Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹27.4 L+₹4.0 L (17.3%)Rejected-Finance | L2 | Rejected-Finance Second Lowest | |
| 3 | L3₹27.6 L+₹4.3 L (18.5%)Rejected-Finance | L3 | Rejected-Finance Third Lowest | |
| 4 | L4₹31.0 L+₹7.7 L (32.9%)Rejected-Finance | L4 | Rejected-Finance Fourth Lowest |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
21 Jun 2022, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt, Palampur
CERTAIN B AND R REPAIRS AND REPLACEMENT OF ZONE A AND B AT ALHILAL MIL STN
2022_MES_525936_1
GEP/ - /2022-23
Open Tender
Civil Works
Item Rate
180 days
Alhilal Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Palampur
₹60,000
Yes
27 Jun 2022
24 May 2022
23 Jun 2022
24 May 2022
21 Jun 2022
7 Jun 2022
60 days
Amount
Taking down chowkats or frames including shutters (without taking off shutters from the frames) n.exc. 1.50 sqm each, and removing from site, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each and removing from site, complete all as spfd and directed.
Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete.
Refixing shutters in the same opening and of any discription exc 1sqm but n. exc 2 sqm each.
M&L pressed steel frames of size 165mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.
M&L pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.
M&L mild steel hold fast & similar articles confirming to Fe-290 Gde E-165 complete.
M&L plain cement concrete, M-15 (Nominal mix), type B-0 (using 12.5mm graded crushed stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc.complete all as specified and as directed.
S&F 2nd class hard wood (Sal / Hollock) factory made, plain framed, panelled shutters (two panels) 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35mm thick fitted to chowkats, complete all as spfd and directed.
S&F 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass or gauge, etc. (w/o sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutters S&F to chowkats, complete all as specified and directed.
M&L two coats of synthetic enamel paint over one coat of pink primer, on wood and wooden based surfaces of any description, not other wise described, over 10 cm width or girth of any surfaces complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement S&F in frames at site as per specification and drawing shown in SSR Part-II, complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel Ventilator with top hung shutter including hinges, steel peg stay complete all as specified.
S&F mild steel framed work such as grills , gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and directed.
M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete.
S&F 3mm thick figured glass pin head type and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as specified and directed
S&F stainless steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.
S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.
S&F mild Steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete.
S&F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 2nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc. complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an olour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, facia and fixed with self tapping screws as specified.
S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Grade E-250) complete all as specified and directed.
Dismantilng wall and ceiling boards (fibre, pulp, insulation etc ) or insulation boards / slabs/ blankets any thickness, including cover fillets of any description complete all as specified and directed.
S&F false ceilling of 8mm thick gypsum board tiles of size 600mm x 600 mm fixed with anodised aluminium snap grid frame work for false ceiling including hangers 6mm dia GI adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. Flat 40mm x 3mm size 60mm long and expansion hold fasterns 12.5mm dia, 40mm long complete all as specified and directed.
S&F Clip-in false ceiling system with plain steel beveled edged tile (600mm x 600mm) manufactured out of 0.70mm aluminum sheet having powder coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure postive engagement into the spring clip-in profile allowing for demounting of indivual tiles.The rigid suspension system consists of rows of galvanized steel 0.50 mm thick clip- in profile of size 38mm x 20mm and installed at 600 mm c/c spacing to support the tiles clip-in profiles shall be suspended and jointed form galvanized steel 'C' channels of size 10mm x 38mm x10mm with hold on clamps at spacing as specified by manufacture. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacture instructions and jointed to the 'C' channels. The tiles shall be held in place by pressure clips 'C' at spacing as per manufactures instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20 mm x 30 mm x 20mm and 0.5 mm thick with matching the colour with tiles all as per manufacture specifications/instructions and including necessary scaffolding all as specifed and directed by Engr-in-charge and GE.
Dismantling timber scantling 40 sq cm & over in section, any position in unframed work.
M&L for 2nd class hard wood (Kail) as in scantling and similar work, clean sawn (framed/unframed) timber fixed in position, complete all as specified and directed.
M&L 2nd class hard wood as in verandah posts and similar work, wrought framed timber fixed in position 40 Sqcm and over in section an any position framed or unframed work etc, complete all as specified and directed.
M&L water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a) Taking down existing old tarfelt, bituminous compound including cleaning & removing debris as specified and as directed (b) Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) (c) Preparation & cleaning of fully dried cement concrete surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.30 litres per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric.The over lap shall be minimum 75mm in length side and 100mm with side. Application of polymeric membrane shall be by torch application as specified and as directed. (f) Apply one coat of aluminium paint on roof treatment surface complete all as specified and directed.
M&L for 10mm thick rendering on fair faces of concrete surface in CM 1:3 to be finished even and smooth without using extra cement under roof treatment mixed with water proofing compound as per manufacturer's instructions complete all as specififed and directed. Note: WPC compound shall be measured and paid seperately.
M&L plain cement concrete, M-15 (Nominal Mix), type B-0, (using 12.5mm graded crushed stone aggregates) as in roof kerbs, mud stops, roof padding etc using water proofing compound as per manufacturer's instructions complete all as specififed and directed. Note: WPC compound shall be measured and paid seperately.
Supply only liquid water proofing compound
Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
M&L for joint free (edge cut) coloured glazed ceramic tiles 7mm to 8mm thick of size 300mm x 600mm x 7mm as in skirting/dado etc laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.
M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
M&L for 25mm thick plain cement concrete, M-15 (Nominal Mix) type B-0 (using 12.5mm graded crushed stone aggregates) as in floors finished rough surface to receive floor finisheds, complete all as specified and directed.
M&L for 75mm thick PCC type C-2 using (40mm gradedcrushed stone aggregate) as in sub base of tiling complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block laid in floor with grey cement and no pigment, any shape and size conforming to IS-15658-2006 of 60mm thickness M-40 grade complete all as specified and directed.
M&L 50mm fine aggregate (sand) for cushoning of paver blocks complete all as specified and directed.
S&F Anodised aluminium door shutter of Aluminium section weighing 0.55 kg/m including necessary joinong cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised aluminium anap beading screws etc. complete all as specified
S&F Anodised aluminium window shutter (Two track Glass pane Shutter, Wire mash Shutter) of Aluminium section weighing 0.55 kg/m including necessary joinong cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised aluminium anap beading screws etc. complete all as specified
S&F Anodised aluminium frame for doors, windows, ventilators Aluminium powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed etc. complete all as specified
S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F prelaminated particle board 9mm thick exterior grade decorative choice both side lamination fixed with aluminium frame work complete all as specified
Dismantling of stone slabs and tiles of any description or thickness in floors, aid bedded and pointed in any mortar aprons etc.
M&L 20-25mm thick machine cut kota stone laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) as in flooring/steps, treads/slabs over and including 15mm screed bed or bedding layer in CM 1:4 complete all as specified and directed.
M&L 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar laid over cement screed over 10mm thick cement plaster in CM 1:4 and pointed in white or coloured cement to match the coloured tile complete all as specified and directed
M&L 18 to 20mm thick granite (of any type) tiles, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone incl grinding and polishing complete over 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for non-skid full body coloured glazed ceramic step riser tiles 10mm to 12mm thick (rectangular) polished of size 900mm x 300mm/ 1000mm x 300mm as in step riser etc laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.
Dmolition of stone/brick/concrete block masonry built in Cement mortar complete all as specified.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius, using old size brick, build in CM 1:6, complete all as specified and directed .
M&L for walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted , built in cement mortar 1:6, complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones & dressing to face beds and joints as specified at RR walling uncoarsed or brought upto coarse, max depression on face from straight edge held against the dressed surface n.exc 20 mm granite or trap stone complete all as specified and directed.
M&L for PCC M-15, type B-1(using 20mm graded crushed stone aggregate) as in bed plates, coping, kerbs, lintels & other similar works including weathering slightly rounded or chamferred angles and throating complete all as specified & directed .
Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.
M&L PCC 1:3:6: type C-2 (using 40mm graded crushed stone aggregate) mass concrete of foot path hard standings etc. complete all as specified.
M&L extra forming fain finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped end etc
M&L for plain cement concrete, M-10 (Nominal Mix) type C-1 (using 20mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.
M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M&L RCC M-15 (Nominal mix), type B-1 (using 20mm stone aggre) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like, complete all as spfd and directed. Note: Reinforcement shall be measured and paid separately under relevant item.
M&L form work to sides and soffits of suspended slab, such as roof slab, floor slab, landing and similar work n.exc. 200mm thick (horizontal or sloping) for fair finished surfaces, complete all as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
M&L TMT bar 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking end and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
Taking down cement plaster incl tiles of any description on brick or stone or cement concrete walls incl raking out joints, hacking for key, scrubbing down with water etc, complete all as spfd and directed. Note: Height of Building up to Ground+2
M&L rendering 15mm thick on brick/stone masonry or other than fair faces of brick wall in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed. Note: Height of Building up to Ground+2
M&L for 15mm thick rendering on fair faces of brick work / stone masonry, concrete surface in cm 1:4 to be finished even and smooth with out suing extra cement using WPC as per manufacturing instruction. Note: Height of Building up to Ground+2
M&L rendering 10mm thick on concrete surfaces as in facia or ceiling in CM 1:3 finished even and fair without using extra cement, complete all as specified and directed. Note: Height of Building up to Ground+2
M&L two coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and directed.
M&L one coat of white wash on old surfaces on ceiling including preparation of old surfaces complete all as specified and directed.
M&L two coats of oil bound distemper over a coat of chalk whiting with apply of 2 to 3mm thick wall care putty to smooth surface using of roller on newly plastered wall surfaces complete all as specified and as directed.
M&L two coats of oil bound distemper over a coat of chalk whiting with apply of 2 to 3mm thick wall care putty of smooth surfece using of Roller on old plastered wall surfaces complete all as specified and as directed.
M&L for preparation of new decorated surfaces in walls soffits, facia roof and applying, Two coat of weather proof acrylic based emulsion paint (100% acrylic) as per manufacturer’s instructions etc complete all as specified and directed. Make:-Nerolac (Exel)/Asian Paint (Apex ultima)/ Dulux (weather shield water proof)/Berger (weather coat all guard).
M&L for preparation of old decorated surfaces of walls soffits, facia roof and applying, two coat of weather proof acrylic based emulsion paint (100% acrylic) as per manufacturer’s instructions etc complete all as specified and directed. Make:-Nerolac (Exel)/Asian Paint (Apex ultima)/ Dulux (weather shield water proof)/Berger (weather coat all guard).
M&L for repairing the edges / corner of Chajja / roof projection and similar work by removing of plaster width / girth exceeding 15cm & n exc 30cm and making good with 15mm thick rendering in CM 1:3 to match with including fixing of chicken wiremesh netting on existing surface complete all as specified and directed. Note: Height of Building up to Ground+2
Dismantling of 75/100mm dia cast/PVC drain pipes, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directed.
S&F PVC (SWR) pipes 75mm bore dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore dia, single socketed in any length with rubber ring joints fixed to walls etc including complete all as specified and directed.
S&F PVC (SWR) bends 75mm bore dia complete all as specified and directed.
S&F PVC (SWR) bends 110mm bore dia complete all as specified and directed.
S&F PVC (SWR) branch piece,110 mm bore single (single Y) equal or unequal complete all as specified and directed.
S&F PVC SWR floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) 75mm bore with grating complete all as specified and directed.
S&F PVC (SWR) 110 mm bore vent cowl complete all as specified and directed.
S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling of existing water tank complete all as specified and directed.
S&F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling of existing water tank complete all as specified and directed.
Disconnecting existing tanks of capacity exc. 250 but n. exc. 500 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc. from tanks and from moulds of circulating pipe, etc complete all as specified and directed
S&F in repair vitreous china semi pedestal pattern wash down water closet pan white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one all as specified and as directed.
S&F vitreous china squatting pan water closet, orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe complete all as specified and directed.
S&F vitreous china, wash hand basin with pedastral (white) of size 550mm x 400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper, PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends complete all as specified .
S&F in repairs 10 litres capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete.
S&F PVC Connections 15 mm size with PTMT nuts of length 450mm complete all as specified.
S&F in repairs aluminium anodised tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rawl plugs ,complete all as spfd and directed.
S&F in repairs bib taps 15mm bore cast copper alloy fancy type with crutch or butterfly, handle, screwed down, screwed for iron pipe.
M&L for rendering 15mm thick in cement plaster in CM 1:4 using water proofing compound as in sunken floor complete all as specified and directed. Note: Water proofing compound shall be paid separately.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces complete all as specified and directed.
M&L for bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per sqm per coat complete all as specified and directed.
M&L for polythene film, black, 50 micron laid in floors complete all as specified and directed.
S&F in repairs Pillar taps 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nutsscrewed for iron pipe and fixed
S&F in repairs 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete.
S&F in repairs 25 mm gun metal gate valves screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F swivel shower of PTMT any colour for fixing with 15mm dia pipe (Min weight 40 gms) complete All as specified and as directed.
S&F shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour (Min weight 40 gms) complete all as specified and directed.
Taking up or down 15mm bore dia steel water tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed.
All as per the description of serial item No 120 above but 20mm bore pipe.
All as per the description of serial item No 120 above but 25mm bore pipe.
S&F steel water tubing, 15 mm bore dia, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed.
All as per the description of serial item No 123 above but 20mm bore pipe.
All as per the description of serial item No 123 above but 25mm bore pipe.
Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm complete all as specified and directed.
S&F 18mm thick plywood grade BWR, type BB fixed with screws for shelves, kitchen cupboards etc, to timber frame work or ply wood including 3mm thick teak wood lipping on edge complete. Make: Century/Kitply/Green Ply
Supply & paste 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions Make: Sunmica/Formica/Century laminates
S&F Ist class hard wood plain fillets, square/rectangular, wrought face of sectional area n. exc 3 Sqcm, securing with screw complete.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed
S&F stainless steel cold rolled butt hinges, medium weight, 50mm long, complete all as specified and directed.
S&F in repairs 25mm drapery rod of stainless steel complete all as specified and as directed.
S&F in repair drapery rod brackets both side complete all as specified and as directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for
M/S SAI ENGINEER
BHARDWAJ BUILDERS
VIVEKA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .