CERTAIN REPAIRS TO PATH, DRAINAGE, SECURITY FENCING AND APPLYING CBP OF SECURITY WALL AT INS SARDAR PATEL, MES COMPLEX UNDER GE NAVY PORBANDAR

Amount

Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete artilcles and precast concrete block walling etc complete all as specified and directed.

Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M & L for Walling Porbandar stone masonary in CM 1:6 brought to courses, complete all as specified & directed by Engr-in-charge.

M & L for Walling of Porbandar stone masonary well bounded and bedded in cement mortar 1:6 brought upto courses, except stone complete all as specified and directed.

M & L for Rendering 15mm thick on fair faces of Porbandar stone masonary surface in CM 1:4 complete all as specified and directed by Engr-in-charge.

M & L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white primer complete all as specified and directed.

M & L for Preparation of old plastered surfaces of walls and applying one coats of cement base paint complete all as specified and directed by Engineer in Charge.

M & L for Preparation of old treated steel surfaces of any description (steel gates, embedded angles etc), over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M & L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified.

Dismantling of post and struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground complete all as specified.

M & L for providing RCC type B-1 1:2:4 (20mm graded aggr.) in precast post fencing post straining or terminal post strut etc. for fencing average sectional area exc.100 sqcm but n exc 250 sqcm with or without chemfered angles and flat splayed rounded or meterd tops complete all as specified.

Dismantling of mild steel work of any description not otherwise provided for complete all as specified.

M & L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, Gates, Grating drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specifed and as directed by Engineer in Charge.

M & L for Cement concrete 1:3:6 type C-2 (40mm graded agg) in foundatin filling of post holes, grils, etc complete all as specifed and as directed by Engineer in Charge.

Dismantling of fencing wire mesh any type complete all as specified.

Fixing only Chain link fencing including line wires any mesh size any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specifed and as directed.

S & F of mild steel round bars 10mm dia, cut to length, hooking ends confirming to Fe-410-W (Gde E-250) quality - A or Fe 290 (Gde - E-165) complete all as specified.

S & F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing ortying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) as in repair complete all as specified and directed by Engineer in Charge.

Taking Down and Re-fixing in Existing Birbed Wire with Restraining, resecuring including making good staples etc complete all as specified.

S&F of Concertina Coil, punched tape 2.60 mm dia high tensile spring steel wire, dia of coil 610mm, when stretched the length shall be 6.00m in one coil, (weight of coil shall not less than 1.30kg/m) and tied to barbed wire with and including provision of steel clips @ 5 clips spiral in one row complete without coating and taking down old concertina coil complete all as specified.

Taking down existing Steel Gate of Size upto 3 Sqm each pannel and applying grasing, Oiling and alinging with necessary provitions of Cleats, incl Welding works with beading etc complete repair with workable condition and refixing with same position complete all as specified. Note :- Additional Providing steel sections shall be measured and paid under item No. 13.00.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, compound wall etc. laid dry beded in any mortor complete all as specified.

M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado /Pillars etc laid over CM 1:4, 15mm thick cement screed and jointed with grey cement slurry, and pointed with white cement with admixture ofpigment to match the shade ofgranite stone including grinding and polishing complete all as specified.

Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete including removing debries ouside MD land complete all as specified.

M & L for 50mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection,Floor topping etc , surfaces finished of concrete flooring with brooming complete all as spd u including provision of necessary construction joints filled with bitumen filler etc complete all as specified.

M & L for Cement Concrete 1:4 :8 type D-2 (40mm graded agg) in foundatin filling and mass concrete complete all as specified.

M & L for Sand filling under paver blocks for cushion complete all as specified.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement pigment to match, complete all as specified.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade, finished with grey cement and pigment, complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors etc complete all as specified.

Fixing only Interlocking tiles including filling with sand cushioning (whereever required) including levelled with existing tiled surfaces complete all as specified. Note :- Sand and PCC shall be paid and measured Separtely.

M & L for 100 mm thick cement concrete type B-2 (1:2:4) mix using 20 mm graded stone aggregate as in hard standing complete all as specified.

S & F of Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified.

Demolition of cement concrete reinforced in any position including cut of bars as required, complete all as specified.

M & L for precast RCC cover slab for drain in 1:2:4,Type B1 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified.

Supply only Chain link MS galvanised fencing any size or type complete all as specifed and as directed.

Takin down and Re-fixing in existing concertina coil with restraining, resecuring including making good staples etc complete all as specified.

AADESH CONSTRUCTION

OM ENTERPRISE

m/s prakash enterprise

Vastushilp Building Designer

BABUBHAI BHIMABHAI PANDAVADRA

JAY BHARAT METAL SUPPLIERS

K K Construction Co