SPL REPAIR OF TILES AT T-44, P-18 (MANDIR AND LUNGER) AND BLDG NO T-31, T-32 AND T-67 JCOS LIVING ACCN COOK HOUSE AND DINNING HALL AT PATTAN UNDER GE 969 EWS

Amount

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and as directed.

M & L 2nd Class soft wood (Kail) as in scantling, clean swan timber framed and fixed, complete all as specified and as directed.

All as per above Srl No 5 here-in-before but except timber, complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets, complete all as specified and as directed.

2nd class soft wood 20 mm thick in facia boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed.

S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified and as directed.

All as per Srl No 9 here-in-before but except boarding, complete all as specified and as directed.

M & L 6 mm thick veneered decorative plywood ,grade 1 (with BWR resin) with decorative face veneers on one faces,in wall fixed with screws to timber frame work, complete all as specified and as directed.

M & L 6mm thick veneered decorative plywood ,grade 1 (with BWR resin) with decorative face veneers on one faces,in ceiling fixed with screws to timber frame work, complete all as specified and as directed.

Dismantling timber scantling in fillets rails, posts purlins etc under 40 Sqcm in section in framed work, complete all as specified and as directed.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm, complete all as specified and as directed.

S & F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm, complete all as specified and as directed.

S & F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 graded aggregate) as in floors finished even and fair, complete all as specified and as directed.

M&L for 75 mm thick cement concrete of 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm. in floors set and jointed over and including cement screed base 15mm screed bed in CM (1:6)and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for dark shade Vitrified tiles tiles 9 mm thick (square/rectangular) area of each tile n.exc 0.36 Sqm in floors set and jointed over and including cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match, complete all as specified and as directed.

75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick plastering with CM (1:4), complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site, complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), complete all as specified and as directed.

S&F 30 mm thick 2nd class soft wood glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats, complete all as specified and as directed.

S&F mild steel 100 mm long Butt hinges with galvanised mild steel screws, complete all as specified and as directed.

MS Cold rolled Butt hinges medium weight 75 mm long, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed, complete all as specified and as directed.

S&F Aliminium anodised barrel tower bolts, 150 mm long, complete all as specified and as directed.

S&F Aluminium anodised 150mm pressed handles, oval type ISI marked stove enamelled black complete all as 150mm size, complete all as specified and as directed.

S&F Aluminium anodised handles, cast type anodised 125 mm long, complete all as specified and as directed.

S&F Stainless steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple, complete all as specified and as directed.

Hacking out old broken glass from wooden/metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones, complete all as specified and as directed.

M & L sheet glass ordinary quality 5.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames, complete all as specified and as directed.

All as per item No 38 above but pin head type, figured glass, complete all as specified and as directed.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc.

Refixing old 15mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc), complete all as specified and as directed.

Refixing old 20mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc), complete all as specified and as directed.

S&F 15mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed.

S&F 20mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed.

S&F in repairs 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

S&F in repairs Framed brackets of angles or tees, rafter purlens with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel'), complete all as specified and as directed.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc, complete all as specified and as directed.

S&F in replacement of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe, complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe etc, complete all as specified and as directed.

S & F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete of approved make, complete all as specified and as directed.

S&F Vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair, complete all as specified and as directed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality, complete all as specified and as directed.

S & F in repair 15 mm bore Angular stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F Central hole basin mixer Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe fixed in repair, complete all as specified and as directed.

S&F Wall mixer two-in- one Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and for OH shower fixed for 15mm dia bore pipe fixed in repair, complete all as specified and as directed.

S&F of Bib tap chromium plated in repair of 15 mm dia bore, screwed for iron pipe, or for brass ferrule, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F in repair CP soap tray fixed to walls with rubber plugs, complete all as specified and as directed.

S&F 125mm dia CP grating doom with/without waste hole (Minimum weight 40 gms), complete all as specified and as directed.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft and loose soil, complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm of loose and soft soil, complete all as specified and as directed.

Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.5 M above the starting point, complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth, complete all as specified and as directed.

Rendering 10mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement, complete all as specified and as directed.

Providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match, complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Demolition and breaking up 150mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement laid in trenches incl all fittings & accessories, complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 concret bed using 40mm graded stone agg to drain pipe including packing under & haunching against the sides of pipe 100 mm dia ( internal) after these are laid in trenches, complete all as specified and as directed.

Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 100mm, complete all as specified and as directed.

Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc, complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc, complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc complete.

S&F 110 mm bore PVC (SWR) Bends with accesss door etc, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) Bends with accesss door etc, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal of unequal, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal, complete all as specified and as directed.

M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement, complete all as specified and as directed.

M&L for 75 mm PVC (SWR) floor trap setting and jointed with solvent cement, complete all as specified and as directed.

Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and as directed.

Preparation of old surface including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint on old plastered or un-plastered surface of walls, complete all as specified and as directed.

M & L for preparation of undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and 1.5m depth for foundation etc or for shaft well, cesspits etc n.exc on plan and n.exc 1.5m depth and getting out in hard/dense soil, complete all as specified and as directed.

M&L for PCC 1:3:6, Type C-2 (40mm graded aggregate) as in fdns, filling and mass concrete etc, complete all as specified and as directed.

M&L Walling of Random rubble masonary ,uncoursed, well bonded,bedded and solidly hearted ,built in cement mortar 1:4, complete all as specified and as directed.

All as per item No 93 above but except stones including Dismantling, complete all as specified and as directed.

M&L for providing cement concrete 1:2:4, Type B-1 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic bands, coping (PCC Bond Stones) and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for cement concrete type C2, 1:3:6 (40mm graded aggregate) as in surface channel and drains, complete all as specified and as directed.

Extra for forming fair finished drain channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L Hardcore of guage Broken stone or boulders exc 63mm but n exc. 150 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered surface, complete all as specified and as directed.

M&L 75mm thick Cement concrete type D2 (1:4:8) (40mm graded aggregate) as in sub base of flooring/hardstanding, complete all as specified and as directed.

M&L for machine pressed precast interlocking paver block any shape ans size confirming to -15658 - 2006 of 60mm thickness, M-35 Grade, laid on sand chshioning,with frey cement and no pigment, complete all as specified and as directed.

M&L sand filling under or in foundations including watering and consolidation, complete all as specified and as directed.

M&L Providing cement concrete B1 1:2:4 ( 20 mm graded aggregate) in kerb rounded or chemfered on edges, complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20 - 25mm thick over and including 15mm cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to the match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

M & L machine cut kota stone as in skirting 20 - 25mm thick laid over and including 10mm thick rendering in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to the match the shade of the skirting including rubbing and polishing, complete all as specified and as directed.

M&L Cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling, sub base and mass concrete, complete all as specified and as directed.

M&L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in coping, mud stop etc, complete all as specified and as directed.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface, complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

(c) One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts,complete all as specified and directed.

S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and as directed

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed

S&F in repairs Distribution Board, SPN 8 Way, Double door,complete all as specified and directed.

S&F in repairs MCB, DP 40 Amps 240 volts 'B' curve, complete all as specified and as directed.

S & F MCB Single pole 6-32A Amps 240 Volts B Curve,complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose,complete all as specified and directed.

S&F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and directed.

Supply and fixing LED bulb 12 W, 220V suitable size from ceiling rose,complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting,complete all as specified and directed.

S&F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet,complete all as specified and directed.

S&F ceiling fans, complete with blades, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor,complete all as specified and as directed.

Supply & fixing in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan,complete all as specified and directed.

S&F ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 100A, complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and as directed.

M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding complete all as specified and directed. Note : Spares used and rewinding shall be measured and paid seperatly under relevant item.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated Supply Supply and fix complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fix exhaust fan made of plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep/brisk air fan of size 300 mm sweep, non matallic, complete all as specified and as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Note:- Schedule of credit Rs 93,550.25 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

MS QADRI BUILDERS (BID ID -3493031)

M/S MUKHTAR CONSTRUCTION CO (BID ID -3492702)

M/S DALJIT SINGH TULLA (BID ID -3490960)

M/s FAYAZ AHAMD WANI AND SONS (BID ID -3491806)

M/S ABDUL MAJID LONE (BID ID -3493055)

GAGAN ASSOCIATES (BID ID -3493409)

Nationalconstruction (BID ID -3492839)