Widenning and Strengthning in 4 Lane of Mohansarai P. Dindayal Upadhayay Nagar Chakia Road (SH) In Km-32.235 to 46.00 In District Chandauli

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m.(Including all taxes, labour cess, T&P and material but Excluding GST)

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction (Including all taxes, labour cess, T&P and material but Excluding GST)

Removal of uservicable soil including excavation, loading and disposa upto 5 km leed but excluding replacement by suitable soil which shall be paid secnratelyas ner clause 305(Including all taxes, labour cess, T&P and material but Excluding GST)

Construction of embankent with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requitement of table 300-2(Including all taxes, labour cess, T&P and material but Excluding GST)

Construction of embankent with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requitement of table 300-2(Including all taxes, labour cess, T&P and material but Excluding GST)

Construction of sub grade and earthen shoulders with approved material obtained from borrow pits area lead up to 5 km with all lifts & leads, transporting to site, speading, grading to required slope and compacted to 97% proctor density reuirement of the table No. 300-2 MORTH sfecification no 305(Including all taxes, labour cess, T&P and material but Excluding GST)

Construction of granular sub-base by providing close graded material, speading in uniform layers with motor grader on prepared surface. Mising by mis in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density complete per clause 401(Including all taxes, labour cess, T&P and material but Excluding GST)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density(Including all taxes, labour cess, T&P and material but Excluding GST)

Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in machenical mix plant carriage of mixed material by tipper to site, laying of 1% OPC cement and 3.5% emulsion in uniform layers with paver in sub-base / base Course on well prepared surface and compacing with vibratory roller to achieve the desired density. (Including all taxes, labour cess, T&P and material but Excluding GST)

Recycling pavement by cold milling of existing bituminous layers, planning the surface after cold milling, reclaiming excavated material to the extent of 30 per cent of the required quantity hauling and stock pilling the reclaimed material near the central recyclling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required. mising in a hot mix plant transporting and laying at site and compactimg to rthe required grade level and thickness all as specified in clause 519(Including all taxes, labour cess, T&P and material but Excluding GST)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder (VG- 40) @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. (Including all taxes, labour cess, T&P and material but Excluding GST)

Providing and applying tack coat with bitumen (VG10) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.(Including all taxes, labour cess, T&P and material but Excluding GST)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading. premixed with bituminous binder (VG-40) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects . (Including all taxes, labour cess, T&P and material but Excluding GST)

Providing, fencing and erecting 50 mm dia painted steel pipe railing in 3 rows on precast M20 grade RCC vertical posts 1.8 metres high (1.2 m above GL) with 3 holes 50 mm dia for pipe, fixed 2 metres centre to, complete as per approved drawing. (Including all taxes, labour cess, T&P and material but Excluding GST)

Earth Work in Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408 . (Including all taxes, labour cess, T&P and material but Excluding GST)

Painting of median with two coats synthetic enamel paint in all shades on new concrete surface after filling earth in median as per MORT&H specificaiton No 14.16.(800).(Including all taxes, labour cess, T&P and material but Excluding GST)

Removal (including stacking and proper handling over to concerned Authority) of stumps and roots of trees having girth 300mm! and backfilling the pit created to required compaction complete as per technical specifications clause 201 and 305, or as directed by the engineer, for girth size above 300mm . (Including all taxes, labour cess, T&P and material but Excluding GST)

Dismantiling of existing structures like culvert bridges retaining walls and other structure comprising of masonry. Cement concrete wood work steel work including T&P and scaffolfing wherever necessary sorting the dismatled meterial disposal of unserviceable material and stecking the serviceablematerial with all lifts and lead of 1000 metres. (Including all taxes, labour cess, T&P and material but Excluding GST)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Brick Masonry Work in Cement Mortar 1:4 in Superstructure complete excluding Pointing and Plastering, as per Drawing and Technical Specifications..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

M-20 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

RCC Grade M 25 using batching plant & manual placing..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

RCC Grade M30 using batching plant & manual placing.As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

RCC Grade M35 using batching plant & manual placing .As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

RCC Grade M35 using batching plant & manual placing Roft foundation.As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Removing all type of hume pipe and stacking lead of 1000 meter including earthwork and dismentling of massonry work. As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

M.S.Iron work in angle iron for joint including supply of materials T& P etc required for proper completion of work size 100x100x8 mm S.I.No.503 (A) .As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Providing and laying boulders apron on river bed for protection against scouring with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification .As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Drainage Spouts complete as per drawing and Technical specification Sr.No.14.09 (2705) .As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Sand Filling in Foundation Trenches as per Drawing & Technical Specification Sr.No 12.30 (304) ..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Painting or varnishing new work in small area or new wood with one coat (up to one sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mix paint of clear synthetic varnish including supply of materials labour and T&P etc. required for proper completion of work. Paint to be used should confirm to the ISI No. 103 1950. As per S.I.No.641+642 and colouring as per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications..As per direction of E/I (Including all taxes, labour cess, T&P and material but Excluding GST)

M/s Alok Construction