Upgradation of Water Pipe Line Network in Trikam Village and Different Places of at Ramol-Hathijan Ward of East Zone of AMC.

(5) Date of e-Tender (Technical Bid) : Dt.17/03/2026 at 17.00 hours

Municipal Commissioner Multi Media Consultants Pvt. Ltd.

Ahmedabad Municipal Corporation 401, Shivalik Shilp, Iskcon Cross Roads,

Sardar Patel Bhavan S. G. Highway, Ahmedabad - 380

Ahmedabad – 380 001 Phone : (079)- 40399079 /

Gujarat (INDIA) e-mail : [email protected],

website : mmcpl.co.in

AHMEDABAD MUNICIPAL CORPORATION

Ramol Hathijan Ward - East Zone

UPGRADATION OF WATER PIPE LINE NETWORK IN TRIKAM VILLAGE AND

DIFFERENT PLACES OF AT RAMOL-HATHIJAN WARD OF EAST ZONE OF

Item Amount in Rs.

2.0 Distribution Labour Cost without GST

Total Cost in Rs .

AHMEDABAD MUNICIPAL CORPORATION

UPGRADATION OF WATER PIPE LINE NETWORK IN TRIKAM VILLAGE

AND DIFFERENT PLACES OF AT RAMOL-HATHIJAN WARD OF EAST ZONE

Sr. Items Quantity Rate in Unit Amount in

1 Excavation for foundation in all type of hard and

soft soil including sorting out stacking of useful

material and disposing of excavated stuff upto

mt. lead loose or soft soil)

a) 0 to 1.5 m depth 300.00 115.92 Cmt

b) 1.5 to 3.0 m depth 100.00 128.52 Cmt

2 Transporting from AMC store and laying spigot

and socket New DI pipe line DI-K-9 pipe of

various classes with CI/DI/MS specials of

following diameters. Rate includes excavation up

to minimum 1.0 mt. depth from top of pipe/as per

requirement in any soil, refilling after laying pipe,

covering and temptation of carting surplus earth

up to 30 mt. lead and watering and compaction.

Clearing the site. All Joint shall be made tight &

leak free etc.comp.

b) 150 mm dia including rider line 4,700.00 77.68 Rmt

f) 350 mm dia 25.00 185.71 Rmt

3 Only removing recover of existing CI/DI pipe

lines & specials , removing any type of joint,

carting it to the Muni. Store as & where directed

as per instruction of Engg. In charefge with

excavation & refilling.

a) 80 mm Dia 10.00 63.39 Rmt.

b) 100 mm Dia 10.00 64.29 Rmt.

c) 150 mm Dia 10.00 77.68 Rmt.

4 Removing & relaying of existing CI/DI pipe line

& Specials, Cleaning of Pipe & Specials from

inside , inclding excavation refilig etc. Comp. in

Sr. Items Quantity Rate in Unit Amount in

the line & level with any type of joint as per

instruction of engg. In charge.

a) 100 mm Dia 10.00 64.29 Rmt.

b) 150 mm Dia 10.00 77.68 Rmt.

5 Labour charges for installing and jointing Sluice

valve/Scour Valve including loading, transporting

from AMC's store,lowering in location to the

required with excavation refilling alignment by

crane/tripod and chain block including cost of

total nos. of nuts, bolts, Necessary gaskets and

excluding fixing of tail pieces with lead & jute etc

complete as directed by Engg. In charge.

6 Labour charges for removing and recover of ex.

C.I. Sluice valve with tail pieces and carting it up

to muni. Store or site as per instruction of Engg. In

charge item include necessary Excavation

removing or making joints, refilling etc. comp. as

directed by Engg. in charge.

7 Providing and supplying CI/DI Tamper proof /Bi

Stream Air valves with SS 304 Float gun metal

nozzle of approved make & quality of following

class and diameter including all taxes,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the

departmental stores, stacking etc. complete. With

Isolating Sluice Valve PN

8 Lowering, laying & jointing in position following

air Valves including cost of all labour, jointing

material, including nut bolts & giving satisfactory

hydraulic testing, etc. complete. With Isolating

Sluice Valve PN

Sr. Items Quantity Rate in Unit Amount in

9 Labour charges for collecting specials from 5,500.00 21.43 Kg

Municipals store loading, transportation,

unloading to the sie, laying and fixing CI specials

inclusive of all jointing materials like lead, spun

etc. and labour, excavation re-filling and nece.

Dewatering as per instruction of engg. Incharge.

10 Manufacture, Supply,Delivery & Fixing of Ductile

Iron Socket Spigot Bends, tees, reducers or any

other specials as per BS-EN-545/1995 Class-A

series K12 suitable for use with D.I Pipes

manufactured as per IS:8329/1994 delivery of

specials is to be made to GWSSB store or site of

works any where in Gujarat including fixing, all

taxes, loading, unloading, carting,

stacking,insurance, inspection charges, octroi etc.

a) For 100 to 300 mm dia 9,000.00 148.00 Kg

b) Above 300 mm dia 4,500.00 151.00 Kg

11 Providing and casting in situ C.C. in grade M-15 5.00 4,906.00 Cmt

(approx. corresp. to prop. 1:2:4) (proportions as

per mix design or as per Table 9 of IS456 2000 in

masses by weigh batching ) using granite,

quartzite trap metal of size 6 mm to 20 mm for

RCC work, including scaffolding centering, form

work, needle vibrated consolidation, curing comp.

up to 6 meter depth or height (excluding cost of

reinforcement and neat finishing) with centering

and shuttering/deshuttering etc. comp. for

structure for other than water retaining.(With

12 Providing and casting in situ C.C. in grade M-20 5.00 5,520.00 Cmt

(proportions as per mix design or as per table9 of

IS456 2000 in masses by weigh batching ) using

granite, quartzite trap metal of size 6 mm to

mm for RCC work, including scaffolding

centering, formwork, needle vibrated

consolidation, curing complete up to 6 meter

depth or height (excluding cost of reinforcement

and neat finishing) with centering and

shuttering/deshuttering etc. complete for structure

other than water retaining (Below G.L) .(With

13 Supplying cutting, bending, binding and placing in 0.50 77,504.00 MT

position steel as per plan and design and as per

ISS 2502 including cost of steel and binding wire

for reservoirs/structures only including lift up to

Sr. Items Quantity Rate in Unit Amount in

meter height or depth below G.L. for all diameters

Fe - 500 grade for all diameters.

14 Construction of chambers in brick masonary,

locally available in C.M. 1 : 6, foundation

concrete 150 mm thick in C.C. 1:4:8 of trap metal

size 25 mm to 40 mm thick, inside cement plaster

in C.M. 1:3 and cement pointing outside in C. M.

1 :3 & top cover of precast RCC slab 150 mm

thick upto 1 mt. depth from G.L. but excl. cost of

excavation and refilling. With cast in situ RCC

slab in two piece with fixing FRC frame and

cover etc. complete(excluding cost of frame &

cover ) with 23 mm thick brick masonary wall in

C.M.1:6 For Sluice Valve, Air Valve

a) 0.9 x 0.9 x and 1.0 mt. deep chamber 5.00 7,738.00 No.

b) For Extra depth 1.25 4,479.00 Rmt.

c) 1.3 m x 0.9 m x 1 m deep chamber 3.00 9,389.00 No.

d) For Extra depth 1.50 5,282.00 Rmt.

e) 1.3 x 1.3 x and 1.0 mt. deep chamber 2.00 11,351.00 No.

f) For Extra depth 2.00 6,084.00 Rmt.

15 Providing and fixing PVC coated steps as per 25.00 66.96 No

16 FRC Manhole Cover Providing F.R.C. MH seat 5.00 2,125.00 No

cover incl. carting to the work site etc. comp.

Directed. F.R.C. Extra Heavy Duty (EHD-35)

Manhole Covers & Frames Cover: 728mm ø &

100 mm thick circular cover, 35.00MT load

design,100 x 2mm MS flat all round,16mm ø plain

round bar for lifting the cover & should be fitted

with plastic cups. Frame:560mm ø clear opening,

-888 x 888 x 175mm. On the upper periphery off

rame 25x3 mm wide MS flat should be well

embed in concrete to protect the edges off rame.

FRC E.H.D.-35 manhole cover & frame described

17 FRC heavy duty cover size 730 mm. & 90 mm 5.00 1,080.36 No

thick circular cover 20 M.T. design load and

frame size 560 mm clear opening size 890 x 890 x

18 Carting and Fixing M.H., Chamber or Catchpite 10.00 750.00 No

Seat and Cover in line and level to match

exisisting road level in C.C. 1:2:4 and finishing

smooth, watering and protecting for 7 days etc.

complete as directed. M.H. seat cover will be

supplied byA.M.C.(from any store) (Based on

Drainage SOR 2009-10)

Sr. Items Quantity Rate in Unit Amount in

19 Filling with available excavated earth (excluding 100.00 129.10 Cmt

rock) in trenches, plinth, sides of foundation in

layers not exceeding 20 cm in depth consolidating

each deposited layer by ramming and watering.

20 Conveyance charge of earth, lime, murrum, 250.00 408.41 Cmt

building rubbish, manual garbage, sludge,

excavated rock, fly ash, aggregate of any kind etc.

Upto 5.0 Km lead.

21 Extra rate over item of excavation of earth for

excavation of asphalt pavement/RCC of following

thickness including demolishing the asphalt

carpet, metal, soiling/cutting Reinforcement etc.

comp. with stacking the material as directed.

(a) up to 0.20 meter thickness (By Manual) 12,000.00 71.43 Smt

(b) up to 0.30 mt (by any type of Breaker Machine or 2,500.00 178.57 Smt

R.C.C Cutter machine including cost of operator,

fuel & transportation etc complete.

(c) 0.30 mt & above (by any type of Breaker 2,500.00 312.50 Smt

Machine or R.C.C Cutter machine including cost

of operater, fuel & transportation etc complete.)

22 Reinstatement of asphalt road/pavement using 17,000.00 231.47 Smt

same material for soling and new metalling

grouting with tack coat etc complete as directed.

23 Cutting of existing pipelines of following

diameters including carting of nece. specials from

AMC store to site and from site to AMC store

(recovered materials) nace. labours for excavation,

jodan & backfilling fitter, supervisor, etc.

complete. Rate also includes electric cutter,

dewatering pump fuel and transportation of

machineries, chain pulley block if requires

working at an instructed specific time of day or

night etc. complete.

a) 100 (CI/DI) mm dia. 5.00 1,446.43 No

b) 150 (CI/DI) mm dia. 5.00 1,464.29 No

c) 200 (CI/DI) mm dia. 5.00 2,455.36 No

d) 250 (CI/DI) mm dia. 5.00 3,169.64 No

e) 300 (CI/DI) mm dia. 5.00 5,142.86 No

f) 350 (CI/DI) mm dia. 3.00 5,544.64 No

g) 400 (CI/DI) mm dia. 2.00 6,598.21 No

h) 450 (CI/DI) mm dia. 1.00 10,187.50 No

i) 500 (CI/DI) mm dia. 2.00 11,580.36 No

j) 600 (CI/DI) mm dia. 1.00 14,285.71 No

24 Brick work using common burnt clay building bricks 10.00 4,011.66 Cmt

having crushing strength not less than 35 kg / Sq.

Cm. in foundation and plinth in cement mortar 1:5

(1 cement : 5 coarse sand) etc. complete

Sr. Items Quantity Rate in Unit Amount in

25 Providing & applying . 15 mm. thick cement 50.00 222.56 Smt

plaster in single coat on rough side of single or

half brick wall for interior plastering upto floor

two level and finished even and smooth in Cement

mortar 1:3 (1 cement : 3 sand) etc. comp )

26 Demolition of Brick work & stone masonry 25.00 544.95 Cmt

including stacking of serviceable materials and

disposal of unserviceable materials with all lead

and lift. (i) In cement Mortar.

27 Demolition and disposal of unserviceable 20.00 603.23 Cmt

materials with all lead and lift.(i) Unreinforced

cement concrete.

28 Demolition and disposal of stacking of serviceable 25.00 1,047.38 Cmt

materials and disposal of unserviceable materials

with all lead and lift

29 Supplying Electric breakar machine for RCC slab 25.00 1,071.43 Shift

or Asphalt demolishing work on site by using

operator, fuel, power supply etc. complete as

directed.(no payment should be allowed for non

working condition of machinary and for pipeline

excavation and M.H. work.allowed only for break

30 Providing and supplying JCB machine on rental 25.00 535.71 hr

basis in case of imergency situation and break

down type work and also during on unavodable

condition as per instruction of engineer incharge,

rates include all necesary shifting, fuel and

operating charges and staking o usefull and non

usefull material separatly up to store.(no payment

should be allow for non working condition of

machinary and for pipe line excavation and laying

work) (based on previously approved rate by C

E Sir) (ARC 2022-23 Approved Rate)

31 Supplying, fabricating and embedding M.S. 250.00 82.50 kg

anchor bolts, channels, angles chequered plates (6

mm thick), all other type of inserts, ladder,

precast trench cover etc. in concrete members

during concreting as per drawings and instructions

in all positions and at any level including keeping

them in correct position and alignment, including

adjustment of reinforcement and shuttering, etc.

complete and including two coats of approved oil

paint over one coat of zinc-rich primer over

exposed surfaces of above mentioned inserts after

embedment, etc. all as specified

Sr. Items Quantity Rate in Unit Amount in

32 Manufacture, Supply & Delivery, Laying of

Electric Resistance Welded (Up to 400mm)/

Submerged Arc Welded(Above 400mm)

M.S.Pipe having beveled ends plate or coil

conforming to IS-3589-2001 or its latest revision/

ammendment for following thickness outside

diameter at GWSSB store or site anywhere in

Gujarat State including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading conveyance to

Departmental stores, stacking etc. all complete.

(Rate forMS Pipe based on the ex. works price of

HR Coil as Rs.54500.00 per MT (Above 3.15 mm

to 10 mm) & Rs. 55000.00 per MT (Above

mm) as on March-21 .( WPI Index of H. R Coil of

February-21 is 132.6)

i) upto 914mm OD & upto 10mm Thickness of 50.00 70.67 Kg

ii) Above 914mm OD & Above 10mm Thickness of 50.00 71.17 Kg

33 Gas cutting ( Either square cut or V cut) pipes,

plates etc. complete for following thickness plate

(a) Above 10 mm thickness plate 50.00 72.00 Rmt.

(b) 5 to 10 mm thickness 50.00 56.00 Rmt.

34 Welding in all positions with required number of

runs, for M.S. pipes internally and / or externally

including gauzing wherever necessary, fixing

appurtenances and other accessories in connection

with pipe laying work as per specification. Butt

joints with convex fillet welds Lag Lengths.

(a) Above 7 mm thickness plate 50.00 729.00 Rmt.

(b) 4 to 7 mm thickness 50.00 681.00 Rmt.

35 Providing and fixing M.S.Flanges to M.S. Pipe as

per IS specification and as directed by Engineer in

(a) Ring flange - M.S.Special Flanged ends

(i) Upto 300mm dia. 200.00 98.00 kg

(ii) 300 mm dia and above 100.00 98.00 kg

(b) Blank flange - M.S.Special Flanged ends

(i) Upto 300mm dia. 200.00 98.00 kg

(ii) 300 mm dia and above 100.00 98.00 kg

36 Dewatering by pumping set of required capacity 300.00 18.32 HP/hr

including temporary platform carting pumping at

site and fixing the same in position including all

accessories, and fuel and labour etc. complete.

Sr. Items Quantity Rate in Unit Amount in

37 Making holes on existing C.I./ D.I./MS water pipe

line including necessary GI fittings item also

includes necessary excavation, dewatering and

refilling as per instruction engg. In charge etc.

38 Supply , installation , testing & commissioning of 2.00 1,412.00 No

Bourdan pressure gauge having 150 mm dia with

necessary syphon & S.S. cock and shall be

provided at each pump outlet & pump header as

per specification and data sheet. Range 0-

39 Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

following nominal bore, tube fitting and clamps

including making good the wall ceiling and

floor.((At any floor level)

(a) 15 mm dia GI Pipe 5.00 244.13 Rmt.

(b) 20 mm dia GI Pipe 5.00 297.25 Rmt.

(c) 25 mm dia GI Pipe 5.00 393.93 Rmt.

(d) 40 mm dia GI Pipe 5.00 596.73 Rmt.

(e) 50 mm dia GI Pipe 5.00 779.60 Rmt.

40 Providing and laying in trenches galvanised mild

steel tubes (Medium grade)of the following

nominal bore, tube fittings (Earthwork in trenches

to be measured and separately)

(a) 15 mm dia GI Pipe 5.00 150.91 Rmt.

(b) 20 mm dia GI Pipe 5.00 190.97 Rmt.

(c) 25 mm dia GI Pipe 5.00 279.39 Rmt.

(d) 40 mm dia GI Pipe 5.00 421.12 Rmt.

41 Providing laying and jointing in true line and level

following Dia U.P.V.C. Pipe (SCH-40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

a) 15 mm Dia uPVC Pipe 20.00 71.93 Rmt.

b) 25 mm Dia uPVC Pipe 20.00 90.93 Rmt.

c) 40 mm Dia uPVC Pipe 20.00 146.65 Rmt.

d) 50 mm Dia uPVC Pipe 20.00 193.73 Rmt.

Sr. Items Quantity Rate in Unit Amount in

42 Manufacturing, testing, supplying, loading,

transporting to worksite, unloading, Loweing in

trenches, laying and jointing RCC pipes following

class with Socket and spigot joints as per IS 458 -

2003 including EPDM Rubber ring as per IS

5382-1985 etc. comp. As Directed by Engineering

(iii) 600 mm dia. 5.00 1,268.75 Rmt.

43 Providing And Jointing Stoneware Pipes Incl.

Excavation Up to 2 Mt. Refilling, Transporting

Pipes To Work Site, Unloading, Lowering In

Trench, jointing material Such As Cement, sand,

Hemp Bitumen As Directed, Incl. Watering The

Trenches Spreading And Carting away Of Surplus

material as directed by engineer in charge.

(ii) 150 mm dia 15.00 163.39 Rmt.

(iii) 230 mm dia 25.00 344.64 Rmt.

44 Repairing of damaged MH including removing

damaged brick & repairing by masonry in C.M.

1:5 & plaster in C.M.1:3 & fixing C.I. Steps &

excluding seat & Cover in C.C.1:2:4 rate also

includes removing debris from MH & carting the

same as directed.

a) Up to 0.15 M ( @ two coarse) 10.00 732.14 No

b) Up to 0.35 M ( @ two coarse) 15.00 1,160.71 No

c) Up to 0.65 M ( @ two coarse) 5.00 1,794.64 No

45 Providing, laying, spreading and compacting

graded stone aggregate to wet mix macadam

specification including premixing the Material

with water at OMC in mechanical mix plant

carriage of mixed Material by tipper to site, laying

in uniform layers in subbase / base course on well

prepared surface and compacting with vibratory

roller to achieve the desired density as per

(a) Production & Supply of WMM 500.00 1,495.54 Cmt

(b) Laying of WMM 500.00 31.25 Cmt

46 Providing and Laying of Rubber Moulded Paver 50.00 383.04 Smt

Block Grey/Coloured 60 mm thick, M-35 Grade

of any size shape (Usually Uni-Paver Blocks)

using black trap good quality aggragate of 20 mm

nominal size for footpath, parking areas, service

lanes and other areas as mentioned in the rawing /

Sr. Items Quantity Rate in Unit Amount in

instruction of engineer in charge. Cost includes

formworks using rubber mould, Rate providing

and laying paver blocks as per required grading

and specification. The paver block shall be

mechanically compacted. The work of paving

blocks shall be executed in line and level by skill

mason of flooring work only. It should be laid in

such a way that the no cutting of the paver block

to be necessary. if cutting of paver block

necessary then it should be cut byvmachine only

and carting. The finished surface of the paver

block shall have resonably good, plain finished.

Paver blocks shall be compacted and shall be

relaid if necessary. Gravel or such type of

materials shall not be allowed for production.

Laying on 5 cms thick sand bedding.)

47 Supplying and fixing of 300 mm-L x 150 mm-B x 50.00 350.89 Smt

380 mm-Kerb block for Footpath in M-20 grade

using 20 mm nominal size black trap aggregate of

Sevaliya/Timba or equivalent quality for pre-cast

blocks, reasonably exposed finish/ formwork

mould with well equipped with vibratory system

for kerb stones of approved design including

curing, etc. complete, including the cost of

formwork etc. complete. The rate shall also

include necessary cutting of asphalt, fixing the

Kerb stones in line and level on 5 cm thick sand

bedding with necessary equipments and materials.

The rate shall also include the flush pointing in

CM (1:3) for all joints of the kerbstones. Filling of

zari alone the sides of the kerb stone fixed with

Bituminous concrete Bituminous concrete / C.C.

mixed in proper position to flush with the road

surface as directed by Engineer in change to form

a portable mixture.

48 Labour work for fixing above interlocking blocks 50.00 69.64 Smt

on up to 50mm th sand bedding,levelling,watering

anf fixing. Rate incl. average 30cm depth for

excavation and or filling,carting away

debries/excavated material up to 5 km and

cleaning the site etc.comp. as directed.

49 Labour charges for doing washout of water pipe 50.00 669.64 No

line at end including necessary excavation

refilling the pit. Allowing the water to flow for

minutes twice or thrice as per site condition during

supply hour, dewatering the pit and plugging with

existing wooden butch. etc. comp. as per Engineer

Sr. Items Quantity Rate in Unit Amount in

50 Supplying wooden taper plug from jungly wood

(like limda, ambo ) etc. comp.

(a) 15 mm dia to 20mm dia 100.00 13.39 No

(b) 25 mm dia to 37mm dia 25.00 17.86 No

( d) 80 mm dia to 100 mm dia line 20.00 312.50 No

51 Barricading the entire break down or excavated 100.00 80.36 Rmt.

area on rental basis using wooden ballies /

M.S.angles at max. 2.00 meter centre to centre,

C.G.I. Sheet, reflective paint / Board out side to

avoid accident & for smooth traffic diversion &

movement including cautionary board etc. Item

also includes for making temporary sufficient nos

of lighting arrangement through out the work with

necessary required arrangement. ..The same shall

be removed after completion of work. (Only for

break down work from start to complete)

52 Labour Charges for repairing the joint leakage in

the existing C.I./DI Pipe line with specials incl.

required materials such as jute and lead etc , nece.

excavation in any type of soil, refilling, nacessary

trust block etc.comp. as per instruction of engg.in

charge.(Joint reparied under this item should not

be paid in next four months under normal

(A) 80 Mm dia. to 100 MM dia 5.00 379.46 joint

(B) 150 Mm dia. to 250 MM dia. 5.00 446.63 joint

Manufacture,supply & delivery of Electric resistance 110.00 8,774.00 Rmt

welded up to 400 mm) /submerged Arc Welded

(above 400mm) M.S. Pipe having beveled ends plate

or coil conforming to Is-3589-2001 or its latest

revision/ammedmebt for following thickness outside

diameter at Gwssb store or site anywhere in gujarat

state including all taxes ,insurance, transportation,

feightcharges , octroi inspection,charges ,loanding,

unloading conveyance to departmental stores

,staking etc all complete(Rate for MS pipe based on

the ex. works price of HR coil as Rs. 58500 pet MT

-without Gst (Above 3.15mm to 10 mm ) & Rs.

59000.00 per MT without Gst (Above 10 mm ) as on

Jan-23(wpl Indexof H.R. Coil of Dec-22 is 144)

I/S Solvent free Liquid epoxy Lining (406

micron)+O/S 3 LPE Coated M.S. Pipe (As per

Revised gwssb sor 2022-23)

610 pipe dia in OD ( mm )Thickness 6.3 mm

Sr. Items Quantity Rate in Unit Amount in

54 Filling in plinth with sand under floors incuding 25.00 406.81 Cmt

watering, ramming, consolidation and dressing

55 Filling in foundation and plinth with murrum or 25.00 255.54 Cmt

selected soil in layers of 20 cm. Thickness

including watering, ramming and consolidating

Signature of Contractor Additional City Engineer (East Zone)

Name : Ahmedabad Municipal Corporation

Company’s seal :