Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹76.2 LAccepted-AOC POLICE LINE ROAD KUMOUR PITHORAGARH | L1 | Accepted-AOC L1 | |
| 2 | L2₹76.3 L+₹9,800.94 (0.13%)Rejected-AOC AGHAPUR RAMPUR UTTAR PRADESH 244901 | RAMPUR | UTTAR PRADESH | 244901 | L2 | Rejected-AOC L2 | |
| 3 | L3₹88.2 L+₹12.0 L (15.8%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
Refer Docs
EMD Value
₹1.8 L
Closing Date
18 Mar 2021, 5:00 pmClosed
Superintending Engineer,Contract and Procurement-I
VCV Gabar Singh Urja Bhawan
Construction of 11KV Feeders for 33/11KV, GIS Sub station, under IPDS, on turnkey basis.Package-B (Almora, Haldwani, Gadarpur and Kiccha)
2021_UPCLC_30465_4
CCP-I/43/2020-2021
Open Tender
Electrical Works
Turn-key
90 days
As per tender specification
As per tender specification
6 documents required · 6 mandatory
₹5,900
Executive Engineer, ESD, UPCL
₹1.8 L
9 Jun 2021
2 Mar 2021
19 Mar 2021
2 Mar 2021
18 Mar 2021
3 Mar 2021
Amount
11 Mtr Long STP-SP-55 Pole (Bottom portion hot dip Galvanized)
8.5M SP 23 ST Pole (Bottom portion hot dip Galvanized)
PCC Pole 8.5m
ACSR Dog conductor
ACSR RACCOON conductor
ACSR Rabbit conductor
ACSR Weasal Cond.
Earthing rod 20x2500 mm2
MS Angel 65x65x6 mm
X Angle 65X65X6 mm V-type 11 KV
M S Angel 50x50x6mm
11 KV XLPE Cable 3x300 mm2 for O/G Feeder
MS Channel 100x50x6 mm for Top
GI Wire 6 SWG for Earthing
11 KV POLYMER PIN INSULATOR WITH PIN
11 KV Polymer Disc insulator B&S type
11 KV Disc fitting B&S 45 KN
STAY SET Gl 16X1800
11kv Xlpe Cable Size 3x240sqmm
Jointing Kit Size 3x240mm 11kv xlpe O/D
Stay Wire
STAY WIRE GI 7/3.15MM, 7/10SWG
EARTH WIRE Gl 7/1.6 MM 7/16SWG
EARTH ROD 20X2500MM
GIWIRE 10SWG
11KV GANG OPERATING 400A GO SWITCH
T- OFF/Single Pole Channel MS Channel 100x50mm
Holding Clamp with Nutt & Bolt
Holding Clamp For STP
PCC Clamp
F-Clamps with N/B
Stay Clamp with N/B
GI Pipe for inserting Cable Size 300mm Dia
PG Clamp for Dog Conductor
11 KV Joint Kitt 3x300 mm2 O/D Type
Top Channel Clamp with N&B
11 KV stay insulator
Stay Clamp S/E SP 23 with N&B
Earth wire clamp SP 23 with N&B
HC WITH N/B SP-55 POLE
STAY CLAMP FOR SP-55 WITH N&B
Gl EARTHING STRIP 25'3 MM
BRACING CLAMP FOR SP-55 WITH N&B
EARTH WIRE CLAMP
Double Pole Clamp with Nutt & Bolt
Guarding Clamp with Nutt & Bolt
Bolt & Nuts
Description of Work / Item(s)
Amount
11 Mtr Long STP-SP-55 Pole (Bottom portion hot dip Galvanized)
8.5M SP 23 ST Pole (Bottom portion hot dip Galvanized)
PCC Pole 8.5m
ACSR Dog conductor
ACSR RACCOON conductor
ACSR Rabbit conductor
ACSR Weasal Cond.
Earthing rod 20x2500 mm2
MS Angel 65x65x6 mm
X Angle 65X65X6 mm V-type 11 KV
M S Angel 50x50x6mm
11 KV XLPE Cable 3x300 mm2 for O/G Feeder
MS Channel 100x50x6 mm for Top
GI Wire 6 SWG for Earthing
11 KV POLYMER PIN INSULATOR WITH PIN
11 KV Polymer Disc insulator B&S type
11 KV Disc fitting B&S 45 KN
STAY SET Gl 16X1800
11kv Xlpe Cable Size 3x240sqmm
Jointing Kit Size 3x240mm 11kv xlpe O/D
Stay Wire
STAY WIRE GI 7/3.15MM, 7/10SWG
EARTH WIRE Gl 7/1.6 MM 7/16SWG
EARTH ROD 20X2500MM
GIWIRE 10SWG
11KV GANG OPERATING 400A GO SWITCH
T- OFF/Single Pole Channel MS Channel 100x50mm
Holding Clamp with Nutt & Bolt
Holding Clamp For STP
PCC Clamp
F-Clamps with N/B
Stay Clamp with N/B
GI Pipe for inserting Cable Size 300mm Dia
PG Clamp for Dog Conductor
11 KV Joint Kitt 3x300 mm2 O/D Type
Top Channel Clamp with N&B
11 KV stay insulator
Stay Clamp S/E SP 23 with N&B
Earth wire clamp SP 23 with N&B
HC WITH N/B SP-55 POLE
STAY CLAMP FOR SP-55 WITH N&B
Gl EARTHING STRIP 25'3 MM
BRACING CLAMP FOR SP-55 WITH N&B
EARTH WIRE CLAMP
Double Pole Clamp with Nutt & Bolt
Guarding Clamp with Nutt & Bolt
Bolt & Nuts
Description of Work / Item(s)
Amount
Erection of Double Pole on ST Pole with fitting of all accessories of pole with Grouting & Muffing etc.
Laying of 11 KV XLPE Cable 3x300/3x400 mm2 with sand,bricks etc.
Painting of ST Pole with primer and aluminium coat etc
DISMANTELING OF 11 KV LINE RACCOON CONDUCTOR and received back to JE Store
DISMANTLING OF EXISTING LT CABLE COMPLETE WITH ALL ASSESERIES and received back to JE Store
EXCAVATION OF EARTH OF SIZE 0.9X0.6X1.9 METER FOR ERRECTJON OF POLE COMPLETE JOB AS PER UPCL SPECIFCATION
ERECTION OF ST SINGLE POLE SP-55
ERECTION OF ST DOUBLE POLE SP-55
GROUTING OF POLE IN SIZE 0.45X0.45X1 .22 MM IN CC RATIO 1:4:8 AND FILLING THE PIT WITH MUD AND BOULDERS AS PER RESSPO MANUAL
MUFFING OF POLE IN SIZE 0.45X0.6 RADIOUS WITH CC 1:3:6 BLOCK SIZE 45 CM HEIGHT FROM GROUND LEVEL
FABRICATION OF STEEL AFTER CUTTING IN REQUIRED SIZE AND DRILLING OF HOLES AS PER RESSPO SCHEDULE
EXCAVATION OF EARTH FOR STAY PIT OF SIZE 0.6X0.6X1.2 METER COMPLETE JOB AS PER UPCL SF^IFCATION
FIXING . TIGHTENING AND NOZZALING OF STAY WITH POLE AND STAY ROD AS PER RESSPO MANUAL
GROUTING OF STAY IN SIZE 0.6X0.6X0.3 MM IN CC RATIO 1:4:8 AND FILLING THE PIT WITH MUD AND LJOULOERS AS PER RESSPO MANUAL
LAYIING.SPREADING. STINGING AND SAGGING OF 11 KV LINE IN 3 PHASE RACCOON CONDUCTOR SINGLE CKT INCLUDING Gl EARTH WIRE AS PER UPCL SPECIFICATION
LAYIING.SPREAD1NG. STINGING AND SAGGING OF LT LINE IN 3 PHASE 4 WIRE AB CABLE
PAINTING OF POLES WITH ANGLE AND CHANNEL AND ALL STEEL PART BY ONE COAT OF RED OXIDE AND TWO COATS OF AL PAINT AND TWO STIPS OF FLUORESCENT ALTERNATE RED AND WHITE PAINT 30CM WIDE UPTO 1.5M FROM GROUND LEVEL
EARTHING OF SUPPORT WITH MS EARTH ROD OF 2.5M LONG BY HAMMERING IT TO PROPER DEPTH AND CONNECTING EARTH ELECTRODE WITH THE HELP OF Gl WIRE
GAURDING OF LINE OVER ROAD CROSSING AS PER DRAWING WITH 6/8 SWG GI WIRE INCLUDING FIXING OF GAURDING CHANNEL/ANGLE AS PER RESPO MANUAL
MOUNTING AND FIXING OF TPMO ON DOUBLE POLE STRUCTURE INCLUDING MAKING OF CONNECTION COMPLETE WORK
ROUTE CLEARANCE BY CUTTING TREE BRANCHES LOPPING AND CHOPPING OF TREES FOR 1 1 KV AND LT LINE
PROVIDING AND FIXING OF DANGER BOARD AND NUMBER PLATE BY PROVIDING CLAMPS OF MS FLAT 50X6MM, N&B DANGER BOARD OF MS SHEET 2MM THICK 11''X7'' SIZE INCLUDING MATERIAL
Excavation of foundation pit for erection of pole support as per RESPO specification of the following types of pole in bolder mixed soil, grouting of support in cc 1:4:8 block including cost of bllast, cement and sand, back filling of soil and boulders in pit and ramming filling of accessories on the pole, leveling and erection of pole. For Steel Tubular Pole SP-23 (single pole)
Muffing of poles with cc 1:3:6 block and 45 cm hight from ground level including cost of ballast, cement and sand etc.
Fabrication of MS channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing.
Erection with digging of pits for stay as per RESPO manual in all type of soil , grouting of stay rod with cc 1:4:8 cement block including cost of ballast, cement and sand, after grouting back filling of soil and boulders in the pit and ramming, nozzaling and fixing of stay wire with pole and stay rod as per drawing for 11 KV line.
Erection and earthing of 11 KV line support with M.S. Earth rod of 2.5 meter long including excavation of pit and digging of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual.
Laying, spreading, Stringing and sagging of 11KV line of rabbit conductor as phase wire with 7/16 SWG earthing wire complete including fixing of all accessories in 3 No. conductor in parallel with binding and jumpering as per profile and sagging chart. - 3Phase 4 wire
Guarding below 11 KV line by sagging, stringing of guard wire (2No.), Earth wire 7/16 wire, binding of cross wire with GI wire No. 6 SWG at a distence 2 Mtr. Between two cross wire complete cutting binding & nozzling etc including fixing of guarding angle complete in all respect.
Erection of following support after digging of pits & Grouting by cc mixture of Ratio size 1:4:8 including fixing &fitting of all required accessories on polecomplete in all Respect.- D/P Structure on SP-55
Erection of following support after digging of pits & Grouting by cc mixture of Ratio size 1:4:8 including fixing &fitting of all required accessories on polecomplete in all Respect.- Single Pole SP-55
Erection of following support after digging of pits & Grouting by cc mixture of Ratio size 1:4:8 including fixing &fitting of all required accessories on polecomplete in all Respect.- PCC Pole
Digging of Pits & Grouting of Stay set by CC mixture of ratio 1:4:8 including nuzzling &binding complete in all respect
Digging of Cable trench for size 3x240sqmm XLPE cable including Laying of 11kv XLPE cable in trench and back filling by sand/soil complete in all respect as per direction of Engineer in charge.
Fixing of MS Earthing Rods 20x2500mm for Earthing of support including driving earth rode 2.5 mtr deep below ground level complete in all respects.
Fixing ,filling &installation of 11kv O/D cable Jointing kits complet in all respect as per direction of Engineer in charge
Fabrication of X- arm, Channel & Angel for above D/P including cutting Hole drilling.
Laying,spreading,stringing & sagging of following Line on following conductor including binding on insulators & final jumpering- 11kv Line Rabbit
Laying,spreading,stringing & sagging of following Line on following conductor including binding on insulators & final jumpering- 11kv Line Weasel
Painting of following Structure with one coat of red oxide primer and two coat ofred oxide primer and two coat of aluminium Burzer Paint.- D/P Structure on SP-55
Painting of following Structure with one coat of red oxide primer and two coat ofred oxide primer and two coat of aluminium Burzer Paint. - S/P Structure on SP-55
Muffing of STP Pole SP 55
Loaping & choping of Tree branches along with 11 kv line
Errection of Single Support on ST Pole with fitting of all accessories of pole with Grouting & Muffing etc.
looping chooping of tree branches on the root of 11 kv line etc.
Errection of Double Pole on ST Pole with fitting of all accessories of pole with Grouting & Muffing etc.
Errection & Grouting of Stay.
Laying of 11 KV XLPE Cable 3x300/3x400 mm2 with sand,bricks etc.
Making trech with first class bricks,sand, cement ,concrete etc.
Laying, Stringing and sagging of 11 KV line on ACSR Dog conductor including jumpering & beinding
Painting of ST Pole with primer and aluminium coat etc
Making Guarding with 6 SWG Wire and fitting of Guarding Angle complete etc.
dmd engineers
SJ TRANSFORMERS LLP
SJ TRANSFORMERS LLP
dmd engineers
Saun Engineering and Construction Co P Ltd
dmd engineers
Saun Engineering and Construction Co P Ltd
dmd engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .