Providing Standard Lane Markings for Main Roads Hero Honda Road to Padmavathipuram with Themo Plastic Paint for Municipal Roads in Zone-I area of Municipal Corporation Tirupati

Supply and application of Thermo- Plastic paint : Providing and Laying of hot applied Thermo plastic road marking compound, 2.5mm thick including reflectorising Glass beads with Refelctorising beads on Bituminous surface at 250 Gms per Sqm area, thickness of 2.5 mm is exclusive of surface applied glass bead as per IRC 35 including cost of conveyance of materials, labour charges, hire charges of machinery for finished item of work. The materials should be of BERGER make (as per MORTH 803) the finishe dsurface to be level, uniform and free from steaks and holes as per specification 803 MORTH equivalant and nust comply with the following a) White index for the product should be in the range of 60-70 when measured against standard reference. b) Luminance factor of the material should be in the range of 80-85% at 45 degress centigrade as per AASTHOM 249 c) Crack resistance :- The applied panel cured for 7 days under ambient condition and then should be tested as per BS 3262 Part 1, 1989 and should pass at the range of 0 Degree Centigrade to 10 Degree centigrade. d) Adhesion :- Strong. e) Softening point :- 102 Degree Centigrade f) Dried firm finish :- Smooth and Uniform g) Night vision :- High as directed by the Engineer - in - Charge and confirming to IS 164-1961 (1st revision reaffirmed in 1986) and clause confirming to IRC 35-1997 on Both Bituminus Surface & on Cement Concrete Pavement Surface Note : 1. A Sealing primer may be applied in advance on Cement Concrete Pavement to Ensure proper bonding. Any laitance and/or curing compound to be removed where paint is required to be applied on conrete surface. 2.Cost of Painter is allready included in hire charges of road marking machine (Type-XI Rate in 2025 Excluding Taxes for SH / NH Approved by R & B Department)

Providing and fixing of cautionary/warning sign of size mm equilateral triangle made out of Type of ASTMD 4956-09 high intensity prismatic retro reflective sheeting confirming to IRC:67:2012 for full back ground of white colour and letters/logos done by screen printing in black colour, boarders by screen printing in red colour and fixed over4 mm Aluminium coposite material sheet having minimum 0.5 mm thick aluminium skin on both sides with back side painted with grey colour and fixed over back support frame of 25 MM x 25 MM x 3 MMalround and fixing with 35 x 35 x 4MM mounted on a MS angle post 75 mm x 75 mm x 6 mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. The sign post should be painted with one coat of red oxide paint and 2 coats of synthetic enamelpaint Black and White colour with bands of 30 cm height. The sign post shall be firmly fixed with MS base angle 35 x 35 x 4 MM in to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including cost and conveyance of all materials, equipment, machinery and labour with all leads and lift, loading charges necessary for Satisfactory completion of the work as directed by the engineer-in-charge.

Painting with synthetic enamel paints of approved brand in two coats including cost and conveyance of all materials to work site charges and all operational, incidental, labour charges etc. complete for finished item of work Kerb Painting ( TML By pass road)

Demolishing and disposal of unserceable materails within 100 Mts lead For unreinfoced cement concrte upto 15 cm thickness

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH(Excavation for Structures)

(BLD-CSTN 3-1- iv) - Construction of Brick Masonary in CM(1:6) prop., using second class Bricks of size 23 X 11 X 7 including cost and conveyance of all materials to site, tools and plants, scaffolding charges, all leads and lifts, curing, all labour charges, all other incidental and operational charges etc., complete for finished item of work.

(BLD-CSTN 6-3) Plastering with CM (1:5) prop., 12 mm thick, with sponge finishing including cost and conveyance of all materials to site, tools and plants, labour charges, leads, lifts, curing, scaffolding and all other incidental and operational charges etc., complete for finished item of work

Engaging of Man Mazdoor on daily Wages for cleaning road edges dust including all charges etc..Complete for removing of Wastage and Cleaning of Road Marking Portion

(RBR-FNDN-4G-4-II-iii) Providing Plain cement concrete M15 grade nominal mix as approved by the department using 20 mm graded hard granite machine crushed metal including cost and conveyance of all materials to site, machine mixing of concrete, all lifts, leads, delifts, centering, laying in position, vibrating, compacting, curing, removal of centering, all labour charges, tools and plants, and all other incidental and operational charges etc., complete as per specifications, drawings and as directed by the Engineer - in - Charge (concrete machine mixing)