CONSTRUCTION OF URBAN HEALTH CENTER IN PLACE OF EXISTING HEALTH CENTER AT TPS.NO.-04 (ASHWANIKUMAR-NAVAGAM), FP-M/8,PAIKEE IN EAST( VARACHHA) ZONE-A, SURAT.

NAME OF WORK :- CONSTRUCTION OF URBAN HEALTH CENTER IN PLACE OF EXISTING HEALTH CENTER AT TPS.NO.-04 (ASHWANIKUMAR-NAVAGAM),

FP-M/8,PAIKEE IN EAST ( VARACHHA) ZONE-A, SURAT.

SR. SOR RATE- 23-24 & M.R.

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

A - BUILDING WORK

(A) WORK UP TO PLINTH LEVEL

Excavation for foundation including sorting out and stacking off useful materials and disposing

1 of the excavated stuff up to 50 mt. lead and all lift, watering etc.comp. (A) loose or soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 577.00 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the surplus

excavated soil as directed within a lead of 50 M. For following diameter of piles.

250mm dia 18.00 Rmt 326.84

SMC SOR , ITEM NO. 94, PG. NO.

Providing & Filling Rubbles including hand packing & filling interstics with Quarry Spalls

complete for all leads and lifts.

SMC SOR , ITEM NO. 22, PG. NO. 3 80.00 C.M. 1064.80

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand : 6 Crushed stone agg 20m.m Nominal

size) &curing comp. excl. cost of form work in :(a) foundation & Plinth

(A) Foundation 50.00 C.M. 3005.76

(C) Grade Slab 45.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone agg. 20 mm

5 nominal size) & curing comp. Includ. cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation, footing, Base of columns and Mass concrete.

(C) Grade slab 57.00 C.M. 3637.34

(SOR SMC Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine vibrator, curing, testing M25 Design mix

6 concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete 135.00 C.M. 4180.62

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine vibrator, curing, testing M25 Design mix

7 concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12587.74

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt. 0.00 C.M. 11136.62

(3) Having cross sectional area more than 0.12 sq. mt. 28.00 C.M. 9190.79

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt. 5.00 C.M. 8075.85

(3) Having cross sectional area more than 0.12 sq. mt . 34.00 C.M. 6999.09

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m Nominal

size)& curing comp. incl. cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 5.50 C.M. 3982.62

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.---

Upto G.L./P.L. 25343.00 Kg. 76.21

(SOR SMC Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash bricks having crushing strength not less than

35 Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

(SOR SMC Pg No. 2 It No. 16) 59.50 C.M. 4511.97

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

11 layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 1394.00 C.M. 130.39

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

including watering, ramming and consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 325.00 C.M. 289.06

carrying out plinth treatment to post construction/existing structure by spraying chemical

solution for termite control treatment including labour and material consisting with ISI

13 specification using chlordene and chiorpurfiles 20 EC as per 6131_part II concentration weight 463.00 S.M. 82.89

one litter give 1% concentration inclusive of one litter chemicals emulsions application at the

rate of 5 litter chemicals /sqmt of surface is recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

14 Finishing coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and apply roller

horizontal as well as vertical ( two times ) up to good quality and size of grain in elevation as

per directed by engineer incharge.

(SOR SMC Pg No. 3 It No. 28) MR 83.00 S.M 324.00

Providing & applying two coats of weather shield max paint (3 coats may be required in case of

darker colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and manufacturers

Surface Preparation : surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi,algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir

brush, followed by water jetting if required. Fill up all minor cracks and defects with white

cement and sand mixture in the ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the surface thoroughly using wire

Priming: Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No. 16 83.00 S.M 82.00

TOTAL COST UP TO PLINTH

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

(B) WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator, curing, testing M25 Design mix

16 concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12587.74

First Floor 0.00 C.M. 12627.34

Second Floor 0.00 C.M. 12666.94

Terrace Floor 0.00 C.M. 12706.54

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.

Ground Floor 0.00 C.M. 11136.62

First Floor 0.00 C.M.

Second Floor 0.00 C.M. 11215.82

Terrace Floor 0.00 C.M. 11255.42

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 23.00 C.M. 9190.79

First Floor 23.00 C.M. 9230.39

Second Floor 23.00 C.M. 9269.99

Terrace Floor 14.00 C.M. 9309.59

Stair Cabin 4.00 C.M. 9349.19

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 8994.86

First Floor 0.00 C.M. 9034.46

Second Floor 0.00 C.M. 9074.06

Terrace Floor 0.00 C.M. 9113.66

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

Ground Floor 5.00 C.M. 8075.85

First Floor 5.00 C.M. 8115.45

Second Floor 5.00 C.M. 8115.45

Terrace Floor 3.00 C.M. 8155.05

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 25.00 C.M. 6999.09

First Floor 25.00 C.M. 7038.69

Second Floor 25.00 C.M. 7078.29

Terrace Floor 0.00 C.M. 7117.89

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7887.74

First Floor 0.00 C.M. 7927.34

Second Floor 0.00 C.M. 7966.94

Terrace Floor 0.00 C.M. 8006.54

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 14.00 C.M. 7306.10

First Floor 14.00 C.M. 7345.70

Second Floor 14.00 C.M. 7385.30

Terrace Floor 0.00 C.M. 7424.90

(3) Having more than 13 cm. Thickness

Ground Floor 50.00 C.M. 6727.93

First Floor 50.00 C.M. 6767.53

Second Floor 41.00 C.M. 6807.13

Terrace Floor 12.00 C.M. 6846.73

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 2.00 C.M. 9419.25

First Floor 2.00 C.M. 9458.85

Second Floor 2.00 C.M. 9498.45

Terrace Floor 1.00 C.M. 9498.45

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 4.50 C.M. 6913.25

First Floor 4.50 C.M. 6952.85

Second Floor 2.50 C.M. 6992.45

Terrace Floor 1.50 C.M. 7032.05

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m Nominal

size)& curing comp. incl. cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 9.50 C.M. 3982.62

Providing, mixing, placing, compacting by machine vibrator, curing, testing M25 Design mix

18 concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement

(A) Stair cases including landing etc.

Ground Floor 8.00 C.M. 7158.83

First Floor 8.00 C.M. 7198.43

Second Floor 8.00 C.M. 7238.03

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 5.00 C.M. 9030.72

First Floor 5.00 C.M. 9070.32

Second Floor 5.00 C.M. 9109.92

Terrace Floor 5.00 C.M. 9149.52

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.---

Ground Floor 21275.00 Kg 76.21

First Floor 21275.00 Kg 77.21

Second Floor 19680.00 Kg 78.21

Terrace Floor 7090.00 Kg 79.21

Stair Cabin Top 128.00 Kg 80.21

(SOR SMC Pg No. 2 It No. 15)

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 43.00 C.M. 4511.97

First Floor 59.00 C.M. 4786.95

Second Floor 46.00 C.M. 4786.95

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Terrace Floor 36.00 C.M. 5061.92

Stair Cabin Top 13.00 C.M. 5379.24

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks having crushing strength not less than

35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 35.00 S.M. 678.86

Second Floor 320.00 S.M. 685.11

First Floor 345.00 S.M. 691.37

Terrace Floor 0.00 S.M. 697.62

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete walls similar

22 surfaces for plastering & finished even & smooth with a floating coat of cement slurry mixed

with admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3 sand)

(A) for wall and similar surfaces

Ground Floor 630.00 S.M 237.51

First Floor 1174.00 S.M 265.65

Second Floor 1129.00 S.M 293.79

Terrace Floor 236.00 S.M 321.93

LMR Floor 67.00 S.M 350.07

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls similar

surfaces for plastering & finished even & smooth with a floating coat of cement slurry mixed

with admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1 cement :

(B) for ceilings and soffits of stairs

Ground Floor 400.00 S.M 214.60

First Floor 430.00 S.M 242.74

Second Floor 315.00 S.M 270.88

Terrace Floor 80.00 S.M 299.02

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / PVC) at junction

of brick work and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs

or tag by cement mortar 1:3 before applying the plaster, including curing, scaffolding all

complete as directed.

Ground floor 52.00 S.M. 102.00

First floor 81.00 S.M. 102.00

Second Floor 73.00 S.M. 102.00

Terrace Floor 20.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

Providing 20 mm thick double coat mala cement plaster on brick / concrete work for

plastering comprising of base coat 12 mm thick cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing etc. complete.

Ground Floor 0.00 S.M 272.78

First Floor 0.00 S.M 272.78

Second Floor 0.00 S.M 272.78

Terrace Floor 0.00 S.M 272.78

LMR Floor 0.00 S.M 272.78

(SOR SMC Pg No. 3 It No. 27)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

26 Finishing coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and apply roller

horizontal as well as vertical ( two times ) up to good quality and size of grain in elevation as

per directed by engineer incharge.

Ground Floor 295.00 S.M 324.00

First Floor 419.00 S.M 324.00

Second Floor 324.00 S.M 324.00

Terrace Floor 211.00 S.M 324.00

LMR Floor 34.00 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

27 Providing throating or plaster drip and moulding it to R.C.C. chajja etc.comp.. For all floor

Ground Floor 85.00 R.M 41.66

First Floor 40.00 R.M 41.66

Second Floor 40.00 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor

Ground Floor 156.00 R.M 50.00

First Floor 156.00 R.M 50.00

Second Floor 156.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of steps and

29 landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement.

Ground Floor 0.00 S.M 1040.35

First Floor 270.00 S.M 1040.35

Second Floor 260.00 S.M 1040.35

Terrace Floor 42.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of steps and

30 dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

Ground Floor 0.00 S.M 1081.71

First Floor 506.00 S.M 1081.71

Second Floor 568.00 S.M 1081.71

Terrace Floor 6.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,Jhonson, Nitco, Somani, Bell,

Asian or Euro make in flooring,treads of steps & Landing laid on bed of 20 mm (Average) base

of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing flooring and jointed with colour cement

slurry including finished with flush pointing & cleaning the surface etc. comp.Size 24" x 24" For

Ground Floor 0.00 S.M 1397.83

First Floor 30.00 S.M 1397.83

Second Floor 27.00 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

P & l 600 mm. X 600 mm. thick, full body Vitrified Tiles, bearing code "Mist" of "Chips

Collection" Series by "Restile" or bearing code "Crest Being" by "Doneto vitrified Pvt. Ltd.", or as

Approved equal by the Architect, as per desing, with 12 mm. thick proper bedding of C.M. 1:3

and Skirting in average 12 mm. thick bedding in C.M. 1:3, in line, level & slope, as directed,

including filling the joints in matching coloured cement grout as Approved by the Architect,

with proper curing, etc. complete. On floor: Basic rate of Tile: 927.00 Rs. With GST.

Ground Floor 0.00 S.M 1339.00

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

First Floor 0.00 S.M 1339.00

Second Floor 0.00 S.M 1339.00

APPROVED RATE FROM GANDHI SMRUTI BHAVAN

P & l 600 mm. X 600 mm. thick, full body Vitrified Tiles, bearing code "Mist" of "Chips

Collection" Series by "Restile" or bearing code "Crest Being" by "Doneto vitrified Pvt. Ltd.", or as

Approved equal, fixed on wall dado with 4.00 mm. thick Pinnacle Excel high strength polymer

33 based adhesive of premium quality by "Perma" or Approved equal, in perfect line & level as per

details, as per design pattern, including filling the joints in matching coloured cement grout as

Approved by the Architect, with proper curing, etc. complete. On Wall: Basic rate of Tile:927.00

Ground Floor 0.00 S.M 1568.00

First Floor 0.00 S.M 1568.00

Second Floor 0.00 S.M 1568.00

APPROVED RATE FROM GANDHI SMRUTI BHAVAN

Providing and filling Epoxy grout of approved or suggested brand by consultant / Engineer in

34 charge in 4mm to 6mm thick tiles joint including spacer with cleaning of joint by Vacuum or

For All Floor 1000.00 RM 40.00

(SOR SMC Pg No.11 It No. 125)

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

35 laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Ground Floor 274.00 S.M 989.45

First Floor 0.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished Kota stone slab 25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-cement : 3-coarse sand) and jointed with gray

36 cement slury mixed with pigment to match the shade of slab including rubbing and polishing

Ground Floor 9.00 S.M 1076.94

First Floor 0.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone platform 0.6 mt. wide & 0.75 mt.

height, including one end side granite stone (Double Polish) of 1.25 mt. height & front granite

stone patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in

1:3 with finishing smooth with cement slurry as required and Stainless Steel sink of 0.45 mt x

0.45 mt size of approved quality and make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)

Ground Floor 9.35 R.M. 3128.00

First Floor 2.35 R.M. 3128.00

Second Floor R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all floor levels, after completing

38 plumbing work of pans, pipes,traps etc.with cinder or fly ash as directed by Engineer in charge

etc. comp.For all Floors.

All Floor 15.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows &clearstory

windows incl. Indian teak wood frames of finished size 12cm x7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality & two coats of oil painting etc. For all

Floor (A) Fully Panelled

All Floor 0.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP frame size 125x65 mm and 35 mm thick FRP shutter with wood

grain raised panneled design finish shutter having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame is to filed up with injected polyurethane foam

40 done in situ along with embedded wooden pieces for stiffening & also taking hinges & fintures. 26.00 S.M 2019.98

The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S. hinges with fastener sleeve & alluminium

fixtures & fasteningsFor all Floors.

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water proof Ply

Vennered & 1.5 mm th.laminate shall be pasted on both side with adhesives as specified by the

41 manufacturers. The laminate shall be as per approved shade & texture, of make incl. Sal wood 0.00 S.M 3720.00

frames of finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws & Anodized

aluminum fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 130.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded aluminium colour anodized section frame

main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no:8687,

@ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x 31.75 mm x 130 mm (of jindal section

no:8758 @ wt. of 0.659 kg/mt) with sliding shutters of horizontal member size 40 mm x18 mm

x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x

18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc. complete for window.For all Floors.

(A) Same as above but colour anodized 16.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

Providing and fixing window having extruded aluminium POWEDER COATED section

frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section

no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm x 1.50 mm (of jindal

43 section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x 0.00 S.M 1591.87

18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member of size

mm x 18 mm x 1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminium fittings & fixtures

and transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but colour anodized

All Floor 62.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17

Providing and fixing standared extruded ofalluminium section of size 63mm x 38.10mm

44 x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation with 0.00 S.M 2414.00

5 mm thick frosted glass as details etc complete for Ventilation

A) Same as above but Colour anodized 8.00 S.M 2414.00

SMC SOR Alluminium Work ITEM NO.4A,Pg No.17 MR

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing & laying granite slab 18 mm thick in Window-Door seal,Frames Etc laid on 10 mm

thick cement mortar 1:4 (1 Cement: 4 Coarse sand) with necessary adhesive material and

finished with flush pointing in white or colour cement, including rubbing & polishing comp.

(Basic Rate: Rs. 1000.00/S.M.).For all Floors.

For all Floors. 228.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

46 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 1470.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled partition

using medium duty sections of Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt),

Galzing Clip with 5 mm thick clear float glass of approved make including all other necessary

fittings and fixtures. Entire work will have to be made water proof using necessary rubber

sectioned wherever required. Gaps all round the frame to be filled with approved water proof

sealent. Bottom portion of doors both side to be covered with 12mm thick prelaminated

particle board of approved make and quality and as per design.

(A) Same as above but Colour anodized

For all Floors. 71.00 S.M 2400.00

SMC SOR Alluminium Work ITEM NO.7(A),Pg No.17 MR

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with

aluminium section of Hindalco, Jindal , Narmada,Banco or Equivalent approved make having

Poder Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm having weight

kg. / R.M. shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and

middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing

side:0.974 kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick

sheet glass in acid frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or archid

make as approved by Engineer-in-charge including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized

For all Floors. 16.00 S.M 3237.00

SMC SOR Alluminium Work ITEM NO.6(A),Pg No.17 MR

Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc. At all floor

levels with M.S. flats at required spacing & frame around

49 square or round bars with round headed bolts & round headed bolts and nuts or by screws incl.

Priming coat of Red lead paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 3065.00 Kg. 104.20

SMC SOR, PAGE NO 5 IT NO

Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting, Welding &

50 Fixing in position Purlin, Main Chord etc. as per Engineer-in-charge.TATA/ JINDAL / ASIAN

For all Floors 500.00 Kg 126

SMC SOR, PAGE NO 12 IT NO

Painting two coat (excluding priming coat) on new steel and other metal surface with synthetic

51 enemal paint, burshing to give an even shade including cleaning the surface of all dirt, dust and

other foreign matters. (A) For plain grill For all Floor

For all Floors 78.00 S.M 65.31

SMC SOR, colour works,item no.-8,Pg No.15

Applying Priming coat over new steel and other metal surface after over and including

preparing the surface by throughly cleaning oil, grease dirt and other foreign matter and

scoured with brushed fine steel wool, scrapers and sand paper with ready mixed priming paint

brushing red lead.

For all Floors 0.00 S.M 35.00

SMC SOR, colour works,item no.-7,Pg No.15

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with suitable arrangement as per

approval of Engineer-incharge, (for payment purpose only

weight of stainless steel members shall be considered excluding fixing accessories such as nuts,

bolts, fasteners etc.)

SMC SOR, ITEM NO 120,Pg No.11, MR 931.00 Kg. 450.00

(1) The whole work is to be executed through specialized agency with a guarantee of 10 (Ten)

54 years given on a prescribed proforma duly stamped (2) The rate shall include for work at all

floors & conducting water proof test as directed. (M.R.)

B) Providing and laying integral cement based water proofing treatment including preparation

of surface as required for treatment of roofs, balconies, terraces etc. consisting of following

operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound comforming to IS:2645 over the

R.C.C. slab including cleaning the surface before tratment.(b) Laying cement concrete using

broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement :

Coarse sand) admixed with proprietary water proofing compound conforming to IS:2645 ,brick

bats is finally covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special water

proofing compound confirming to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried along the vertical surface of the

parapet & other adjoining wall up to height of about 300 mm in a shape of quarter round vata

Incl. curing etc. Comp. With average thickness of 120 mm and minimum thickness at khurra as

(c) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test. All above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of 120 mm and minimum thickness

at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 410.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound

conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound confirming to

IS:2645 about 25 mm. th' in the floor of the depression & about 18mm th' On the side walls of

the depression up to the floor level, water proofing plaster about 18 mm. th' be continued on

the walls above the floor level for a height of 600 mm. with surface suitable to receive further

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading @0.008

C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption 0.316 Bags /

For all Floors 72.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken

pieces of glased tiles of to be laid over cementr morter 1:3 to plain or slope and to be tempered

55 to bring morter crème out up to surface using white cement including grounding off jnctions

and extending them up to 15 cm along the wall, clearing with water and oxalic acid etc as

SMC SOR, PAGE NO 12 IT NO 131 410.00 S.M 747.29

Apply two coats of putty and two coats of primer of approved brand and manufacture on new

56 wall surface to give an even shade including thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 3236.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 1225.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

57 undecorated wall surface to give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 3236.00 S.M 79.39

(B) for ceilings and soffits

For all Floors 1225.00 S.M 79.39

SMC SOR , coiour works,Pg No.15,item no.-5

Providing & applying two coats of weather shield max paint (3 coats may be required in case

of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and manufacturers.

Surface Preparation : surface is thoroughly clean, dry and free from all loose dirt, chalk,

58 grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir

brush, followed by water jetting if required. Fill up all minor cracks and defects with white

cement and sand mixture in the ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the surface thoroughly using wire

brushes. Priming: Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours. Application of putty is not recommended. Minimum 4-6 hours duration is required

between each coat of weather shield max paint.For all Floors.

For all Floors 1283.00 S.M 82.00

SMC SOR, coiour works,Pg No.16,item no.-17

Providing and applying textured plaster as per design of ICI Dulux or of Asian paint as per

manufacturers specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface, watering, curing

etc. complete and as directed by the architects and manufacturers.

Providing & laying granite slab 18mm thick in flooring, treads of steps and landing laid on bed

of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and

finished with flush pointing in white or colour cement including rubbing and polishing

complete. (Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 110.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting, risers of steps,dedo and pillars laid on

61 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished with flush pointing in

white or colour cement including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR PAGE NO 4,IT NO 40 M.R. 35.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe with hooked

62 ends to RCC slabs curing, layig including painting the exposed portion of loops, all as per

standard design complete.

For all Floors. 40.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle cleats as in

main & cross beams,hip & trussed purlins connected to common raffers & the like. For all Floor

For all Floors. 5.00 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

Providing & fixing in position collapsible steel shutters with vertical channels 20 x10 x 2 mm.

Braced with flat iron diagonals 20 x5mm size with top & bottom rails of T-iron 40x40x6mm.

with 38mm dia. steel pulleys comp. with bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

Ground Floor 19.50 S.M 5865.10

SMC SOR , PAGE NO 5, IT NO

Providing & fixing at all floor levels,both face polished machine cut edge Marble slab for

65 Shelve joined with grey/White cement slurry (1:1) incl. Rubbing & polishing etc. complete.

(M.R.) (Basic Cost Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 9.50 S.M 1050.00

66 Wall Vinyl Sticker 44.00 SQ. FT. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

67 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 44.00 SQ. FT. 38.00

SMC SOR, PAGE NO.13,IT NO 147 (MR)

68 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 44.00 SQ. FT. 22.00

SMC SOR, PAGE NO.13,IT NO 148 (MR)

69 5mm PVC sheet Eco Vinyl (Any size) 44.00 SQ. FT. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

70 Decorative theme base designing & painting with all waterproof materials 0.00 SQ. FT. 63.00

SMC SOR, PAGE NO.13,IT NO 150 (MR)

TOTAL COST OF SUPER STRUCTURE

(C ) WATER SUPPLY & SANITATION

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels, size 500mm x

400 mm incl. 100 mm size "P'or "S" trap for water closet squatting pan joining the trap with the

71 pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar ,HindWare

For all Floors. 0.00 Nos. 3275.00

SMC sor- Sanitary Items, Page no22, It No.

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S

trap with normal closing seat cover L bend ncluding jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278, HindWare sleek

Jaquar- CNS-WHT-751P180SPPZ

For all Floors. 14.00 Nos 3282.00

SMC sor- Sanitary Items,Page no21,It No.

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter chrome plated PVC Hose

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587 ,HindWare F160109

For all Floors. 0.00 Nos 971.00

SMC sor- Sanitary Items, Page no22, It No.

Providing Metropole Flush Valve Dual Flow 40mm

74 Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ ,HindWare F860075 14.00 Nos 3465.00

For all Floors.

SMC sor- Sanitary Items, Page no22, It No.

Providing & fixing Wash Hung basin with single hole for pillar tap , Size- 550 x 400 mm at all

75 floor levels, with C.I. or M.S. Brackets painted white incl. cutting holes & making good the same

etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar SLS- WHT -6801

For all Floors. 14.00 Nos 2656.00

SMC sor- Sanitary Items, Page no21, It No.7

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels, mounted on

76 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws and

washers etc. For all Floor

All Floor 14.00 Nos 833.73

SMC sor Page no7 , It No.72

77 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.: F650003, Jaquar FLR-

For all Floors. 14.00 Nos 1423.00

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels, polished bright etc.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare F280002 BIB COCK, Jaquar

FLR-5047 N BIB COCK

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all floor levels, polished bright

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.: F530004, Jaquar FLR-5041N 14.00 NO 1755.00

SMC sor Sanitary Items,Page no21, It No.

80 Providing flush cock consisting lever, cartridge sleeve & flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 , Parry ware

T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED BODY ALD-081,HindWare F280052 &

CONCEALED STOP COCK F850105

All floor 0.00 NO 2110.00

SMC sor Sanitary Items,Page no21, It No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper connecting pipe

81 450 mm long and nuts, washer and brass flange complete, including cutting and making good

the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.: F440020 F850094, jaquar CON

For all Floors. 14.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm thick in

82 bath room with polished wall flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN 1121N ,HindWare F880007

For all Floors. 14.00 Nos 890.00

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing stainless steel recessed type Soap dish of approved make. Including

providing & fixing screws, washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N,HindWare F880011

For all Floors. 14.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the

84 following nominal diameter of self cleaning design with C.I. scread down or hinged grating

including the cost of cutting and making good the walls.

All floor 25.00 558.36

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type"B") of Prince/

Supreme/ Jain/ Astral/ Tulsi/ Finolex make for soil and waste discharge system at all floor

levels incl. All fixtures like bends, tees,shoe etc. jointed with resin of approved brand &

manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of Prince/ Supreme/

86 Jain/ Astral/ Tulsi/ Finolex make for rain water at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

SMC sor ,Page no 8, It No. 85 M.R.

Providing and fixing in position P.V.C. cowl vent to pipes of prince, suprime, jain Or Eqivalent

make etc. comp (M.R).

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing with cement

88 plaster 20 mm avg thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per instruction

given by Eng. incharge. For

75mm PVC pipe 25.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of

prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or equivalent as

89 approved by angineer-in-charge. Pipe shall be fixed on the wall the help of clamp at every two

meter C/C or shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

SMC sor Page no 8 It No.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex

make for water supply line at all floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

SMC sor Page no8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor level,of approved design to C.I. or S.C.I

pipes including cost of cutting holes and making good the wall etc. comp. (M.R)

SMC sor- Page no8, It No. 90 MR

Providing and fixing G.I. holder "Z" clamps at all floor level,of approved pipes including cost of

cutting holes and making good the wall etc. comp. (M.R)

(B) 75 to 90 mm Dia 8.00 NO 75.00

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing and fixing gun metal check or non return full way wheel valve at floor levels,etc.

SMC sor Page no8,It No.

94 Providing and fixing abonite ball cock of approved quality as directed etc. comp.

SMC sor- Page no 8,It No.

Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in cement mortar in proportion

1:1 of following nominal internal diameters including testing of pipes and joints etc. complete.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Providing and fixing s.w. Gully trap with C.I. gratting brick masonary chamber and water tight

Pre cast R.C.C.cover of 300mm X 300mm size (inside) including plastering smooth inside and

outside 15 mm thick in C.M 1:3 etc. comp.i) square mouth traps (A)300 MM X 300 MM Size - P

type.For all Floors.

SMC sor,Page no 7, It No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm &

mm deep sewer trap chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I.

cover with frame to be not less than 38 kg. On top etc. comp. for single pipe.'.(A) Precast RCC

heavy duty Cover instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 10.00 No. 2904.47

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 222.71

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

98 cement: 2 Sand : 4 Grade stone aggregate 20mm size), Foundation concrete 1: 5: 10 & fixing C.I. 0.00 No. 2932.93

cover with frame to be not less than 38 kg. On top etc. comp. Inside dimension, 455 x 610 mm

&450 mm deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 15.00 No. 2681.76

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no8,It No.76

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight not less than

Kg. etc. complete.

SMC sor- Page no.8, It No. 83 15.00 NO 958.17

100 Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm Length

SMC sor- Page no6 It No. 64 6.00 NO 101.91

Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-2556 (Part-2 ) with

101 C.I. hangers and 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall with C.P.

flange complete including cutting and making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT 13261H ,HindWare BACK

SMC sor- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face polished machine cut edge Marble slab for urinal

102 partition joined with grey/White cement slurry (1:1) incl. Rubbing & polishing etc. complete.

(M.R.)( Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 4.00 S.M 1050.00

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering, vibrating,

curing & mixed with approved water proofing cement

compound or "CEMWET"or"PIDICRETE LW"integral water proofing admixture as water

proofing agent to be mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top, bottom slab & side pardi for

Under ground Tank & Item incl. Necessary excavation & refilling the available earth, 15 cm th'

C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per

design, 10mm.th. water proofing cement plaster in C.M. 1:3 with smooth finishing,watering

etc.Comp.to all inner face & bottom of tank curing etc. comp. incl. Locking arrangement, outlet,

inlet, overflow & wash out pipe arrangement as necessary & C.I. Cover 0.60 x .045 weight not

less then 35kg. etc. com. as per structural drawing excluding Steel & as directed by Engineer-in-

Under Ground water Tank 25000.00 Lit 5.46

SMC sor - Page no6. It No.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson, Nitco, Somani, Bell

make at all floor levels, in flooring, treads of steps & landings laid on a bed of 12 mm. Av.

Th.C.M.1:3 (1cement : 3 sand) finished with flush pointing in white cement etc.com. For all

Under Ground water Tank 14.00 SM 857.42

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, Jhonson, Nitco, Somani, Bell

make at all floor levels in skirting risers of steps & dado on 10 mm. th. C.M.1:3 (1cement :3

sand) including necessary cement paste for fixing and joined with white cement slurry

etc.complete. For all floors

Under Ground water Tank 30.00 SM 887.64

SMC SOR, Page no4, It No.

Providing & fixing IS Mark TMT FE 500D reinforcement for R.C.C. work incl. bending, binding &

placing in position etc. comp. Upto G.L./P.L.

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Upto G.L./P.L. 1200.00 Kg. 76.21

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark water tank of

required capacity each with all necessary fittings & connection etc. complete on terrace.

SMC SOR- Page no 8, It No.

Total cost of Water supply & sanitation

(A) Total amount up to plinth

(A) Total amount up to plinth

(B) Total amount above Plinth

(B) Total amount above Plinth

(C) Total amount of water supply & sanitary

(C) Total amount of water supply & sanitary

(E ) ELECTRICAL WORK

NOTE: For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to 1-2-5 & 1-5-1 & 1-5-2.

Item SOR-2025- Total

Sr. 26 Description of Work/ Item qty unit Rate Amount

No. Sr. No (w/o GST)

PART 01: Internal Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base 185.00 Point 485.81 ₹

frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

1 1-2-1. Cat. III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal / PVC / wooden box covered

with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed.as directed.as per pipe erected with

following type of accessories.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

2 1-1-4 complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with 78.00 Point 674.68 ₹

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

3 1-2-2. Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing

wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling 9.00 Point 871.63 ₹

4 1-2-3. Cat-III. (ZFLR/HFFR)

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling with following type 40.00 Point 257.55 ₹

5 1-2-4. Cat. III (ZFLR/HFFR)

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

6 1-2-5. Cat. III

Providing & erecting Switch board for Computer or electric apparatus consisting of following

modular type accessories mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white front plate,modules erected with

necessary connections as directed

1 no. 6A/16A universal plug-switch combined. 21.00 Each 1133.22 ₹

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

7 1-6-2 (B) Cat. III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed by Engineer In charge.

[A] For One Gang

(4) TV Co-axial Socket outlet

(5) Electronic hum Free steps EME Fan regulator

(7) Blank Plate Single

(8) Computer RJ-45 socket

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

(11) 6 Amps. Bell Push

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete

8 1-2-6. Cat.III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with 125.00 Mtr. 24.24 ₹

adhesive solution & Clamps with following dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking

arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected

on wall / ceiling of following size .

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride

rigid material with ignition free and flame proof confirming BS with necessary end caps

Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and measuring 10.00 Mtr. 277.75 ₹

of following sizes

(1) 75 mm x 50 mm trucking

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

(b) 2 wire 6 sq. mm 25.00 Mtr. 147.46 ₹

(d) 3 wire 4 sq. mm 0.00 Mtr. 142.41 ₹

(e) 3 wire 6 sq. mm 0.00 Mtr. 200.99 ₹

Providing and erecting Mains with ISI marked electrolyte stranded copper conductor, Non PVC

Zero Halogen free fire retardant insulated copper conductor, insulated wire (HRFR) conforms

to IS-694, erected in existing pipe with 1.5sq. mm copper conductor of same specifications for 300.00 Mtr. 51.51 ₹

earth continuity of following size.

[c] 2 wire 1.5 sq.mm

[d] 2 wire 2.5 sq.mm 600.00 Mtr. 71.71 ₹

[f] 2 wire 6.0 sq.mm 2.00 Mtr. 140.39 ₹

[i] 3 wire 1.5 sq.mm 0.00 Mtr. 66.66 ₹

[j] 3 wire 2.5 sq.mm 0.00 Mtr. 102.01 ₹

[k] 3 wire 4.0 sq.mm 0.00 Mtr. 140.39 ₹

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if

(f) One wire 10.00 sq. mm

(g) One wire 16.00 sq. mm 10.00 Mtr. 142.41 ₹

(h) One wire 25.00 sq. mm 0.00 Mtr. 236.34 ₹

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe.

of following size of conductors & nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

16 1-4-7. (2) Two Pair

Supplying & erecting approved make LAN cable of following size in existing pipe as per

direction 900.00 Mtr. 47.47 ₹

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT

standard approved with krone strips 1.00 Each 1747.30 ₹

18 1-4-9. (c) Suitable for 50 pair

Subtotal Part-01 ₹

Part-02: Light Fixtures

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 160V to 270V, Power Factor more than

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

(Fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

19 2-15-1. Cat-III

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

20 2-15-1. CAT III

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser,

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 10.00 Each 112.11 ₹

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder.

(ii) 5 to 8 watts

21 2-15-2. CAT III

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % 1.00 Each 220.18 ₹

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for

spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV

(ii) 11-15 watts, Surge-2 KV, CAT- III 1.00 Each 427.23 ₹

22 2-15-3. (iii) 16-20 watts, Surge-2 K , CAT- III 2.00 Each 589.84 ₹

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to

housing complete.IP20 10.00 Each 1794.77 ₹

23 2-16-4. (vi) 36 watts, 24" x 24", Surge- 2KV, CAT: III

24 2-16-4. (vii) from 45 to 48 watts, 24" x 24", Surge-2 KV 4.00 Each 2091.71 ₹

Subtotal Part-02 ₹

Part-03 LT Switchgear, Distribution Boards & LT Panel

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A. with variable

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

25 3-4-4. ICS=100% of ICU only. Cat III 0.00 Each 20946.39 ₹

Supplying & erecting approved make Four Pole 415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty confirming to IS for 1.00 Each 13353.21 ₹

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet,

dust & vermin proof having hinged door with rubber gasket and necessary busbar supports

with COPPER busbar having current density not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulation tape for phase sequence, three phase &

neutral each suitable for following current capacity with necessary painting mounted on wall or

pedestal frame of required size with necessary connections.

(B) Suitable for 200 Amp. capacity 1.00 Mtr. 5731.75 ₹

27 3-7-2. (C) Suitable for 300 Amp. capacity 0.00 Mtr. 8539.55 ₹

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming

to IS 8828/1996 with ISI Mark

28 3-10-1.(B) Cat.III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

29 3-10-2. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity 1.00 Each 595.90 ₹

(a) 6 to 32 Amp.

30 3-10-5. Cat-III

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket,

company fabricated powder coated sheet steel enclosure erected as directed with connection.

31 3-10-6-A [B] 15 Amp. / 5 Amp. Five pin Universal Socket- CAT III.

Supplying & erecting approved make Electronics Starter and relay for air conditioners in ABS

plastic moulded housing. Company fabricated with bakelite terminal for connection with silver

coating bimetallic contact in switching device for o/p with following features.

(1) Low Voltage Protection below 130 V 1.00 Each 886.78 ₹

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp. (inverse time chara-)

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

32 3-10-6-B (5) With unique feature of 3 minute of time delay

33 3-11-2. Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB 1.00 Each 52.52 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for 1.00 Each 629.23 ₹

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(iii)8 way 1.00 Each 1152.41 ₹

(A) single phase incoming and horizontal single phase outgoing

(a) single door (IP-30) 1.00 Each 867.59 ₹

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

(a) sheet steel single door

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

(a) sheet steel single door

Providing and erecting approved make RCCBs conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed

(i) 25 Amps.DP, Cat-III

(ii) 40Amps. DP, Cat-III 12.00 Each 2235.13 ₹

35 3-12-1. (iii) 63 Amps. DP, Cat-III 1.00 Each 2654.28 ₹

Providing and erecting metallic vitrified danger notice board as per language suggested by 1.00 Each 69.69 ₹

36 3-13-1. engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing and erecting metallic vitrified danger notice board as per language suggested by 1.00 Each 81.81 ₹

37 3-13-2. engineer incharge for HIGH VOLTAGE installation to be erected as per IS.-2551.

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by

38 3-13-3. engineer incharge of standard size as per IS-2551

Providing & erecting High Voltage Danger Notice Board sticker as per language suggested by

39 3-13-4. engineer incharge of standard size-as per IS

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating

proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one coat of red oxide with erection on site as 30.00 Kgs 77.77 ₹

per direction of engineer in charge with necessary grouting, cementing, plastering & finishing

40 3-16-4A. complete.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated

outdoor type double door cubical panel board necessary IP-54 and above protection as per

approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of engineer-in-charge with

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of 0.00 Sq. mt. 16323.62 ₹

hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams)

The panel shall be supplied with following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI

approved factory

41 3-16-9. (i) with 350mm depth

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected on existing panel board with all connection, 1.00 Each 1275.63 ₹

42 9-2-2. wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits

LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on

Volt AC , erected on existing panel board with all connection, wiring etc .with manufacturers

43 9-2-4. calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on

44 9-2-6. existing panel board with necessary connections.

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover,

45 9-2-9. complete erected with necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA

burden erected in existing CRCA box duly secured with insulating materials connected to the 1.00 Each 274.72 ₹

46 9-2-7. meter

Providing and erecting following additional parts for panel mounting MCCBs

(A) Extended operating rotary handle with pad lock with three position trip,off,on suitable for 1.00 Each 873.65 ₹

47 3-4-14. 25A to 250 A panel mounting cat-III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader 0.00 Each 8055.76 ₹

tinned copper & complete erected in existing 16 G.M.S. housing.

48 3-4-2. ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V . having normal current rating 250A. with variable

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, 1.00 Each 20946.39 ₹

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

49 3-4-4. ICS=100% of ICU only

*Add 35% additional for microprocessor type of mccb in place of conventional for item no.3-4-1 to 3-4-12

Subtotal Part-03 ₹

PART 04: Earthing System

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T., OCB/

50 3-14-2. ACB/ Transformer LT panel board, Motors etc. using proper clamp.

51 3-14-4. Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 20.00 Kgs 794.87 ₹

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report must be

submitted by Agency.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 10.00 No. 5760.03 ₹

52 3-14-9 Back filling Compound :1 no. Bag of 25 Kg.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in

normal soil. 1.00 No. 8636.51 ₹

Length of Pipe : 3.00 mtrs

53 3-14-9 Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting Approved make Earth fault Relay suitable to mount with inter

connection suitable to following size of moulded case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V AC. with all internal connections & complete 1.00 No. 5415.62 ₹

erected in existing M.S.housing..

Subtotal Part-04 ₹

PART 05: LT Cables & Cable Termination

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

55 4-3-4. (B) 4 core 6 Sq. Mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

following size of cables.

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 5.00 Mtr. 183.82 ₹

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

following size of cables

57 4-3-5. (A) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cable.

58 4-4-2. (A) 3 core 2.5Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

59 4-4-4. (C) 4 core 6 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault 100.00 Mtr. 55.55 ₹

60 4-5-1. all over the run and back filling the same and making the surface as normal ground.

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road

crossing or on floor with necessary material in an approved manner and making the ground as

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road surface 70.00 Mtr. 62.62 ₹

for enclosing cable

(A)50 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of ₹

(C) 2 to 4 core 10 Sq. mm 4.00 Each 38.38 ₹

(D) 2 to 4 core 16 Sq. mm 4.00 Each 47.47 ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Providing and, fixing heavy duty flange type brass double compression type cable gland with

rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc ₹

for following size of cables.

66 6-6-3. Supplying and erecting nuwood 12 mm thick on existing angle iron frame. 2.00 Sq. mt. 291.89 ₹

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible

copper cable approved make of following Size. 100.00 Mtr. 104.03 ₹

(B) 3 Core x 2.5 Sq. mm.

Supplying rubber matting of following thickness as per IS:15652/IEC

Subtotal Part-05 ₹

PART 06: Fan & Related Accessories

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having

3blades with aluminium blades with , canopy & 30 cms. down rod erected with earthing.(Make

69 5-1-6. shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected 78.00 Mtr. 108.07 ₹

70 5-2-1. duly painted for fan complete with proper insulation without leckage and earthing.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium

duty ring mounted low noise operation suitable for medium duty having following dia size and

maximum speed in RPM

[B] 380 mm dia 900 RPM, Cat II

71 5-3-4. [D] 450 mm dia and 900 RPM. Cat.II 8.00 Each 3339.06 ₹

72 5-3-6. Providing suitable M.S. louver shutter of the Exhaust fan. 16.00 Each 368.65 ₹

Supplying and erecting approved make double ball bearing oscillating type Heavy duty bracket

fan with Aluminium Blades A.C. 23OV. 50cy/s wall mounted with height adjustment and rotary 2.00 Each 6438.75 ₹

tilting device complete with guard, wall bracket,mounting accessories as directed.

Subtotal Part-06 ₹

PART 07: Motor & Starters

Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A. range,

directly operated thermal overload relay in sheet steel enclosure for 3phase 415V.50 c/s. A.C. 1.00 Each 2046.26 ₹

motor up to 7.5 H.P.complete erected on P.W. Block with necessary connection.

74 9-1-3. Cat-lll

Providing & erecting open well horizontal mono block pump set with cast iron body, complete

for three phase submersible motor having 0.00 Each 18746.61 ₹

[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to

LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe cat III

[B] For 2 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM @

25 mtr head suitable for 50 mm dia delivery pipe. 1.00 Each 10734.28 ₹

75 9-4-2. CAT II

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing

as per instruction of Engineer in charge on site complete with wiring connection with existing

76 9-5-1. wires , with copper conductor from pump to upper and lower tank.

Supplying & erecting approved make motor control cubical panel (Direct - on - line) made

from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors and

locking, arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main fuses,

single phasing preventer, indicating lamps for R- Y - B phases, overload relay, Automatic water

level controller, Ammeter, Voltmeter each with two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay, start - stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The isolator, overload relay & contactors will be of

L & T, Siemens or BCH make only.

77 9-5-2. (a) DOL up to 5.0 H.P.

Subtotal Part-07 ₹

Part-08: Cable Trays

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as per required and as per IS 2062/1079 and shall

be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with 0.00 R.mt. 305.02 ₹

coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with

necessary support( included) as per Specification and as per instruction of engineer in charge..

(1) 50 X 50 X 1.6 mm Thick

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from

sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate 0.00 Ea. 146.45 ₹

and GI hardware like nut - bolt and washers etc. erected on existing support as per

Specification and as per instruction of engineer in charge of following size

(1) 50 X 50 X 1.6 mm Thick '

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from

sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erected on existing support as per Specification and as per instruction of

engineer in charge..

(1) 50 X 50 X 1.6 mm Thick 90° Elbow

Subtotal Part-08 ₹

PART 09: Water Coolers & Purifire

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚C

within a hour, The water cooler should be comprising of hermetically sealed compressor, fan

motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet connection. The body of water cooler will be made

81 8-13-2 from Stainless Steel.

Supplying and erecting water filter cum purifier with ultra violate technology. (Aquaguard /

82 8-13-5 waterdoc model or equivalent symphony/ crystal/videocon model)

Subtotal Part-09 ₹

PART 10: Liasioning Work:

Charges for doing liasioning work for obtaining the necessary clearances from the Electrical

inspector / competent Authorities for the total Electrical installation, Elevator Inspection,co-

ordinating with various agencies. All necessary Working drawings, calculations, load

calculaiton, test certificates, etc. as required by these authorities shall be prepared and

furnished by the EPC Vendor. Any modification/rectification as required by these authorities

shall be carried out by the EPC Vendor at free of cost. The fees required to be paid to these

83 MR authorities for inspection shall be borne by Owner on production of documentary evidences.

Subtotal Part-10 ₹

PART 11: Lift Work:

(a) General Features & Special Features of the all lift items shall be taken as below.

(b) for Handicap Lifts, Minimum 10 Passengers Lift Capacity shall be considered.same is to be

informed to architect /civil authority to keep necessary size of lift well.

(c) The lifts of 15/ 16 and above passenger capacity shall be taken for Hospital Lifts; Where in

Description “ Stretcher Lifts” shall be mentioned.

(d) The Rates of the following items are for the lift of Machine room less. For Machine room

Lifts, rate for Rs. 1,50,000/- shall be deducted in Total Cost for the Lifts from 4 to 13 Passenger

Lift. Rs. 2,00,000/- shall be deducted in Total Cost for the Lifts 15 and above passenger capacity

(e) Add Rs. 80,000/- for the DUPLEX control for the lifts up to 10 floors and add Rs. 10,000/- for

additional each floor above 10 floors.

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C.

Permanent Magnet Synchronous motor of proper rating with high efficiency shall be used.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in control

[14] Mechanical over speed governor with governor calibration as per actual site parameters

and submission of calibration certificate submission, door key holes in the floor doors, fireman

switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit

should be provided by the lift agency, along with the other steel structure works, foundations

for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required

as / if directed by engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage

Under Voltage protection and THD eliminator in circuit for lift machine room and lift well with

proper numbers of light points, with fixtures, exhaust fan and plug points shall be provided by

the agency. Only 3 phase Power Supply shall be made available by department in lift machine

room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble

fixing around all landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for

obtaining all necessary permission from lift inspector and other authorities. [20] acrylic

transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor. 4.carrying out

third party lift inspection during/after lift erection and provide report by third party

authorized by concern licensing authority 5.agency has to provide third party insurance upto

completion of free maintenance period and submit the document for the same.

[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow

type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of

304 should be provided at appropriate height on the Rear & Side Wall Panels in Lift Car. [23]

With Necessary KVA rating voltage controlled Stabilizer suitable for your controller, drive and

all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is

sugested by CEICED Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial

Communication mode including Regenerative power efficient operation,on site programming

facility, Anti nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring

system having necessary connectivity for remote monitoring & other suitable supporting

hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and hall

lantern & TFT Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car

and all Doors, All landing doors must have fire rating up to 2 hours and car door must have

multi-level crisscross beam door protection.

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each

elevator are equipped with remote monitoring system.agency has to provide mobile app and

user id and password for monitoring

DESCRIPTION OF LIFT :

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following

13 Passengers,. Ground plus 2 upper floors with Rated Speed of 1.0 m/sec.,

84 13-1-AE. (B) With General Specification attached herewith. Cat.III

Supplying & erecting approved make Lift Announcing solid state system in the Passenger/

Stretcher lifts having AC2/ACVV/ACVF drives & automatic doors only. The system comprising

following features & facilities.

(i) Announcing floor message, message to close period.(ii) Announcing ‘Emergency Message’

when lift is stuck between floors due to power failure or any other reason. 1.00 Nos. 17119.50 ₹

(iii) Instrumental Music between floor announcing.(iv) Announcement in English / Hindi &

Gujarati Languages..

(v) Flexible to accommodate special per-programmed message such as name of the building

85 13-2-1. /office.(vi)Volume adjustment control

Providing & erecting approved make overload non-start feature & overload warning Indicator

system in the lift with making use of sound isolated floating platform & micro switches on SI

frame to get sensation of live load inside lift cage at any given moment, with provides new

fixtures of overload warning inside lift cage with new relay in the existing control panel to

activate ‘Overload Non-Start Function with carrying out additional wiring including laying of

new travelling cable, include minor civil work & without changing the existing capacity speed

86 13-2-2. stops, travel & operation of the desired lift

Subtotal Part-11 ₹

PART 12: Air Conditioner

Providing and erecting approved make split air-conditioning unit consisting of copper

condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc.

duly connected separately erected evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost

includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote

Control) with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

87 8-3-1. (c) for 2 ton capacity

88 8-3-1. [a] For 1 Ton Capacity 1.00 Nos. 30713.09 ₹

Subtotal Part-12 ₹

PART 13: Generating Sets

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS:

4722:1968 & BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply

comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing

suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in

24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor,

heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge,

end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder

head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric

starting equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter,

necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer

(With DEF System) and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor

mounted fuel with level indicator and piping and drip proof alternator, self excited, self

regulated, screen protected, with excitation system, capable of delivering the rated system

output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the

engine and alternator fitted on a common fabricated steel base plate with antivibration

mounting engine and alternator both connected to each other by flexible flange coupling and

with floor/wall mounted control panel box comprising of voltmeter ammeter, selector

switches, ACB / MCCB / MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected

with provided suitable capacity armoured cable and complete with Acoustic enclosure (canopy)

made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm

thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded

rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level

not more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should have in built fuel

tank capacity of minimum 8 hrs of continous running capacity on full load . Erection,

commissioning and satisfactory testing as per requirement with first filling of fuel (minimum

up to the 80% of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system

for Two years. & with obtaining all necessary certificate from Electrical Inspector. The Capacity

and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms Engine With - Turbo

Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel

Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness connected to

89 10-4-2. (H) Continuous Rating of 50 KVA, BHP not less than 65.8 BHP 1.00 Nos. 654382.03 ₹

Providing & erecting approved make AMF control panel suitable for following size of 3 phase,

415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator)

Overload relay for generator contactor Neutral contactor for mains and generator Power socket

for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter

items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual

operation. Auto/manual switch. Emergency stop push buttons. Manual start push button.

frequency meter. Engine hour meter. Two earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High

cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

90 10-4-3. (A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set 1.00 Nos. 97320.57 ₹

Subtotal Part-13 ₹

PART 14: ELV SYSTEM

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal

slots. Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling

GSM, E&M line, PRI / EI & VOIP program me through Analog telephone digital key from

Ethernet, public address cord, shall have unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit

dialing of any two external number, Once only ring device, Chairman / Secretary - Do not

disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call

91 7-1-2. Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide 1.00 Nos. 45398.49 ₹

System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External

Music Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External

Music Input, Fax Homing, Global Directory Printing with following capacities [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

[A] No of Extension 16, No of Junctions 6, 8 Port IP Resource in-built, 4 Port Web base

Video Conferencing, No of expandable ports : 48, Operators Console - 01 Compatible :

Providing and erecting Standard Push button telephone (DTMF) Phones [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying & erecting push button type telephone instrument having speaker phone Caller ID &

93 7-1-7. hands free dialing system & 30 memories with display system Single line [[Approved by 1.00 Nos. 565.60 ₹

Competent Authority i.e. not Below the rank of Executive Engineer ]

Subtotal Part-14 ₹

PART 15: External Electrical Works

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 6 mtr. Long duly painted

with two coats of aluminium paint complete with metallic base- plate of 300 mm x 300 mm x

4mm thick for using as a compound light pole with approx. weight 47 Kg.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for

the pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or

45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved 7.00 Nos. 809.01 ₹

95 6-3-4. ( for 4 & 6 mtr pole)

Supplying and erecting Street light pole bracket comprising main B Class MS pipe of

cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size of pole top having nuts and bolts for

fixing the brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical plane and

suitable welded stiffener reducer and nipple with check nut complete painted with one coat.of

Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of

[A] Single Arm bracket 0.5 Mtr 4.00 Nos. 450.46 ₹

[B] Double Arm Bracket 0.5 Mtr 3.00 Nos. 569.64 ₹

96 6-5-4(a). [C] Three Arm Bracket 0.5 Mtr 0.00 Nos. 680.74 ₹

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with bakelite connector strip 5way (3P+N+E) & hinged doors

having locking arrangements with mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following size of box.

(b) 250mm x 200mm x 100mm [deep]

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 10.00 Nos. 3345.12 ₹

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

98 2-16-2 (i) above 36 watts to 48 watts Cat-III

(B) Flood Light (IP-65), Surge -4KV

99 2-17-2. (iv) above 90 to 120 watts Cat-III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

following size of cables

100 4-3-4. (b) 4 core 6 Sq. mm

Supplying & erecting Flexible PVC insulated multistrand multicore 1.1 KV grade ISI marked

Copper Wires of following Size to be erected as directed. 60.00 Mtr. 77.77

101 1-4-5. h) 2.5 Sq.mm 3 core round PVC sheathed

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault

all over the run and back filling the same and making the surface as normal ground. 140.00 Mtr. 55.55

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all over the run and back filling the same and 0.00 Mtr. 74.74

103 4-5-2. making the surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth for laying of cable. below ground / road surface for enclosing cable 140.00 Mtr. 62.62

and back filling the same to make ground as per original.

104 4-5-8. (A) Outer dia. 50 mm

Cable Termination

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of 14.00 Mtr. 38.38

105 4-6-1. (B) 2 to 4 core 6 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Providing & Erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron

pipe with coupling and buch buried in specially prepared earth pit complete with necessary

SWG earth wire with using salt and charcoal / coke as required for pipe type earthing.

Miniature circuit breaker single pole 0.5 A to 2A suitable to operate on 240 V A.C. system and

having overload and short circuit tripping elements and breaking capacity 10 KA to be erected

in existing M.S. box confirming to IS 8828/1996 with ISI mark. (For each Fitting) Cat.III

Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm long duly welded

on 20 cm x 20 cm x 3 mm thick M.S. base plate, erected on wall or corner for mounting street

light luminaire with necessary hardware materials duly painted.

Subtotal Part-15 ₹

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

TOTAL OF ELECTRICAL WORK ₹

B - INTERIOR WORK

WOODEN PARTITION 2.37 Sq. Mt 3669.58

Providing and fixing of full height solid sandwitch partitions (AS PER DRAWINGS) using 50 x

mm aluminium pipe for framing (minimum grid size of 600 mmx 600mm ), 12mm ply (both

sides)of brand greenply ecotech mr,century sainik mr,srg etc, teak wood beading patti etc.

making of rebates and including all hardware items, groove (if shown)50 MM TK , 24 kg density

insulation if required,with all materials,hardwares,ss or powdercoated screws, labour, lead and

wastage,scaffolding etc. complete. And Finished with different materials,and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

ABOVE CEILING PARTITION 18.71 Sq. Mt 1503.83

Providing and fixing of above ceiling partitions (AS PER DRAWINGS) using 75 mm x 50 mm x

2 mm aluminium pipe for framing,with ghana wood infill etc. including all hardware item, with

all material, labour, lead,scaffolding and wastage etc. and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

GLASS PARTITION WITH FILMWORK 1.00 Sq. Mt 4756.14

Providing and fixing of full height glass partitions (AS PER DRAWINGS) using patch fitting / U-

3 channels, 12mm clear toughned glass,film work as per drawing including all hardware

items,silicon,etc with all material, labour,cutouts,edge polish , lead and wastage etc. and

complete the work satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

MIRROR FINISH(5mm thick Looking Mirror) 27.27 Sq. Mt 2565.97

Providing and fitting of mirror/glass (as per drawing & approved shade)of brand

4 ais,modiguard,etc on ply panelling / on tile cladding including all material, labour and

hardware, cutouts, edge polishes,waste of materials and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

WOODEN PANELLING 69.88 Sq. Mt 1748.14

Providing and making of ply panelling on Wall & columns using 12mm ply, aluminium pipe for

(2" x 1") framing(minimum grid size of 600 mmx 600mm ), Ghana bidding patti (11/2" x

5 3/4")including all material, labour and hardware complete,including scaffolding as per

instruction of architect. And Finished with different materials,polish work as per

instructions,and complete the work satisfactorily as per instruction of architect or Engineer-in

Approved Rate of TP10, FP 219, Health Centre, Pal

LAMINATE FINISH 103.06 Sq. Mt 1190.98

Providing and fitting of 1 mm laminate (as per drawing & selection) of brand

greenlam,merinolam,century etc on ply partition with 25 mm x 20 mm teakwood beading patti

6 design on top as per drawing,and 3mm x 3mm grooves if shown, all material, adhesives,polish

work,labour and hardware, waste of materials,polish work as per instructions, complete as per

instruction of architect.[Basic Rate of Laminate : 2000rs./sheet (8' x 4')] and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

ACOUSTICAL PANEL FINISH 34.44 Sq. Mt 4407.47

Providing and fitting of acoustic panels with Standard size & thickness of 1220*2420*9mm.of

brand Artois,smart pannel,senses akustik,trnaquil ,only.IN GRADIENT PATTERN,including

synth pf of 24kg density,Panels should have Sound Absorption coefficient (NRC) 0.84.

Formaldehyde emission standards of GB18580-2001 class E1, it should be a green material

with asbestos-free, non-toxic and tasteless gas under extreme temperature, protecting the

ozone layer, non-irritant and recyclable. acoustic panels have to be Fire-resistant as per China

standard class B1. Good insulation properties, to prevent transmitting the heat from outdoor to

indoor directly as partition or and ceiling, saving 35% of energy, extending the life of air

conditioning.including all acceessories, material,cutting work of approved

finishing,adhesives,paint work , labour etc. and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.(Basic rate of PANNEL-160 rs/sq.ft.)

Approved Rate of TP10, FP 219, Health Centre, Pal

GYPSUM CEILING 98.80 Sq. Mt 958.58

Supplying and Fixing of Suspended ceiling system components which includes Single Layer

Boarding with 12.5mm thick USG Boral Standard Plasterboard This includes of USG Boral

Thundersteel Perimeter Channel (0.50mm thick having one flange of 20mm and another flange

of 30mm and a web of 28mm) screw fixed to brick wall/partition with the help of approved

screws at 600mm centers. Then suspending of USG Boral Thundersteel Intermediate channel

(45mm x 0.90mm thick with two flanges of 15mm each) from the soffit at 1220mm centers with

of USG Boral Thundersteel Ceiling Angle (25x10mmx0.50mm thick) fixed to RCC Slab with of

USG Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia 40mm long Anchor Fastener @

600mm Centers, respectively. USG Boral Thundersteel Ceiling Section (having web of 51 mm

and two flanges of 27mm each) are then fixed to the of USG Boral Thundersteel Intermediate

8 channel with the help of connecting clip (2.6mm Dia) and in perpendicular direction to the USG

Boral Thundersteel intermediate channel at 457mm centers. USG Boral Thundersteel profiles

are rolled with AZ Steel (150 GSM & 310 MPa Yield Strength) having base metal conforming to

IS 513:2016 as per IS 15961:2017/ AS 1397:2001).12.5mm thick USG Boral Standard

Plasterboards (confirming to IS 2095 Part 1) is screw fixed with 25mm long Drywall screws at

230 mm centers. The screw fixing of gypsum boards to the metal framing at the periphery,

openings and cut edges should be at 150mm centers.All the Gypsum boards must be staggered.

All joints to be taped & finished with USGBORAL Paper tape & All-Purpose Joint Compound

confirming to ASTM C475. Material certificate to be provided by company. and approved

surface design in suspended grid with all material, making of coves for indirect lighting

,grooves,cutting and labour,scaffolding, and as per instruction of engineer and as per detailed

drawing & image as directed by the Architect and as approved by the Engineer in Charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

WOODEN CEILING 27.52 Sq. Mt 2818.42

Providing and fixing of wooden ceiling using 12 mm ply of brand greenply ecotech mr,century

sainik mr,srg etc, , aluminium channel & pipe(50 x 25 mm) for framing and suspension, screws

9 etc. including all vertical support and all vertical surfaces from ceiling,necessary

hardwares,75mm anchor fastners and complete with all material, making of coves and cutouts

for ac grills ,labour & scaffolding with all lead, lift and transport. and finished and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

CEMENT SHEET CEILING 59.60 Sq. Mt 2853.80

Providing and fixing of cement ceiling using 10 mm cement sheet of brand T.P.I,SHERA (single

sides), etc. using aluminium framing of 25mm x 50mm x 1 mm in 600 x 600 mm grid,and same

pipe for vertical framing, including all hardware item, aluminium L clits, 25 mm powder coated

self drilling screws,groove (if shown) with all material, 75 mm anchor fastners,making of coves

for indirect lighting, grooves,cutting ,labour,SCAFFOLDING, lead and wastage etc. complete. And

Finished with satin finish wall color and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

SOLID DOORS FOR WOODEN PARTITION(75 MM TK) 4.30 Sq. Mt 5249.88

Providing and fixing of 75 mm solid doors (AS PER DRAWINGS) using 50 x 50 mm aluminium

pipe for framing, 12mm ply (both sides)of brand greenply ecotech mr,century sainik mr,srg etc,

including glass slit as per drawing 50 mm teak wood beading patti at the framing etc. making of

11 rebates and including all hardware items,mortise door lock (ENOX EMH-SS-019)with entire set

including cylinder,heavy duty conceal door closer of brand enox (ENOX ITS-3870-EN 2-

5),ozone,dorma,and groove (if shown) with all materials, labour, lead and wastage,polish work

as per instructions etc. complete. And Finished with different materials,and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

CARPET FLOORING(LOOP PILE) 77.54 Sq. Mt 1883.10

Providing and fixing of approved quality Carpet tile of brand Toli Yutaka,including all

acceessories, material, labour etc. complete. (Basic rate of Carpet- 150 rs/sq.ft.)Surface should

be BCF Nylon 6.6 with Stain Release. Base fabric should be nonwoven polyester with glass fibre

and pvc backing. Size of tile should be 500mm x 500 mm x 6mm with a pile height of 3 mm. Area

12 of use shall be heavy commercial. CRI Green Label Plus Certification is GLP9978. Performance

specifications include smoke density of less than 450 (ASTM E662), Electrostatic Propensity of

1.1kv (AATCC 134), Surface Flammability passes CPSC FF 1-70 (ASTM D2859), Dimensional

Stability as per ASTM D 7570 and delamination strength exceeds backing strength.(Basic rate of

CARPET-155 rs/sq.ft.)installation , adhesives,primer work,etc, as per instruction of Architect or

Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

WALL COLOR - SATIN 10.00 Sq. Mt 282.80

Providing and applying satin paint of approved quality, company and shade upto finishing (min

13 3 coats) including lappi and primer work and all material, labour including scaffolding etc. and

complete the work satisfactorily as per instruction of architect or Engineer-in charge. (Basic

rate of Luster paint- 24 rs/sq.ft.)

Approved Rate of TP10, FP 219, Health Centre, Pal

PLASTIC PAINT 158.40 Sq. Mt 178.06

Providing and applying plastic paint of approved quality, company and shade upto finishing

14 (min 3 coats) including all material, labour including scaffolding etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in charge. (Basic rate of plastic paint-

Approved Rate of TP10, FP 219, Health Centre, Pal

S.S 304 GRADE DUSTBIN 6.00 No. 1656.40

Providing & Supplying of S.S 304 GRADE . Dustbin of brand SATYAKI,pigeon etc,having size of

10 In. Diameter & 14" Height etc. complete as per selection & directed by the Architect and

approved by the Engineer in Charge.(BASIC RATE OF DUSTBIN IS RS 1550/- )

Approved Rate of TP10, FP 219, Health Centre, Pal

POP PUNNING 10.00 Sq. Mt 273.31

Providing and fixing of POP Punning and finished by company approved gypsum, taping, lapi,

16 including scaffolding etc. and including grooves as shown in drawing And including satin paint

complete with all material, labour with all lead, lift and transport.and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

MEETING ROOM TABLE (9.5X 1.8) 1.00 No. 441361.85

Providing and fixing of MINI -CONFERENCE ROOM table including side storage as per drawings

and instructions provided, using ply of brand greenply ecotech mr, century sainik mr, srg etc.,

aluminium pipe for framing and finishing it with 12 or 6 MM CORIAN work including all cnc

work of brand granium,Tranquil,dupont ,and 1mm unicore laminate and 1mm laminate of

17 brand greenlam or selected by the architect (basic rate of unicore laminate is 3000 per sheet

and other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0) including all material,

installation,m.s fabrication work with powder coating, glass work as per design,labour and

hardware, waste of materials,polish work as per instructions etc. and complete the work

satisfactorily as per instruction of Architect or Engineer-in charge. (APPROX RUNNING LENGTH

OF TABLE IS UP TO 9.53 MT.)

Approved Rate of TP10, FP 219, Health Centre, Pal

LOGO 3.25 Sq. Mt 16605.41

Providing and fixing of 10 mm clear Acrylic cut work and fixing 3mm acrylic on top of brand

18 Ptglass,astari etc,3M vinyl with 5 years warranty on fading with all laser and cnc work,including

all material, labour,25 mm ss studs for mounting and other hardwares, waste of materials etc

and complete the work satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

ROLLER CURTAIN 28.80 Sq. Mt 2507.05

Providing and fixing of approved quality roller blinds using phifer fabric of premium grade,

with roller tube, bottom bar leveller made of extruded aluminium alloy an Idler, Insert Type-

Brackets, PVC chain etc. all complete at all floor and heights as per approved specification.

Roller Tube Control, Clutch, Idler Side by side or single Roller Tube of extruded Aluminium

38mm inner dia - 41mm outer dia minimum wall thickness of 1.6mm.

Roller blind - roller blind fabric should be made up of 35% FibreGlass, 65% PVC, it should have

specific low emissivity treatment and lead free with Greenguard gold certification. It should

have 3% to 5% openness, fabric thickness should be 0.43 mm, mesh weight approx 400 gms/

sqmtr. It should cut UV rays, with antimicrobial properties preferably with Microban. The fabirc

should be Flame retardant and Lead Free. It should be GreenGuard certified with Gold Standard

for low chemical emissions for indoor use. (Basic rate of Roller blinds- 85 rs/sq.ft.)including all

accessories, material, labour,installation etc..and complete the work satisfactorily as per

instruction of architect or Engineer-in charge..

Approved Rate of TP10, FP 219, Health Centre, Pal

WOODEN BLINDS 8.00 Sq. Mt 6267.62

Providing and fixing of approved quality wooden vanishing blinds 50 mm wide slit of brand

20 signature -essential series, with easy lift cord/chain operation, including all acceessories,

material, labour,installation etc.. (Basic rate of wooden blinds- 350 rs/sq.ft.)and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

HOSPITAL CURTAIN 69.23 Sq. Mt 1919.00

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing and fixing of approved quality Privacy Curtain - Machine Washable, Anti-Bacterial,

Inherently Flame Retardant.The fabric used for these Professional Cubicle Curtains are 100%

21 polyester an is AUTHENTICALLY flame-retardant that complies with NFPA 701 fire code, to be

installed on existing track's with Mesh top and Grommets with track,channels ,hook and hanger

including all acceessories, material, labour,installation etc. and complete the work satisfactorily

as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

STORAGE UNIT WITH LAMINATE FINISH 57.44 Sq. Mt 12682.38

Providing and Making of Storages (AS PER DRAWINGS) using ply of brand of brand greenply

ecotech mr,century sainik mr,srg etc,(thickness as specified)/ sag wood and finished by 1 mm

Laminate outside as per selection of brand greenlam,merinolam,formica or 6mm HDF as per

22 drawing, 1mm tk laminate (inside),water pu polish (as shown), drawers, shelves etc. with all

hardware, nylon leveler foot rubber, handles,hinges, locks , magnet and other acessories with

all material, installation,labour, lead and wastage,polish work as per instructions etc. and

complete the work satisfactorily as per instruction of architect or Engineer-in charge.(Basic rate

of Inside Laminate : 18 rs./sq.ft. & Outside Laminate : 53 rs./sq.ft.)

Approved Rate of TP10, FP 219, Health Centre, Pal

BED WITH BELOW STORAGE (2.10X0.90X0.90) 13.23 Sq. Mt 31748.64

Providing and Making of BED WITH BELOW STORAGE AND 4" THICK MATTRESS (AS PER

DRAWINGS) using ply of brand of brand greenply ecotech mr,century sainik mr,srg

etc,(thickness as specified)/ sag wood and finished by 1 mm Laminate outside as per selection

of brand greenlam,merinolam,formica or 6mm HDF as per drawing, 1mm tk laminate

(inside),water pu polish (as shown),miniumn 4 to 5 drawers, shelves and shutter with exterior

laminate etc. with all hardware, nylon leveler foot rubber, handles,hinges, locks , magnet and

other acessories with all material, installation,labour, lead and wastage,polish work as per

instructions etc. and complete the work satisfactorily as per instruction of architect or Engineer-

in charge.(Basic rate of Inside Laminate : 18 rs./sq.ft. & Outside Laminate : 53 rs./sq.ft.)

Approved Rate of TP10, FP 219, Health Centre, Pal

GANG CHAIR - 2 SEATER 4.00 No. 12625.00

Providing and fixing 2-seater gang sitter with moulded foam, with Aluminium casting and metal

waterfall seats, PU 10mm thick pads on seat & back (chargeable), P.C. frame & with perforation.

as per architects selection,and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.BRANDS : COHUMAN , FEATERLITE , HAYWORTH(BASIC RATE OF GANG

Approved Rate of TP10, FP 219, Health Centre, Pal

GANG CHAIR - 3 SEATER 12.00 No. 16665.00

Providing and fixing 3-seater gang sitter with moulded foam, with Aluminium casting and metal

waterfall seats, PU 10mm thick pads on seat & back (chargeable), P.C. frame & with perforation.

as per architects selection,and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.BRANDS : COHUMAN , FEATERLITE , HAYWORTH(BASIC RATE OF GANG

Approved Rate of TP10, FP 219, Health Centre, Pal

CENTER TABLE (0.60 X 0.60) 8.00 No. 9090.00

Providing and fixing corner table of brand as per architects selection,and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.(basic rate per piece is 7000/-

Approved Rate of TP10, FP 219, Health Centre, Pal

WALLPAPER 1.00 SQ MT. 2070.50

Providing & Supplying of WALLPAPER as per selection of approved brand selected by the

architect and complete as per selection & directed by the Architect and approved by the

Engineer in Charge.basic rate of wall paper is 125 / sq ft

Approved Rate of TP10, FP 219, Health Centre, Pal

SINGLE BAY TABLE WITH OUT MODESTY PANNEL (1.20 mt x 0.60 mt) 23.00 No. 33330.00

Providing and fixing of single bay office table of size 1.20 x 0.60 mt and side storage with

drawers and shutters of width 0.45 mt as per drawings,modesty pannel and instructions

provided,using ply of brand greenply ecotech mr,century sainik mr,srg etc,or aluminium pipe

for framing and finishing it with 1 mm unicore laminate and 1mm laminate of brand greenlam

28 or selected by the architect(basic rate of unicore laminate is 3000 per sheet and other 1mm

laminate is 2000 per sheet, of size 8'0 x 4'0)including all material, installation,m.s fabrication

work with powder coating,labour and hardware,drawer channels,hinges,handles,keyboard

trolley,cpu trolley,cable manager,cable trunking system etc waste of materials,polish work as

per instructions etc and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.BRANDS :UNIMAPLE,FEATHERLITE,COHUMAN.

Approved Rate of TP10, FP 219, Health Centre, Pal

"L" TYPE TABLE FOR STAFF (1.80 mt X 0.60 mt ) 4.00 No. 45450.00

Providing and fixing of L-TYPE office table of size 1.80 x 0.60 mt and side storage with drawers

and shutters of width 0.60 mt as per drawings,modesty pannel, and instructions provided,using

ply of brand greenply ecotech mr,century sainik mr,srg etc,or aluminium pipe for framing and

finishing it with 1 mm unicore laminate and 1mm laminate of brand greenlam or selected by

the architect(basic rate of unicore laminate is 3000 per sheet and other 1mm laminate is

per sheet, of size 8'0 x 4'0)including all material, installation, m.s fabrication work with powder

coating with powder coating,labour and hardware,drawer channels, nylon leveler foot

rubber,hinges,handles,keyboard trolley,cpu trolley,cable manager,cable trunking system etc,,

waste of materials,polish work as per instructions etc and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.BRANDS

:,UNIMAPLE,FEATHERLITE,COHUMAN.

Approved Rate of TP10, FP 219, Health Centre, Pal

HIGH BACK CHAIR-TYPE A (ALL CABIN & MEETING HALL) 6.00 No. 10100.00

Providing and fixing of high back office chair, with bifma class IV gas lift. Zen HB Chair, G.F.

Nylon structure with wire mesh on back high density cushion on seat adjustable arms with PU

30 pads synchro tilt with multi locking mechanism and seat slider gaslift for height adjustment

prong aluminium base with 60 mm castors. as per selection and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.Basic rate of chair is 7790/-

per chair. BRANDS : Zen,COHUMAN, BRISTOL, COMO.

Approved Rate of TP10, FP 219, Health Centre, Pal

MID BACK CHAIR-TYPE D( STAFF & MEETING HALL ) 31.00 No. 4040.00

Providing and fixing of mid back office chair of good quality Curved fiber and nylon body with

adjustable lumber support, Reinforced mesh & knee tilting mechanism, 4 way adjustable arms,

5 prong nylon base as per selection and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.Basic rate of chair is 2975/- per chair BRANDS : BRISTOL,

COHUMAN STORM FIX CHAIR

Approved Rate of TP10, FP 219, Health Centre, Pal

PLASTIC CHAIR WITH CUSIONING FOR ALL VISITOR 46.00 No. 2525.00

Providing and sulppying plastic chair with cusining of High-grade 100 percent virgin polymers

which ensure its longevity,Ergonomically designed plastic chair for home with a lacquered

32 finish, heavy-duty armrest, back and seat cushion made up of velvet upholstery and PU material

for maximum comfort as per selection and complete the work satisfactorily as per instruction

of architect or Engineer-in charge.Basic rate of chair is 2200/- per chair BRANDS :Supreme

Approved Rate of TP10, FP 219, Health Centre, Pal

METAL RACKS 72.00 NO. 4545.00

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing and fixing of storage rack of angle slotted type of size 2000 x 36”900 x 18” 460 with

shelfs(20 swg) ,including all hardware,colours,powder coating, channels, etc.and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

STOOL CHAIR 22.00 No. 2222.00

Providing and supplying stool chairs of stainless steel with height adjustable seating option for

34 doctors and patients

per selection and complete the work satisfactorily as per instruction of architect or Engineer-in

charge.Basic rate of chair is 2000/- per chair

Approved Rate of TP10, FP 219, Health Centre, Pal

PAINTING - 24"X24" 2.00 No. 3022.93

35 Providing and fixing of painting as per selection and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.Basic rate of chair is 3000/- per painting

Approved Rate of TP10, FP 219, Health Centre, Pal

PAINTING - 36"X36" 2.00 No. 5383.30

36 Providing and fixing of painting as per selection and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.Basic rate of chair is 4500/- per painting

Approved Rate of TP10, FP 219, Health Centre, Pal

PLANTER WITH REAL PLANTS 10.00 No. 3535.00

Providing and fixing 13 inch dia planter/pots of frp or plastic including drain tray with real

37 indoor plants as per selection,including 3 feet ht plants of brand seasonal dekor or as per

selection and complete the work satisfactorily as per instruction of architect or Engineer-in

charge.(BASIC RATE OF POT IS RS 1880/-)

Approved Rate of TP10, FP 219, Health Centre, Pal

PLANTER WITH ARTIFICIAL PLANTS 10.00 No. 7575.00

Providing and fixing of 22 inch dia planter/pots of roto moulded plastic with artificial indoor

38 plants as per selection and including artificial plants of 4 feet ht of brand seasonal dekor or as

per selection,complete the work satisfactorily as per instruction of architect or Engineer-in

charge.(BASIC RATE OF ARTIFICIAL PLANTER IS RS 3500/- AND POT IS RS 2000/-)

Approved Rate of TP10, FP 219, Health Centre, Pal

WALL CLOCK 15.00 No. 1262.50

Providing and fixing of 12 to 16 inch dia wallclocks of brand quartz or as per selection and

complete the work satisfactorily as per instruction of architect or Engineer-in charge.(basic rate

of wall clock including gst is rs 750/-per piece)

Approved Rate of TP10, FP 219, Health Centre, Pal

OUTDOOR FLOOR MAT 1.00 No. 3535.00

Providing and fixing outdoor floor matt of brand comforts or as per selection and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.(basic size of matt is

Approved Rate of TP10, FP 219, Health Centre, Pal

INDOOR FLOOR MAT 4.00 No. 1262.50

Providing and fixing indoor floor matt of brand my floor or as per selection and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.(basic size of matt is

Approved Rate of TP10, FP 219, Health Centre, Pal

PVC DUSTBIN 30.00 No. 1010.00

Providing & Supplying of 8 to 10 in dia and 12 to 15 inc ht P.V.C. Dustbin of brand cello,pigeon

etc. complete as per selection & directed by the Architect and approved by the Engineer in

Charge.(BASIC RATE OF DUSTBIN IS RS 850/- )

Approved Rate of TP10, FP 219, Health Centre, Pal

12 MM PROFILE LIGHT 24.46 RN MT. 2171.50

Providing & fixing 12mm Surface Led profile Housing with powder coating made from

aluminium with Milky acrylic cover with matt finished, Linear profile with 40 WATT Tranquil

LED STRIPS and driver suggested & as directed by EIC/Consultant.and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.(MODEL NO : SL A010,

BRAND SMART LUMINOUS OR EQUIVALENT

Approved Rate of TP10, FP 219, Health Centre, Pal

44 HANDING LIGHT 5.00 NOS 6060.00

Providing & fixing of HANGING LIGHT with box type aluminium housing ,frosted acrylic at

bottom, end caps,hanging strings etc as per selection with 40 watt Tranquil led strips & driver

suggested & as directed by EIC/Consultant.and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.( MODEL NO -RL024 OF BRAND RANGE LITE OR

Approved Rate of TP10, FP 219, Health Centre, Pal

DECORATIVE WALL LIGHT 2.00 NOS 3726.90

Providing & fixing of DECORATIVE WALL LIGHT as per selection with lamp & driver suggested

45 & as directed by EIC/Consultant.and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.(MODEL NO : RL2012 SQ OF BRAND RANGE LITE OR

Approved Rate of TP10, FP 219, Health Centre, Pal

S.S NAME PLATE SMALL 36.00 NOS 1515.00

Providing and fixing of 2MM TK S.S 316 GRADE matt finish NAME PLATE with cut work and

fixing 3mm acrylic on top or behind of brand Ptglass,astari etc,with all laser and cnc work,and

46 wooden finish back board ,including all material,SCAFFOLDING labour,15 mm ss studs for

mounting and other hardwares, waste of materials etc and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.(BASIC SIZE OF NAME PLATE 150 MM X

Approved Rate of TP10, FP 219, Health Centre, Pal

SOFT BOARD 36.00 SQMT 2424.00

Providing and fixing of soft board of size 1 x 1.8 Quartet White Frame Cork Board, Bulletin

47 Display Board, Pin Board, Lightweight Board for offices with backing of wood with complete

installation and mounting with other hardwares, waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

ECOTECH VINYLE WORK - 2D 20.00 Sq. Mt 2676.50

Providing and fixing of 2-D cut vinyl work of brand 3M including pvc sheet base with all

material,machine cutting, labour,and hardwares, waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Approved Rate of TP10, FP 219, Health Centre, Pal

C - FIRE SYSTEM WITH 5 YEAR O & M

A PUMPS & CONTROL PANELS

A1 MAIN PUMP :-

MONOBLOCK PUMP SET CAPACITY @ 900LPM AT @

METER HEAD, @15HP, RPM = 2900RPM 1 NOS 1,19,915.25

(MAKE:- KIRLOSHKAR / LUBI / KSB)

A2 ELECTRICAL PANEL :-

ELECTRICAL AUTO CONTROL PANEL FOR MAIN PUMP

WITH EARTHINGS AND SIREN. 1 NOS 42,000.00

(MAKE:- L&T / C & S)

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

A3 COPPER FLEXIBLE CABLE WITH CONDUITS & FITTINGS :-

(A) 4 CORE X 6 SQ.MM. (PUMP) 90 MTRS 152.54

(B) 2 CORE X 1.5 SQ.MM. (PRESSURE SWITCH) 120 MTRS 99.00

(MAKE:- POLYCAB / RR)

(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)

Providing and fixing 25mm x 5mm G.I. Strip on surface or in recess for connections etc. as

Supplying & erecting an approved Four Pole 415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty confirming to IS for 100A

Providing and fixing following rating and breaking capacity and pole MCCB with

A6 thermomagnetic release and terminal spreaders in existing cubicle panel board including

drilling holes in cubicle panel, making connections, etc. as required.

(A) 100 A, 35 KA, FPMCCB 1 NOS 7,976.00

B PUMP ROOM VALVES & PIPING

B1 C.I. "Y" TYPE STRAINER:-

PROVIDING AND FIXING OF C.I. "Y" TYPE STRAINER WITH

MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER

GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 100MM DIA 1 NOS 6,664.00

B2 BUTTERFLY VALVE :-

PROVIDING AND FIXING OF BUTTERFLY VALVE WITH

MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER

GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 100MM DIA 2 NOS 5,200.00

B3 C.I. DUAL PLATE NON-RETURN VALVE :-

PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN

VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER

& RUBBER GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 100MM DIA 1 NOS 6,350.00

B4 FORGED BRASS BALL VALVE :-

PROVIDING AND FIXING OF FORGED BRASS BALL VALVE

SCREWED END (SUITABLE FOR WORKING PRESSURE

(MAKE:- ZOLOTO / SANT)

(A) 15MM DIA (FOR PRESSURE SWITCH & GAUGE) 2 NOS 728.81

B5 PRESSURE GAUGE :-

PROVIDING AND FIXING DIAL TYPE PRESSURE GAUGE

WITH ISOLATION BALL VALVE SUITABLE FOR WORKING

PRESSURE MENTIONED. COST SHALL BE INCLUSIVE OF

PROVIDING ANY SHORT PIECES, NIPPLES, ELBOWS WITH

SYPHONE TUBE ETC REQUIRED. (0-21 KG./CM2)

(MAKE:- BAUMER / H.GURU / EXCEL)

B6 PRESSURE SWITCH :-

PROVIDING, FIXING, TESTING AND COMMISSIONING OF

PRESSURE SWITCH SUITABLE FOR AUTOMATION OF

PUMP ETC REQUIRED.

(MAKE:- DANFOSS / HONEYWELL)

SUPPLY, INSTALLATION, TESTING & COMMISISONING OF

G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING

(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED

PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,

BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,

FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.

INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,

CEILING BY USING SUITABLE SUPPORTS ETC.

(MAKE:- ASIAN / APOLLO / JINDAL)

(A) 100MM DIA 6 MTRS 1,800.00

NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /

LOCATION OF PUMPS.

C EXTERNAL HYDRANT & FIRE BRIGADE TANKER INLET

C1 2 WAY FIRE BRIGADE INLET : -

PROVIDING AND FIXING OF 2 WAY FIRE BRIGADE INLET

CONNECTIONS MADE OF CI BODY, 100MM DIA FLANGED

INLET WITH 2 NOS OF INBUILT SS, NRV (BODY TYPE) 2 NOS 4,745.76

WITH PVC BLANK CAP & CHAIN.

(MAKE:- AAAG / NEWAGE)

C2 BUTTERFLY VALVE :-

PROVIDING AND FIXING OF BUTTERFLY VALVE WITH

MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER

GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 100MM DIA 2 NOS 5,200.00

C3 C.I. DUAL PLATE NON-RETURN VALVE :-

PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN

VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER

& RUBBER GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 100MM DIA 2 NOS 6,350.00

SUPPLY, INSTALLATION, TESTING & COMMISISONING OF

G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING

(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED

PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,

BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,

FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.

INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,

CEILING BY USING SUITABLE SUPPORTS ETC.

(MAKE:- ASIAN / APOLLO / JINDAL)

(A) 100MM DIA 36 MTRS 1,800.00

NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

LOCATION OF PUMPS.

D PRESSURISED WET RISER SYSTEM

D1 BUTTERFLY VALVE :-

PROVIDING AND FIXING OF BUTTERFLY VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI

WASER & RUBBER GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 100MM DIA 2 NOS 5,200.00

D2 FORGED BRASS BALL VALVE :-

PROVIDING AND FIXING OF FORGED BRASS BALL VALVE SCREWED END (SUITABLE FOR

WORKING PRESSURE OF 25KG/SQ.CM.)

(MAKE:- ZOLOTO / SANT)

(A) 25MM DIA (FOR RISER DRAIN) 2 NOS 830.51

(B) 25MM DIA (FOR AIR RELEASE VALVE) 2 NOS 830.51

(C) 20MM DIA (FOR HOSE REEL TAPPING) 6 NOS 578.03

D3 FORGED BRASS AIR RELEASE VALVE :-

PROVIDING AND FIXING OF FORGED BRASS AIR RELEASE VALVE SCREWED END. (SUITABLE

FOR WORKING PRESSURE OF 25KG/SQ.CM.)

(MAKE:- ZOLOTO / SANT)

(A) 25MM DIA 2 NOS 1,822.03

SUPPLY, INSTALLATION, TESTING & COMMISISONING OF G.I. "C" CLASS PIPE AS PER IS

WITH PAINTING (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED PAINT), SUITABLE

TYPES OF SUPPORTS, HILTI FASTENERS, BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,

FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.INCLUDING CUTTING, WELDING,

FIXING IN/ON WALLS,CEILING BY USING SUITABLE SUPPORTS ETC.

(MAKE:- ASIAN / APOLLO / JINDAL)

(A) 100MM DIA 24 MTRS 1,800.00

(B) 80MM DIA (FOR HYDRANT BRANCHING) 2 MTRS 1,700.00

D5 HYDRANT VALVE :-

PROVIDING AND FIXING OF SS-304 SINGLE OUTLET FIRE HYDRANT VALVE, HAVING 63MM

FEMALE OBLIQUE TYPE AND 80MM FLANGED INLET, AS PER IS:5290,ISI MARKED WITH ABS

BLANK CAP AND GI CHAIN.

(MAKE:- AAAG / NEWAGE)

FRP SHEETED SINGLE DOOR HOSE BOX

D7 HOSE REEL DRUM SET :-

SUPPLYING AND INSTALLING TESTING AND COMMISSING OF WALL MOUNTING SWINGING

HOSE REEL DRUM AS PER IS 884 AND FITTED WITH 20MM DIA X 30METER LONG HIGH

PRESSURE RUBBER HOSE PIPE WITH S.S. SHUT OFF NOZZLE WITH NECESSARY MS BRACKET 6 NOS 10,593.22

FOR HOLDING HOSE REEL DRUM.

(MAKE :- AAAG / NEWAGE)

D8 HOSE PIPE :-

PROVIDING AND FIXING OF RRL FIRE HOSE OF 63MM DIA X 15 METER AS PER IS:636, TYPE-A,

ISI MARKED WITH SS-304, 63MM MALE & FEMALE COUPLING AS PER IS:903, ISI MARKED

BANDED WITH COPPER WIRE.

(MAKE:- AAAG / NEWAGE)

D9 HEXAGONAL NOZZLE :-

PROVIDING AND FIXING OF SS-304, 63MM X 20MM SHORT BRANCH PIPE WITH NOZZLE AS

PER IS:903, ISI MARKED. 6 NOS 1,652.54

(MAKE:- AAAG / NEWAGE)

E AUTOMATIC SPRINKLER SYSTEM

E1 BUTTERFLY VALVE :-

PROVIDING AND FIXING OF BUTTERFLY VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI

WASER & RUBBER GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 50MM DIA 2 NOS 4,194.92

E2 FORGED BRASS BALL VALVE :-

PROVIDING AND FIXING OF FORGED BRASS BALL VALVE

SCREWED END (SUITABLE FOR WORKING PRESSURE

(MAKE:- ZOLOTO / SANT)

(A) 25MM DIA (FOR SPRINKLER DRAIN) 2 NOS 830.51

SUPPLY, INSTALLATION, TESTING & COMMISISONING OF G.I. "C" CLASS PIPE AS PER IS

WITH PAINTING (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED PAINT), SUITABLE

TYPES OF SUPPORTS, HILTI FASTENERS, BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,

FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.INCLUDING CUTTING, WELDING,

FIXING IN/ON WALLS,CEILING BY USING SUITABLE SUPPORTS ETC.

(MAKE:- ASIAN / APOLLO / JINDAL)

(A) 50MM DIA 18 MTRS 949.15

(B) 40MM DIA 12 MTRS 604.56

(C) 25MM DIA 48 MTRS 550.85

E4 SPRINKLER :-

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF STANDARD RESPONSE

QUARTZOID BULB TYPE SPRINKLER WITH SCREWED END CONNECTION.SPRINKLERS SHALL

BE UL LISTED / FM APPROVED WITH CHROME FINISH.

(MAKE:- TYCO / NEWAGE / HD)

(A) 15MM DIA - RATING 68 DEGREE (PENDENT TYPE) 16 NOS 327.72

E5 50% MAP ABC TYPE FIRE EXTINGUISHER :-

(A) 6KG CAPACITY 6 NOS 3,059.32

(MAKE:- SAFEX / KANEX / V-SAFE)

E6 CO2 TYPE FIRE EXTINGUISHER :-

(A) 4.5KG CAPACITY 6 NOS 8,127.12

(MAKE:- SAFEX / KANEX / V-SAFE)

E7 MODULAR TYPE AUTOMATIC FIRE EXTINGUISHER :-

(A) 5KG CAPACITY (FOR METER ROOM) 2 NOS 2,656.50

(MAKE:- SAFEX / KANEX / V-SAFE)

F FIRE ALARM SYSTEM

F1 FIRE ALARM PANEL :-

2 LOOP ADDRESSABLE TYPE FIRE ALARM PANEL WITH

(MAKE:- MORLEY BY HONEYWELL)

F2 MANUAL CALL POINT :-

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

ADDRESSABLE TYPE MANUAL CALL POINT WITH BASE.

(MAKE:- MORLEY BY HONEYWELL)

F3 SOUNDER STROBE :-

ADDRESSABLE TYPE SOUNDER STROBE WITH BASE.

(MAKE:- MORLEY BY HONEYWELL)

F4 SMOKE DETECTOR :-

ADDRESSABLE TYPE SMOKE DETECTOR WITH BASE.

(MAKE:- MORLEY BY HONEYWELL)

F5 FAULT ISOLATOR :-

ADDRESSABLE TYPE FAULT ISOLATOR WITH BASE.

(MAKE:- MORLEY BY HONEYWELL)

F6 COPPER ARMORED CABLE :-

(A) 2 CORE X 1.5 SQ.MM. 1500 MTRS 101.69

(MAKE:- POLYCAB/RR CABLES/KEI)

(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)

NIGHT GLOVE SIGNAGES ON 3MM PVC FOAM SHEET.

(A) FIRE EXTINGUISHER (5 X 5 = 25 SQ.INCH X 6 NOS) 150 SQ. INCH 6.78

(B) FIRE HOSE REEL (5 X 5 = 25 SQ.INCH X 6 NOS) 150 SQ. INCH 6.78

(C) EMERGENCY EXIT (12 X 4 = 48 SQ.INCH X 6 NOS) 288 SQ. INCH 6.78

(D) FIRE PUMP (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78

(E) FIRE PUMP PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78

(F) MANUAL CALL POINT (5 X 5 = 25 SQ.INCH X 6 NOS) 150 SQ. INCH 6.78

(G) HOOTER (5 X 5 = 25 SQ.INCH X 6 NOS) 150 SQ. INCH 6.78

(H) FIRE ALARM PANEL (12 X 4 = 48 SQ.INCH X 1 NOS) 48 SQ. INCH 6.78

(H) AMC CHARGES

H1 ANNUAL MAINTENANCE CHARGES :-

PROVIDING COMPLETE DEMOSTRATION OF COMPLETE FIRE SYSTEM & OBTAINING FIRE

CERTIFICATE FROM FIRE DEPARTMENT ALONG WITH FORM-16 (AMC CONTRACT START

AFTER 1ST YEAR OF INSTALLATION.)

SCOPE OF WORK :

# AMC CONTRACT IS FOR QUATERLY VISIT.

# OILING & SERVICING OF COMPLETE FIRE SYSTEM.

# DEMOSTRATION & TRAINING TO COMPLETE STAFF

# REPLACEMENT OF DEFECTIVE PARTS ON CHARGEABLE

BASIS AFTER 1 YEAR.

NOTE :- EVERY YEAR IT SHOULD BE 7% ON TOTAL TENDER AMOUNT.

TOTAL OF GROUPS (A+B+C+D+E+F+G+H) WITHOUT GST

TOTAL OF GROUPS WITH GST

D - GROUND DEVELOPMENT WORK

(A) Paver block & VDS Road

Clearing and grubbing road land including uprooting rank vegetation grass

1 bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and 0.06 Hectare 82434.27

disposal of unserviceable materials(A) By manual means in area of light jungle

R&B SOR 23-24 IT NO. 26117A PAGE NO.

Box Cutting the road surface to proper slope and camber for making base includinng removing

the excavated stuff and depositing on the road side slope as directed up to 50 mt. lead.

SMC SOR-PAGE NO 20 IT NO GD.1

Preparation of subgrade with compacting, Leveling and consolidation of subgrade with

3 miniroller/plate vibrator machine including watering and filling in depression occur the 664.00 S.M. 4.93

process as directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.2

Providing & laying Granular Sub Base(GSB) confirming to Grading V of Table 400.0 of

compacted th. Of 150 mm with specified graded stone metal and sand mixed in place and laid

4 with mechanical means spreading with motor grader and compactiong with vibratory roller 99.00 C.M. 1418.04

having miimum 80-100 KN static weight to achieve desired dencity of 98 % of MDD including all

material, labour, machinery with all leads and lifts etc. comp.

SMC SOR-PAGE NO 20 IT NO GD.9

Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone agg. 40 m.m Nominal

size )& curing comp. incl. cost of from work in :Foundation & Plinth

SMC SOR-PAGE NO 1 IT NO

providing and laying 200 micron plastic sheet on prepared sub base as per instruction of

Engg. In charge etc. complete.

SMC SOR-PAGE NO 20 IT NO GD.12 MR

Supplying & filling fine sand (pana) in 75 mm /100 mm / 150mm compacted thickness over

7 the base including necessary compaction, watering etc. compacted. Item includes levelling by 11.00 C.M. 413.09

using vibratory plates compacted machine and as directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.4

Providing 100mm th. Ready made c.c. kerb of strength M-20 (Size 300mm X 380mm) purchased

from SMC's approved paverblock manufacturer & setting in line level and in truly vertical

8 postion, including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust ) smooth 151.00 R.MT 228.00

pointing in C.M. 1:1 ( 1 part of cement : 1 part of coarse sand) including watering etc. complete

and as directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.6 MR

Providing interlocking type Rubber moulding cement concrete Paver Block of approved shape,

design & colour having 60 mm thickness (M-35) Purchased from S.M.C's approved paverblock

9 manufactures only & fixing on fine sand bedding. Item includes leveling by using vibratory

plates compacted machine. Item also includes all materials, labour, equipments, tools, plants,

watering, cleaning etc. Complete

With colour 5.00 S.M. 524.00

Without colour 5.00 S.M. 524.00

SMC SOR-PAGE NO 20 IT NO GD.7 MR

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, ramming & consolidation

SMC SOR-PAGE NO 20 IT NO GD.3

Providing & filling in plinth with murrum or selected soil in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete.

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 sand:3 graded

12 stone agg. 20 mm nominal size) & Vaccuum Dewatering technique including floating surface

with a skim powder floater, curing etc. complete.

Internal road 99.00 C.M. 5981.00

SMC SOR-PAGE NO 20 IT NO GD.10

Cutting of Groove 5.00 to 7.00 mm th. In VDS for depth of 1/3 of total thickness with filling of

epoxy sealent as directed by engineer in charge

SMC SOR-PAGE NO 20 IT NO GD.13

Providing and fixingTMT/CRS bar reinforcement for R.C.C. work including binding and placing

in position etc. comp.

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Upto G.L./P.L. 4455.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

Total amount of Paver Block & VDS Road

Total amount of Paver Block & VDS Road

1 Demolition including stacking of serviceable materials with all lead and lift. (i)) RCC Work 19.00 C.M. 1057.47

SMC SOR-PAGE NO 18 IT NO

Demolition of brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (i) On Cement

SMC SOR-PAGE NO 18 IT NO

Dismentalling tiled or stone floors laid in mortar including stacking of serviceable material and

disposal of unserviceable material with all lead and lift

SMC SOR-PAGE NO 18 IT NO

Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

4 serviceable material and disposal of unserviceable from site 304.00 S.M. 19.57

of work with all lead and lift.

SMC SOR-PAGE NO 18 IT NO

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments, tools, material,

labour, etc. Standard procedure as mentioned in manufacturer's specifications shall be strictly

followed, which shall be submitted and got approved from the authority prior to start of work.

The rate shall also include cost of drilling of hole of required diameter and depth as mentioned

5 in manufacturer's specification, cleaning the hole with required air blower and other necessary

tools and tackles, positioning, providing and grouting chemical, allied fixtures and fasteners, etc.

but excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and equipments, etc. complete as directed

by the engineer-in charge.

SMC SOR-PAGE NO 11 IT NO

Dismentalling of R.C.C work by electric breaker, rate to include all lead, lift , scaffoulding,

transportation, and labour etc. complete. As directed by engg. Incharge.

Total amount of Demolition

Total amount of Demolition

(C) Compound wall

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the surplus

1 excavated soil as directed within a lead of 50 M. For following diameter of piles.

for 250 mm dia 190.00 R.M 326.84

for 300 mm dia 0.00 R.M 391.74

SMC SOR-PAGE NO 9 IT NO

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the

2 excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

( 1 ) up to 1.5 mt. Depth 34.00 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 gradedstone agg. 40 mm

nominal size) & curing comp. excl.cost of form work in

(A) Foundation and plinth 5.00 C.M. 2680.21

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stoneagg. 20 mm

4 nominal size)& curing comp. Includ.cost of form work but exclu.Cost of reinforcement for

reinforced concrete work in :

(A) foundation, footing, base of columns and mass concrete 10.00 C.M. 3637.34

SMC SOR-PAGE NO 9 IT NO

Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4graded graded stone agg.

5 mm nominal size) finishing smooth curing etc. comp.Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 14.00 C.M. 8593.80

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

upto G.L./P.L. 0.00 C.M. 7665.60

SMC SOR-PAGE NO 9 IT NO

Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4graded graded stone agg.

6 mm nominal size) finishing smooth curing etc. comp.Incld. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.08 sq.mt. 9.00 C.M. 12123.79

SMC SOR-PAGE NO 9 IT NO

Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone agg. 20 mm nominal size) & curing

complete including cost of formwork in wall caps & copping.

SMC SOR-PAGE NO 9 IT NO

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and

SMC SOR-PAGE NO 1 IT NO

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. workincl. bending,

binding & placing in position etc. comp.

Upto G.L./P.L. 4970.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

Brick work using common burnt clay building bricks having crushing strengthnot less than

10 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

At ground floor 63.00 C.M. 4511.97

SMC SOR-PAGE NO 2 IT NO

Half brick masonry in common brunt clay building bricks having crushingstrength not less than

35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth

(C)Fly Ash Bricks

At ground floor 0.00 S.M. 625.53

SMC SOR-PAGE NO 2 IT NO

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing & Applying 10mm.th.cement plaster in single coat on brick/concrete walls similar

12 surfaces for plastering & finished even & smooth with afloating coat of cement slurry mixed

with admixture of lime or neeru inrequired proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

At Ground Floor 0.00 S.M. 189.79

(B) For ceilings & soffits

At Ground Floor 0.00 S.M. 214.60

SMC SOR-PAGE NO 3 IT NO

Providing and applying 20mm. thick sand faced cement plaster on walls or similar surfaces

13 at all floor levels,consisting of 12mm avrerage thick backing coat of C.M. 1:3 (1 cement :3 sand )

and 8mm thick finishing coat of C.M. 1:1(1 cement :1sand).

At Ground Floor 780.00 S.M. 330.88

SMC SOR-PAGE NO 3 IT NO

14 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For all floor

At Ground Floor 0.00 R.M. 41.66

SMC SOR-PAGE NO 3 IT NO

15 Pro. smooth plaster patta

At Ground Floor 529.00 R.M. 27.27

Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor

At Ground Floor 715.00 R.M. 50.00

SMC SOR-PAGE NO 3 IT NO

Providing & applying two coats of weather shield max paint (3 coats may be required in case

of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and manufacturers.

Surface Preparation : surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir

17 brush, followed by water jetting if required. Fill up all minor cracks and defects with white

cement and sand mixture in the ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean the surface thoroughly using wire

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of

putty is not recommended. Minimum 4-6 hours duration is required between each coat of

weather shield max paint

(A) For wall 780.00 S.M 82.00

SMC SOR- COLOUR WORK PAGE NO 16 IT NO

Providing and fixing M.S. Gate of required pattern to wooden frames of windows etc. at all floor

18 levels with M.S. flats at requuired spacing & frame aroundsquare or reound bars with round

headed bolts & nuts or by crews incl. Priming coat of Red lead paint etc. comp.

Ground Floor 1500.00 Kg 69.47

Providing & fixing M.S. Grills of required pattern to wooden frames of windows etc. at all

floor levels with M.S. flats at required spacing & frame around square or round bars with round

headed bolts & round headed bolts and nuts or by screws incl. Priming coat of Red lead paint

etc. comp. (A) Plain Grill For all floors

All Floor 3030.00 KG. 104.20

SMC SOR-PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and other metal surface with

synthetic enemal paint, burshing to give an even shade including cleaning the surface of all dirt,

dust and other foreign matters.

Ground Floor 138.00 S.M. 65.31

SMC SOR- COLOUR WORK PAGE NO 15 IT NO

Providing and fixing hot dip Concertina Coil of 610mm dia made out of 2.59mm (12SWG) hot

dip galvanized (G.I coating not less than 200 gm/sq.m)th. Wire having 80 nos. of spies and

nos. of clips made out of stainless steel (AISI 304) 1.5 mm th. Dia, G.I. Strips 0.5 mm ht. (G.I

21 coating not less than 120 gm/sq.m ) weight of one coil should not be less than 15 kg etc. 150.00 RMT 150.00

complete, at the top of compound wall fixed with S.S clips and binding wires wherever

necessary etc. complete. (Note : Stretching lenght of one coil should not be more than 9 mt.) As

per Engg. In charg direction.

Total amount for Comp. Wall & Entry Gate

Total amount for Comp. Wall & Entry Gate

LAWN : Area cleaning and side grading, removing unwanted materials, plants, chrubs,wild

grass, weeds,debris,rubbish,etc. Excavating up to depth 30 C.M surface dressing leveling,

making slopes for drainage according to landscape, Disposal of unwanted materials with all

labour and tools. Development of lawn including preparation of bed ground, spreading and

1 mixing the good soil with Farm Yard Manure, Gypsum, fertilizer soil with farm Yard Manure, 40.00 S.M 90.00

Gypsum, Fertilizer bas required hand specified. Planting of lawn grass bits roots of approved

quality, watering and specified. Planting of lawn grass bits roots of approved quality, watering,

and specified. Planting of lawn grass watering mowing, weeding etc. maintenance of developed

lawn for a period of 6 months.

Supplying on site plants with following specifications . Plants would be in good condition and of

specified height. The rates would be inclusive of all taxes, sales tax, Octroi,transportaion etc.

complete F.O.R. site. Conditions of plant would be verified at the time of selction as well

delivery. All complete and as per instructions of the Engineer-in-charge.

Lagerstroemia thorell II - 3.66m ht 5.00 Nos. 270.00

Millingtonia hortensis - 3.66m ht 5.00 Nos. 270.00

Azadirachta Indica - 2.13m ht 5.00 Nos. 270.00

Gresses & Bamboos

Bambusa valgaris - 1.83m ht. 5.00 Nos. 75.00

Nephrolepis exalotta smithi - 0.45x0.30m 5.00 Nos. 20.00

Champa - 3.66m ht. 5.00 Nos. 270.00

Total amount of garden

Total amount of garden

(E) Water Supply & Sanitary

Providing and constructing simple chamber of 23cm. of B.B. masonary wall in c.m. 1:5 incl.

15mm. thick cement plaster in c.m 1:3 inside and out side to exposed faces R.C.C. top slab

1 with1:2:4 mix (1 cement : 2 sand : 4 grade ston aggregate 20mm size), foundation concrete 15.00 No 2932.93

1:5:10 with fixing Precast RCC. heavy duty cover on top etc. inside dimension 455 x 610mm &

450mm deep for single pipe

SMC SOR-PAGE NO 7 IT NO

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M 1:1 of following nominal

internal diameters incl. Testing of pipes and joints etc. Comp

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

SMC SOR-PAGE NO 7 IT NO

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex

make for water supply line at all floor levels incl. fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc. comp. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

SMC SOR-PAGE NO 8 IT NO

4 Providing and fixing C.P brass screw down bib tap at all floor level polished bright etc. comp.

SMC SOR-PAGE NO 8 IT NO

Providing and fixing gun metal check or non return full way wheel valve at floor levels,etc.

SMC SOR-PAGE NO 8 IT NO

Total amount of Plumbing & Sanitation

Total amount of Plumbing & Sanitation

(F) UNDERGROUND TANK FOR FIRE

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering, vibrating,

curing & mixed with approved water proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water proofing agent to be mixed with 50 kg. cement

bag shall be as recommended by the manufacture of the water proofing material, concrete work

for top, bottom slab & side pardi for Under ground Tank & Item incl. Necessary excavation &

1 refilling the available earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 50000.00 LITER 5.46

outside wall, inside R.C.C. pardi as per design, 10mm.th. water proofing cement plaster in C.M.

1:3 with smooth finishing,watering etc.Comp.to all inner face & bottom of tank curing etc. comp.

incl. Locking arrangement, outlet, inlet, overflow & wash out pipe arrangement as necessary &

C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per structural drawing excluding

Steel & as directed by Engineer-in-charge

SMC SOR-PAGE NO 6 IT NO

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson,Nitco,Somani ,Bell

make at all floor levels, in flooring, treads of steps & landings laid on a bed of 12 mm. Av.

Th.C.M.1:3(1cement :3 sand) finished with flush pointing in white cement etc.com. For all floors

SMC SOR-PAGE NO 4 IT NO

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, Jhonson,Nitco,Somani,Bell

make at all floor levels in skirting risers of steps & dado on 10 mm. th. C.M.1:3 (1cement :3

sand) including necessary cement paste for fixing and joined with white cement slurry etc.

complete. For all floors

SMC SOR-PAGE NO 4 IT NO

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending,

binding & placing in position etc. comp. Upto G.L./P.L.

SMC SOR, ITEM NO.-

Total amount of Underground Tank for Fire

Total amount of Underground Tank for Fire

(G) RECHARGE BORE WELL

Drilling 300mm Diameter bore in all types of starta up to any Depth including cost of bentonite

1 powder carting rings etc. complete the drilling shall be done by mud flushed rotary 120.00 R.M 857.00

equipments; bore holes should withstand at least till period of subsequent

CE/HYD/01/2024-25 IT No

Supplying best Quality of well- sorted " SEVALIA "pea gravel having size 4mm to 6 mm at site

CE/HYD/01/2024-25 IT No

Providing and fitting bail plug having length 0.45mtr. from M.S medium class pipe as per ISI for

200 mm diameter pipe.

Development of each water bearing zone come across up to the depth of tube well (size

4 mm diameter & depth more then 150 ft.) by lowering 100 mm diameter drop line and 32 mm 3.00 JOB WORK 4000.00

diameter GI air line for each Zone with air compressor of capacity not less.

5 Providing & Fixing MS Clamps with threaded of standard make suitable for ERW pipes.

(a) For 200 mm Diameter ERW blank pipe with size 750 x 75mm x 10mm thick suitable for

200mm diameter.

Excavation for foundation in and all kinds of soil including

leveling and ramming the bottom of trenches and foundationpits, shoring, strutting, dewatering

if required, slush removing, filling the sides up to original ground level for rectangular chamber

CE/HYD/01/2024-25 IT No

Providing and laying Cement Concrete M-100 grade 1:3:6 (1 cement: 3 coarse sand : 6 hand

7 brocken stone aggregate 20mm nominal size ) and curing complete excluding cost of form work 3.00 C.M 3005.76

in chamber P.C.C(without forms work) work complete. .( S.O.R.-2023-24

SOR 23-24 IT-05 PG-01

Providing & laying Fly ash Brick masonary having crushing strength not less then 70kg/sq.cm.

8 1:6 (1 cement : 6 fine sand) with scaffolding, watering, curing etc. complete with all labours and 6.00 C.M 4511.97

materials.various area as directed by incharge .

SOR 23-24 IT-16 PG-02

Providing 10mm thick Cement Plaster in single coat on brick/concrete walls far interior

9 plastering up to Floor two level and finished even and smooth in cement morter 1:3(1 cement 3 15.00 S.M. 189.79

sand various area as directed by incharge) .

SOR 23-24 IT-24 PG-03

Providing, fixing M.S Jali frammed work (three piece with handle fitting) on Opening portion

10 Precast Module Structure for Prevention of Recharge bore well structure,size including framme, 90.00 Kg. 90.47

heavy required Angle (40 x 40 x 6mm), flat pati (25 x 6mm),cuttin

SOR 23-24 IT-98 PG-09

Providing & Supplying 200mm dia mater 1.5mm L.C.G (Low Carbon Galvanise) 'V' wire screen

11 pipe of Johnson or approved make ISI including lowering, fixing, jointing in bore hole as per 36.00 R.M 2100.00

aquifer depth and pipe assembly given as per site condition Soil stat

Providing, Supplying, Fixing in bore hole 6Kg/cm2 P.V.C Pipe of approved Quality

12 (Prince,Suprem,Finolex) with ISI mark including nesessary fittings and providing as per site 90.00 R.M 850.00

sitution and directed by Engineer –in- charge. ( 200 mm ( 8'') dia

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

Providing, Supplying, Fixing P.V.C. 6 Kg/Cm2 Pipe IS stanadard for down take / inlet from

13 Bldg./ Structure to Sand filter Chamber, including piping/ plumbing, fitting, wall clamping,

necessary excavation and filling etc. complete as per site situation

(a) 110mm Dia.,6 Kg/Cm2 P.V.C. pipe. 15.00 R.M 325.00

(b) 160mm Dia., 6 Kg/Cm2 P.V.C. pipe. 36.00 R.M 525.00

Providing, supplying, fixing and installing M 300 Grade. precast size 1.5 dia x 2.35 mt. height

14 ,top 75mm thick in 2 half pieces Sand Filteration chamber (2 layer Type of Precast module )as

per Design, Drawing.including necessary excavation, filling, dr

(a) 1 layer type of Precast module 0.00 NO. 18500.00

(b) 2 layer Type of Precast module 3.00 NO. 25000.00

Proving & fixing in position Johnson make and equivalent ... 'V' wire L.C.G screen pipe 1.00 mm

15 size of filter assembly of pair –ID 205mm & OD 217.50mm of 0.5mm slot size and

ID 416 mm and OD 428 mm of 1.00mm slot size as per site situation

(a) 1.0 mt. length. 0.00 SET 7500.00

(b) 2.0 mt. Length. 3.00 SET 14000.00

Borehole Video photography all the fresh new fresh new bores or few selected as desired for

better understanding & clarity of work undertaken as directed by Engineer -in-charge.

Supplying water tankers for constant water supply at tube well Compressor work and

17 cleaning of work site after completion of entire job (testing) inluding cleaning of mud 1.50 JOB 500.00

etc.Location as directed by Engineer-in-charge.

Providing and Fixing Recharge Borewell name boards as per standard I.R.C type design of steel

18 plate including painting lettering etc. complete with fixing in C.C 1:4:8 block with necessary 3.00 No 5006.00

Soil Investigation Test report from Govt.approved authorised laboratary (Prior inserting bore

19 Pipe) of each bore shall be submitted by Contractor and soil sample of various starta shall be 3.00 EACH BORE 6000.00

first collected in Polythene bag and than submitted in transparent

Removal of surplus excavated earth of excavated mud-pits and water harvesting chambers up

to the lead of 5.0 km as per the instruction of Engineer In Charge

Total amount of Recharge Bore Well

Total amount of Recharge Bore Well

(H) PARKING SHED

WORK UP TO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the

1 excavated stuff upto 50 mt. Lead & all lift, watering etc.Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or soft soil

(1) Up to 1.5 Mt. depth 92.00 C.M 117.26

SMC SOR-PAGE NO 1 IT NO

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal

2 size)&curing comp. excl. cost of form work in :(a) foundation

(A) Foundation 10.00 C.M 3005.76

SMC SOR-PAGE NO 1 IT NO

providing, mixing, placing, compacting by machine vibrator, curing, testing M25 design mix

concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement.-(A) foundation,

footing, base of columns and mass concrete

SMC SOR-PAGE NO 14 MIX DESIGN

Providing, mixing, placing, compacting by machine vibrator, curing, testing M25 design mix

concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement. work in : Upto

(2) Having cross sectional area more than 0.085 sq. mt.up to 0.12 sqmt. 8.00 C.M 12587.74

SMC SOR-PAGE NO 14 MIX DESIGN

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending,

binding & placing in position etc. comp. Upto G.L./P.L

SMC SOR, ITEM NO.-

WORK ABOVE PLINTH LEVEL

Steel work welded in built up sections,frame work including cutting, hoisting, fixing in position

and applying apriming coat of red lead paint :-

(A) In beams and joists channels angles, tees, flats with connection plats or angle cleats as in

main and cross beams, hip and trussed purlins connected to common raffers and the like.

SMC SOR-PAGE NO 9 IT NO

Painting two coat (excluding priming coat) on new steel and other metal surface with

2 synthetic enemal paint, burshing to give an even shade including cleaning the surface of all dirt, 200.00 S.M. 65.31

dust and other foreign matters.

SMC SOR-PAGE NO 15 IT NO

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet 0.5 mm.

thick roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm dia with bituman and

impet washer filled with white lead etc. Excluding the cost of purlins rafter and trusses. (Tata /

3 Jindal or equivalent) 400.00 S.M. 999.00

SMC SOR-PAGE NO 9 IT NO

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3 gutter

4 with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including marking necessary 200.00 S.M. 412.00

connection with rain water pipes. (i) 0.63mm thick

SMC SOR-PAGE NO 9 IT NO 106 MR

Total amount of Parking Shed A+B

Total amount of Parking Shed A+B

(I) BIO MEDICAL WASTE ROOM/ SECURITY ROOM/ ELECTRICAL ROOM

WORK UP TO PLINTH LEVEL

Excavation for foundation including sorting out and stacking off useful materials and disposing

of the excavated stuff up to 50 mt. lead and all lift, watering etc.comp.

(A) loose or soft soil with machineries

(1) 0 To 1.5 mt. Depth 30.00 CMT 117.26

(2) 1.5 To 3.0 MT Depth 16.00 CMT 129.98

(3) 3.0 to 5.0 Mt. depth 0.00 CMT 142.52

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal

size)&curing comp. ncl. cost of form work in :(a) foundation & Plinth.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm nominal

3 size)& curing comp. Includ.cost of form work but exclu. Cost of reinforcement for reinforced 5.00 CMT 3637.34

concrete work in : (A) Foundation, footing, Base of columns and Mass concrete.

SOR DESCRIPTION

NO. QUANTITY UNIT RATE AMOUNT

providing, mixing, placing, compacting by machine vibrator, curing, testing M25 design mix

4 concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement.

(A) foundation, footing, base of columns and mass concrete 3.00 CMT 4311.47

Providing, mixing, placing, compacting by machine vibrator, curing, testing M25 design mix

5 concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement.

(2) c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 3.00 CMT 11136.62

(B) BEAM: (G.B./P.B.)

(2) c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 4.00 CMT 8075.85

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D reinforcement for R.C.C. work incl.

bending, binding & placing in position etc. comp. Upto G.L./P.L.

Filling in trenches with available excavated earth in layer not exceeding 20 cm in depth

consolidating each deposited layer by ramming & waetring

TOTAL COST UP TO PLINTH A

WORK ABOVE PLINTH

providing, mixing, placing, compacting by machine vibrator, curing, testing M25 design mix

8 concrete as per IS 456:2000 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of reinforcement.

(2) Having cross sectional area more than 0.085 sq. mt.up to 0.12 sqmt. 3.00 CMT 11136.62

(2) Having cross sectional area more than 0.085 sq. mt.up to 0.12 sqmt. 11.00 CMT 8075.85

(3) Slabs having more than 10 Cm & upto 13 Cm

Ground Floor 1.00 CMT 9419.25

Ground Floor 1.00 CMT 6913.25

Providing & fixing IS Mark TMT Bar FE 500 / FE 500d reinforcement for R.C.C. work incl.

bending, binding & placing in position etc.comp.-

Ground Floor 2850.00 Kg 76.21

Providing & construction brick work using Fly Ash bricks having crushing strength not less than

35 Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp

Ground Floor 20.00 CMT 4237.00

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls similar

surfaces for plastering & finished even & smooth with a floating coat of cement slurry mixed

with admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1 cement :

(A) for wall and similar surfaces

Ground Floor 94.00 SMT 189.79

(B) for ceilings and soffits of stairs

Ground Floor 40.00 SMT 214.60

Providing and applying 20mm. thick sand faced cement plaster on walls or similar surfaces

12 consisting of 12mm. thick backing coat of c.m. 1:3 ( 1 cement : 3 sand ) and 8mm. thick finishing

coat of c.m. 1:1 ( 1cement : 1 sand ) etc. comp.

Ground Floor 137.00 SMT 330.88

Providing 20 mm wide throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For