Various maintenance work to filter house and Sedimentation tank including providing fencing and repair work of compound wall at east side and various painting works

Amount

Dismantling tile work in floors and walls laid in cement mortar including stacking materials within 50 metres lead for thickness of thickness 10mm to 25mm

providing and fixing RBT (Reinforced barbed tape)(TATA Aayush)horizontal wires between vertical portion of existing Y-shaped angles with G.I staples and G.I clips to retain horizontal including making necessary cuts/holes in the supporting angles .(2.5 X 2.5 TATA Aayush Barbed Wire)(Wire diameter: 2.5 mm)

Centering and shuttering including strutting, propping etc. and removal of form work after curing for foundations, footings, base of columns, etc. for mass concrete including cost and conveyance of all materials and labour charges etc. complete.

Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) of reinforced cement concrete excluding cost of centering, shuttering, finishing and reinforcement all work upto plinth level.

Providing and laying in position 1:2:4(1 cement :2coarse sand : 4 graded stone aggregate 20mm nominal size) of reinforced cement concrete excluding cost of centering, shuttering, finishing and reinforcement all work upto plinth level.

Reinforced cement concrete work 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, and binding using thermo-mechanically treated (TMT) bars with cost and conveyance of all materials and labour charges etc. complete.

Random rubble masonry with hard stone in cement mortar 1:6 (one cement six coarse sand) for foundation and plinth including leveling up with cement concrete 1:6:12 (one cement six coarse sand twelve graded stone aggregate 20mm nominal size)including cost and conveyance of all materials and labour charges etc. complete.

Laterite masonry in cement mortar 1:6 (one cement six sand) using neatly dressed laterite stones including cost and conveyance of all materials and labour charges etc. complete for superstructure walls above plinth level upto floor five level .

Solid concrete block (75kg/cm2) masonry in cement mortar 1:6 using concrete brick of size 40x20x12cm upto plinth level including cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing Aluminium composite panel (ACP) board in paneling fixed in aluminium doors, windows shutters and partitions frames with CP. brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing fibre net approved quality over M.S angle including cost and conveyance of all materials and labour charges etc. complete but excluding cost of M.S angle etc. complete.

Fixing dismantled fiber net in position etc. complete

Providing M.S. grills fixed to openings of required pattern in frames of windows etc. with MS flats, square or round etc. with a coat of iron primer and fixing in position including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the department officers.

Plastering with C.M. 1:4 (one cement four sand), 12mm thick for walls inside and outside with necessary scaffolding and thread lines, including cost and conveyance of all materials and labour charges etc. complete.

Plastering with C.M. 1:3 (one cement three fine sand), 6mm thick including cost and conveyance of all materials and labour charges etc. complete.

Supplying and paving best quality highly compressed inter lock floor paving blocks 50mm or nearest available thick, top finish with white cement and colour powder mix, over quarry dust or 6mm broken stone chips after leveling and rolling to a thickness of 80mm including cost and conveyance of all materials and labour charges etc. complete

Providing and fixing 110mm (4") PVC pipes (4kg/cm2) exposed on wall including all PVC fittings, including fixing the pipe with clamps at 1.00m spacing. This insludes jointing of pipes and fittings with siovent cement and testing of joints complete as per the direction of Engineer in charge.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc. complete.

Removing white or colour wash by scraping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works including cost and conveyance of all materials and labour charges etc. complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including cost and conveyance of all materials and labour charges etc. complete.

Painting with synthetic enamel paint two or more coats new work of approved brand and manufacture to give and even shade after cleaning the surface including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

Painting with synthetic enamel paint one or more coats old work of approved brand and manufacture to give and even shade after cleaning the surface including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

Painting with aluminium paint two or more coats new work of approved brand and manufacture to give and even shade after cleaning the surface including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

French sprit polishing two coats after cleaning the surface including cost and conveyance of all materials and labour charges etc. complete.

Painting with weather proof paint (Apex or equivalent quality) two or more coats on new surface after cleaning the surface etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers for outside walls.

Painting with weather proof paint (Ace or equivalent quality) two or more coats on old surface after cleaning the surface etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers.

Providing 150mm or nearest available size PVC gutter (4kg/cm2) with necessary clamps, bolts, nuts and specials such as droppers, sockets etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the Engineer in charge

Steel work in built up GI tubular (GI round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing poly carbonate sheet 1.2mm or nearest thick with necessary nuts and bolts plate washers bitumen washers and 150mm overlaps at ends including cost and conveyance of all materials and labour charges etc. complete. as per the instructions of the dept. officers.

Providing coloured roofing sheet (lotus or equivalent quality) with necessary nuts and bolts plate washers bitumen washers and 150mm overlaps at ends including cost and conveyance of all materials and labour charges etc. complete.

Providing and fixing IS:12817 marked stainless steel butt hinges of size 75X47X1.80mm with stainless steel screws etc. complete

Providing and laying antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Size of Tile 500x500 mm)

HARISH KUMAR CP

RANJITH N P