Annual Maintenance Repairs and other emergent works of Flood Control Sub Division Ganderbal of I FC DIvision Ganderbal for the year 202122 under MH 2711 MH 4711. Fresh for eNIT NO 13 of 202021 Serial NO 03

Amount

Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kinds of soil

Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc. lead upto 50 m and lift upto 1.5 m in All kinds of soil.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

All kinds of soil

Ordinary rock

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.

All kinds of soil

1 meter from cutting edge.

25meter beyond 1 m from cutting edge

50meter beyond 1 m from cutting edge

Ordinary rock

1 meter from cutting edge.

25meter beyond 1 m from cutting edge.

50meter beyond 1 m from cutting edge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :

All kinds of soil

Ordinary or hard rock

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work up to plinth level with:

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

DAMP PROOF COURSE: Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

DAMP PROOF COURSE Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

CAST-IN-SITU: Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

FORM WORK : Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms.

Shelves (cast-in-situ)

Lintel, beams, plinth beams, girders, bressumers and cantilevers

Columns, pillars, piers, abutments, posts and struts.

Edges of slabs and breaks in floors and walls (Under 20 cm wide)

Edges of slabs and breaks in floors and walls (Above 20 cm wide)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.-Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :

Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

RANDOM RUBBLE MASONRY Random Rubble masonry with hard stone in foundation and plint including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: a. Cement mortar 1:6 (1 Cement : 6 coarse sand)

Quarry

Nallah

Dry random rubble masonry with hard stone in foundation and plinth:

With bond stone.

Quarry

Nallah

Without bond stone

Nallah

Frames and trusses Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)

First class kail wood

Second class kail wood

Kiln-Dried Wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of: Engineer-in-charge

First class kail wood

Second class kail wood

Kiln-Dried Wood/Silver wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of: Engineer-in-charge

First class kail wood

Second class kail wood

Kiln-Dried Wood/Silver wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.

Fixed to steel windows by welding

Fixed to openings / wooden frames with rawl plugs screws etc.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :

Budloo/ Fire wood

Popular Wood

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Riveted and bolted

Welded

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

25mm thick with 12.5 mm nominal size stone aggregate.

40mm thick with 20 mm nominal size stone aggregate.

50 mm thick with 20mm nominal size stone aggregate.

C.G.I. SHEETS ROOFING Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

0.63 mm thick with zinc coating not less than 275 gram/m2

0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.

0.63 mm thick with zinc coating not less than 275 gram/m2

0.50 mm thick with zinc coating not less than 275 gram/m2

CIELING Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws.

1st class kail wood

2nd class kail wood

Popular wood

Kiln-Dried Wood/Silver wood

Budloo / Fir wood

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete

Second class Kail wood

First class Budloo/Fir wood

Popular wood

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:

1 : 4 ( 1 cement : 4 fine sand)

1 : 6 ( 1 cement : 6 fine sand)

CEMENT PLASTER (IN FINE SAND) 15mm Cement plaster on the rough side of single or half brick wall of mix:

1 : 4 ( 1 cement : 4 fine sand)

1 : 6 ( 1 cement : 6 fine sand)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

White washing with lime to give an even shade on New Work (three or more coats)

Colour washing such as green blue or buff to give an even shade

New work (two or more coats) with a basecoat of white washing with lime.

New work (two or more coats) with basecoat of whiting

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.

Applying priming coat: With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood

Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On steel work

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On concrete work

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: One coa

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:

1:3:6 or richer mix (i/c equivalent design mix)

1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :

From brick work in cement mortar

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead

Dismantling old protection work including cutting of crates and stacking of stones

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete.

150 mm dia. R.C.C. pipe-(6”)

250 mm dia. R.C.C. pipe-(9”)

300 mm dia. R.C.C. pipe-(12”)

450 mm dia. R.C.C. pipe-(18”)

600 mm dia. R.C.C. pipe-(24”)

900 mm dia. R.C.C. pipe-(36”)

1000 mm dia. R.C.C. pipe-(40”)

Constructing muthu bunds, comprising boulders and wood bushes in alternate layers; including working in water situations.

Dry stone pitching (any thickness) excluding cost of stones.

On Horizontal

On Top copings of banks

On Slopes

Hand-packing stones in wire-crates; excluding cost of crates and stones

Dumping stone excluding cost of stones.

in Horizontal on level

on Slopes (Behind pitching)

Grouting of stone pitching using M-10 nominal mix concrete (max. size of aggregates; 20mm nominal) @ 3.65 cum per 100Sqm on horizontal/side slopes; complete including curing.

Grouting of stone pitching using M-10 nominal mix concrete (max. size of aggregates; 20mm nominal) @ 6.00 cum per 100 sq m on horizontal/side slopes; complete including curing.

Opening out old wire crates those and re-binding after filling.

Supply of Stone boulder (nallah) nominal size 225 mm (Stack measurements reduced by 15%)

Supply of Stone boulder (quarry) nominal size 225 mm (Stack measurements reduced by 15%)

Filling empty cement bags with sand/ earth; including cost of sewing and strings; excluding cost of bags and earth / sand.

Unloading sand/earth filled bags from boats

Placing in dry

Placing in Water

Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively )

Shingle clearance from canals.

Weed clearance

From lakes(using boats)

From canals(including extraction of roots)

SLIP CLEARANCE

In ordinary soils disposal lead upto 50 m and lift upto 1.5 m.

In soils; mixed with moorum/ Kankar/ shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m.

In soils; mixed with Decomposed Rocks; by blasting or any other means

Engagement of Labour

Bullockman with single bullock

Chowkidar

Belder

Coolie

Mali/sewerman

Helper(Technician)

Labour for fabrication of upvc extruded casement/ sliding windows And doors including drilling holes, fixing of fittings & hardware’s, hire Charges of drill machine and electricity charges etc.

Labour for installation of upvc extruded casement/ sliding windows And doors including scaffolding.

Mason (for brick work) 1st class

Mason (for plaster of paris work) 1st class

Fitter (Grade 1)

Carpenter 1st class

Blacksmith 1st class

Mason (for ornamental stone work) 1st class

Driver for Road Roller, Concrete Mixer, Truck etc.

Mistry/ Operator (Pile / Special machines)

Technician

Mason (for brick work) 2nd class

Mason (for plain stone work) 2nd class

Glazier

Assistant Fitter or 2nd class Fitter

Carpenter 2nd class

Blacksmith 2nd class

Painter

Nozzle man/ gun man

Boatman

Boat(Capacity up to 20cum)

Mason (average)

Carpenter (average)

Hire charges of Pumpset of capacity 4000 litres/hour

Surface Vibrator

Hire charges of Concrete Mixer 0.25 to 0.40 cum with hopper

Cutting saw machine(wood cutter)

Supplying and stacking of Good Earth at site including royalty,(earth measured in stacks will be reduced by 20% for payment

Empty Cement Bags

Stone dust

Engagement of JCB including POL with driver complete.

Engagement of JCB including poclain with driver complete.

Vibrator

Hire charges of vehicle during day or night alongwith licensed comercial driver for site inspection/ movement of officials within jurisdiction including Driver and POL on need basis only.

Upto 60Km Journey

Upto 120Km Jounney

Upto 250Km Journey

Engagement of Load carrier for carriage of material within jurisdiction including Driver and (POL) if and when needed

Upto 60Km Journey

Upto 120Km Jounney

Disassembling and reassembling of chain saw wood cutter after necessary repairs including all accessories required for repair work with all sorts carriages complete.

Dismantling, Realignment and assembling after repairs of double winch iron gate

Dismantling, Realignment and assembling of single winch iron gate

Repairs to shutter by way of removing dents, kinks and setting of iron gate

Lubricating, greasing after cleaning the machine (complete job)

Repairs to winch rod by removing and setting of dents and bends(double threaded winch rod)

Providing/replacing sill/groove MS steel channel of ISMC 150X75 mm

Repairs to side channels by way of removal of bends and kinks incl.setting and fixing complete

Providing and fixing of pipe sleeves (Rain water pipes) incl.priming coat and two coats of metallic

Providing & fixing of grease lids for winch machines

Providing & fixing of coupling of required sizes

Providing & fixing of rubber seal for shutters

Disassembling and reassembling of water Control gate after necessary repairs including all accessories req. at site with all sorts of carriage complete in all respects to entire satisfaction of Engineer In charge

Double winch Machine

Single winch machine..

Worm Rods

Nut bolts

Electric Welding

operating handles

Rubber seal of standard quality

Providing , Installation , commissioning & testing of Single Winch machine complete set of standard quality of 3 tonne capacity with double threaded 50mm dia Winch rod, Gears , Pedestal Rain Cover ,Grease Lids, MS Sleeves, operating Handle with locking arrangement including greasing & oiling complete Job including all carriages & extra carriages upto site of wor

Providing , Installation , commissioning & testing of Double Winch machine complete set of standard quality of 5 tonne capacity with coupling rod , coupling set double threaded 50mm dia Winch rod, Gears , Pedestal Rain Cover ,Grease Lids, MS Sleeves, operating Handle with locking arrangement including greasing & oiling complete Job including all carriages & extra carriages upto site of work

Fabrication, supply and installation of M.S. water control gate manually operated at site by mechanical arrangements with single winch macine of standard quality and size with winch rods of gun metal 50mm dia of required lengths, 6mm thick gate shutter to be fixed on channels of required/suitable sizes and length's to be properly welded including all accessarioes required at site with all sorts of carriages dully operated tested commissioned at site of work complete job to entire satisfication of Engineer in-Charge.

Fabrication, supply and installation of M.S. water control gate manually operated at site by mechanical arrangements with double winch macine of standard quality and size with winch rods of gun metal 50mm dia of required lengths, 6mm thick gate shutter to be fixed on channels of required/suitable sizes and length's to be properly welded including all accessarioes required at site with all sorts of carriages dully operated tested commissioned at site of work complete job to entire satisfication of Engineer in-Charge.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same in- All kinds of soil.

Providing refreshment to supervisory staff of the for restoration of water during night /day or the participants of the Independence Day , Republic day or other official Functions complete job including packing at venue with following Menu :

Water Bottle One litre.

Water Bottle 500 ml.

Water bollte 250 ml.

Boiled Egg.

Biscuit standard Quality of 50 g.

Dal 50 g Pack.

Banana.

Butter Toastes each pair.

Toastes without Butter each pair.

Tea Sugar each Cup.

Tea Namkeen each Cup.

Normal Chicken Biryani one plate for person.

Rice Plate with Dal , vegetables & curd for each person.

Rice Plate with vegetables, Single piece meat & curd for each person.

Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport

Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms

Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km)

Cement & steel, G.I/C.I pipe avg. lead beyond 10 Kms upto 20 Kms (per Km)

Cement & steel, G.I/C.I pipe avg. lead beyond 20 Kms per additional Km

Sand & Agg. 20 mm avg. lead of upto 01 Kms

Sand & Agg. 20 mm avg. lead upto 02 Kms

Sand & Agg. 20 mm avg. lead upto 03 Kms

Sand & Agg. 20 mm avg. lead upto 04 Kms

Sand & Agg. 20 mm avg. lead upto 05 Kms

Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km)

Sand & Agg. 20 mm avg. lead beyond 10 Kms upto 20 Kms (per Km)

Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km

40 mm Agg. avg. lead of upto 01 Km

40 mm Agg. avg. lead upto 2 Kms

40 mm Agg. avg. lead upto 3 Kms

40 mm Agg. avg. lead upto 4 Kms

40 mm Agg. avg. lead upto 5 Kms

40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km)

40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km)

40 mm Agg. avg. lead beyond 20 Kms per additional Km

Stone soiling avg. lead of upto 1 Km

Stone soiling avg. lead upto 2 Kms

Stone soiling avg. lead upto 3 Kms

Stone soiling avg. lead upto 4 Kms

Stone soiling avg. lead upto 5 Kms

Stone soiling avg. lead beyond 05 Kms upto 10 Kms (per Km)

Stone soiling avg. lead beyond 10 Kms upto 20 Kms (per Km)

Stone soiling avg. lead beyond 20 Kms per additional Km

Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour

Cement for an avg. lead upto 50 mtr.

Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Steel for an average lead upto 50Mtr

Steel for an every additionaal lead of 50Mtrs or part thereof beyond 1st 50Mtrs

Pipe for an average lead upto 50Mtr.

Pipe for an every additionaal lead of 50Mtrs or part thereof beyond 1st 50Mtrs

Soling for an avg. lead upto 50 mtr.

Soling for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Sand & 20mm Agg for an average lead upto 50Mtr

Sand & 20mm Agg for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

40mm Agg for an average lead upto 50Mtr

40mm Agg for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

QAISAR MOHAMMAD SOFI

RATHER CONSTRUCTION CO

M/S MALIK AND SONS PROP. MOHAMMAD MAQBOOL MALIK