Providing UPS backup supply to newly constructed OT complex at Trauma ground floor at AIIMS Jodhpur

Amount

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recess medium class PVC conduit as required- 4 x 10 sqmm + 2 x 6 sqmm earth wire. Make Wire: Finolex / Polycab / RRKabel Conduit & acessories: Finolex / Polycab / AKG

Providing & fixing following rating and breaking capacity and pole MCCB with thermostatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connections etc. as required- 100 Amps, 30kA, FP MCCB Make: Legrand / Hager / ABB/ L&T / Havells

Supply, Installation, Testing & Commissioning of 60KVA, Load capacity of 54KW, Full Load Current 108Amps, 415VAC ±5% output. High-frequency, microprocessor controlled, IEC EN 62040-1-2 UPS system with battery bank of 34 nos. X 150Ah SMF/ VRLA, 408 VDC battery for back-up of atleast 30 minutes. Make: UPS: Delta / APC / Vertiv / Microtec Battery: Exide / Amaron

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size- 3.5 Core X 70 sqmm Make: Finolex / Polycab / RRKabel / Havells

Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring, Compression Nut, heavy duty aluminium lugs (as per IS 8309 -1993) duly crimped with crimping tool, PVC tape as per IS 8337-1976 of following size of PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required- 3.5 Core X 70 sqmm Make: Comex / Comed

Supplying & fixing Four Pole sheet steel enclosure for Four Pole MCCB on surface / recess complete with connection, testing and commissioning etc. as required but without FP MCCB.

Providing & fixing of IP-42 IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel (5 cubicals i.e. 1 incoming + 2 outgoings + 2 spare) with thickness of CRCA sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with detachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided. Complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both sides of panel. The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire. All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber. Panel shall be mounted on Base frame of ISMC channel size 100 x 50 x 5 mm from CPRI approved fabricator only (CPRI Test certificates to be submitted). Copper (IEC 60028) bus bar by means of SMC / DMC type insulator with standard short circuit withstand capacity, high tensile nuts and bolts spring washers with colour coding and heat shrinkable PVC sleeves. LED Digital type multifunction meter. BIS approved Current Transformer. Cam operated rotary (Auto/manual) switches. 110/220 V, unibody LED Indicating lamp IEC 60947. All as per pre-approved by Engineer in charge.

Providing & Fixing of 63 Amps, Four Pole 415 V AC MCB with positive isolation of 10 kA breaking capacity (C tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm., conductor line load reversibility, IP 20 contact protection and fitted in existing distribution board/sheets / panel board, minimum electrical operation 20,000 including making connections, testing etc. as required. Make: Legrand / Hager / ABB/ L&T / Havells

Mls Bhuraram Suthar

m/s vishnu construction company