00 Each 272.00 Rupees Two

of 18 SWG sheet steel duly powder coated with gasket, dust & Hundred Seventy

vermin proof bakelite shield two earthing terminals for following type Two Only

of RCCB, ELCB, ELCB + MCB (a) For 2 pole

Total in Rs.

Contractor Signature Ex.Engg,(Ele.)(SP)

G.S.P.H.C.Ltd,