Tender ID

IOCL

Technical BO

Works

Mechanical Works

Structure Repair and Refurbishment work at NRPL Roorkee station

IndianOil

NRPL Roorkee | Haridwar, Uttarakhand

Amount: ₹7.2 LCloses: 26 Oct 2026Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published12 Oct 2026
Closed26 Oct 2026
Technical Evaluation30 Oct 2026
Award—

Bids

5 Bids27 Oct 2026

#	Company	Status
1	Ateek Ahmed Admitted-Technical AMBALA \| AMBALA \| HARYANA \| 133001	Admitted-Technical
2	BANGALI YADAV Admitted-Technical	Admitted-Technical
3	K D ENTERPRISES Admitted-Technical	Admitted-Technical
4	PRABHUNANDAN KUMAR Admitted-Technical	Admitted-Technical
5	V.K. ENTERPRISES Admitted-Technical NEW DELHI	Admitted-Technical

Tender Value

₹7.2 L

Closing Date

26 Oct 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

General Manager (Material and Contract)

Address

Northern Region PipelinesPO Panipat Refinery Baholi, Panipat

Work Description

Structure Repair and Refurbishment work at NRPL Roorkee station

Tender Information

Tender ID

2026_NRPNP_191739_1

Reference Number

PNP26067

Tender Type

Open Tender

Product Category

Mechanical Works

Form of Contract

Works

Location

NRPL Roorkee

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender document

Documents Required

10 documents required · 10 mandatory

Fee

RequiredEMD submission proof (.pdf)

RequiredScanned copy of Unpriced SOR (.pdf)

PreQual

RequiredAudited financial statements for last 3 FY (.pdf)

RequiredWork order and completion certificate for commercial qualification (.pdf)

RequiredAnnexure-35 on their letter head (If Applicable) (.pdf)

RequiredOther commercial documents PAN, PF, GST, POA, BOARD RESOLUTION, CIN, MOA, AOA, PARTNERSHIP DEED (.pdf)

RequiredCommercial Annexures (.xls)

Technical Bid

RequiredDocuments for technical qualification (.pdf)

RequiredOther technical documents (.pdf)

Finance

RequiredBoQ, Price bids to be Quoted here (.xls)

Fee & Financial Details

EMD Fee Amount

Exempted

Important Dates

Last Activity

27 Oct 2026

Published

12 Oct 2026

Bid Opening

27 Oct 2026

Download Starts

12 Oct 2026

Download Ends

26 Oct 2026

Submission Starts

12 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
10STRUCTURE REFURBISHMENT WORK
10.1	Supplying and fixing, shop fabricated M.S. steel Electroforged Welded Gratings (Hot dip galvanised as per IS:2629 and tested as per IS:2633 and IS:6745) of approved make with quantity of zinc coating shall not be less than 9.0 N/sqm of surface area (0.12 mm uniform thickness) over drains, stair treads etc., wherever required with maximum size of void/ mesh in the grating limited to 33 mm x 50 mm including welding/ fixing/ clamping to base frame, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.	2.95	TO	1,61,495.33	₹4,76,411.22
10.2	Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboards, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint "EPILUX 155" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (excluding the cost of concrete work).	0.95	TO	1,22,930.63	₹1,16,784.1
10.3	Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.]	3,500	KG	5.02	₹17,570

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.16 MB

Work Item Documents

Tender-Acceptance-Format.pdf

Additional Documents • 0.08 MB

FAQs-IOCL-Online-EMD.pdf

Additional Documents • 0.55 MB

Bidders_help_Document_for_Preferencial_Bidding_20230207_v1.pdf

Additional Documents • 0.82 MB

Special_Instructions_to_the_Bidders_Version_5_dated_30_June_2025.pdf

Additional Documents • 2.80 MB

BOQ_202074.xls

BOQ • 0.32 MB

Commercialannexures.xls

Additional Documents • 0.44 MB

PNP26067final.pdf

Tender Documents • 9.18 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Ateek Ahmed

Admitted-Technical

AMBALA | AMBALA | HARYANA | 133001

Admitted-Technical

Admitted-Technical

Admitted-Technical

Admitted-Technical

NEW DELHI

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
10STRUCTURE REFURBISHMENT WORK
10.1	Supplying and fixing, shop fabricated M.S. steel Electroforged Welded Gratings (Hot dip galvanised as per IS:2629 and tested as per IS:2633 and IS:6745) of approved make with quantity of zinc coating shall not be less than 9.0 N/sqm of surface area (0.12 mm uniform thickness) over drains, stair treads etc., wherever required with maximum size of void/ mesh in the grating limited to 33 mm x 50 mm including welding/ fixing/ clamping to base frame, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.	2.95	TO	1,61,495.33	₹4,76,411.22
10.2	Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboards, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint "EPILUX 155" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (excluding the cost of concrete work).	0.95	TO	1,22,930.63	₹1,16,784.1
10.3	Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.]	3,500	KG	5.02	₹17,570

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

10STRUCTURE REFURBISHMENT WORK

10.1

Supplying and fixing, shop fabricated M.S. steel Electroforged Welded Gratings (Hot dip galvanised as per IS:2629 and tested as per IS:2633 and IS:6745) of approved make with quantity of zinc coating shall not be less than 9.0 N/sqm of surface area (0.12 mm uniform thickness) over drains, stair treads etc., wherever required with maximum size of void/ mesh in the grating limited to 33 mm x 50 mm including welding/ fixing/ clamping to base frame, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.

2.95

1,61,495.33

₹4,76,411.22

10.2

Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboards, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint "EPILUX 155" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (excluding the cost of concrete work).

0.95

1,22,930.63

₹1,16,784.1

10.3

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.]

3,500

5.02

₹17,570