Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹30.6 L
EMD Value
₹31,000
Closing Date
18 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Dang - Ahwa
Construction Kakshala Village Aamli Faliya TO Jamia Towards Road km 0/0 To 1/000 Tal, Subir Dist:- Dang.
362662
23 OF 2026 - 27
Open
Civil Works - Roads
Works
Dang
8 documents required · 7 mandatory · 1 optional
₹1,500
Executive Engineer, Panchayat (R & B) Division, Ahwa
₹31,000
4 Nov 2026
4 Nov 2026
4 Nov 2026
18 Nov 2026
4 Nov 2026
90 days
It. Rate In
Specification and reference to book of Quantity Unit Amount
No. Figures
specifications)
1 Clearing and grubbing road land including 0.30 Hect 34889.37
uprooting rank vegetation grass
bushes,shrubs,sapling and trees girth up to
mm removal of stumps of trees cut earlier and
disposal of unserviceable materials(D) By
mechanical means in area of thorny jungle
2 Earthwork in cutting in all sorts of soil and soft 480.00 Cum. 112.02
murrum including conveying and putting the stuff
in spoil bank maintaining minimum distance of
five meter between top edge and cutting and toe
of spoil bank.
3 Supplying and fixing reinforced concrete heavy 30.00 rmt 1968.38
duty non-pressure pipes with collars for culverts
carrying heavy traffic as per IS 458-1991
specifications including setting the pipes in C.M.
1:2 watering and laying (to level or slopes) of
class NP3 of following internal daimeters.(v)
600mm dia.
4 Earthwork for embankment including breaking 979.10 Cum. 182.14
clods, dressing with all lead and lift and including
watering rolling and consolidation of subgrade in
layers at O.M.C. to required dry density including
filling the depression which occur during the
process using power roller 8T to 10T.(E) From
Borrow area within 3.0KM. lead
5 Supplying, Stacking, Spreading & rolling of Hard 120.00 Cum. 690.64
Murrum on road side for hard side shoulder of
work as per specification including filling the
mesure boxes of standard size etc. complete.
6 Construction of granular sub-base by providing 399.00 Cum. 778.49
coarse graded material grading-II, spreading in
uniform layers with motor grader on prepared
surface, mixing by mix in place method with
rotavator at OMC, and compacting with vibratory
roller to achieve the desired density, complete as
per clause 401.B
7 Construction Of Granular Sub Base by providing 369.00 Cum. 832.49
coarse graded machine crushed B. T. material
satisfying MOST Specification Of Grading • I
using 53 mm to 26.5 mm @ (M.C. Metal),
mm to 4.75 mm @ 600/0 (M_C.Metal), 2.36 mm
below @ (Stone Dust) including spreading in
unifornt layer with motor grader on prepared
surface, mixing by mix in place method with
rotavator at OMC and compacting With vibratory
roller to achieve the desired density with C.B,R. >
etc. complete.
8 Providing, laying, spreading and compacting 509.00 Cum. 918.41
graded stone aggregate to Wet Mix Macadam
specification including premixing the Material with
water at OMC in mechanical mix plant carriage of
mixed Material by tipper to site, laying in uniform
layers with paver in sub- base / base course on
well prepared surface and compacting with
vibratory roller to achieve the desired density.
9 Providing and applying evenly Priming coat with 3092.00 Sqmt 43.19
emulsion asphalt at the rate of 7.50 Kg/ 10 Sq.m
on road surface using emulsion SS-1 (Himcol
Made) pressure spreayer etc. complete including
the cost of asphalt
10 Providing and laying bituminous base course 231.90 MT 2240.26
37.5mm thick compacted in one layer with tack
coat of Emulsion RS1 at the rate of 2.5 Kg /
Sqmt. and using B.T. stone aggregate or required
gradation and asphalt (VG-30) grade for mixing
@ 1.99 % by weight of total mix for mixing
including heating the aggregate and asphalt by
drum mix plant and spreading the same by paver
finisher and consolidation with vibratory roller
including providing all meterials, equipments,
tools and plants, oil, kerosene, fire wood, labour
chrges etc. complete..
11 Providing laying & rolling of 25 mm thick Open 162.30 MT 2882.47
graded Premix bituminous carpet with B.T.
aggregate as specified and using Emulsion RS1
for tack coat at the rate of 2.5 kg/10 sq.mt. and
using bitumen grade VG-30 for Mixing with
aggregate at the rate of 3.36 % i.e. 33.60 kg /
M.T. of total mix including heating and mixing in
drum mix plant transporting and spreading the
same with paver finisher and consolidation with
vibratory roller including necessary fire wood , oil
lubricant , labour charges etc. using contractor's
own drum mix plant and equipment ,tool etc
.complete in accordance with the requirement of
specification.
12 Providing and laying seal coat with B.T. 83.50 MT 3158.88
aggregate as specified using aggregate at the
rate of 0.18 Cu.mt./10 Sq. mt. and bitumen
grade VG-30 for mixing with aggregate at the rate
of 4.5 % i.e. 45.00 Kg. / M.T. of total mix including
heating and mixing in drum mix plant and
transporting and spreading the same by paver
finisher and consolidation with vibratory roller
including necessary fire wood , oil , lubricant
labour charges using contractor's own drum mix
plant, machineries and equipment tools etc.
complete in accordance with the requirement of
specification .
13 Providing and laying asphalt painting on B.T. 3092.00 Sqmt 32.58
surface with bitumen VG-30 at rate 5.00Kg /
10Sq.mt. including spreading stone dust for
painting surface at rate of 0.03 cu.mt. / 10 sq.mt.
14 Providing and fixing ordinary Kilometer stone of 2.00 Nos. 704.33
precast C.C. 1:2:4 including necessary
reinforcement as per I.R.C. type design in C.C.
1:4:8 including painting,lettering etc. complete
(For O.D.R and V.R.)
15 Providing and fixing Hectometer as per I.R.C. 4.00 Nos. 356.50
type design including painting, lettering etc.
complete.(ii) Fixing in C.C. 1:5:10
16 Informatory Signs :-Providing and fixing sing 1.00 Nos. 3856.90
boards made out of 2mm aluminium sheet; size
80 x 60cms. rectangle as per the design of IRC-
67-1977 pre treated with phospheting process &
acid teching; coated with one coat of epoxyprimer
and two coats of best qualityepoxy paint;
reflectorised with retro refiective sheeting as per
latest M.O.S.T. Specifications; 3.1m long stand
postand frame fabricated from suitable sizeiron
angle of 35 x 35 x 3mm75x75x6mm as required;
painted with best qualityepoxy coatings in black
and whitebends. the details of symbol for
eachboard shall details of symbol for eachboard
shall be as per the instruction ofengineer in
charge. The fixing at site shall be in 1:2:4 CC
block of size 45 x45 x 60cms. for each leg.
including excavation curing tec. complete under
the supervision of engineer in charge.(A)
Engineer Grade(VR)...
17 Logo Board:- Providing and fixing Logo Board 1.00 Nos. 4545.00
made out Of 2mm aluminium sheet, as per the
drawing & design. pre treated with phospheting
process and acid etching coated with one coat of
epoxy primer and two coat of best quality epoxy
paint, refloctrorized With retro reflective sheeting
as per the latest M.O.S.T. slw•cification, 3.1 Mt.
long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3 mm, 75 x
75 x 6 mm as required painted with best quality
epoxy coatings in black and White bends. The
details of symbol for each board shall be as per
the instruction Of engineer in charge. The fixing
at site shall be in CC of size 45 x 45 x 60 ctns for
each leg, including excavation curing etc.
complete under the supervision Of
(A)Engineer1ng grade
18 Village name/ Bump Ahed sign :-Providing and 1.00 Nos. 5045.36
fixing sing boards made out of 2mm aluminium
sheet; size 90 x 60cms. rectangle as as per the
design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro
refiective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be
as per IRC-30-1968, 3.1m long (2 nos) stand post
and frame fabricated from suitable size iron angle
of 50 x 50 x 5mm painted with best quality epoxy
coatings in black and white bends. the details of
symbol or inscription / numerals for each board
shall be as per the instruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC
block of size 45 x 45 x 60cms. for each leg.
including excavation curing etc. complete under
the supervision of engineer in charge.(A)
Engineer Grade(VR)...
19 Road marking with hot applied thermoplastic 16.00 Sqmt 367.72
paints With reflectorising glass beads on bitumin
surface providing and laying a hot applied
thermoplastic compound 2.5 mm thick including
reflectorising glass beads @ 250gms per sqm
area, thickness Of 2.5mm is excludingof surface
applied glass beds as per [RC:35- 2015, finished
surface to be level, uniform and free from streaks
and holes. zebra patta "bump patta lane,'ccnter
line/ edge line/cut patta. The white color marking
should provide liminance coefficinet on ccmend
road shalll be min 130 mcd/m2/lux and Asphalt
road shall be min 100 mcdJm2Jlux during the
service lifeduring the day time. The marking
should meet the performance criteria for night
time reflectivity, wet reflectivity and skid
resistance as mentioned in the section-15 Of IRC
35-2015. Warranty for the Retro reflectivity
should be two
20 Cat Eye / Road Stud RPM: Supplying of Molded 27.00 Nos. 217.40
Twin Shanks Raised Pavcmcnt Markers made of
polycarbonate and ABS moulded body and
reflective panels with micro prismatic lens
capable ofproviding total internal reflection of the
light entering the lens face and shall suppoll a
load Of 13635 kgs. tested in accordance to
ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular
The height, width and length shall not exceed
20mm, 130 mm and 130 mm and with minimum
reflective area of 13 Sqem on each side and the
slope to the base shall be 35 5 degree. The
strength Of detachment Of the integrated
cylindrical shanks, (or diameter not less than
19+6 2 mm and height not less than 30+6 2 mm)
from the body is to be a minimum value of
Kgf. Fixing will be by drilling holes on the road for
the shanks to go inside, without nails and using
epoxy resin based adhesive as per
manufacturers recommendation and The color Of
the marker should be as per the IRC 35-2015 and
as directed by Engineer-in-charge.
21 Cautionary Warning Sign *Providing and fixing 4.00 Nos. 3808.66
sing boards made out of 2mm aluminium sheet;
size 90 x 90 x 90 cms. equilateral triangle as per
design of IRC-67-1977. Prc treated with
phospheting process & acid etching; coated with
one coat of epoxy primer and two coats Of best
quality paint ;reflectorised With retro
refiectivesheeting as per latest
M.O.S.T.Specifications; 3.1m long stand postand
frame fabricated from suitable sizeiron angle of
35 x3S x 3mm, 75 x 75 x 6mtn as required;
painted with bestquality epoxy coatings in black
andwhite bends, Ille details of symbol foreach
board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in CC blockof
size 45 x 45 x 60 Cms, for each leg.including
excavation, curing ete.complete under the
supervision of engineer in charge.(A) Engineer
22 Chevron sign :-Providing and fixing sign boards 6.00 Nos. 3711.75
madc out of 1.5mm aluminium sheet 3mm ACP
(Aluminum composite Panel); Size 60x50cm
rectangular as per design of IRC-67-2012. pre
treated With phospheting process & acid etching,
coated with one coat of epoxy primer and two
coats of best quality epoxy paint ; reflectorised
with High Intensity Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956
and latest MOS.T,Specifications; 3.3 mtr long
stand post Of Iron Angle 75 x75 x 6tnrn f 6SNB
Circular MS Pipe as required and frame
fabricated from suitable size iron angle
Of35x3Sx3mm; painted with bestquality epoxy
coatings in black and white bends. the details of
symbol or inscription / numerals for cach board
shall be as per the instruction of engineer in
charge. The fixing at site shall be in I CC block-of
size 45 x 45 x 60 CMS. for each leg including
excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for
7 years for the Retro reflective sheeting from
original manufacturer & a certified Copy Of 3 year
outdoor exposure test report from thirdpalty test
lab for the product offered shall be
23 Regulatory/Mandatory signs :Pmviding and fixing 4.00 Nos. 3439.81
sing boardsmade out Of 2tnm aluminium sheet;
size 60cms. diameter circle asper the design of
IRC•67-1977 pre treated With phospheting
process & acid eteching; coated with one coat of
epoxy primer and two coats of best quality epoxy
paint; reflectorised with retro refiective sheeting
as per latest M.O.S.T. Specifications; 3.1m long
stand post and frame fabricated from suitable
size iron angle Of 35 x 35 x 3mm75x7Sx6mm as
tequired; painted with best quality epoxy coatings
in black and white bends. the details of symbol
for each shall be as per the instruction Of
engineer in charge. The fixing at site shall be in I
CC blcwk of si7ß 45 x 45 x 60cms. for each leg.
including excavation curing etc. complete under
the supervision Of engineer in charge.(A)
Engineer Grade(VR)
24 STOP SIGN:-Providing and fixing sing boards 6.00 Nos. 4676.06
made Out of 2mm aluminium sheet; size 90 x
90cms. as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching;
coated with one coat Of epoxy primer and two
coats Of best quality epoxy paint; reflectorised
with retro reflective sheeting as per latest
M.O.S.T_ Specifications; 3.1m long stand post
and frame fabricated from suitable size iron angle
of 35 x 35 x 3mm 75x75x6mm as required;
painted with lxst quality epoxy coatings in black
and white bends. the details Of symbol for each
board shall be as per the instmction of engineer
in charge. The fixing at site shall be in CC block
of size 45 x 45 x for each leg. including
excavation curing tec. complete under the
supervision of engineer incharge.(A) Engineer
Grade(VR).
I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be
written in figures and words) of the estimated rate mentioned above Amount of my / our tender works
*Estimated amount put to tender *Estimated amount put to tender
Deduct ……. % below Rs…………………… Add ………........% Above
Net Rs. …………………….… Total Rs. ………….…….................
In words ………………….……………………………. In words ………………….……………………….
*( please strike out whichever is not applicable)
1 The Contractor shall exhibition board with detailed specification and details of works directed by
the Engineer – In – Charge for which no extra payment shall bemade.
2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills.
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt
G.R.: PRC-10/2017 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where the reisa change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate mentioned
in all the tender.
Deputy Executive Engineer Executive Engineer
Panchayat ( R & B) Sub Division Panchayat (R & B) Division
Ahwa Dang
Signature of the contractor
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ Kakshala Amali faliya.pdf
GR - SBD with Index JJES_compressed.pdf
SBD Kakshala Amli Faliya.pdf
Specification.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .