Interior Fit-Out Works of 6 nos. SIDBI Branch Offices (3 nos. BOs and 3 nos. EBOs) in North Zone covering Delhi, Punjab, Uttarakhand, Himachal Pradesh and Ladakh)

Total Amount DSR &

Sr.No Description DSR Amount Non- DSR Amount

Total (DSR +MR) BOQ Amount 14,301,588.00

Total cost (i/c GST) 14,301,588.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - CIVIL WORKS

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

CIVIL & INTERIOR WORKS

Dismantling tile work in floors , Wall and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 12 113.55 1362.60

Demolishing brick work manually / by mechanical means including stacking of serviceable

1.2 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-Charge.

15.7.4 In cement mortar Cum 3 2060.20 6180.60

1.3 1.1 Carriage of material by mechanical transport including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)

2.1 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 12 614.20 7370.40

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of

2.5 13.4 12 mm cement plaster of mix

13.4.1 1:4 (1 cement: 4 coarse sand) SQM 15 357.35 5360.25

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP

2.6 MR Punning over cement plaster in line & plumb finished smooth to receive paint. (Internal SQM 45 301.33 13559.68

surfaces of walls).

3 FLOORING WORKS

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In

3.01 MR Natural Finish. Thickness 1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete metre 150 325.00 48750.00

with Rubber/ PVC Jointers and Gasket.

Supplying and fixing of 3mm Luxury vinyl flooring Top layer of approved design & Pattern as per

architects approval & Instructions

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be of Type 6 nylon loop pile

carpet tiles/Plank. The carpet shall have sufficient gauge (1/10 ~ 1/12) with sufficient stitches

(10~13) per inch. The carpet shall be solution dyed fibre content or with injection printing

technology. The carpet shall have the pile height ranging from (2.0 ~ 3.0) mm with average

density higher than 4500 Oz/ cubic yard. The total thickness of the carpet tile shall also

range from (5.5 ~ 6.0) mm.

4 FALSE CEILING WORKS

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20

mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs

at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm

at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all

as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the

cost of painting with

12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

Providing & fixing of Silhoutee Frame ceiling tile in size 600x600x15mm having noise reduction co-

efficient of 0.7, Density of 100 kg / m3, and Humidity resistance of 95% to be laid on exposed grid

system with white wrap comprising main runner 3.00 mm x 24mm web height cross tee 1.2 mtrs x 24

mm web height and 0.6 mtrs x 24 mm web height. The wall angle shall be 3.0 mtrs.

5 PARTITIONS AND WALL CLADDING

WALL PANELING :-Providing and fixing Paneling upto ceiling height consisting of Aluminium

frame and required board, frame work made of Aluminium section made of 50x25 mm , consisting

of floor and ceiling channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick, fixed to

the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia

meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs

48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by

6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall

5.01 MR with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to

centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor

and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width

(0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two

boards, fixed to the studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at

corners (25 mm x 25 mm x 0.5 mm), joint finisher as per manufacture's specification and direction of

engineer in charge all complete.

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Paneling with 11- 12 mm thick HDHMR board to IS: 5509 sq m 75 2414.28 181071.00

WALL PARTITION-Providing and fixing partition upto ceiling height consisting of Aluminium

frame and required board, frame work made of Aluminium section made of 50x25 mm , consisting

of floor and ceiling channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick, fixed to

the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia

meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs

48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by

6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall

5.02 MR with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to 0

centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor

and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width

(0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two

boards, fixed to the studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at

corners (25 mm x 25 mm x 0.5 mm), joint finisher as per manufacture's specification and direction of

engineer in charge all complete.

Both side 12 mm thick HDHMR board to IS: 5509 sq m 240 3450.00 828000.00

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing Plywood

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring

5.04 21.18 type fixing arrangement and making necessary holes etc. for fixing required door fittings, all sq m 27 5325.90 143799.30

complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid

Providing and fixing partition comprising 12 mm thick clear toughened safety glass of approved make

conforming to IS 2553 (Part-I) and IS 14900, fixed in anodized aluminium U-channels of approved size

and section at top, bottom and sides as required. The work shall include machine polished exposed

edges of glass, neoprene packing, EPDM gaskets, silicone sealant, aluminium channels, screws,

fasteners, anchoring arrangements, cutting, handling, transportation, installation, cleaning and all

incidental works complete as per approved drawings and direction of Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

5.05 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length

(hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood cum 0.60 142949.70 85769.82

Providing and fixing partition top beading 80x12 mm, including cutting, shaping, adhesive/fastener

5.06 MR fixing, edge finishing, surface preparation, and applying polish with matching finish, complete in all RM 30 355.00 10650.00

respects as per site requirement and engineer-in-charge directions.

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to

IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to

wall wirh screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete

as per directions of Engineer-in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative

type, core of block board construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sq m 24 2392.65 57423.60

Providing and applying panelling/partition with matching colour groove finish and polishing, including

all materials, labour, surface preparation, fixing accessories, edge finishing, sanding, colour

matching, groove cutting, polishing coats, and complete finishing as per site requirement and

engineer-in-charge directions.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic AC 10 as

per IS : 1868 ), transparent or dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with

necessary screws, etc. complete.

Door Closers: Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to

80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with Roses

5.14 MR & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS strike plate and EACH 15 2650.00 39750.00

EP Cylinder for all flush doors.

Providing and fixing 600 mmx25 mm H Type handle for Doors approved make and designs as per

engineer in charge

Providing and fixing minimium 70-90 kg capacity flooor spring for Doors approved make and designs

as per engineer in charge

5.17 MR Providing and fixing Glass door lock approved make and designs as per engineer in charge EACH 15 1950.00 29250.00

5.18 MR Providing and fixing Glass Big -L approved make and designs as per engineer in charge each 6 2450.00 14700.00

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

5.2 13.83 Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including

applying additional coats wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile

Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less

than 50 grams/ litre

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give

an even shade :

13.99.1 One or more coats on old work. sq m 210 102.80 21588.00

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

BLINDS Providing & supplying of Window Blinds as per the approved sample in required shade

and style consisting, of ZEBRA BLINDS comprising of optima screen Fabric comprising of 22%

polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-

19/cm, having fire resistance standard – NFPA 701-89 small testing ISO- 5659-2 .Thetear resistance

should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch

for quick, easy and safe installation, moulded plastic with steel spring support and inserted into the

tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side

or left hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in

position upon release of the ball chain by means of a built in friction lock.Universal clutch for left

and right hand operation.Chain Gear Ratio of 1.75:1. The END PLUG shall be molded of plastic witha

steel location pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for ease

of installation. The SUPPORT BRACKETS shall be of coated steel & provided with covers and used in

right hand or left hand positions differentiated by the acceptance of the of the rectangular drive

unit support or the round idler plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame

(d) in Recess. The Bracket should be protruding outside maximum of

80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin

thickness of 1mm and shall incorporate a key way integral with the tube to accommodate the spline.

The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALL CHAIN shall be

2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form

an endless ball chain. It is used for raising or

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface as approval of

the Architect. (Only film surface area shall be measured and paid).

Providing & fixing Sidbi Signages & Logo & Sidbi Enviremoent Theme as per Direction of Engineer in

Providing & fixing Sidbi Sign Glow Board For Exterior Acrylic Base Embeded Letter as per design

(Front approx = 21 x 4)

Providing and fixing sandwich poster made of printed graphic mounted on required thickness

sunboard/ACP board, fixed directly on wall with SS decorative studs, complete with all necessary

hardware, fitting, and installation at site, as per approved design and direction of engineer-in-

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of G.I.

frame and required board, including providing and fixing of frame work made of special

section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm

and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with

dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal

5.32 9.105 screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel

and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of

studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal

screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both

side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the

spacing of 300 mm centre to centre.

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S.

fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at

the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws,

including jointing and finishing to a flush finish with recommended jointing compound, jointing

tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacture's specification and direction of engineer in charge

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced

Gypsum (GRG) plaster board conforming to IS: 2095:

Providing and fixing gypsum board vertical bend in required radius/shape using 12.5mm thick gypsum

5.33 board over GI framework (stud/channel), including cutting, bending, fixing, joint treatment with Rmtr 102 195.00 19890.00

tape and compound, finishing complete in all respect

Total Amount 1265598.57 3530840.63

Total Amount 1265598.57 3530840.63

Add labour cess @0.973 as per CPWD circular 1231427.41

Add CPWD cost index @103 on DSR civil 2023 1268370.23

Total Amount 1268370.23 3530840.63

Total Amount 1268370.23 3530840.63

Total Amount DSR & NDSR 4799210.86

Total Amount DSR & NDSR 4799210.86

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DESCRIPTION UNIT QUANTITY RATE

2025 DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface/ recessed medium class PVC

conduit, with modular switch, modular plate, suitable GI box and earthing the point

A.1 with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without

independent switch etc.) with1.5 sq.mm FRLS PVC insulated copper conductor single

A.2 core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq.

mm FRLS PVC insulated copper conductor single core cable for loop earthing as

Supplying and fixing following modular switch/socket on the existing modular plate &

switch box including connections but excluding modular plate etc. a srequired.

1.24.4 3 pin 5/6 amp socket outlet Each 90 136.00 12240.00

1.24.5 6 pin 15/16 amp socket outlet Each 30 219.00 6570.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover

plate on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Digitally signed by MANISH

S NO DESCRIPTION UNIT QUANTITY RATE

2025 DSR (INR)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes

1.14 of FR PVC insulated copper conductor, single core cable in surface/ recessed medium

class PVC conduit as required

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 30 482.00 14460.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper

C.1 MR conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-

1 respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 45 1300.00 58500.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 6 1800.00 10800.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature

2.10 circuit breaker suitable for inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,

MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/ RCCB/ Isolator)

Providing and fixing 400mm wall mounted oscillating fan, heavy-duty type, 230V, 50Hz,

single phase, with three-speed control regulator, complete with suitable mounting

brackets, clamps, bolts, nuts, and necessary wiring connections from the nearest point

using 1.5 sq.mm copper flexible wire, including testing and commissioning at site,

complete as required.( Make: Havells/Cromton/Usha/Bajaj asapproved by ingineer-in-

Digitally signed by MANISH

S NO DESCRIPTION UNIT QUANTITY RATE

2025 DSR (INR)

Supplying and fixing of following sizes medium class PVC conduit aong with accessories

1.21 in surface/ recess including cutting the wall and making good the same incase of

E.12 recessed conduit as required

Supplying and Installation of following size perforated of painting with powder coating

M.S. cable trays of perforation of not more than 17.5% in convinient sections, joined

with connectors suspended from the cieling with MS suspenders including bolts and nuts

painting suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 15 1243.00 18645.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories,

F.1 5.6 and providing masonry enclosure with cover plate having locking arrangement and SET 3 15004.00 45012.00

watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections

etc. As required.

Digitally signed by MANISH

S NO DESCRIPTION UNIT QUANTITY RATE

2025 DSR (INR)

Online UPS- Input supply: Three Phase, Output supply: Three Phase. Supplying,

installation, Testing & Commissioning of following capacity at full load (Unity Power

at operating temperature 0 to 40 0C, Relative humidity 0 to 95%, Online double

conversion true sine wave Uninterrupted hot swapable (allow for the replacement or

addition of battery modules without shutting down the entire system) modular Power

Supply (UPS) system with N+1 modules (N denotes total number of modules required for

rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30

minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS

rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container)

and Static Bypass switch along with provision for manual bypass, suitable

isolationtransformer for additional protection against neutral faults etc. UPS shall have

inbuilt phase sequence correction. The UPS systems offered are to be of the latest

technology with Digital Control Microprocessor based for 190 DELHI SCHEDULE OF

26.2.1 RATES (E&M)-2025reliable operation using Insulated Gate Bipolar Transistor (IGBT)'s Nos 3 208893.00 626679.00

both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The

quality of design, manufacturing and inspection process should confirm to the relevant

Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS

systems shall be >96% while operating on battery mode and delivering quality power to

the 100% non-linear loads. Current total harmonic effect(ITHD) on the input grid shall

be < 5% at 50 %load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be

included in UPS cost), extreme power factor kit to be included to limit the input power

factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall

be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7

leading power factor loads. UPS shall be suitable for incoming supply AC : 3Phase 400V

+/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload

capacity of 120% for 10 mins, Sine wave output. Non condensing, noise level less than

60db at 1 meter distance, protections: Input Under voltage over voltage, abnormal out

voltage, battery over charging, output over current, short circuit protection, battery

Providing & Fixing

deep discharge exhaust fan

protection, 10KVof approved make and size complete with frame,

surge. UPSarrangement, necessary

must comply with wiring connection from nearby point, screws,

low voltage Nos 6 2150.00 12900.00

electromagnetic compatibility (EMC)testing

cutting/fitting work and & commissioning

achieved as complete as required at site

Total of Electrical

per EN 6204, EN6204 Part I and Part 2, it shall be items 2078010.00 117750.00

a Voltage and Frequency IndependentTotal Amount

UPS. . Communication RS232/RS485/SNMP port DSR+NDSR 2195760.00

open protocol for BMS integration, all hardware & software for iOT Communication as

per approved by Engineering in charge. Required battery racks and interconnecting

copper conductor cables of suitable Digitally signed by MANISH

size and connectors and all required accessories are inclusive of the cost). This system PAREEK

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount

2025 Amount (A)

Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling /heating having 100% hermetically sealed

inverter type twin Rotary/Scroll Compressor(s),minimum two compressors (with individual separate PCB)

for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-

410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as required. To

have better efficiency condenser fan shall be capable to operate at different speed with respect to load.

The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications

and work even at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of

31.3 the rated capacity upto 39 Degree Celcius.The unit shall be suitable to work on 400V +/- 10%, 3 Phase,

50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The condenser should be coated with a hydrophilic film to prevent water

accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of

degradation, thereby improving overall performance and durability. The Indian Seasonal Energy Efficiency

Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as

below and complete as per CPWD specification, connections, inter connections etc. as required. (For

capacity <40 kWr ISEER 7.4, Capacity > 40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC

2.0 INDOOR UNIT

Supply, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette Type

Indoor ceiling mounted unit equipped with synthetic washable media pre- filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic

expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation, Corded remote

31.4 control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required.

The Indoor units must shut down upon receiving a singal from the BMS System/Fire Signals. The system

shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of indoor

unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same

Digitally signed by MANISH

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount

2025 Amount (A)

Supply, Installation, Testing and Commissioning of following minimum capacity High wall type Indoor

unit equipped with and comfort washable synthetic media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic

expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for

operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The Indoor units must shut

down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust air

flow as per room requirement automatically. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor)

REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings,

with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with

XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves

sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

3 31.14.1 6.4 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 180 256.00 46080.00

3.1 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 180 346.00 62280.00

3.2 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 120 487.00 58440.00

3.3 31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Rmt 90 615.00 55350.00

3.4 31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 60 739.00 44340.00

3.5 31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Rmt 45 1157.00 52065.00

3.6 31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Rmt 24 1286.00 30864.00

3.7 31.13.1 Indoor Units (y-joint) Each 18 4535.00 81630.00

4 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe, complete with fittings, supports, U trap

arrangement, Clean Plug with 6mm nitrile insulation and accessories as per specifications, drawings.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

5 10.16 etc.,including cutting, hoisting, fixing in position and applying a priming coat of approved steel

primer, including welding and bolted with special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes kg 150 194.40 29160.00

Supplying and fixing following rating, double pole,(single phase and neutral), 240 V, residual

current circuit breaker (RCCB), having a sensitivity current 30

mA in the existing MCB DB complete with connections, testing and commissioning etc. as

Digitally signed by MANISH

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount

2025 Amount (A)

Total Amount 2,228,455.00

Total Amount 2,228,455.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO Description UOM Qty Rate DSR Amount

A. 2025 UTP Components for Data

Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in

existing conduit/ on surface, U/FTP, LSZH, Non-

Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto

10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded

1 1.53 insulation

for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke

Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS.

Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been

tested and verified by UL/ ETL etc. complete as required.

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side.

Keystone Unshielded Outlet, 180DG C6, Blue

Supply, Installtion, Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side end

Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet

4 MR (I/O) to end user Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Blue, Nos. 60 420.00 25200.00

LSZH, C6, 2M (Blue)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet

5 MR (I/O) to Rack End Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, Nos. 60 420.00 25200.00

LSZH, C6, 2M (Yellow)

Supply, Installtion, Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for CAT6

cable termination at rack end. Data Active Redandant

Supply , Installtion , Testing and Comissioning of 2 Port British Style Shuttered Face Plate white for I/O fixing at

8 MR SITC of 04 core OM3 Multimode fiber orange color 50/125, minimum bending radius 15x OD RM 90 229.17 20625.00

SITC of 24U Floor Standing Network Rack, of suitable standard dimensions as per site and Engineer In

charge direction, complete with 19-inch mounting frame, minimum 24U usable height, front toughened

glass/acrylic lockable door, lockable rear door/panel, removable and lockable side panels, cable entry

9 MR provisions at top and bottom, adequate ventilation with provision for fan mounting, adjustable Each 3 25,000.00 75000.00

mounting rails, equipment mounting hardware, earthing provision, and all necessary accessories

including fixing hardware, cable management, and installation complete in all respects as required for

housing active and passive networking equipment, including testing and commissioning.

Supply, Installation, Testing & Commissioning of 24-Port Layer-2 Managed Gigabit Ethernet Switch

comprising 24 × 10/100/1000 Mbps RJ45 ports and 4 × Gigabit SFP uplink ports, switching capacity not

less than 56 Gbps, forwarding rate not less than 41.7 Mpps, supporting IEEE 802.3, 802.3u, 802.3ab,

10 MR VLAN (802.1Q), QoS, STP/RSTP/MSTP, IGMP Snooping, Link Aggregation (LACP), Port Mirroring, DHCP Nos 3 19,500.00 58500.00

Snooping, Access Control List (ACL), Jumbo Frames, rack-mountable, complete with power cord, rack

mounting accessories, configuration, testing and commissioning, suitable for structured cabling and LAN

Digitally signed by MANISH

Total Amount 207200.00 255921.00

Total Amount 207200.00 255921.00

Total Amount DSR & NDSR 463121.00

Total Amount DSR & NDSR 463121.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S No 2025/ DESCRIPTION QTY UNIT RATE

DSR (INR) NON-DSR

Providing, laying, testing & commissioning of 'C' class heavy duty

MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts

27.7 bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

1 suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required :

Providing, fixing, testing & commissioning of 15mm dia

27.21 quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories :

27.21.1 Pendant type 31 Each 599.00 18569.00

Supplying, fixing, testing and commissioning of butterfly valve of

PN 1.6 rating with bronze/gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS

13095 of following sizes as required :

Carefully Extending, lowering and repositioning the existing

sprinkler points from the existing fire fighting sprinkler piping

network to suit the revised false ceiling layout, including

providing and fixing required lengths of GI/MS sprinkler drop

4 MR pipes (up to 1.5 m average), fittings, socket, nipple, reducer, 3 Job 15000.00 45000.00

clamps, hangers, cutting and threading, refixing existing sprinkler

heads, alignment with ceiling tiles, testing, commissioning and

making the system operational complete as required and as

directed by Engineer-in-Charge.

Digitally signed by MANISH

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

(Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Providing and fixing ISI Marked of approved make Fire

6 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 3 NOS 12000.00 36000.00

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). 6 NOS 3870.00 23220.00

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683). 6 NOS 3000.00 18000.00

Total Amount 362600.00

Total Amount 362600.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - CCTV

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

A. CCTV DSR NDSR

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof Dome

camera with 2.8 to 12mm Motorised Lens,Smart IR, up to 30M IR distance,Up to 120

dB WDR (Wide Dynamic Range),3D DNR (Digital Noise Reduction),H.265+, H.265,

1 MR H.264, MJPEG,Corridor mode, Triple streams,3-Axis, IP67, IK10 Vandal

Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video Compression H.265+,

H.265, H.264, MJPEG,Behavior Detection Intrusion.

Supply, Installation, Testing & Commissioning of Linux-based Network Video Recorder

(NVR) for centralized monitoring, management and recording of IP cameras from the

Control Room, supporting minimum 08 IP camera channels, with minimum 256 Mbps

incoming bandwidth, H.265+/H.265/H.264 video compression, minimum 02 SATA

interfaces for HDD, minimum 16 alarm inputs and 04 alarm outputs, 1.5U, 19-inch

2 MR rack-mountable chassis, with HDMI/VGA video output, network interface and USB

ports, complete with compatible IP PTZ joystick controller for camera selection,

pan/tilt/zoom and focus control, power supply, required accessories, configuration,

installation, testing and commissioning, complete in all respects. HDD shall be

provided separately.

Supply, Installation, Testing & Commissioning of 4 TB Surveillance Grade SATA Hard

Disk Drive (HDD), 3.5-inch form factor, 7200/5400 RPM as per manufacturer design,

SATA III (6 Gb/s), specifically designed for 24×7 CCTV surveillance applications,

compatible with Network Video Recorder (NVR), complete with mounting, formatting,

configuration, testing and commissioning. Approved makes: Western Digital Purple,

Seagate SkyHawk, Toshiba S300 or equivalent.

Supply Installation Testing & Commissioning of “24-inch or higher Full HD LED

Monitor, minimum resolution 1920 × 1080, LED-backlit display, 16:9 aspect ratio,

minimum brightness 250 nits, minimum contrast ratio 1000:1, response time ≤5 ms,

4 MR refresh rate ≥60 Hz, with HDMI and VGA or equivalent digital/analog input interfaces, Nos. 3 15000.00 45000.00

complete with compatible wall-mount bracket/clamps and desk-mounting stand,

power/data cables and all necessary accessories for installation, testing and

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 3 3500.00 10500.00

Digitally signed by MANISH

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

Supply, Installation, Testing & Commissioning of 8-Port Gigabit Managed PoE Switch

comprising 8 × 10/100/1000 Mbps RJ45 PoE ports conforming to IEEE 802.3af/at

standards, with minimum 120 W total PoE power budget, and 2 × Gigabit SFP/RJ45

uplink ports, switching capacity minimum 20 Gbps, forwarding rate minimum 14.8

6 MR Mpps, supporting VLAN, QoS, STP/RSTP, IGMP Snooping, port isolation and surge

protection, rack/wall mountable, complete with power cord, mounting accessories,

configuration, testing and commissioning, suitable for IP CCTV applications, complete

in all respects.

Total : A - CCTV 0.00 263100.00

Total Amount 0.00 263100.00

Total Amount 0.00 263100.00

Total Amount DSR & NDSR 263100.00

Total Amount DSR & NDSR 263100.00

Digitally signed by MANISH

FIRE ALARM SYSTEM WORKS

S.NO. DESCRIPTION UNIT Qty RATE Amount

INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning sector panel suitable for following zones,

complete with visual indications for short circuit fault, open circuit fault, fire condition and

all other standard facilities as per IS:2189 with mimic diagram

for all area/zone covered, complete with all connections, interconnections as required.

Supplying, installation, testing & commissioning of smoke detector with built in LED and

Mounting base complete withb all Connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in

28.1.3 Surface/ Recess with Stainless Steel chain & hammer Assembly complete with glass and Each 6 513.00 3078.00

push button etc. as Required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed

MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of Fire alarm Sounder with Facility to make

e) 28.1.6 annoucement, mountedc in M.S Box (16 SWG) with Hinged cover plate & Suitable for Each 6 600.00 3600.00

operation with Amplifier i/c line matching transformer etc complete as required .

Supply, Installation, Testing & Commissioning of LED Exit Signage, Single Side, 3W–5W, wall

f) MR mounted, 230V AC, inbuilt Li-ion/Ni-Cd battery backup (minimum 180 minutes), complete Each 14 2750.00 38500

with fixing accessories and connection from nearest lighting point

CABLING & WIRING

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having

XLPE insulation, steel wire armouring & FRLS/HFFR outer

sheath complete as required.

Total Amount 180616.00 38500.00

Total Amount 180616.00 38500.00

Total Amount DSR & NDSR 219116.00

Total Amount DSR & NDSR 219116.00

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table

1 BO Incharge Table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module

fliptop box for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Supplying and placing in position of Back Storage as per photograph/drawing .The back storage shall be

made out of 25mm thick pre -laminated particle board of approved shade. The working and non working

2 Back Storage Nos 3 23500.00 70500.00

edges shall be finished with machine pressed with 2mm PVC egdge banding. Back Storage Dimension

Supplying and placing in position of 360 degrees revolving high back chai. The chair of Size :-(W)590mm X

(D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design

made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut

3 foam. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall Nos 3 10500.00 31500.00

be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome

base with nylon castors . Chair seat has foam of density 30- 35 (+/ 2kg /m3) Dimensions The backrest has

a foam of 28kg/m3.

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium Leatherette, Colour

BO Visitor Back & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever,

Chair Base:Cantilever Frame, Base Type: Cantilever, Maximum Seating Height:19".The Seat & back are made up

of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class to the soft

cushioned backrest and seating. Material & subtype:Premium Leatherette, Colour & Colour Family:as per

requirement, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern,

2 seater sofa BO Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat cushion is

Cabin/ Reception made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic

webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of

28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater Dimension(L)1390mm X (D)750mm X

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table

1 BO Incharge Table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module

fliptop box for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Providing, supplying and placing in position 3-Seater Sofa, modern design, overall size approximately 2000

mm (L) × 750 mm (D) × 710 mm (H) with seating height approximately 410 mm, having frame made of

seasoned Steam Beech solid wood, upholstered with premium-quality Leatherette of approved colour, shade

and texture. Seat cushion shall comprise multi-layered foam of density 32–35 kg/m³ with 2.75" and 1.75"

3 seater sofa BO

6 elastic webbing support, and backrest shall comprise 28 kg/m³ foam with 200 GSM polyester polyfill. Nos 3 42000.00 126000.00

Cabin/ Reception

Upholstery shall be stitched using bonded nylon thread and provided with stainless steel legs in matte finish.

The sofa shall be complete in all respects including all materials, hardware, fixing accessories, transportation,

loading/unloading and placement at site, as per approved sample/design and instructions of Engineer-in-

BO Cabin/ Supplying, and placing in position of Cofee/ Corner Table as per approved design Dimension(L)450mm X

7 Reception Corner/ (D)450mm X (H)450mm Nos 6 8000.00 48000.00

Supplying, and placing in position of Centre Table as per approved design Dimension(L)1150mm X

8 Centre Table Nos 3 16500.00 49500.00

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table

9 shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 38790.00 116370.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module

fliptop box for wire passing or as per site requirement. Main Table Dimension (L)1500mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Supplying and placing in position of 360 degrees revolving high back chai. The chair of Size :-(W)590mm X

(D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design

made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut

10 AGM Chair foam. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall Nos 3 10500.00 31500.00

be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome

base with nylon castors . Chair seat has foam of density 30- 35 (+/ 2kg /m3) Dimensions The backrest has

a foam of 28kg/m3.

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table

1 BO Incharge Table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module

fliptop box for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium Leatherette, Colour

AGM Visitor Back & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever,

Chair Base:Cantilever Frame, Base Type: Cantilever, Maximum Seating Height:19".The Seat & back are made up

of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

Supplying and placing in position of Back Storage as per photograph/drawing .The back storage shall be

made out of 25mm thick pre -laminated particle board of approved shade. The working and non working

12 Back Storage Nos 6 23500.00 141000.00

edges shall be finished with machine pressed with 2mm PVC egdge banding. Back Storage Dimension

Supplying and placing in position of conference table of required size as per image/ Layout drawing. The

work surface top should be of thickness 42mm top prelaminated particle board with 2mm thick PVC edge

banding. The side panel are made up of 36mm thick prelaminated particle & modesty panel are made out of

13 Conference Table Nos 3 48500.00 145500.00

25mm thick prelaminated particle board with 2mm thick PVC edge banding. The wire carrier should be made

from 0.6mm thick CRCA & powder coated 40-50 microns. Also having a provision of 6 module flip top box &

metal raceway for wire flow.

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x

1315mm(H). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam.

The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with

Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking

14 mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The Nos 3 10500.00 31500.00

pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with

polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

adjustable arm rest and head rest

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-

(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar

back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with

Medium Back chair

15 leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which shall have Nos 24 9500.00 228000.00

stroke of 10.0 +/-

0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/- 2kg /m3) The

backrest has a foam of 28kg/m3.

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table

1 BO Incharge Table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module

fliptop box for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) Supplying, and placing in position of linear workstation

as per Image.The worktop made out of 25mm thk. Prelam Particle board with 2 mm thk PVC edge

banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm

Horizontal connectors with Powder coting of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both

side of the "T" leg for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal

powder coated raceway with Powder coting of 50 Micron below top for wiring.Vertical wire carrying pole with

Linear powder coating 50 micron below top for wiring( Non- sharing workstation ). Also having a provision of ms

Workstation perfoated sheet hanging modesty. provision of glass divider rest on the "D" brackets on the table top

between opposite seatings. All working or non working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Provision of pullout PVC keyboard tray and

CPU trolley for each seating.

Also a provision of Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer &

one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with

provision of handles & Locking arrangement

Providing and fixing printer table of size 1500 mm × 750 mm (5' × 2.5') made from 18 mm thick pre-

laminated particle board (both side laminated) of approved shade and make, including top, sides, modesty

17 Printer Table panel, shelves as required, edge banding with 2 mm PVC edge tape on exposed edges, necessary screws, Nos 3 11500.00 34500.00

fittings, hardware, level adjustment arrangement, labour, handling, transportation and complete installation

as per approved design and direction of Engineer-in-Charge.

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table

1 BO Incharge Table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module

fliptop box for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation With Side Top with

3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition Ht. 1200mm, Double

Raceway systems Skirting label and below the table top . lower tile both side laminated and upper tile inside

18 side fabric, White Board and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Gabel Nos 12 38000.00 456000.00

end 18mm thick MDF board., and 3Drawer top supported Pedestal unit Size 400W x 400D x 725H made

in 18mm thick..Complete Made in MDF Board.. Laminate 1- Frosty White, Laminate2 For drawer Facia-

Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating- Munshel Gray. and White Tinted Glass

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-

Medium Back chair (W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar

Workstation/ back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with

Reception/ leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which shall have

Meeting room stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35

(+/- 2kg /m3) The backrest has a foam of 28kg/m3.

Providing & Installation of Pantry table of size 1.2m x 0.75m x 1.05m (ht) made out of 19mm thk.

Commercial Board finished in Recon veneer and DU Pont Coreanof approved shade as per design. The Recon

20 Pantry Table Nos 3 24500.00 73500.00

surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to be provided above table. One

(1) number Drawer pedestal with 3 drawers to be provided under the table.

Providing & Installation of Reception table of size .75Dia X 0.75m (ht) made out of 19mm thk. Commercial

Board finished in Recon veneer and DU Pont Coreanof approved shade as per design. The Recon surfaces to

21 Reception Table Nos 3 26500.00 79500.00

be white Duco painted. A glass top od width 0.2m on SS pegs to be provided above table. One (1) number

Drawer pedestal with 3 drawers to be provided under the table.

22 Pantry chairs Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC Nos 12 3700.00 44400.00

The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel is made of

Openable Shutter 09mm thick MDF of approved shade. All the edges of storage surface shall be provided with machine

storage pressed imported PVC lipping glued with hot melt EVA glue free from any VOC with free groove handle and

suitable lock. All exposed area PVC edge lipping

Size as decided by site engineer/Bank Sqm 24 18500.00 444000.00

Pantry Under Pantry Under Counter Storage, made with HDHMR board finished with laminate on all exposed surfaces. Unit

24 Counter depth: 600mm. All edges shall be finished with matching edge banding. Includes shutters, shelves, hardware Sqm 6 11500.00 69000.00

Storage (hinges, handles), and necessary fittings complete in all respects.

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table

1 BO Incharge Table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all storage to be

made out of 18mm thick pre laminated particle board. Provision of Junction box, wire raceway and 6 module

fliptop box for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D) 900mm X

(H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Pantry/ Pantry Overhead Storage Unit, made from HDHMR board of approved shade and grade conforming to E1

Workstation norms, with unit depth of 400mm. All exposed edges finished with 2mm PVC edge banding using hotmelt EVA

Overhead glue. Includes shutters, shelves, and necessary hardware and fittings, complete in all respects.

3 Drawer top supported pedestal unit size 400W X 400D X 725 H made in 18mm thick complete made in

26 Mobile Vanity MDF board. Nos 6 8800.00 52800.00

Total Amount for Furniture 3446070.00

Total Amount for Furniture 3446070.00

Digitally signed by MANISH

S.No Description Unit Qty. Rate Amount

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, Installation, Testing & Commissioning of

LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic

diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC

140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open

circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below

5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life

ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures

Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5

sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED

fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder

coated die cast /Extruded aluminium Body including trim

LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2

ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV

with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker

should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen

maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3,

2 8.8 Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external

connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for

LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement.

(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder

coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Total Cost of Light items 324155.00

Digitally signed by MANISH

BOQ FOR THE INTERIOR FIT OUT WORKS OF 3 NOS. SIDBI EBOs (LADAKH EBO, AMRITSAR EBO, KASHIPUR

Total Amount DSR &

Total Amount DSR &

Sr.No Description DSR Amount Non- DSR Amount

Total (DSR +MR) BOQ Amount 6,042,958.00

Total cost (i/c GST) 6,042,958.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - CIVIL WORKS

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

CIVIL & INTERIOR WORKS

Dismantling tile work in floors , Wall and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 6 113.55 681.30

Demolishing brick work manually / by mechanical means including stacking of serviceable

1.2 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-Charge.

15.7.4 In cement mortar Cum 3 2060.20 6180.60

1.3 1.1 Carriage of material by mechanical transport including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)

2.1 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 6 614.20 3685.20

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of

2.5 13.4 12 mm cement plaster of mix

13.4.1 1:4 (1 cement: 4 coarse sand) SQM 15 357.35 5360.25

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP

2.6 MR Punning over cement plaster in line & plumb finished smooth to receive paint. (Internal SQM 150 301.33 45198.93

surfaces of walls).

3 FALSE CEILING WORKS

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20

mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs

at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm

at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all

as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the

cost of painting with

12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

Providing & fixing of Silhoutee Frame ceiling tile in size 600x600x15mm having noise reduction co-

efficient of 0.7, Density of 100 kg / m3, and Humidity resistance of 95% to be laid on exposed grid

system with white wrap comprising main runner 3.00 mm x 24mm web height cross tee 1.2 mtrs x 24

mm web height and 0.6 mtrs x 24 mm web height. The wall angle shall be 3.0 mtrs.

4 PARTITIONS AND WALL CLADDING

WALL PARTITION-Providing and fixing partition upto ceiling height consisting of Aluminium

frame and required board, frame work made of Aluminium section made of 50x25 mm , consisting

of floor and ceiling channel 50mm wide having equal flanges of 25 mm and 0.50 mm thick, fixed to

the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia

meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs

48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by

6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall

4.01 MR with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to

centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor

and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width

(0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two

boards, fixed to the studs using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at

corners (25 mm x 25 mm x 0.5 mm), joint finisher as per manufacture's specification and direction of

engineer in charge all complete.

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Both side 12 mm thick HDHMR board to IS: 5509 sq m 45 3450.00 155250.00

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing Plywood

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring

5.04 21.18 type fixing arrangement and making necessary holes etc. for fixing required door fittings, all sq m 10.5 5325.90 55921.95

complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid

Providing and fixing partition comprising 12 mm thick clear toughened safety glass of approved make

conforming to IS 2553 (Part-I) and IS 14900, fixed in anodized aluminium U-channels of approved size

and section at top, bottom and sides as required. The work shall include machine polished exposed

edges of glass, neoprene packing, EPDM gaskets, silicone sealant, aluminium channels, screws,

fasteners, anchoring arrangements, cutting, handling, transportation, installation, cleaning and all

incidental works complete as per approved drawings and direction of Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

5.05 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length

(hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood cum 0.30 142949.70 42884.91

Providing and fixing partition top beading 80x12 mm, including cutting, shaping, adhesive/fastener

5.06 MR fixing, edge finishing, surface preparation, and applying polish with matching finish, complete in all RM 15 355.00 5325.00

respects as per site requirement and engineer-in-charge directions.

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to

IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to

wall wirh screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete

as per directions of Engineer-in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative

type, core of block board construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sq m 12 2392.65 28711.80

Providing and applying panelling/partition with matching colour groove finish and polishing, including

all materials, labour, surface preparation, fixing accessories, edge finishing, sanding, colour

matching, groove cutting, polishing coats, and complete finishing as per site requirement and

engineer-in-charge directions.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic AC 10 as

per IS : 1868 ), transparent or dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with

necessary screws, etc. complete.

Door Closers: Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to

80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with Roses

5.14 MR & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS strike plate and EACH 6 2650.00 15900.00

EP Cylinder for all flush doors.

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Providing and fixing 600 mmx25 mm H Type handle for Doors approved make and designs as per

engineer in charge

Providing and fixing minimium 70-90 kg capacity flooor spring for Doors approved make and designs

as per engineer in charge

5.17 MR Providing and fixing Glass door lock approved make and designs as per engineer in charge EACH 6 1950.00 11700.00

5.18 MR Providing and fixing Glass Big -L approved make and designs as per engineer in charge each 6 2450.00 14700.00

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

5.2 13.83 Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including

applying additional coats wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile

Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less

than 50 grams/ litre

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give

an even shade :

13.99.1 One or more coats on old work. sq m 105 102.80 10794.00

BLINDS Providing & supplying of Window Blinds as per the approved sample in required shade

and style consisting, of ZEBRA BLINDS comprising of optima screen Fabric comprising of 22%

polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness 0.67 mm, Yarn count 18-

19/cm, having fire resistance standard – NFPA 701-89 small testing ISO- 5659-2 .Thetear resistance

should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch

for quick, easy and safe installation, moulded plastic with steel spring support and inserted into the

tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side

or left hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in

position upon release of the ball chain by means of a built in friction lock.Universal clutch for left

and right hand operation.Chain Gear Ratio of 1.75:1. The END PLUG shall be molded of plastic witha

steel location pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for ease

of installation. The SUPPORT BRACKETS shall be of coated steel & provided with covers and used in

right hand or left hand positions differentiated by the acceptance of the of the rectangular drive

unit support or the round idler plug pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame

(d) in Recess. The Bracket should be protruding outside maximum of

80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin

thickness of 1mm and shall incorporate a key way integral with the tube to accommodate the spline.

The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALL CHAIN shall be

2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form

an endless ball chain. It is used for raising or

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface as approval of

the Architect. (Only film surface area shall be measured and paid).

Providing & fixing Sidbi Signages & Logo & Sidbi Enviremoent Theme as per Direction of Engineer in

5.29 MR Providing . & fixing Sidbi Sign Glow Board For Exterior Acrylic Base Embeded Letter as per design. Sft 60 1350.00 81000.00

Digitally signed by MANISH

S NO DSR/MR DESCRIPTION UNIT QUANTITY RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Providing and fixing sandwich poster made of printed graphic mounted on required thickness

sunboard/ACP board, fixed directly on wall with SS decorative studs, complete with all necessary

hardware, fitting, and installation at site, as per approved design and direction of engineer-in-

Total Amount 506740.41 885284.42

Total Amount 506740.41 885284.42

Add labour cess @0.973 as per CPWD circular 493058.42

Add CPWD cost index @103 on DSR civil 2023 507850.17

Total Amount 507850.17 885284.42

Total Amount 507850.17 885284.42

Total Amount DSR & NDSR 1393134.60

Total Amount DSR & NDSR 1393134.60

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DESCRIPTION UNIT QUANTITY RATE

2025 DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable

in surface/ recessed medium class PVC conduit, with modular switch,

modular plate, suitable GI box and earthing the point with 1.5

A.1 sq.mm. FRLS PVC insulated copper conductor single core cable etc as

Wiring for group controlled (looped) light point/ fan point/call bell

point (without independent switch etc.) with1.5 sq.mm FRLS PVC

1.55 insulated copper conductor single core cable in surface / recessed

A.2 PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium

class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/socket on the existing

1.24 modular plate & switch box including connections but excluding

modular plate etc. a srequired.

1.24.4 3 pin 5/6 amp socket outlet Each 26 136.00 3536.00

1.24.5 6 pin 15/16 amp socket outlet Each 15 219.00 3285.00

Supplying and fixing modular blanking plate on the existing modular

plate & switch box excluding modular plate as required.

Digitally signed by MANISH

S NO DESCRIPTION UNIT QUANTITY RATE

2025 DSR (INR)

Supplying and fixing following size/module, GI box along with Modular

base & cover plate on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the

1.14 following sizes of FR PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 250 267.00 66750.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 12 482.00 5784.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE

insulated Copper conductor armoured cable of 1.1 KV grade

conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI

(a) 4 C x 16 Sqmm XLPE copper cable RM 40 1300.00 52000.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 5 1800.00 9000.00

Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"

curve, miniature circuit breaker suitable for inductive load of

D.2 following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in

2.13 the existing MCB DB complete with connections, testing and

D.3 commissioning etc. as required.

Digitally signed by MANISH

S NO DESCRIPTION UNIT QUANTITY RATE

D.3 NON-DSR (INR)

2025 DSR (INR)

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on

2.4 surface/recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/ RCCB/ Isolator)

Providing and fixing 400mm wall mounted oscillating fan, heavy-duty

type, 230V, 50Hz, single phase, with three-speed control regulator,

complete with suitable mounting brackets, clamps, bolts, nuts, and

MR necessary wiring connections from the nearest point using 1.5 sq.mm Each 6 3950.00 23700.00

copper flexible wire, including testing and commissioning at site,

complete as required.( Make: Havells/Cromton/Usha/Bajaj

asapproved by ingineer-in-charge)

Supplying and fixing of following sizes medium class PVC conduit aong

1.21 with accessories in surface/ recess including cutting the wall and

E.12 making good the same incase of recessed conduit as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in

recess for connections etc. As required.

Digitally signed by MANISH

S NO DESCRIPTION UNIT QUANTITY RATE

2025 DSR (INR)

Online UPS - Input supply: Single Phase, Output

Supply: Single Phase.

Supplying, installation, Testing & Commissioning of following capacity

at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply

(UPS) system suitable for Single Phase input, Single Phase output AC

Supply. The UPS shall include a Rectifier, inverter, battery bank

suitable for 30

minutes back up (Battery VAH capacity shall not be

less than 1600 VAH per KVA of UPS rating per Hour

backup time) on full load (Battery shall be VRLA, SMF in ABS

Container) and Static Bypass switch along with provision for manual

bypass, suitable isolation transformer for additional protection

against neutral faults etc. The UPS systems shall be Microprocessor

based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s

1 26.2.1 both for

the rectifier & inverter with PWM (Pulse Width Modulation)

Technology. The quality of design, manufacturing

and inspection process should confirm to the relevant Inter-national

standards such as IEC/EN/VDE. The operating efficiency of the UPS

systems shall be >95% at 100% non-linear loads. Current total

harmonic distortion(ITHD)/ total demand distortion (TDD) on the

input grid shall be < 5% at 100 %load. (The required LC filters shall

be included in UPS cost), extreme power factor kit to be include to

limit the input pf to 0.99 and output power

factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 )

however UPS shall be suitable to take load at 0.7 laging to 0.7 leading

power factor loads. UPS shall be suitable for incoming supply AC

single phase 160-270V 50 Hz and delivering output AC supply true

sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload

capacity of 120% for 10 mins and 150% for 1 minute. Operating Each 3 109793.00 329379.00

temperature 0 to 40 0C, Relative humidity 0-95% non condensing,

noise level less than 60db at 1 meter distance, Protection for Under

voltage, over voltage, abnormal output voltage, battery over

charging, output over current, short circuit, battery deep discharge ,

10 KV surge. Display for watt/VA,Amp and Voltage power parameters

Digitally signed by MANISH

S NO DESCRIPTION UNIT QUANTITY RATE

2025 DSR (INR)

Providing & Fixing exhaust fan of approved make and size complete

with frame, mounting arrangement, necessary wiring connection from

nearby point, screws, fasteners, cutting/fitting work and testing &

commissioning complete as required at site

Total of Electrical items 728904.00 420529.00

Total Amount 728904.00 420529.00

Total Amount 728904.00 420529.00

Total DSR+NDSR 1149433.00

Digitally signed by MANISH

S.No Description Unit Quantity Rate DSR Amount MR Amount

Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor

unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric

nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain

pipe R-32/R-410/ R407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low &

high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of

following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto

42 Degree Celsius. Min 5 year

1 32.2 Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply :

Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electro technical Commission (IEC)

60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per

specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient

a 32.2.2 1.0 TR with 5 Star BEE Rating Each 3 40580.00 121740.00

b 32.2.3 1.5 TR with 5 Star BEE Rating Each 6 43539.00 261234.00

c 32.2.4 2.0 TR with 5 Star BEE Rating Each 3 57396.00 172188.00

Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal

sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable

ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with

Class-O closed cell elastometric nitrile

rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as

per specifications etc. as required :

a 31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 40 256.00 10240.00

b 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 130 346.00 44980.00

c 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 170 487.00 82790.00

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2

Providing, laying, testing and commissioning of additional condensate drain piping in 25 mm dia uPVC pipe, including

all required uPVC fittings such as bends, sockets, tees, reducers, U-trap and clean-out arrangement, clamps, supports,

3 MR connection to nearest suitable drainage point, 6 mm thick insulation wherever required, cutting and making good of Meter 148.12 202.00 29920.00

surfaces, testing for proper flow and leakage and all other materials, labour, tools and accessories, complete as

required and as directed by Engineer-in-Charge.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive

load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.10.3 Double pole Each 9 696.00 6264.00

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker

7 2.14 (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/

recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

2.3.1 6 way , Double door Each 3 2390.00 7170.00

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,including cutting, hoisting,

9 10.16 fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special

shaped washers etc. complete.

10.16.1 Hot finished welded type tubes kg 120 194.40 23328.00

Total Amount (DSR+MR) 792,814.00 29920.00

Total Amount (DSR+MR) 792,814.00 29920.00

Total Amount 822,734.00

Total Amount 822,734.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO Description UOM Qty Rate DSR Amount

A. 2025 UTP Components for Data

Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in

existing conduit/ on surface, U/FTP, LSZH, Non-

Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto

10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded

1 1.53 insulation

for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke

Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS.

Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been

tested and verified by UL/ ETL etc. complete as required.

1.53 1 Run Of Cable METRE 1000 74.00 74000.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side.

Keystone Unshielded Outlet, 180DG C6, Blue

Supply, Installtion, Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side end

Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet

4 MR (I/O) to end user Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Blue, Nos. 30 420.00 12600.00

LSZH, C6, 2M (Blue)

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information outlet

5 MR (I/O) to Rack End Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Yellow, Nos. 30 420.00 12600.00

LSZH, C6, 2M (Yellow)

Supply, Installtion, Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for CAT6

cable termination at rack end. Data Active Redandant

Supply , Installtion , Testing and Comissioning of 2 Port British Style Shuttered Face Plate white for I/O fixing at

8 MR SITC of 04 core OM3 Multimode fiber orange color 50/125, minimum bending radius 15x OD RM 40 229.17 9166.67

SITC of 24U Floor Standing Network Rack, of suitable standard dimensions as per site and Engineer In

charge direction, complete with 19-inch mounting frame, minimum 24U usable height, front toughened

glass/acrylic lockable door, lockable rear door/panel, removable and lockable side panels, cable entry

9 MR provisions at top and bottom, adequate ventilation with provision for fan mounting, adjustable Each 3 25,000.00 75000.00

mounting rails, equipment mounting hardware, earthing provision, and all necessary accessories

including fixing hardware, cable management, and installation complete in all respects as required for

housing active and passive networking equipment, including testing and commissioning.

Supply, Installation, Testing & Commissioning of 24-Port Layer-2 Managed Gigabit Ethernet Switch

comprising 24 × 10/100/1000 Mbps RJ45 ports and 4 × Gigabit SFP uplink ports, switching capacity not

less than 56 Gbps, forwarding rate not less than 41.7 Mpps, supporting IEEE 802.3, 802.3u, 802.3ab,

10 MR VLAN (802.1Q), QoS, STP/RSTP/MSTP, IGMP Snooping, Link Aggregation (LACP), Port Mirroring, DHCP Nos 3 19,500.00 58500.00

Snooping, Access Control List (ACL), Jumbo Frames, rack-mountable, complete with power cord, rack

mounting accessories, configuration, testing and commissioning, suitable for structured cabling and LAN

Digitally signed by MANISH

Total Amount 74000.00 206614.67

Total Amount 74000.00 206614.67

Total Amount DSR & NDSR 280614.67

Total Amount DSR & NDSR 280614.67

Digitally signed by MANISH

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S No 2025/ DESCRIPTION QTY UNIT RATE

DSR (INR) NON-DSR

Providing, laying, testing & commissioning of 'C' class heavy duty

MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts

27.7 bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

1 suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required :

Providing, fixing, testing & commissioning of 15mm dia

27.21 quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories :

27.21.1 Pendant type 15 Each 599.00 8985.00

Supplying, fixing, testing and commissioning of butterfly valve of

PN 1.6 rating with bronze/gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS

13095 of following sizes as required :

Carefully Extending, lowering and repositioning the existing

sprinkler points from the existing fire fighting sprinkler piping

network to suit the revised false ceiling layout, including

providing and fixing required lengths of GI/MS sprinkler drop

4 MR pipes (up to 1.5 m average), fittings, socket, nipple, reducer, 3 Job 11000.00 33000.00

clamps, hangers, cutting and threading, refixing existing sprinkler

heads, alignment with ceiling tiles, testing, commissioning and

making the system operational complete as required and as

directed by Engineer-in-Charge.

Digitally signed by MANISH

Providing and fixing ISI Marked of approved make Fire

5 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 3 NOS 12000.00 36000.00

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). 3 NOS 3870.00 11610.00

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683). 3 NOS 3000.00 9000.00

Total Amount 167974.00

Total Amount 167974.00

Digitally signed by MANISH

SCHEDULE OF QUANTITIES - CCTV

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

A. CCTV DSR NDSR

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof Dome

camera with 2.8 to 12mm Motorised Lens,Smart IR, up to 30M IR distance,Up to 120

dB WDR (Wide Dynamic Range),3D DNR (Digital Noise Reduction),H.265+, H.265,

1 MR H.264, MJPEG,Corridor mode, Triple streams,3-Axis, IP67, IK10 Vandal

Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video Compression H.265+,

H.265, H.264, MJPEG,Behavior Detection Intrusion,

Supply, Installation, Testing & Commissioning of Linux-based Network Video Recorder

(NVR) for centralized monitoring, management and recording of IP cameras from the

Control Room, supporting minimum 08 IP camera channels, with minimum 256 Mbps

incoming bandwidth, H.265+/H.265/H.264 video compression, minimum 02 SATA

interfaces for HDD, minimum 16 alarm inputs and 04 alarm outputs, 1.5U, 19-inch

2 MR rack-mountable chassis, with HDMI/VGA video output, network interface and USB

ports, complete with compatible IP PTZ joystick controller for camera selection,

pan/tilt/zoom and focus control, power supply, required accessories, configuration,

installation, testing and commissioning, complete in all respects. HDD shall be

provided separately.

Supply, Installation, Testing & Commissioning of 4 TB Surveillance Grade SATA Hard

Disk Drive (HDD), 3.5-inch form factor, 7200/5400 RPM as per manufacturer design,

SATA III (6 Gb/s), specifically designed for 24×7 CCTV surveillance applications,

compatible with Network Video Recorder (NVR), complete with mounting, formatting,

configuration, testing and commissioning. Approved makes: Western Digital Purple,

Seagate SkyHawk, Toshiba S300 or equivalent.

Supply Installation Testing & Commissioning of 24 inch Full HD LED monitor

including wall mount brackets/ clamps/ desk mounting stand.

6 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 3 3500.00 10500.00

upply, Installation, Testing & Commissioning of 6-Port Gigabit Managed PoE Switch

comprising minimum 6 × 10/100/1000 Mbps RJ45 PoE ports conforming to IEEE

802.3af/at PoE standards, with minimum 90 W total PoE power budget, suitable for

7 MR simultaneous power and data transmission to IP CCTV cameras, supporting VLAN, Nos 3 6500.00 19500.00

QoS, STP/RSTP and IGMP Snooping, with suitable Gigabit uplink port(s), rack/wall-

mountable, complete with power supply, mounting accessories, configuration, testing

and commissioning, suitable for IP CCTV applications, complete in all respects.

Total : A - CCTV 0.00 215700.00

Total Amount 0.00 215700.00

Total Amount 0.00 215700.00

Total Amount DSR & NDSR 215700.00

Total Amount DSR & NDSR 215700.00

Digitally signed by MANISH

FIRE ALARM SYSTEM WORKS

S.NO. DESCRIPTION UNIT Qty RATE Amount

INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning sector panel suitable for following zones,

complete with visual indications for short circuit fault, open circuit fault, fire condition and

all other standard facilities as per IS:2189 with mimic diagram

for all area/zone covered, complete with all connections, interconnections as required.

Supplying, installation, testing & commissioning of smoke detector with built in LED and

Mounting base complete withb all Connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in

28.1.3 Surface/ Recess with Stainless Steel chain & hammer Assembly complete with glass and Each 3 513.00 1539.00

push button etc. as Required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed

MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of Fire alarm Sounder with Facility to make

e) 28.1.6 annoucement, mountedc in M.S Box (16 SWG) with Hinged cover plate & Suitable for Each 6 600.00 3600.00

operation with Amplifier i/c line matching transformer etc complete as required .

Supply, Installation, Testing & Commissioning of LED Exit Signage, Single Side, 3W–5W, wall

f) MR mounted, 230V AC, inbuilt Li-ion/Ni-Cd battery backup (minimum 180 minutes), complete Each 6 2750.00 16500

with fixing accessories and connection from nearest lighting point

CABLING & WIRING

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having

XLPE insulation, steel wire armouring & FRLS/HFFR outer

sheath complete as required.

Total Amount 132318.00 16500.00

Total Amount 132318.00 16500.00

Total Amount DSR & NDSR 148818.00

Total Amount DSR & NDSR 148818.00

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle BOard of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle BOard with 2mm thk pvc edge banding. The

1 table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle BOard and rest all storage to be

made out of 18mm thick pre laminated particle BOard. Provision of Junction BOx, wire raceway and 6

module fliptop BOx for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D)

900mm X (H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Supplying and placing in position of Back Storage as per photograph/drawing .The back storage shall be

made out of 25mm thick pre -laminated particle BOard of approved shade. The working and non working

2 Back Storage Nos 3 23500.00 70500.00

edges shall be finished with machine pressed with 2mm PVC egdge banding. Back Storage Dimension

Supplying and placing in position of 360 degrees revolving high back chai. The chair of Size :-(W)590mm X

(D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design

made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with leatheritte and cut

3 foam. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall Nos 3 10500.00 31500.00

be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome

base with nylon castors . Chair seat has foam of density 30- 35 (+/ 2kg /m3) Dimensions The backrest has

a foam of 28kg/m3.

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X (D)505mm X

(H)990mm.A contemporary design with an all black finish, . Material & subtype:Premium Leatherette, Colour

EBO Visitor Back & Colour Family:Black, Dimension(W)610mm X (D)505mm X (H)990mm, Back Type:Cantilever,

Chair Base:Cantilever Frame, Base Type: Cantilever, Maximum Seating Height:19".The Seat & back are made up

of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 32-35 kg/m3. The backrest has a foam of 28kg/m3.

Providing, supplying and placing in position 3-Seater Sofa, modern design, overall size approximately 2000

mm (L) × 750 mm (D) × 710 mm (H) with seating height approximately 410 mm, having frame made of

seasoned Steam Beech solid wood, upholstered with premium-quality Leatherette of approved colour, shade

and texture. Seat cushion shall comprise multi-layered foam of density 32–35 kg/m³ with 2.75" and 1.75"

3 seater sofa EBO

6 elastic webbing support, and backrest shall comprise 28 kg/m³ foam with 200 GSM polyester polyfill. Nos 3 42000.00 126000.00

Cabin/ Reception

Upholstery shall be stitched using BOnded nylon thread and provided with stainless steel legs in matte finish.

The sofa shall be complete in all respects including all materials, hardware, fixing accessories, transportation,

loading/unloading and placement at site, as per approved sample/design and instructions of Engineer-in-

EBO Cabin/ Supplying, and placing in position of Cofee/ Corner Table as per approved design Dimension(L)450mm X

7 Reception Corner/ (D)450mm X (H)450mm Nos 6 8000.00 48000.00

Supplying, and placing in position of Centre Table as per approved design Dimension(L)1150mm X

8 Centre Table Nos 3 16500.00 49500.00

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle BOard of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle BOard with 2mm thk pvc edge banding. The

1 table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle BOard and rest all storage to be

made out of 18mm thick pre laminated particle BOard. Provision of Junction BOx, wire raceway and 6

module fliptop BOx for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D)

900mm X (H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle BOard of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle BOard with 2mm thk pvc edge banding. The

9 Manager Table table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 38790.00 116370.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle BOard and rest all storage to be

made out of 18mm thick pre laminated particle BOard. Provision of Junction BOx, wire raceway and 6

module fliptop BOx for wire passing or as per site requirement. Main Table Dimension (L)1500mm X (D)

900mm X (H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) Supplying, and placing in position of linear workstation

as per Image.The worktop made out of 25mm thk. Prelam Particle BOard with 2 mm thk PVC edge

banding.The Table top supported on Mild Steel of size 50mm x50mm Slanted Leg and 50mm x 25mm

Horizontal connectors with Powder coting of 50 Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on BOth

side of the "T" leg for Vertical wire carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal

powder coated raceway with Powder coting of 50 Micron below top for wiring.Vertical wire carrying pole with

Linear powder coating 50 micron below top for wiring( Non- sharing workstation ). Also having a provision of ms

Workstation perfoated sheet hanging modesty. provision of glass divider rest on the "D" brackets on the table top

between opposite seatings. All working or non working edges shall be provided with machine pressed 2mm

thick PVC edging using special hot melt glue at hot temperature. Provision of pullout PVC keyBOard tray and

CPU trolley for each seating.

Also a provision of Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a combination of 2 drawer &

one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle BOard with

provision of handles & Locking arrangement

Providing and fixing printer table of size 1500 mm × 750 mm (5' × 2.5') made from 18 mm thick pre-

laminated particle BOard (BOth side laminated) of approved shade and make, including top, sides, modesty

17 Printer Table panel, shelves as required, edge banding with 2 mm PVC edge tape on exposed edges, necessary screws, Nos 3 11500.00 34500.00

fittings, hardware, level adjustment arrangement, laBOur, handling, transportation and complete installation

as per approved design and direction of Engineer-in-Charge.

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle BOard of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle BOard with 2mm thk pvc edge banding. The

1 table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle BOard and rest all storage to be

made out of 18mm thick pre laminated particle BOard. Provision of Junction BOx, wire raceway and 6

module fliptop BOx for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D)

900mm X (H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Dimesnion: 1500mm(L) x 1500mm(L) x 600mm(D) x 1200mm(H) Modular Workstation With Side Top with

3 drawer Pedestal Size 1500W x 600D x 750/1200H.Partition NI-60mm Partition Ht. 1200mm, Double

Raceway systems Skirting label and below the table top . lower tile BOth side laminated and upper tile inside

18 side fabric, White BOard and white Tinted Glass . With Side Top Size 900W x 400D x 750H 25mm thick Nos 6 38000.00 228000.00

Gabel end 18mm thick MDF BOard., and 3Drawer top supported Pedestal unit Size 400W x 400D x

725H made in 18mm thick..Complete Made in MDF BOard.. Laminate 1- Frosty White, Laminate2 For drawer

Facia-Honkong Blue, Fabric-F 161 Dolphin Blue, Powder Coating- Munshel Gray. and White Tinted Glass

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze chair of Size :-

Medium Back chair (W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar

Workstation/ back design made of 12mm thick BWR plywood (IS Grade - 303 for seat and back) upholstered with

Reception/ leatheritte and cut foam. The chair shall be provided with pneumatic height adjustment which shall have

Meeting room stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35

(+/- 2kg /m3) The backrest has a foam of 28kg/m3.

Providing & Installation of Pantry table of size 1.2m x 0.75m x 1.05m (ht) made out of 19mm thk.

Commercial BOard finished in Recon veneer and DU Pont Coreanof approved shade as per design. The

20 Pantry Table Nos 3 24500.00 73500.00

Recon surfaces to be white Duco painted. A glass top od width 0.2m on SS pegs to be provided aBOve table.

One (1) number Drawer pedestal with 3 drawers to be provided under the table.

Providing & Installation of Reception table of size .75Dia X 0.75m (ht) made out of 19mm thk. Commercial

BOard finished in Recon veneer and DU Pont Coreanof approved shade as per design. The Recon surfaces to

21 Reception Table Nos 3 26500.00 79500.00

be white Duco painted. A glass top od width 0.2m on SS pegs to be provided aBOve table. One (1) number

Drawer pedestal with 3 drawers to be provided under the table.

22 Pantry chairs Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC Nos 6 3700.00 22200.00

The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back panel is made of

Openable Shutter 09mm thick MDF of approved shade. All the edges of storage surface shall be provided with machine

storage pressed imported PVC lipping glued with hot melt EVA glue free from any VOC with free groove handle and

suitable lock. All exposed area PVC edge lipping

Size as decided by site engineer/Bank Sqm 15 18500.00 277500.00

Pantry Under Pantry Under Counter Storage, made with HDHMR BOard finished with laminate on all exposed surfaces. Unit

24 Counter depth: 600mm. All edges shall be finished with matching edge banding. Includes shutters, shelves, hardware Sqm 3 11500.00 34500.00

Storage (hinges, handles), and necessary fittings complete in all respects.

Digitally signed by MANISH

Sno. Item Specifications Unit Qty Rate Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall be made out of

25mm thick pre -laminated particle BOard of approved shade. The working and non working edges shall be

finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS

powder coated "C" shape leg of size 50mm x 50mm with connectors of size 40mm x 40mm. The front

modesty are made out of 18mm thick prelaminated particle BOard with 2mm thk pvc edge banding. The

1 table shall be provisioned with Side unit of overall size: 900mm(L) x 450mm(D) x 675mm(H) . Side storage Nos 3 45500.00 136500.00

having a provision for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle BOard and rest all storage to be

made out of 18mm thick pre laminated particle BOard. Provision of Junction BOx, wire raceway and 6

module fliptop BOx for wire passing or as per site requirement.Main Table Dimension (L)2100mm X (D)

900mm X (H)750mm overall Side Runer Dimension (L)900mm X (D) 400mm X (H) 675mm

Pantry/ Pantry Overhead Storage Unit, made from HDHMR BOard of approved shade and grade conforming to E1

Workstation norms, with unit depth of 400mm. All exposed edges finished with 2mm PVC edge banding using hotmelt EVA

Overhead glue. Includes shutters, shelves, and necessary hardware and fittings, complete in all respects.

3 Drawer top supported pedestal unit size 400W X 400D X 725 H made in 18mm thick complete made in

26 Mobile Vanity MDF BOard. Nos 3 8800.00 26400.00

Total Amount for Furniture 1717470.00

Total Amount for Furniture 1717470.00

Digitally signed by MANISH

S.No Description Unit Qty. Rate Amount

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, Installation, Testing & Commissioning of

LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic

diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC

140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open

circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below

5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life

ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures

Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5

sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED

fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder

coated die cast /Extruded aluminium Body including trim

LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2

ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV

with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker

should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen

maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3,

2 8.8 Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external

connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for

LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement.

(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder

coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Total Cost of Light items 147080.00

Digitally signed by MANISH