Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹82.1 L
EMD Value
₹83,000
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, R & B Division, Godhra
Resurfacing of Kabirpur - Nadisar Road 0/0 to 2/4 (work in ch. 1/8 to 2/4) Ta. Shahera , Dist.Panchmahal
367324
15 OF 2026-27
Open
Civil Works - Roads
Works
Panchmahal
2 documents required · 2 mandatory
₹2,400
EXECUTIVE ENGINEER, R & B DIVISION, GODHRA
₹83,000
19 Nov 2026
19 Nov 2026
19 Nov 2026
7 Dec 2026
19 Nov 2026
90 days
Name of Work :- Resurfacing of Kabirpur Nadisar Road 0/0 to 2/400 (work in
ch. 1/800 to 2/400) Ta. Shahera , Di.Panchmahal
BILL OF QUANTITIES
Memorandum showing item of works to be carried out.
It. Item of Work Qty. Unit Rate in Total
No. Figures Amount
1 Dry Lean Cement Concrete Sub- base (Construction of dry lean cement 413.00 Cum 2167.66
concrete Sub- base over a prepared sub-grade with coarse and fine
aggregate conforming to IS: 383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate
gradation after blending to be as per table 600-1, cement content not to be
less than 150 kg/ cum, optimum moisture content to be determined during
trial length construction, concrete strength not to be less than 10 Mpa at
days, mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing
2 Cement Concrete Pavement (Construction of reinforced, dowel jointed, 688.00 Cum 6387.91
plain cement concrete pavement over a prepared sub base with 43 grade
cement @ 400 kg per cum, coarse and fine aggregate conforming to IS
383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a
batching and mixing plant as per approved mix design, transported to site,
laid with a fixed form or slip form paver, spread, compacted and finished in
a continuous operation including provision of contraction, expansion,
construction and longitudinal joints, joint filler, separation membrane,
sealant primer, joint sealant, debonding strip, dowel bar, tierod, admixtures
as approved, curing compound, finishing to lines and grades as per
3 Providing and laying specified Quarry Spall in side shoulders including 300.00 Cum 483.79
carriage of materials spreading in live and level and consolidation
4 Clearing and grubbing the road side shoulders (both side in 2.0 mtr. 0.22 Hectar 28393.04
width) including uprooting rank, vegetation grass bushes, shrubs, e
sapling and tree girth upto 300mm . Removal of stumps of trees cut
earlier, disposal of unserviceable material, guide the traffic with required
warning sigs by using of labour with safety jacket and equipments etc.
complete as directed by Engineer in charge(c) by mechanical means in
area of light jungle
5 Earthwork for embankment including breaking clods,dressing with all lead 1500.00 Cum 155.89
and lift (excluding watering and consolidation) (D) From Borrow area within
2.0 Km. lead (more than 10 ton)
6 Rolling and watering of earthwork in layers with vibratory roller including 1500.00 Cum 22.48
filling in depressions which occur during the process.
7 Box Cutting the road surface to proper slope and camber for making a base 2100.00 Cum 104.20
for road work including removing the excavated stuff and depositing on the
road side slope as directed upto 50 Mt lead.
It. Item of Work Qty. Unit Rate in Total
No. Figures Amount
8 Providing and laying granular sub base in required layer by providing 600.00 Cum 758.51
coarse graded material grading I using river bed material such as
unscreened gravel (CBR more than 30%) as per table 400-2 of MORT&H
gradation including conveying the materials on site of work and, mixing and
spreading in to grade and camber, watering and consolidation at OMC with
vibratory roller including cost of materials and labour etc. complete
9 Providing and laying wet mix macadam (W.M.M.) in One layers 150mm 750.00 cmt 988.79
using machine crushed black trap aggregate of 40 to 50 mm size in the
material with water OMC in mechanically mix (pug mill) carriage of mix
material by contractor's own tipper to site of work including laying,
spreading and compacting in sub base, base course on well prepared
under base of compacting as per MOST specification to achieve the
desired density (Mechanically laid).
10 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 8600.00 Kg 76.21
bending, binding and placing in position complete upto floor two level.
11 Road marking with hot applied thermo plastic paints with reflectorising 272.00 Sqm 367.72
glass beads on bitumin surface providing and laying a hot applied
thermoplastic compound 2.5mm is including reflectorising glass beads
@250gms/sqm area,thickness of 2.5mm is excluding of surface applied
glass beeds as per IRC-35 2015. The finished surface to be level,uniform
and free from sreaks and holes. zebra patta/bump patta lane/center
line/edge line/cut patta. The white color marking should provide liminance
coefficent on cement road shall be min 130mcd/m2/lux and Asphalt road
shall be min 100 mcd/m2/lux during the service life during the day time. The
marking should meet the performance criteria for night time reflectivity,wet
reflectivity and skid resistnce as mentioned in the section 15 of IRC35-
2015. warrenty for retro reflectivity shall be two years
12 Cat Eye/Road Stud/RPM :- Supplying of Moulded Twin Shanks Raised 208.00 Nos 326.23
Pavement Markers made of polycarbonate and ABS moulded body and
reflective panels with Micro Prismatic Lens (No Glass bead lens) capable of
providing total internal reflection of the light entering the lens face and shall
support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type-H
and complying to specifications of catagory A of MORTH circular No.
RW/NH/33023/10-97-Do III Dt. 11/056/1997. The height, width and length
shall not exceed 20mm, 130mm and 130mm and with minimum reflective
area of 13 Sqcm on each side and the slope to the base shall be 35+/-5
degree. The strength of detachment of the integrated cylinderical shanks
(of diameter not less than 19+/-2 mm and height 30+/-2 mm) from the body
is to be a minimum value of 500 kgs. Fixing will be by drilling holes on the
road for the shanks to go inside, without nails and using epoxy resin based
adhesive as per manufacturer's recommendation and colour of the marker
should be as per the IRC:35-2015 and as directed by Engineer-in-charge.
It. Item of Work Qty. Unit Rate in Total
No. Figures Amount
13 Direction (Junction) Sign :-Providing and fixing sign boards made out of 2.00 Nos 26572.09
2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size
244x122 cms. rectangular as per design of IRC-67-2012. Pre treated with
phospheting process & acid etching; coated with one coat of epoxy primer
and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand post of 75 x 75 x 6mm /
65NB Circular MS Pipe as required and frame fabricated from suitable size
iron angle of 50 x 50 x 5mm; painted with bestquality epoxy coatings in
black and white bends. The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC
blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A warranty for
years for the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report
14 Village name/ Bump Ahed sign :-Providing and fixing sing boards made out 4.00 Nos 6313.51
of 2mm aluminium sheet; size 90 x 60cms. rectangle as as per the design
of IRC-67-1977 pre treated with phospheting process & acid etching;
coated with one coat of epoxy primer and two coats of best quality epoxy
paint; reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m
long (2 nos) stand post and frame fabricated from suitable size iron angle
of 50 x 50 x 5mm painted with best quality epoxy coatings in black and
white bends. the details of symbol or inscription / numerals for each board
shall be as per the instruction of engineer in charge. The fixing at site shall
be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the supervision of engineer in
charge.(A) Engineer Grade(VR)...
15 Cautionary Warning Sign :-Providing and fixing sing boards made out of 8.00 Nos 5077.27
2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per
design of IRC-67-1977. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of best quality
epoxy paint ;reflectorised with retro refiectivesheeting as per latest
M.O.S.T.Specifications; 3.1m long stand postand frame fabricated from
suitable sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required;
painted with bestquality epoxy coatings in black andwhite bends. The
details of symbol foreach board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete under the
supervision of engineer in charge.(A) Engineer Grade(VR)
16 Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm 4.00 Nos 3666.30
aluminium sheet; size 90 x 30cms. rectangle as as per the design/drawing
attached (IRC) pretreated with phospheting process & acid etching;
coated with one coat of epoxy primer and two coats of best quality epoxy
paint; reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from suitable
size iron angle of 35 x 35 x 3mm & 50 x 50 x 5mm painted with best quality
epoxy coatings The fixing at site shall be in 1:2:4 CC block of
size 45x45x 60cms. for each leg. including excavation curing etc. complete
under the supervision of engineer in charge.(A) Engineer Grade(VR)...
It. Item of Work Qty. Unit Rate in Total
No. Figures Amount
17 Chevron Board on curves:- Providing and fixing sing boards made out of 30.00 Nos 3711.75
2mm aluminium sheet/4mmACP (alluminium Composite panel), size 45 x
60 Cms. square as per the design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with one coat of epoxy primer
and two coats of best quality epoxy paint; reflectorised with high inensity
Primetic grade retro refiective sheeting of Type-4 as per ASTM D-4956
and latest M.O.S.T. Specifications; 1.8 mt long stand post of iron angle
75x75x6mm/65NB Circuler MS Pipe as required and frame fabricated from
suitable size iron angle of 35x35x3mm , painted with best quality epoxy
coatings in black and white bends. the details of symbol or instruction /
numerals for each board shall be as per the instruction of engineer in
charge.The fixing at site shall be in 1:2:4 CC block of size45X45X60 cm for
each lag including excavation , curing etc. complete under the supervision
of Engineer in charge. A Warranty for 7 years for the retro reflecting
sheeting from original manufacture & a certified copy of 3 year outdoor
exposer test report from third party test lab for
18 Providing and fixing guard stone as per I.R.C. type design including white 40.00 Nos 349.11
washing etc. complete.(ii) Fixing in C.C. 1:5:10
19 Providing and fixing Hectometer as per I.R.C. type design including 4.00 Nos 356.50
painting, lettering etc. complete.(ii) Fixing in C.C. 1:5:10
Rs. Eighty Two lakhs Eight Thousand Three Hundred Thirty Nine and Sixty Four Paisa Only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for
which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017
Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per
actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate
of input rate mentioned in all the tender.
5. The Contractor will have to submit the mix design for different grades of cement concrete at his own cost before
execution as directed and to be approved from the Engineer in charge.
6. Credit for 70% of Diversion and other dismantalled materials of amount of Rs. 0.0 must be recovered from 1st R.A.
bill of Contractor's.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found
Executive Engineer
R & B Division,
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
STD SPECI.pdf
BOQ.pdf
SBD.pdf
SCH OF TEST.pdf
Special condition.pdf
SPECI.pdf
NIVIDA.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .