WELCOME MAINT AND CERTAIN REPAIR TO CERTAIN BUILDINGS IN POCKET 3 AND 4 IN AGE B/R-I UNDER GE ROORKEE

Amount

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old unserviceable of any height complete all as specified and directed.

M & L for mild steel TMT bars 6 to 10 dia as in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kitchen slab,landing or in any position complete all as specifed and as directed.

M&L for providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form from all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc. complete all as specified and as directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc including all necessary scaffolding arrangments of any height complete all as directed.

M&L Rendering 5mm thick plastering in cement mortar (1:3) as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces (either surfaces) of wall and finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick rendering in cement mortar 1:4 on fair face of brick work/ concrete surfaces of wall with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separatly)

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface of wall by applying 1mm thick wall care putty and making the surface smooth and applying two coat of exterior weather coat using roller for painting complete all as specified & directed.

M&L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

M&L for prepration of new plaster surfaces of walls and applying two coats of oil bound distemper over a coat of white wash over a coat of 1 mm thick wall care putty complete all as specified and as directed.

M&L for prepration of old decorated surfaces of walls inluding cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment of walls by washing down and smoothing old surface of walls, prerparation of surface and applying two coats of interior oil bound distemper with smooth roller finish over 1 mm thick putty and a coat of primer, complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat distemper oil emulsion on walls complete by an authorised applicator complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply two coat distemper oil emulsion on walls complete by an authorised applicator complete all as specified and directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as apecified and directed.

M&L for 5mm thick PVC sheet fillet of width fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted ceiling surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any hieght complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MoD land complete all as specified and directed.

M & L for dark shade, double/ultra charged vitrified tiles, first quality, 8 to 10mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm and not exc 0.42 Sqm, in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding in cement mortar (1:6) complete all as specified and directed.

M & L for dark shade, double/ultra charged vitrified tiles, first quality 8 to 10mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm and not exc 0.42 Sqm, in vertical set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in cement mortar (1:6) complete all as specified and directed.

M & L for non skid coloured ceramic tiles, joint free, 1st & premium quality, Digital coloured ceramic tiles, 300mm x 300mm x 6-7 mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and directed.

M & L for non skid coloured ceramic tiles, joint free, 1st & premium quality, Digital coloured ceramic tiles, area of each tiles exc 0.11 Sqm but not exc 18 Sqm x 6-7 mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and directed.

M&L for non skid coloured ceramic tiles, 1st & premium quality, Digital coloured ceramic tiles, 600mm x 600mm x 7-8mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and directed.

M&L for non skid coloured ceramic tiles, 1st & premium quality, Digital coloured ceramic tiles, 600mm x 600mm x 7-8mm thick in vertical surfaces (including designed borders) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates).

M & L for glazed coloured ceramic tiles, 1st & premium quality, Digital coloured ceramic tiles, 600mm x 300mm or 450x300x 6-7mm thick in vertical surfaces (including designed borders) such as skirting and dados, set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates).

M & L HI-Gloss digital ceramic tiles tiles in vertical surface tile of size 600mm x 1200mm 8 to 10 thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laid in floors, aprons etc, laid, bedded and pointed in any mortar and and removing the rubbish outside MD land complete all as specified and directed.

M & L for machine cut kota stone slab flooring 18-20mm thick, over cement screed base laid 15 mm thick in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete all as specified and directed.

M & L for machine cut Kota stone slab flooring, 18-20 mm thick, in one piece as in vertical surfaces, skirting etc, set and jointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and pointed in colour cement to match including backing coat 10 mm in cement mortor (1:4) complete all as specified and directed.

M & L for Granite tiles (of any type and colour) , 20mm thick machine cut, set, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including screed bed in cement plaster 20 mm thick 1:4, as in kitchen platform, jamb/cill of window, ventilator, border, flooring and simillar work etc complete all as specified and directed.

Taking up or down 15mm bore GI tubing complete all as specified and directed

S & F steel water tubing of size 15mm bore, medium grade, galvanised iron with all fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces, fixed to wall and ceiling or laid in floors and making good disturbed surfaces to match the existing surfaces complete all as specified and directed.

Taking up or down 20mm bore GI tubing complete all as specified and directed

S & F steel water tubing of size 20 mm bore, medium grade, galvanised iron with all fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces, fixed to wall and ceiling or laid in floors and making good disturbed surfaces to match the existing surfaces complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth complete all as specified and directed.

S & F in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm), including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc and screwed with brass screws to sheesham wood plugs embedded in floor complete all as specified and directed.

S & F in repair wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc with silicone sealant complete all as specified and directed.

S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and directed.

S & F in repair 15 mm bore, fancy type, angle valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair 15 mm bore, fancy type, concealed stop cock (regular body) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F PVC connection, 15mm size, PTMT nuts of length 450 mm complete all as specified and directed.

S& F in repair water closet seat cover any coloured pattern with flat bottom ,soft closing and mild steel chromium plated or aluminium hinging devices complete all as specified and directed.

S & F in repair brass chromium plated, 15 mm bore, fancy type, sink cock( wall mounted) with 150mm long swell spout, wall flange and provision of WP connection, cast copper alloy with fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15 mm bore, fancy type, bib taps, short body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair for 15 mm bore, fancy type, wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator complete all as specified and directed.

S & F in repair 15 mm bore, fancy type, health faucet with SS hose (Including 1.2 mtr long CP flexible tube) complete all as specified and directed.

S & F in repair fancy type, CP, Towel Rail, 60 cm long complete all as specified and directed.

S & F in repair CP Towel Ring complete all as specified and directed.

S & F in repair CP, soap dish complete all as specified and directed.

S & F in repair CP toilet paper holder complete all as specified and directed.

S&F in repairs sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F 15 mm bore overhead shower 250 mm dia single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 381 mm long Square shape with wall flange complete all as specified and directed.

S & F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or cold unserviceable' with long screwed sunk and fly nuts complete all as specified and directed.

S&F in repairs for stainless steel peg set of size 38x460x2 mm thick complete all as specified and directed.

S & F as in repair ss grating round 125mm size of anti-clog, anti faul etc complete all as specified and directed.

S & F in repair brass chromium plated, fancy type, 15 mm bore basin mixture or sink (central hole or wall mounted) with 'U' shaped round casted spout with 3" long pipe connection with aerator complete all as specified and directed.

S & F in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Demolition of cement concrete in ground floor & paving, n. exc 15 cm thick (below or above GL), unreinforced complete all as specified and directed and removing debris outside MoD land complete all as specified and directed.

M & L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and directed.

M&L for providing cement concrete type B-1 (1:2:4) (20 mm graded aggregate) as in side of PCC tiles/ interlocking tiles, bed blocks for hold fast and similar works complete all as specified and as directed.

M&L for glazed/matt finish chequred cement concrete coloured tiles of area exc 0.09 Sqm but not exc 0.36 Sqm and 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) after and including 20 mm thick in cement plaster in CM (1:6) for fixing tiles complete all as specified and directed.

M&L rubber moulded glossy finished 60 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator including 25 mm thick compacted bed of coarse sand, filling the joints with fine sand etc all complete all as specified and directed.

S & F in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap, connector piece of CI pipe upto 'T'/ 'Y' joint and connection to trap and to flushing pipe, anti-syphonage pipe etc and provision of lime concrete bedding complete all as specified and directed.

Taking down Chowkhats or frame with shutter (Without taking off shutter from the frame) not exc 1.5 Sqm eah including necessary cutting holes and making ggods using PCC (1:2:4) type B-0 complete all as specified and directed.

M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

S & F sheet glass, ordinary quality, 5.5 mm thick and glazed with oil putty or fixed with rubber beading, in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F of aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S & F in repairs of aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S & F powder coated anodised aluminium grill of 50x50x5 mm size of approved design/pattern with approved section and fixed to the existing window with stainless steell screws @ 200 mm C/C including the grill for operatiing handles and fixing complete all as specified and directed.

S & F in repairs Stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600mm including all fixing screws, rack hooks, etc and attachments, design of plate rack to be approved by the Engineer-In-Charge complete all as specified and directed.

M&L for taking down and resecuring or easing & adjusting, shutters of any description, exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed. Note :-Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.

Taking down Chowkhats or frames, exc 1.50 sqm but n exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkhats or frames n.exc 1.50 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc. 1.00 sqm but n.exc. 2.00 sqm each complete all as specified and directed.

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100mmx50mm size, applying PVC solvent cement and screwed with full body threaded, star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold unserviceable fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

Ditto all as per item No 83 but size 125x65mm

Ditto all as per item No 83 but size 45x70mm

S & F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S & F factory made 40mm thick flush door shutter, solid core construction with block board core and ply wood face panels, both side covered with decorative face laminate incl 5mm thick teakwood lipping alround with centrally locking arrangement with Lock of make Godrej of Link, 7 lever and Self closing Device complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and both side with different colours, matt finish of wooden colour solid panel, commercial type on both side complete all as specified and directed.

S&F 2nd class hard wood plain,solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete all as specified and directed.

S & F 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (b) and fitted to chowkhats complete all as specified and directed.

S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

S&F Steel Ventilator with top hung shutter including hinges, steel pegstay complete all as specified and directed.

M & L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S&F double door action spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover govering pivot made of brass and including all necessary fittings complete all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and directed.

S&F in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and directed.

S & F in repair 20 mm dia decorative type curtain rods, chromium plated, anodised aluminium alloy with fixing decorated brackets and side nobs and all other connected works complete all as specified and directed. Note- The rates Brackets & Knobs are included in the rates .

S&F rubber door cill 40/50mm as required in door cill complete with required nails etc complete all as specified and directed.

S&F door seal brush with aluminum holder length 85 CM to 90 CM complete with required nails etc complete all as specified and directed.

Supply & fix 100 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

Supply & fix 75 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

Supply & fix 200 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

Supply & fix 150 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

Supply & fix 125 mm hasp and staplees, safty type aluminium anodised with MS hinges pin incl bolt to hing plate and fixed with screw complete all as specified and directed.

Supply & fix 150 mm long aluminium handles, cast type, anodised complete all as specified and directed.

Supply & fix 300mm long aluminium alloy, anodised sliding door bolt with haps, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M&L for replacement of wooden glazing beading not exc 3 sq cm of sectional aea of 2nd class hard wood (any size) finished wrought of glazing of gauged joinery complete all as specified and directed.

S & F of 18mm thick Both Side pre-laminated board of any colour/Pattern, Matt finish, grade I as per IS 14587, for frame and shutter for kitchen cabinets & cupboards complete all as specified and directed.

S & F of 18mm thick Marine Plywood as per IS 710, laminated of any colour with High glossy acrylic sheet of 3mm thick , grade I, for frame and shutter for kitchen cabinets complete all as specified and directed.

S & F of medium weight, cold unserviceable rolled mild steel, SS finish, (Partial overlay/ fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing hinges complete all as specified and directed.

S & F stainless steel 304, electro-polished for corrosion resistance modular thali holder/basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed.

S & F stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder/basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg complete all as specified and directed.

S & F of 200mm length Brass handles, cast type, polished brigh complete all as specified and directed.

S & F in repairs of stainless steel grain trolley SS 304 having size of 525 x 485 x 350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed.

S & F in repairs of stainless steel Plane wire Basket/ trolley SS 304 having size of 506x480x200mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed.

S & F stainlesss steel modular perforated cutlery basket, SS 3054 size size of 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed.

S & F stainless steel hanging spice rack having three shelf spaces length of 500 mm complete all as specified and directed.

S & F in repairs 110 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays upto 04 storeys including all steel scaffloding arrangments complete all as specified and directed.

Ditto all as per item No 126 but 75mm dia

S & F in repairs 75mm dia PVC (SWR) bends with access doors, any radius, at any height including steel scaffold unserviceableing complete all as specified and directed.

S & F in repairs 110mm dia PVC (SWR) bends with access doors, any radius, at any height including steel scaffOld unserviceableing complete all as specified and directed.

S & F in repairs 75 mm dia PVC (SWR) junction single, (single T) equal or uequal, with access door at any height including steel scaff Old unserviceableing complete all as specified and directed.

S & F in repairs 110 mm dia PVC (SWR) junction single, (single T) equal or uequal, with access door at any height including steel scaffold unserviceableing complete all as specified and directed.

Dismantling old asbestos sheets of any description complete all as specified and directed.

S & F in repair Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings /cladding having effective & overall width 1015 mm & 1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including steel scaffolding of any height complete all as specified and directed.

S & F joist, channel, angle, tee sections, & MS flats fixed independently, without connection plate, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) for purlins fixed to wooden rafters and all other similar works conforming to Fe 410-W (Gde-E-250) quality-A as in structure steel including dismantling old unserviceable existing wrought iron work complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removing debris out side MoD land complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan, exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

S & F continuous hinge, mild steel, 40mm thick flaps and fixed to cup board shutter complete all as specified and directed.

S & F aluminium alloy hasps and staples, type -1, safety type, size 100 mm, anodized finish, not be less than Grade AC 10 of IS 1868 : 1996 including fixing with screws complete all as specified and directed.

M & L for 75mm thick cement concrete (1:2:4) type B-2, using 40mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including necessary expansion joints, filled solidly with a hot mixture of blown grade bitumen and sand 1:1 by weight complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Dismantling of floor of WC and bath not exc 300mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(c) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd.(d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with as specified.(e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(g) The area of Each WC portion is n.exc 2.00 Sqm each.(h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator.

Dismantling of water tanks 500 ltr of capacity and removing to store complete all as specified and directed.

M&L 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve and sockets (Ball valve make:- Prayag) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Dismantling of water tanks 1000 ltr of capacity and removing to store complete all as specified and directed.

M&L 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve and sockets (Ball valve make:- Prayag) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repairs HDPE PVC lid (Cover) for 500 to 1000 ltrs capacity PVC tank complete all as specified and directed.

M&L for complete removal of existing treatment of walls by washing down and smoothing old surface of walls, prerparation of surface and applying two coats of interior plastic emulsion paint with smooth roller finish, complete all as specified and directed.

S&F in repair curtain rod (decorative type) 25 mm dia stainless steel as approved by GE complete all as specified and directed.

S&F curtain brackets decorative type (antique), for receiving single/double curtain rod, fixing for 25 mm rod complete all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet/grid all complete all as specified and directed.

M&L for Anodised aluminium snap grid frame work for false ceiling size of grid is 605x605mm complete all as specified and directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M/L for designer ceiling board 4mm thick with GI framed work of size 4mm main 'T' 24x38.5mm and cross T of size 24x28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24xx24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, ceiling boards 60cmX60CmX4mm thick, suspended with GI wire 3mm dia and up to 2 mtr long complete incl plugging in brick walls with steel rawl plugs @ 600mm C/C complete all as specified and directed.

M&L for solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F in repair S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairStainless Steel Double Bowl Kitchen Sink made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair in brass chromium plated towel rack with 3 hooks 18" (Oval Range) complete all as specified and directed.

M&L in repair single piece WC with PP thin rim seat cover white, fixing accessories, accessories set and cistern fitting size 665x355x770 mm and necessary fittings complete all as specified and directed.

S&F for mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs complete all as specified and directed.

S&F in repair counter sunk wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories of size complete all as specified and directed.

Nand Associates (BID ID -3294888)

OM BUILDERS (BID ID -3299548)