Annual Maintenance of ACs installed at Sonar Tari State Guest House Agartala Tripura for 2years

Amount

Complete servicing of AC machines (Indoor & outdoor Unit) as per direction of the Engineer-in-charge.

1.5/2.0 TR High wall split type AC

2.5/3.0 TR High wall Split and cassette AC

Leak testing of condenser & evaporator unit for performance and pressure testing etc and repair with brazing as per direction of the Engineer-in-charge.

1.5/2.0 High wall split type AC

2.5/3.0 TR High wall split and cassette type AC

Charging of fresh refrigerant gas (R-22) for 1.5/2.0/2.5/3.0 TR High wall split, and cassette AC system as per direction of the Engineer-in-charge.

Providing, fitting and fixing of hermetically sealed compressor for replacement of defective one as per direction of the Engineer-in-charge. (With one year warranty)

1.5 TR capacity High wall split type AC.

2.0 TR capacity High wall split type AC

2.5 TR capacity High wall split type AC

3.0 TR capacity High wall split and cassette type AC

Providing, fitting and fixing of hermetically sealed copper condenser unit for replacing old one as per direction of the Engineer-in-charge

1.5 TR capacity High wall split type AC

2.0/2.5 TR capacity High wall split type AC

3.0 TR capacity High wall split and cassette type AC

Fitting, fixing of blower motor of Ac systems after rewinding I/C necessary replacement of bush, shaft etc with complete varnishing as per direction of the Engineer-in-charge.

Repair/ replacement of defective scroll motor of indoor unit split type AC system as per direction of the Engineer-in-charge.

Repair/ replacement of defective swing motor of indoor unit split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective relay of split type AC system as per direction of the Engineer-in-charge.

Replacement of air filter of split type AC system as per direction of the Engineer-in-charge

Repair/replacement of defective indoor PCB circuit as per direction of the Engineer-in-charge.

1.5/2.0/2.5/3.0 TR split type high wall AC

3.0 TR cassette type AC

Repair/ replacement of defective outdoor PCB circuit for cassette type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective PCB transformer for split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective pump motor for cassette type AC system as per direction of the Engineer-in-charge

Supply and installation of additional length of copper pipe of 5/8” diameter and ¼” diameter for suction and liquid line with insulation and necessary wiring (with three pin electrical plug) to connect the indoor and outdoor unit as per direction of the Engineer-in-charge

Supply and installation of additional length of copper pipe of 5/8” diameter and 3/8’ diameter for suction and liquid line with insulation and necessary wiring (with three pin electrical plug) to connect the indoor and outdoor unit as per direction of the Engineer-in-charge

Fabrication of M.S platform for placement of condensing unit by using M.S angel of (50x50x5)mm/(65x65x5)mm size base plate, nuts & bolts/universal bracket (GSS) for ODU of split type AC system including all accessories for on-site installation i/c painting, fitting, fixing grouting by cement mixer as per direction of the Engineer-in-charge

Dismantling and re-installation of 1.0/1.2/1.5/2.0/2.5/3.0 TR split and cassette type AC system as per direction of the Engineer-in-charge

Providing, fitting and fixing of G.C.I shed of two parts slanting with ridge and necessary structure by using M/S angle of (30x30x5) mm size M.S flat (18x5) mm size over condensing unit i/c painting and finishing as per direction of the Engineer-in-charge

Providing hard/ coil PVC pipe of good quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-charge

Repair/ replacement of defective thermostat for split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective 45 mfd capacitor for split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective 50 mfd capacitor for split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective terminal clip as per direction of the Engineer-in-charge

Providing fitting and fixing of PVC tape (Black tap) as per direction of the Engineer-in-charge

Repair/ replacement of defective capillaries/ dryer for split type AC system as per direction of the Engineer-in-charge

Supply and installation of additional length of electrical copper wire 4 mm size with casing size 01 (One) inch including other materials to connect outdoor unit with electrical panel as per direction of the Engineer-in-charge

Repair/ replacement of defective fan capacitor 2.0/2.5/4.0/5.0 mfd as per direction of the Engineer-in-charge

Repair/ replacement of defective fan blade of outdoor unit of split and cassette type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective connector for split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective contactors for split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective remote with battery for split and cassette type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective coil sensor for split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective room sensor for split type AC system as per direction of the Engineer-in-charge

Repair/ replacement of defective nitral tape (Arrow tape) as per direction of the Engineer-in-charge

General checking of split/ cassette type AC system for functioning and repairing without replacement of spare parts

RS COOLING APPLIANCES

R.P.ELECTRONICS