Loading…
Loading…
Tender ID
Tender Value
₹20 L
EMD Value
₹20,000
Closing Date
30 Jan 2026, 6:00 pmClosed
EXECUTIVE ENGINEER (O&M)DGVCL,DIVISION, DHARAMPUR
Tender for the work of Supply ,installation ,testing & commissioning earthing system for HT line pole and transformer center with maintenance free,Ready capsules,Pipe in cage (PIC) type earthing and connection to the various parts of transformers center using GI strip and GI nut bolt under jurisdiction area of Bopi Sub Division under Dharampur Division.
267417
DHR/AB/TECH/25-90 Dtd: 20/01/2026
Open
Electrical Works
Works
Valsad
3 documents required · 3 mandatory
₹1,180
DGVCL
₹20,000
20 Jan 2026
20 Jan 2026
20 Jan 2026
30 Jan 2026
20 Jan 2026
-::- SCHEDULE-B -::-
Supply, Installation, Testing and Commissioning of
Maintenance Free, Ready Capsule, Pipe-In-Cage
(Pic) Type, Earth Electrodes for HT Feeder Pole
Having 2000 mm Electrode Length as per the
Tender Specifications and Drawing. (All Materials
Will Be Supplied By Agency)
Supply, Installation, Testing and Commissioning of
Maintenance Free, Ready Capsule, Pipe-In-Cage
(Pic) Type, Earth Electrodes for HT Feeder Pole
Having 3000 mm Electrode Length as per the
Tender Specifications And Drawing. (All Materials
Will Be Supplied By Agency)
Supply and Installation of 25 X 3 mm GI Strip
having hot dip- galvanized-zinc coating of 80-100
microns without any joints or welding. Both the
end of the GI strip should be connected with GI
nut bolts and required fabrication work for giving
separate earthing connections to
3 9926000090 (1) Neutral of the transformer Meter
(2) MS structures of the transformer center
(Approximately 25 meter GI strip per transformer
- as per requirement and instruction of
Engineer in- charge) (All Materials will be
supplied by Agency)
Supply and Installation of uPVC standard make
Pipe of 1.25" diameter for covering GI strip with
UV protected Cable Ties of 550 X 7.6 mm size to
4 9926000092 bind with pole face (Approximately 25-meter Meter
uPVC pipe for GI strip covering per transformer
centre -as per requirement and instruction of
Engineer in-charge.
Total of schedule B….
(+)_______%Above, (-)_______%Below, Rate to Rate…..
Net Total of Schedule B:
Amount in Words: (Twenty lacks only)
1. Whatever Steel Material removed after replacement should be credited to Store.
2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.
3. Contractor has to carry out work under ALL Sub-Division under Dharampur
4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary
accessories to the contractor.
5. The rates are inclusive of dismantling charges of existing bare conductor and
crediting in to store & dismantling of service lines from LT bare conductor and to
provide service connections on ABC by insulated pierce connectors through service
connection box.
6. The contractor has to collect all the required materials from DGVCL store as well as
credit the dismantle material to the DGVCL store at their cost.
1. DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ
Poles,Insulators,Fabricated materials etc. to the contractor.
2. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding
rods confirming to the relevent ISI specification and as directed by Engineer in charge.
3. Necessary electricity connection for fabrictated items shall be provided by DGVCL on
payment of required charge for connection & electricity bill of the same shall be paid by the
4. All the rates are inclusive of PF and Exclusive of GST applicable time to time.
5. All steel material are to be painted as below:
(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles &
steel fabricated materials of RSJ/PSC poles is must required.
(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the
RSJ poles & steel fabricated materials of RSJ/PSC poles.
Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint)
is to be properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.
Executive Engineer (O&M)
Dharampur Division.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Tender notice.pdf
Tech Specification FOR PIC TYPE EARTHING.pdf
Schedule-B.pdf
GENERAL TERMS CONDITION.pdf
Drawing GPRD 16 AND 17.pdf
Document.pdf
bank detail for paymnet.pdf
5.INTIGRITY PACT.pdf
4.FINANCIAL SPECIFICATION AND GENERAL CONDITION.pdf
CORRIGENDUM Schedule-B.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .