Construction of new 33 kv line from 220 kvS/SFaridpur to tapping point of 33/11 KVS/SKuwatanda in district Bareilly.

Amount

Note - Any material/Labour required to complete the work (which is not covered in above) will be provided by the firm.

Carriage of following line materials for 33KV line from Store Centre Bareilly to site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site. (Distance upto approx. 25 km)

STP 11Mtr. long

PCC Pole 9 Mtr. Long

Cross Arm Channel 100x50mm V type

33 KV Pin insulator

33 KV Pin with nut

11 KV Disc insulator B&S type 7000 kg.

Disc fitting Dog/raccon 7000kg.

ACSR dog conductor

33 KV 3x300mm XLPE Cable

33KV 3x300mm cable joitng kit O/D

33 KV 3x300mm cable jointing kit S/through

G.I. Wire 8 SWG

MS earthing rod of 20x2500mm.

Top channel 125x65x6mm 3200mm long with clamp (13.10 Kg/M)

M.S angle lron 65x65x6mm, 4300mm/2700mm long for bracing with clamp (5.8 kg. per Mtr.)

M.S.angle 65X65X6, 1600mm @ 5.8Kg/Mt.

stay rod complete

Erection of the following supports including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing.All types of clamps, nut, bolt washers stone pad would be provided by the contractor.

Single support of S.T pole 11 mtr long.

Single support of PCC pole 9 mtr long.

Double pole structure on S.T. Pole 11mtr long complete with bracing.

end type double pole struture on 11mtr.ST pole with bracing

four pole structure on ST pole 11 Mtr. long with bracing

Erection/fixing for stay set with stay wire and clamp as per RESSPO drawing including binding, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 before back filling of the pits as per RESSPO schedule. All clamps, nuts, bolts, cement. brick, ballast, sand etc would be provided by the contractor.

Concreting of supports at the time of irrecion of pole in 1:4:8 ratio from botom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement ,brick ballast and sand in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All matrial would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor from double pole at 220KV substation to tapping point of 33 KV feeder line kuwatanda including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of each S.T Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Earthing of each PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support & its accessories by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Guarding of HT/LT/Telephone Line/ Road/River Crossing etc. by providing G.S Earth wire 7/16 SWG/GI wire No. 8/10 and making net with difference of 1.00 Mtr. Completely including fixing of channel/angle etc. with proper locking at each support. All type nut &bolts, would be given by the contractor.

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

Painting of following support with one coat of red oxide primer and two coats of aluminium white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of work.

Single pole structure of 11 mtr. ST Pole.

Double pole structure of 11 mtr. ST Pole with bracing

four pole structure on ST pole 11 Mtr. long with bracing

Fixing of danger board and G.I barbed wire provding by department on each location including proper clamping. Anti climbing devices provided by the contractor.

Laying of double circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. The two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 33KV XLPE cable)

Cable laying by drill method single circuit through GI Pipe (GI Pipe will be provided by the contractor).

Cable laying by drill method single circuit

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts.

Fixing of 11 KV O/D or I/D / State through

Making of Ms Ledder type of frame of angle (65x65x8mm) power cable with concreting of the same in the fround and proper clamping (50x6mmm) of the same

M/S TIWARI TRADING COMPANY

BHARAT ELECTRICAL TRADERS