Construction of 1 No. Type-I Quarter over existing Type-I Quarter at Trout Hatchery Batahar, District Kullu (H.P.)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for all heights Suspended floors, roofs, landings, balconies and access platform as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for all heights Edges of slabs and breaks in floors and walls Under 20 cm wide as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood 35 mm thick as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shuttersKiln seasoned and chemically treated hollock wood as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.