Package 6 Construction work of 1120 EWS II DUs type Affordable Housing Project along with commercial and infrastructure develop at TP 10 and 16 Mota Mava,FP 8A, 36A and 38A and TP 18 Mujka FP 16A BY RMC under PMAY

5. Opening of online and physical, Technical Bid (if 17/06/2026 at 10.30 Hours onwards

6. Verification of submitted documents (EMD, e- 18/06/2026 between 16.00 to 18.00 Hours

tender fee, documents required for pre-

qualification and other necessary documents)

(if possible & required)

7. Opening of Commercial Bid (Price Bid) of 19/06/2026 at 10.30 Hours onwards (If Possible)

technically qualified bidders only. (if possible)

8. Bid Validity 120 Day

RAJKOT MUNICIPAL CORPORATION

KRISHNANAGAR CITY CIVIC CENTRE

GURUPRASAD CHOWK

RAJKOT - 360 004 (GUJARAT)

Name of project : Package-6 - Construction work of 1120 EWS-II DU’s (P+9, P+10, P+11, P+13 & P+14) type Affordable Housing Project along with

Commercial & Infrastructure Development at TP 10 & 16 (Mota Mava) FP 8/A, 36/A & 38/A and TP 18 (Munjka), FP 16/A by Rajkot Municipal Corporation

under Pradhan Mantri Awas Yojna

No. Particulars Quantity Unit Rate Estimated cost

1 Excavation of Foundation in Soft Murrum,Hard Murrum, Soil or Sand from 0.00 9544.00 Cu.Mt. ₹ 137.00 ₹

mtr. To 1.50 mtr. Depth including lifting and laying in 90 mtr. Lead area as

2 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 4772.00 Cu.Mt. ₹ 502.50 ₹

/Gann from 0.0 mtr. to 1.50 mtr depth including lifting and laying in 90 mtr.

lead area as instructed.

3 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 14316.00 Cu.Mt. ₹ 534.00 ₹

/Gann from 1.50 mtr. to 3.00 mtr depth including lifting and laying in 90 mtr.

lead area as instructed

4 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 4772.00 Cu.Mt. ₹ 586.50 ₹

/Gann from 3.01 mtr. to 4.50 mtr depth including lifting and laying in 90 mtr.

lead area as instructed

5 Removel of Excavated Stuff and Laying with in RMC Limit as directed by 20048.00 Cu.Mt. ₹ 171.00 ₹

Engineer in charge

6 Foundation filling with CC work in proportion of 1:2:4 using 1.5 cm to 2.0 cm 2108.00 Cu.Mt. ₹ 4,626.00 ₹

aggregate including Raming, Curing etc.

7 Providing and laying C.C. work in M-300 using aggregate of size 10-20 3980.00 Cu.Mt. ₹ 5,830.00 ₹

mm,centring, curing, finishing etc. complete for : (A) foundation, footing, base

of columns and mass concrete (without reinforcement)

8 Providing & laying CC work M-300 for Column using aggregate of size 10-20 5588.00 Cu.Mt. ₹ 6,750.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

9 CC work M-25 for Wall Partition, Parsdment, railling etc.using aggregateof size 2982.00 Cu.Mt. ₹ 7,150.00 ₹

10-20 mm, centring, curing, finishing etc. complete (without reinforcement)

(FOR ALL FLOOR)

10 Providing and laying C.C. work in M-250 using aggregate of size 10-20 724.00 Cu.Mt. ₹ 6,250.00 ₹

mm,centring, curing, finishing etc. complete for : D) Plinth Beam (without

reinforcement) (FOR ALL FLOOR)

11 Brick work using common burnt clay building bricks having crushing strength 1902.00 Cu.Mt. ₹ 5,761.00 ₹

not less than 35 kg./Sq.Cm. for all floor level in Cement Mortar 1:6 (1- Cement :

6 -fine sand) (FOR ALL FLOOR)

12 Filling of Plinth with using excavated usefull material partly and remaining 10744.00 Cu.Mt. ₹ 185.00 ₹

murrum to be brought from out side in layer of 0.23 m thick including murrum

and sprinkling of water, compaction etc. complete

13 Filling of Plinth in layers of 0.23 m thick including murrum and sprinkling of 24472.00 Cu.Mt. ₹ 347.00 ₹

water, compaction etc. complete

14 Carring out plinth treatment to post construction / existing structure by 9544.00 Sq.Mt. ₹ 123.12 ₹

spraying chemical solution for termite control treatment including labour and

material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles

20 EC. As Per 6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of surface is recommended as per I.S

15 Providing & laying CC work M-250 for Beam using aggregate of size 10-20 12163.00 Cu.Mt. ₹ 6,250.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

16 Providing & laying CC work M-250 for RCC slab using aggregate of size 10-20 11975.00 Cu.Mt. ₹ 6,150.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

17 Providing & laying CC work M-250 for Lintel using aggregate of size 10-20 mm, 192.00 Cu.Mt. ₹ 6,000.00 ₹

centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

18 Providing & laying CC work M-250 for Chhaja using aggregate of size 10-20 531.00 Cu.Mt. ₹ 5,950.00 ₹

mm, centring, curing, finishing etc. complete (without reinforcement) (FOR

19 Providing & laying CC work M-250 for Stair Case using aggregate of size 10-20 487.00 Cu.Mt. ₹ 6,300.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

20 Providing & laying CC work M-250 for Copping using aggregate of size 10-20 276.00 Cu.Mt. ₹ 5,550.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

21 CC work M20 for RCC Grade slab(Bottom slab) using aggregate of size 10-20 908.00 Cu.Mt. ₹ 5,000.00 ₹

mm, centring, curing, finishing etc. complete (without reinforcement)

22 Supplying, Cutting, Beding, Binding and Hooking and binding with wire for 5753405.00 Kg. ₹ 65.00 ₹

RCC work Tor steel TMT round bar including all cost

23 Providing & laying Cement concrete flooring (IPS) 50mm thick in proportion 11352.00 Sq.Mt. ₹ 338.00 ₹

1:2:4 with a floating coat of neat cement,finishing,curing etc.

24 Supply & Fixing of Broken Glazed (China Mosaic) tiles size 5-6 mm thick of 6360.00 Sq.Mt. ₹ 306.00 ₹

different size and shade (approved crazy patern) in Cement:Mortar 1:2 and

joint filling with White Cement / Coloured Cement with water proofing

component including Ramping, Watering, Curing etc. complete (FOR ALL

25 Masonary work using Aerated Light Weight concrete block having crushing 23317.00 Cu.Mt. ₹ 3,982.00 ₹

strength not less than 35kg/sq.cm. and 0.20wmk thermal conductivity for

super structure above plinth level to ALL FLOOR in chemical mortar complete

as per technical Specification. (FOR ALL FLOOR)

26 Providing and fixing 150 mm wide, approved quality chicken wire mesh at 43272.00 Sq.Mt. ₹ 102.00 ₹

junction of brick/AAC Block work and RCC work or two dissimilar surfaces, at

all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all complete as directed.

(FOR ALL FLOOR)

No. Particulars Quantity Unit Rate Estimated cost

27 Cement Plaster Work 12 mm average thick using Cement:Mortar in 186205.00 Sq.Mt. ₹ 207.00 ₹

proportion of 1:3 rough cast (without Niru Finishing) etc. complete (Note:

Before carringout Plaster work on RCC, required tipping work should be

carried out as instructed)(FOR ALL FLOOR)

28 Providing and Applying 3 Coat Ready mix Curing less Chemical Mortar 79885.00 Sq.Mt. ₹ 219.00 ₹

Plaster 5 to 7 mm thick average with smooth finishing with line & level for

Ceiling with with 2 year warranty, specification and direction by Engineer

Incharge, all materials, tools,plant and labour etc. complete (Note: Before

carringout Plaster work on RCC, required tipping ,chiselling & cleaning work

should be carried out as instructed)(FOR ALL FLOOR)

29 Applying Aprroved Made Birla or JK lapy (putty) three coats & three coats of 266090.00 Sq.Mt. ₹ 82.00 ₹

primer of approved brand and manufacture on new wall surface with

years warrantee (to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth) (FOR ALL FLOOR)

30 20mm thick Sand Face Cement Plaster Work in which 1st plaster in proportion 102276.00 Sq.Mt. ₹ 263.00 ₹

of 1:3 and 2nd plaster in proportion of 1:2 using Cement:Mortar mixed with

fibre, spong finishing etc. complete (Note: Before carringout Plaster work on

RCC, required tipping work should be carried out as instructed)for all Floor

31 Plaster with grooving and Patta of size 5 cm to 10 cm width and 12 to 20 mm 28600.00 Rmt. ₹ 35.00 ₹

thick using in proportion of 1:3 (FOR ALL FLOOR)

32 Water Proof Cement Plaster 20 mm thick using Water Proofing Compound 14344.00 Sq.Mt. ₹ 234.00 ₹

and in the ratio of 1:3 with necessary finishing (Note: Before carringout Plaster

work on RCC, required tipping work should be carried out as instructed)(FOR

33 Supply & fixing of Vitrified flooring (1st quality) with cement grouting in joints 53234.00 Sq.Mt. ₹ 650.00 ₹

etc. complete. (FOR ALL FLOOR)

34 Supply & fixing of Vitrified for skirting work (1st quality) width up to 10 cm 61571.00 Rmt. ₹ 96.00 ₹

including with cement grouting in joints etc. complete (FOR ALL FLOOR)

35 Providing and laying Ceramic tiles 6mm thick in flooring, skirting, risers of steps 45836.00 Sq.Mt. ₹ 1,028.11 ₹

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry.

36 Supply & Fixing of Polished Kota Stone steps and risers work of length 0.90 to 24744.00 Rmt. ₹ 442.00 ₹

2.00 mtr and thickness 20-25 mm to be fixed in Cement:Mortar 1:2 and

Cement slury and as instructed (FOR ALL FLOOR)

37 Supply, Fixing & Polishing of Kota Stone work thickness 20-25 mm to be fixed in 9092.00 Sq.Mt. ₹ 913.00 ₹

cement:Mortar 1:2 and liquid Cement and as instructed (ALL FLOORS)

38 Providing and fixing sandwiched type Green Marble as Kitchen platform 2422.00 Sq.Mt. ₹ 2,583.00 ₹

etc. 25mm thick kotah stone one side polished for Platform bottom with

20mm thick bedding in CM 1:4, 25mm thick Green Marble one side polished

for kitchen platform Top. Two piece double side polish kota for Partition and

One for side face or end of Kitchen Platform with Green Marble side vertical

piece and 75 mm wide Green Marble patti for platform top facia.The joint

shall be filled with white cement . The cutouts for Kitchen sink if required shall

be provided as per drawing. The stone shall be of one shade only , finished

sizes shall be measured & paid for. ( For all floors )

39 Apex Color work with water proofing cement paint of on wall surfaces (Two 102276.00 Sq.Mt. ₹ 115.00 ₹

coats or as per instruction of site Incharge) to give an approved brand and

manufacture and of required shape even shade after thoroughly brushing

the surface to remove all dirt and remains of loose powder materials. (FOR

40 Cement, lodhiya work with neat cement slurry finishing (FOR ALL FLOOR) 39613.00 Rmt. ₹ 26.00 ₹

41 Providing and fixing 30 mm thick good quality flush door shutter with 01 mm 6682.00 Sq.Mt. ₹ 4,437.00 ₹

laminated sheet on both side and necessary SS and aluminium fixtures and

fastening as per satisfaction of Engineer in charge complete.(FOR ALL

42 Providing & fixing FRP door.(FOR ALL FLOOR) 1814.00 Sq.Mt. ₹ 4,200.00 ₹

43 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of 5758.00 Rmt. ₹ 679.85 ₹

crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive

shutter of 30 mm thickness. The laminate shall be moulded with fire resistant

grade unsaturated polyester resin and chopped mat. Door frame laminate

shall be 2mm thick and shall be filled with suitable wooden block in all the

three legs. The frame shall be covered with fiber glass from all sides. M.S. stay

shall be provided at the bottom to steady the frame.

44 RCC Precast frame for all type of wall thickness as directed by Engineer-in- 6682.00 Sq.Mt. ₹ 477.00 ₹

Charge. (For All Floor)

45 Providing and Fixing solid PVC door with frame (Choukhat) of size 50x47 mm 3682.00 Sq.Mt. ₹ 2,500.00 ₹

of 5mm sheet and 30mm thick solid panel PVC door shutter. Rate inclusive of

providing and fixing necessary Aluminum fixture and fastening as per

specification and as per instruction of site Engg. In charge. (FOR ALL FLOOR)

46 Aluminium sliding window work etc. (A) Aluminium powder coated three 7840.00 Sq.Mt. ₹ 2,752.00 ₹

track windows width with 2 shutter aluminium sliding window as per site

situation. as per instructed by engineer incharge and As per specifications.

1,(For 2 Sliding Shutters) Providing and fixing Window having extruded

Alluminium Aluminium powder coated section horizontal and vertical Three

track member size 92mm x 31.75mm x 1.00mm (of Section no:8688,@ Wt.0.89

Kg/mt), With 2 sliding shutter of horizontal member size 40mm x 18mm x

mm (of section no.8949 @ Wt. of 0.456 kg/Rmt ) vertical member of size 40mm

x 18mm x 1.00 mm (of section no.8949 @ Wt. of 0.456 kg/Rmt section 8948 @

Wt.0.457 kg/rmt.) with 4 mm thick transperent bronze colour tinted float glass

with powder coated alluminium fittings and fixtures with locking arrangement

to frame and fixtures and transparent silicon sealant fixing to outside frame as

per Instruction.

47 Providing & fixing approved quality & designed rolling shutters with necessary 258.00 Sq.Mt. ₹ 2,069.00 ₹

top cover, fittings, single coat red lead, double coat silver or oil paint. (FOR

48 Iron work as per drawing and instruction including all (FOR ALL FLOOR) 188039.00 Kg. ₹ 109.00 ₹

49 Grill work for doors - windows etc. as per design on site with fitting & fixing. 172480.00 Kg. ₹ 109.00 ₹

(FOR ALL FLOOR)

No. Particulars Quantity Unit Rate Estimated cost

50 Enemal painting on door/window, iron door, iron grill or woodwork two coat 36339.00 Sq.Mt. ₹ 125.00 ₹

and including preparing the surface by throughly cleaning oil, grease, dirt

and other foreign matter, sand papering and knotting. (FOR ALL FLOOR)

51 Numbering on Building / Quarters (Painting work) as directed 4500.00 Character ₹ 11.00 ₹

52 Supply & Fixing of Granite with required carving and fixing it with cement at 28.00 Sq.Mt. ₹ 10,258.00 ₹

specified place etc. complete (FOR ALL FLOOR)

53 White Porselin Urinal with require plastic waste pipe fitting and fixing. 13.00 Each ₹ 1,558.00 ₹

54 Providing & Fixing P.V.C. flexible pipe for wash basin. 3388.00 Each ₹ 50.00 ₹

55 Cinder filling in sunk of toilet wash as specified (FOR ALL FLOOR) 2406.00 Cu.Mt. ₹ 476.00 ₹

56 Providing and fixing standared extruded of alluminium section of size 63mm x 624.00 Sq.Mt. ₹ 1,163.92 ₹

38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour

Powder Coated alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation. (FOR ALL FLOOR)

57 Suppling & Fixing Lock. 1260.00 Each ₹ 50.00 ₹

58 Providing and laying machine cut moulded edges machine marble for sill in 2813.00 Sq.Mt. ₹ 2,129.00 ₹

walls in Zigzag pattern 18 mm thick including cutting grooves in walls and

fixing the stone with cement mortar 1:4 and finishing the same with neat

cement slurry in true line and level as directed . etc. complete. (All Open

edges should be full round polished). As per drawing or as per instruction

given by engineer in charge. (FOR ALL FLOOR)

Constructing Under Ground & Over Head Water Tank all RCC work including

Steel as per structural drawing, Water tank location & capacity suggested

by Project Architect / Engineer-in-charge, Structural Design by Structural

Engineer and proof checking by RMC / PMC including necessary excavation

& filling work, 15 cm thick base PCC work, bottom & top slab, pardi with

water proofing cement plaster in C.M. 1:2 with smooth finishing, watering ec.

comp. to all inner face of tank & 20 mm thk. sandface cement plaster

consisting base coat of 12 mm thk. in C.M. 1:3 & 8 mm thk. finishing & glazed

tiles (1st Quality) insides of tank of required size in Cement and Joints to be

filled with white cement comp. etc. (Note: Before carring out plaster work on

RCC, required tipping work should be carried out as instructed).

Total of Part_1 Civil ₹

2 - WATER SUPPLY AND SANITATION

60 Providing and fixing wash down water closet (Anglo Indian type , W.C. Pan) 1120.00 Each ₹ 3,477.00 ₹

with integral P trap including jointing the trap with soil pipe in Cement Mortar

1:1 (1 - Cement : 1 - Fine Sand) with plastic seat,Bib Cock 2 in 1 Elbow Valve

Faucet (Wall Mounted),Health Faucet Jet Spray, PVC Dual Flush Tank and

cover for wash down water closer with C.P. brass hinges and rubber buffers.

(A) Vitreous China Pattern : (i) In White Colour

61 Providing and fixing wash down water closet (European type , W.C. Pan) with 1128.00 Each ₹ 4,025.00 ₹

integral P or S trap including jointing the trap with soil pipe in Cement Mortar

1:1 (1 - Cement : 1 - Fine Sand) with plastic seat,Bib Cock 2 in 1 Elbow Valve

Faucet (Wall Mounted),Health Faucet Jet Spray, PVC Dual Flush Tank and

cover for wash down water closer with C.P. brass hinges and rubber buffers.

(A) Vitreous China Pattern : (i) In White Colour

62 Providing & Fixing White porselin wash bassin indian make size as per site 2240.00 Each ₹ 1,261.00 ₹

situatation & Inst.by engg.Incharge, c.i. bracket,Waste Couplin with fitting

Chromium platted topes 25cm plastic waste pipe and 12mm pillar cock with

comp. (FOR ALL FLOOR LEVEL)

63 Providing and fixing Kitchen SS Sink Glosy ASIS 304 Grade x 1mm thick with 1120.00 Each ₹ 1,316.95 ₹

over all size 510x432mm & bowl size 445x368x190 including cutting holes in

stone and making good the same including C P 32mm waste pipe .

64 Providing & fixing PVC SWR Nahani Trap IS 14735 for drain with 6 inch x 6 inch 6752.00 Each ₹ 300.00 ₹

SS jali of the 7.6 cm nominal diameter of self cleaning design with C.I. Screwed

down or hinged grating including the cost of cutting and making good the

65 Providing and fixing Brass chromium plated screws down bib tap of 15mm 6862.00 Each ₹ 184.98 ₹

nominal dia. of approved quality and brand.As per instruction given by

engineer in charge.

66 Providing and fixing Gun Metal Check or Non-return Fullway Wheel Valve. 2288.00 Each ₹ 416.47 ₹

67 Providing laying and jointing in true line and level 25mm dia. (5.16 mm 17260.00 Rmt. ₹ 77.25 ₹

minimum wall thickness) U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

68 Providing laying and jointing in true line and level 15mm dia. (5.16 mm 17260.00 Rmt. ₹ 43.62 ₹

minimum wall thickness) U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

69 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 11200.00 Rmt. ₹ 168.67 ₹

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc.complete.[A] 15 mm.

70 Providing & laying P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 110 MM DIA. (OUTER) 6800.00 Rmt ₹ 262.00 ₹

with special as per site condition with required jointing solution including

hydraulic testing as approved & directed by engineer-in-charge

71 Providing & laying P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 75 MM DIA. (OUTER) 7920.00 Rmt ₹ 127.00 ₹

with special as per site condition with required jointing solution including

hydraulic testing as approved & directed by engineer-in-charge

72 Providing & laying P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 50 MM DIA. (OUTER) 3224.00 Rmt ₹ 58.00 ₹

with special as per site condition with required jointing solution including

hydraulic testing as approved & directed by engineer-in-charge

Total of Part_2 ₹

No. Particulars Quantity Unit Rate Estimated cost

Total ( Part_1+2) ₹

3 - (PART - A) Aanganwadi - Civil

1 Excavation of Foundation in Soft Murrum,Hard Murrum, Soil or Sand from 0.00 309.37 Cu.Mt. ₹ 137.00 ₹

mtr. To 1.50 mtr. Depth including lifting and laying in 90 mtr. Lead area as

2 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 154.69 Cu.Mt. ₹ 502.50 ₹

/Gann from 0.0 mtr. to 1.50 mtr depth including lifting and laying in 90 mtr.

lead area as instructed

3 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 309.37 Cu.Mt. ₹ 534.00 ₹

/Gann from 1.50 mtr. to 3.00 mtr depth including lifting and laying in 90 mtr.

lead area as instructed

4 Removel of Excavated Stuff and Laying with in RMC Limit as directed by 630.14 Cu.Mt. ₹ 171.00 ₹

Engineer in charge

5 Foundation filling with CC work in proportion of 1:2:4 using 1.5 cm to 2.0 cm 24.88 Cu.Mt. ₹ 4,626.00 ₹

aggregate including Raming, Curing etc.

6 Providing and laying C.C. work in M-300 using aggregate of size 10-20 19.81 Cu.Mt. ₹ 5,830.00 ₹

mm,centring, curing, finishing etc. complete for : (A) foundation, footing, base

of columns and mass concrete (without reinforcement)

7 Providing & laying CC work M-300 for Column using aggregate of size 10-20 16.67 Cu.Mt. ₹ 6,750.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement)

8 Providing and laying C.C. work in M-250 using aggregate of size 10-20 10.45 Cu.Mt. ₹ 6,250.00 ₹

mm,centring, curing, finishing etc. complete for : D) Plinth Beam (without

9 Brick work using common burnt clay building bricks having crushing strength 14.01 Cu.Mt. ₹ 5,761.00 ₹

not less than 35 kg./Sq.Cm. for all floor level in Cement Mortar 1:6 (1- Cement :

10 Filling of Plinth with using excavated usefull material partly and remaining 103.71 Cu.Mt. ₹ 185.00 ₹

murrum to be brought from out side in layer of 0.23 m thick including murrum

and sprinkling of water, compaction etc. complete

11 Filling of Plinth in layers of 0.23 m thick including murrum and sprinkling of 301.88 Cu.Mt. ₹ 347.00 ₹

water, compaction etc. complete

12 Carring out plinth treatment to post construction / existing structure by 166.08 Sq.Mt. ₹ 123.12 ₹

spraying chemical solution for termite control treatment including labour and

material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles

20 EC. As Per 6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of surface is recommended as per I.S

13 Providing & laying CC work M-250 for Beam using aggregate of size 10-20 14.01 Cu.Mt. ₹ 6,250.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement)

14 Providing & laying CC work M-250 for RCC slab using aggregate of size 10-20 17.79 Cu.Mt. ₹ 6,150.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement)

15 Providing & laying CC work M-250 for Lintel using aggregate of size 10-20 mm, 0.94 Cu.Mt. ₹ 2,021.00 ₹

centring, curing, finishing etc. complete (without reinforcement)

16 Providing & laying CC work M-250 for Chhaja using aggregate of size 10-20 2.45 Cu.Mt. ₹ 5,950.00 ₹

mm, centring, curing, finishing etc. complete (without reinforcement)

17 Providing & laying CC work M-250 for Stair Case using aggregate of size 10-20 5.08 Cu.Mt. ₹ 6,300.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement)

18 Providing & laying CC work M-250 for Copping using aggregate of size 10-20 0.16 Cu.Mt. ₹ 5,550.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement)

19 Supplying, Cutting, Beding, Binding and Hooking and binding with wire for 9453.20 Kg. ₹ 65.00 ₹

RCC work Tor steel TMT round bar including all cost

20 Providing & laying Cement concrete flooring (IPS) 50mm thick in proportion 133.60 Sq.Mt. ₹ 338.00 ₹

1:2:4 with a floating coat of neat cement,finishing,curing etc. (For Sunk &

21 Supply & Fixing of Broken Glazed (China Mosaic) tiles size 5-6 mm thick of 125.03 Sq.Mt. ₹ 306.00 ₹

different size and shade (approved crazy patern) in Cement:Mortar 1:2 and

joint filling with White Cement / Coloured Cement with water proofing

component including Ramping, Watering, Curing etc. complete (FOR ALL

22 Masonary work using Aerated Light Weight concrete block having crushing 72.08 Cu.Mt. ₹ 3,982.00 ₹

strength not less than 35kg/sq.cm. for super structure above plinth level to ALL

FLOOR in chemical mortar complete as per technical Specification. (FOR ALL

23 Providing and fixing 150 mm wide, approved quality chicken wire mesh at 45.00 Sq.Mt. ₹ 102.00 ₹

junction of brick/AAC Block work and RCC work or two dissimilar surfaces, at

all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all complete as directed.

24 Cement Plaster Work 12 mm average thick using Cement:Mortar in 266.41 Sq.Mt. ₹ 207.00 ₹

proportion of 1:3 rough cast (without Niru Finishing) etc. complete (Note:

Before carringout Plaster work on RCC, required tipping work should be

carried out as instructed)(FOR ALL FLOOR)

25 Providing and Applying 3 Coat Ready mix Curing less Chemical Mortar 152.00 Sq.Mt. ₹ 219.00 ₹

Plaster 5 to 7 mm thick average with smooth finishing with line & level for

Ceiling with with 2 year warranty, specification and direction by Engineer

Incharge, all materials, tools,plant and labour etc. complete (Note: Before

carringout Plaster work on RCC, required tipping ,chiselling & cleaning work

should be carried out as instructed)(FOR ALL FLOOR)

26 Applying Aprroved Made Birla or JK lapy (putty) three coats & three coats 418.41 Sq.Mt. ₹ 82.00 ₹

of primer of approved brand and manufacture on new wall surface with

years warrantee (to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth) (FOR ALL FLOOR)

27 20mm thick Sand Face Cement Plaster Work in which 1st plaster in proportion 434.76 Sq.Mt. ₹ 263.00 ₹

of 1:3 and 2nd plaster in proportion of 1:2 using Cement:Mortar mixed with

fibre, spong finishing etc. complete (Note: Before carringout Plaster work on

RCC, required tipping work should be carried out as instructed)for all Floor

28 Plaster with grooving and Patta of size 5 cm to 10 cm width and 12 to 20 mm 150.16 Rmt. ₹ 35.00 ₹

thick using in proportion of 1:3 (FOR ALL FLOOR)

No. Particulars Quantity Unit Rate Estimated cost

29 Water Proof Cement Plaster 20 mm thick using Water Proofing Compound 16.59 Sq.Mt. ₹ 234.00 ₹

and in the ratio of 1:3 with necessary finishing (Note: Before carringout Plaster

work on RCC, required tipping work should be carried out as instructed)(FOR

30 Supply & fixing of Vitrified flooring (1st quality) with cement grouting in joints 111.95 Sq.Mt. ₹ 650.00 ₹

etc. complete. (FOR ALL FLOOR)

31 Supply & fixing of Vitrified for skirting work (1st quality) width up to 10 cm 90.48 Rmt. ₹ 96.00 ₹

including with cement grouting in joints etc. complete (FOR ALL FLOOR)

32 Providing and laying Ceramic tiles 6mm thick in flooring, skirting, risers of steps 73.44 Sq.Mt. ₹ 1,028.11 ₹

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry.

33 Supply & Fixing of Polished Kota Stone steps and risers work of length 0.90 to 27.00 Rmt. ₹ 442.00 ₹

2.00 mtr and thickness 20-25 mm to be fixed in Lime:Mortar 1:2 and Cement

slury and as instructed

34 Supply, Fixing & Polishing of Kota Stone work thickness 20-25 mm to be fixed in 16.50 Sq.Mt. ₹ 913.00 ₹

cement:Mortar 1:2 and liquid Cement and as instructed (ALL FLOORS)

35 Providing and fixing sandwiched type Green Marble as Kitchen platform 6.27 Sq.Mt. ₹ 2,583.00 ₹

etc. 25mm thick kotah stone one side polished for Platform bottom with

20mm thick bedding in CM 1:4, 25mm thick Green Marble one side polished

for kitchen platform Top. Two piece double side polish kota for Partition and

One for side face or end of Kitchen Platform with Green Marble side vertical

piece and 75 mm wide Green Marble patti for platform top facia.The joint

shall be filled with white cement . The cutouts for Kitchen sink if required shall

be provided as per drawing. The stone shall be of one shade only , finished

sizes shall be measured & paid for. ( For all floors )

36 Apex Color work with water proofing cement paint of on wall surfaces (Two 434.76 Sq.Mt. ₹ 115.00 ₹

coats or as per instruction of site Incharge) to give an approved brand and

manufacture and of required shape even shade after thoroughly brushing

the surface to remove all dirt and remains of loose powder materials. (FOR

37 Cement, lodhiya work with neat cement slurry finishing (FOR ALL FLOOR) 114.70 Rmt. ₹ 26.00 ₹

38 Providing and fixing 30 mm thick good quality flush door shutter with 01 mm 8.52 Sq.Mt. ₹ 4,437.00 ₹

laminated sheet on both side and necessary SS and aluminium fixtures and

fastening as per satisfaction of Engineer in charge complete.(FOR ALL

39 Providing and Fixing solid PVC door frame (Choukhat) of size 50x47 mm of 9.59 Sq.Mt. ₹ 2,500.00 ₹

5mm sheet and 30mm thick solid panel PVC door shutter. Rate inclusive of

providing and fixing necessary Aluminum fixture and fastening as per

specification and as per instruction of site Engg. In charge. (FOR ALL FLOOR)

40 RCC Precast frame for all type of wall thickness as directed by Engineer-in- 8.52 Sq.Mt. ₹ 477.00 ₹

Charge. (For All Floor)

41 Aluminium sliding window work etc. (A) Aluminium powder coated three 20.16 Sq.Mt. ₹ 2,752.00 ₹

track windows width with 2 shutter aluminium sliding window as per site

situation. as per instructed by engineer incharge and As per specifications.

1,(For 2 Sliding Shutters) Providing and fixing Window having extruded

Alluminium Aluminium powder coated section horizontal and vertical Three

track member size 92mm x 31.75mm x 1.00mm (of Section no:8688,@ Wt.0.89

Kg/mt), With 2 sliding shutter of horizontal member size 40mm x 18mm x

mm (of section no.8949 @ Wt. of 0.456 kg/Rmt ) vertical member of size 40mm

x 18mm x 1.00 mm (of section no.8949 @ Wt. of 0.456 kg/Rmt section 8948 @

Wt.0.457 kg/rmt.) with 4 mm thick transperent bronze colour tinted float glass

with powder coated alluminium fittings and fixtures with locking arrangement

to frame and fixtures and transparent silicon sealant fixing to outside frame as

per Instruction.

42 Providing and fixing standared extruded of alluminium section of size 63mm x 1.62 Sq.Mt. ₹ 1,163.92 ₹

38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour

Powder Coated alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation.

43 Iron work as per drawing and instruction including all (FOR ALL FLOOR) 324.00 Kg. ₹ 109.00 ₹

44 Grill work for doors - windows etc. as per design on site with fitting & fixing. 441.36 Kg. ₹ 109.00 ₹

(FOR ALL FLOOR)

45 Enemal painting on door/window, iron door, iron grill or woodwork two coat 74.18 Sq.Mt. ₹ 125.00 ₹

and including preparing the surface by throughly cleaning oil, grease, dirt

and other foreign matter, sand papering and knotting. (FOR ALL FLOOR)

46 Numbering on Building / Quarters (Painting work) as directed 100.00 Character ₹ 11.00 ₹

47 Supply & Fixing lock 6.00 Each ₹ 50.00 ₹

Total of (PART - A) Aanganwadi - Civil ₹

3 - (PART - B) WATER SUPPLY AND SANITATION

48 Providing and fixing wash down water closet (Anglo Indian type , W.C. Pan) 6.00 Each ₹ 3,477.00 ₹

with integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat,Bib Cock 2 in 1 Elbow

Valve Faucet (Wall Mounted),Health Faucet Jet Spray, PVC Dual Flush Tank

and cover for wash down water closer with C.P. brass hinges and rubber

buffers. (A) Vitreous China Pattern : (i) In White Colour

49 Providing & Fixing White porselin wash bassin indian make size as per site 6.00 Each ₹ 1,261.00 ₹

situatation & Inst.by engg.Incharge, c.i. bracket,Waste Couplin with fitting

Chromium platted topes 25cm plastic waste pipe and 12mm pillar cock with

comp. (FOR ALL FLOOR LEVEL)

50 Providing and fixing Kitchen SS Sink Glosy ASIS 304 Grade x 1mm thick with 2.00 Each ₹ 1,316.95 ₹

over all size 510x432mm & bowl size 445x368x190 including cutting holes in

stone and making good the same including C P 32mm waste pipe .

51 Providing & fixing PVC SWR Nahani Trap IS 14735 for drain with jali of the 100 10.00 Each ₹ 300.00 ₹

mm nominal diameter of self cleaning design with C.I. Screwed down or

hinged grating including the cost of cutting and making good the walls.

52 Providing and fixing 15 mm dia. Brass chromium plated screws down Bib Tap. 6.00 Each ₹ 184.98 ₹

53 Providing and fixing Gun Metal Check or Non-return Fullway Wheel Valve. 6.00 Each ₹ 416.47 ₹

No. Particulars Quantity Unit Rate Estimated cost

54 Providing laying and jointing in true line and level 25mm dia. (5.16 mm 18.00 Rmt. ₹ 77.25 ₹

minimum wall thickness) U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

55 Providing laying and jointing in true line and level 15mm dia. (5.16 mm 18.00 Rmt. ₹ 43.62 ₹

minimum wall thickness) U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

56 Providing & laying P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 110 MM DIA. (OUTER) 12.00 Rmt. ₹ 262.00 ₹

with special as per site condition with required jointing solution including

hydraulic testing as approved & directed by engineer-in-charge

57 Providing & laying P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 50 MM DIA. (OUTER) 42.00 Rmt. ₹ 58.00 ₹

with special as per site condition with required jointing solution including

hydraulic testing as approved & directed by engineer-in-charge

58 Providing and fixing machine cut free edges machine polished Kota stone 22.27 Sq.Mt. ₹ 858.00 ₹

open storage perellel to walls single piece 25 mm including cutting grooves

in walls and fixing the stone including vertical support and shelves with

cement mortar 1:4 and finishing the same with neat cement slurry in true line

and level and front edge Full round polishing as per detailed drawing and as

directed etc. complete. (2.4 Ht.)

59 Providing and laying machine cut moulded edges machine marble for sill in 6.30 Sq.Mt. ₹ 2,882.00 ₹

walls in Zigzag pattern 18 mm thick including cutting grooves in walls and

fixing the stone with cement mortar 1:4 and finishing the same with neat

cement slurry in true line and level as directed . etc. complete. (All Open

edges should be full round polished). As per drawing or as per instruction

given by engineer in charge.

Total Part A + B ₹

3 - (PART - C) Aanganwadi - Electric (Point)

1 Point Rates includes : Providing, erecting & testing of Modular Type concealed Light 200.00 Pt. ₹ 1,263.83 ₹

Points, Bell points, Fan Points, 6/16A Plug with 2-2.5 sq. mm Cu. Mains, Looped plug

point, TV point in each flat. It includes ISI marked 1.1 kv grade FRLS PVC insulated

multistrand 2 wire 4 sq. mm copper wires (G.F.Meter to All floor Units DB) + ISI marked

1.1 kv grade FRLS PVC insulated multistrand 4 wire 6 sq. mm copper wires + ISI

marked 1.1 kv grade FRLS PVC insulated multistrand 2 wire 1.5 sq. mm copper wires

(Covers all light, bell & Fan points) + ISI marked 1.1 kv grade FRLS PVC insulated

multistrand 2 wire 2.5 sq. mm copper wires (DB to Switch board, DB to 6/16 A plug

point, Common Area light point) , earth wire of 1.5 sq.mm , 2.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wire + 20mm

to 32mm ISI mark Medium class RIGID PVC PIPES and accessories + 6A Modular Type

ISI marked flush type switch / bell push/ plug and accessories + Metal / PVC Box

covered with 3 mm thick PC(Polycarbonet) /Acrylic sheet + Lamp holder/ceiling rose

/ H.D.Connector +

Gauge M.S. fan hook box / Heavy Duty PVC box +Electronic Hum free EME Socket

Type Steps Fan Regulator + 10 to 15 W Down Light , cool white with PC diffuser

suitable for B22 LAMP holder + Three phase 8 way SS Double door DB (For Parking

Area ,Stair Passage & Common Area) + Single phase 8 way SS Double DB,4 Nos MCB

& RCCB (In each Flat, Shopping Complex or directed by Incharge engg.) + RG-6 TV

Co-axial flexible solid bare copper cable + MCB DP Encloser made from Steel Sheet +

Junction Box + Blank plate etc. It also includes common area light points (Parking,

Passage, Staircase, Foyer, Terrace) + All liasoning work to get meter and necessary

permission to complete Electrification work for all building premises (Flat, Lift,

Plumbing Load, Common Area etc.) Contractor has to complete all work using

necessary material or

item even it is not mention here. . (Note.:-All wire for Electric meter at Ground level to

floor level Du's D.B.& D.B. to Switch board all

Type of material & labour are including in

point rate No additional payment paid to

3 - (PART - D) Aanganwadi - Electric (Internal incl. Solar)

1 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 60.00 Ea. ₹ 295.93 ₹

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light

with integral driver (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-

2 Supplying and erecting led lamps with following wattage capacity of 220 to 6.00 Ea. ₹ 165.64 ₹

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) Tube Light with integral driver (i) 5-10 Watts, Surge-2 KV,

IP-20, conventional 1 to 2 feet Cat-III

3 Supplying and erecting led lamps with following wattage capacity of 220 to 22.00 Ea. ₹ 112.11 ₹

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder (ii) 5 to

No. Particulars Quantity Unit Rate Estimated cost

4 providing and erecting Miniature circuit breaker single pole 6A to 25A 4.00 Ea. ₹ 112.11 ₹

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

5 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 4.00 Ea. ₹ 737.30 ₹

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (c)63 Amp.Cat.III

6 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) 4.00 Ea. ₹ 295.93 ₹

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp.

7 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. 4.00 Ea. ₹ 108.07 ₹

8 Providing and erecting Sheet Steel powder coated MCB distribution board - 4.00 Ea. ₹ 1,152.41 ₹

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase

outgoing(b) sheet steel double door (IP-43)(iii)8 way

9 providing and erecting Approved make RCCBs conforming to IS: 12640 and 4.00 Ea. ₹ 2,235.13 ₹

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (ii)

40Amps. DP Cat. III

10 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 16.00 Ea. ₹ 1,948.29 ₹

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

cms. down rod erected with 24/ 0.2, 3 core flexible wire with earthing.(Make

shall be approved by Engineer in charge)

11 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 8.00 Mtr. ₹ 108.07 ₹

down rod erected duly painted for fan complete with necessary 24/ O.20,

core flexible wire with earthing.

12 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 16.00 Ea. ₹ 108.07 ₹

RCC bars up to 50mm length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

13 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan 16.00 Ea. ₹ 18.18 ₹

14 Supplying & erecting single phase approved make industrial exhaust fan 8.00 Ea. ₹ 2,054.34 ₹

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM [A]

mm dia 900 RPM Cat.II

15 Supplying and erecting approved make oscillating type bracket fan A.C. 12.00 Ea. ₹ 2,534.09 ₹

23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and

rotary tilting device complete with guard, flexible Core plug top complete

erected with lead wires as directed. Cat.II

16 SITC for Area Lighthing Protection System Franklin- France make Lightning 2.00 Ea ₹ 2,49,141.75 ₹

Arrestor consisting below mentioned main features :

Supply of advanced piezoelectric ceramic based Saint Elmo lightning

protection system suitable for protection of buildings against direct lighting

strike. Complete with Early streamer emission (with piezoelectric exciter device

for corona effect). The ESE terminal shall operate permanently for both

POSITIVE AND NEGATIVE lightning strikes. The lightning conductor shall have

no radio active source and shall not depend on any battery or external

power supplied for its operation. The capture head should be provided

inalterable and good conductor structured to generate a forced air

circulation at its tip and its prolongation (Venturi: Air intakes and peripheral

ejectors), complete as required. Should be tested and approved by Bazzet

Test Laboratory, France and CPRI, India.( With counter ) Radius of protection

in Level-1 79 mtrs.

17 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar

Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy

Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and positive power tolerance

Pmax: 0/+5, Module Efficiency should be approx. 18%-21%, Normal

operating temperature 45'C, Junction Box with Waterproof IP67 & MC4

Compatible and Enclosed with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-efficient of the PV module

shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year

Avg) With 10 year Product warranty and 25 year Linear Power Warranty.,

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p

Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1,

O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding

No. Particulars Quantity Unit Rate Estimated cost

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output

Over Current Protection Integrated, Output Short Circuit Protection

Integrated, Output Over Voltage Protection Integrated, Protection Degree:

IP65, User Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi,

Module Mounting Structure: Seamless Box Pipe / 'C' Channel of suitable size

for rooftop solar installations with good stability agaist wind & weight load.,

Hot Dipped Galvanized steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be suitable for carry

the load of solar panel,wiring, sprinkler system etc. with necessary foundation

work/wall mount, j bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality. and Balane of System with necessary

Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting

wiring, earthing system, lightining arrester system, all liasoning work with various

gov. dipartment like state nodal agency,DISCOM & CEIG is included in

(Excluding GEDA Application fees, Solar connectivity Charges, Meter

connectivity Charges, Meter testing Charges.)

(D) Grid Tied Solar Power System: 26 - 50 kW (3 - phase) - 6 PER KW ₹ 42,156.39 ₹

Total Part C+D(Aanganwadi Electric) ₹

4 - Internal Electric

1 Point Rates includes : Providing, erecting & testing of Modular Type 26671.00 Pt. ₹ 1,152.47 ₹

concealed Light Points, Bell points, Fan Points, 6/16A Plug with 2-2.5 sq. mm

Cu. Mains, Looped plug point, TV point in each flat. It includes ISI marked

kv grade FRLS PVC insulated multistrand 2 wire 4 sq. mm copper wires

(G.F.Meter to All floor Units DB) + ISI marked 1.1 kv grade FRLS PVC insulated

multistrand 4 wire 6 sq. mm copper wires + ISI marked 1.1 kv grade FRLS PVC

insulated multistrand 2 wire 1.5 sq. mm copper wires (Covers all light, bell &

Fan points) + ISI marked 1.1 kv grade FRLS PVC insulated multistrand 2 wire

sq. mm copper wires (DB to Switch board, DB to 6/16 A plug point, Common

Area light point) , earth wire of 1.5 sq.mm , 2.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wire + 20mm to

32mm ISI mark Medium class RIGID PVC PIPES and accessories + 6A Modular

Type ISI marked flush type switch / bell push/ plug and accessories + Metal /

PVC Box covered with 3 mm thick PC(Polycarbonet) /Acrylic sheet + Lamp

holder/ceiling rose / H.D.Connector +

Gauge M.S. fan hook box / Heavy Duty PVC box +Electronic Hum free EME

Socket Type Steps Fan Regulator + 10 to 15 W Down Light , cool white with PC

diffuser suitable for B22 LAMP holder + Three phase 8 way SS Double door DB

(For Parking Area ,Stair Passage & Common Area) + Single phase 8 way SS

Double DB,4 Nos MCB & RCCB (In each Flat, Shopping Complex or directed

by Incharge engg.) + RG-6 TV Co-axial flexible solid bare copper cable +

MCB DP Encloser made from Steel Sheet + Junction Box + Blank plate etc. It

also includes common area light points (Parking, Passage, Staircase, Foyer,

Terrace) + All liasoning work to get meter and necessary permission to

complete Electrification work for all building premises (Flat, Lift, Plumbing

Load, Common Area etc.) Contractor has to complete all work using

necessary material or

2 item even and

Supplying it is not mention

LED . (Note.:-All

indoor wire LEDs

fittings with for Electric meter at

of wattage 0.2Ground

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light

with integral driver (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-

3 Supplying and erecting led lamps with following wattage capacity of 220 to 75.00 Ea. ₹ 165.64 ₹

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) Tube Light with integral driver (i) 5-10 Watts, Surge-2 KV,

IP-20, conventional 1 to 2 feet Cat-III

4 Supplying and erecting led lamps with following wattage capacity of 220 to 884.00 Ea. ₹ 112.11 ₹

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder (ii) 5 to

5 providing and erecting Miniature circuit breaker single pole 6A to 25A 2486.00 Ea. ₹ 112.11 ₹

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

6 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 41.00 Ea. ₹ 737.30 ₹

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (c)63 Amp.Cat.III

7 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) 1344.00 Ea. ₹ 295.93 ₹

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp.

8 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos. 1344.00 Ea. ₹ 108.07 ₹

No. Particulars Quantity Unit Rate Estimated cost

9 Providing and erecting Sheet Steel powder coated MCB distribution board - 1238.00 Ea. ₹ 1,152.41 ₹

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase

outgoing(b) sheet steel double door (IP-43)(iii)8 way

10 providing and erecting Approved make RCCBs conforming to IS: 12640 and 1238.00 Ea. ₹ 2,235.13 ₹

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (ii)

40Amps. DP Cat. III

11 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 120.00 Ea. ₹ 1,948.29 ₹

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

cms. down rod erected with 24/ 0.2, 3 core flexible wire with earthing.(Make

shall be approved by Engineer in charge)

12 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 60.00 Mtr. ₹ 108.07 ₹

down rod erected duly painted for fan complete with necessary 24/ O.20,

core flexible wire with earthing.

13 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 120.00 Ea. ₹ 108.07 ₹

RCC bars up to 50mm length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

14 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan 120.00 Ea. ₹ 18.18 ₹

15 Supplying & erecting single phase approved make industrial exhaust fan 89.00 Ea. ₹ 2,054.34 ₹

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM [A]

mm dia 900 RPM Cat.II

16 Supplying and erecting approved make oscillating type bracket fan A.C. 4.00 Ea. ₹ 2,534.09 ₹

23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and

rotary tilting device complete with guard, flexible Core plug top complete

erected with lead wires as directed. Cat.II

17 Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift ₹ - ₹ -

having following main features:

[1] GEAR LESS LIFT DRIVE Comprising of High Starting torque Lift 3 phase 440 V ₹ - ₹ -

A. C. Permanent Magnet Synchronous motor of proper rating with high

efficiency shall be used.[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop system shall be used for lift

car and door operation which shall be full collective selective operation hall

call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor

with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain the ₹ - ₹ -

impact load cabin + passenger with safety factor of fire for steel and side

panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S.

finishes with aesthetic appearance with LED ceiling lights. Car flooring shall be

of anti skid PVC with choice of colour of engineer in charge. Car doors shall

be of stainless steel grade 304, hairline finish with centre opening / telescopic

automatic doors. Car panel will also be S.S. 304 finished with emergency stop

device, mechanical door safety device, facility of auto/ attended mode. All

car panel buttons and all floor switches must be with brail language as per

[4] All landing doors must be fire rated for 2 hour shall be fully automatic ₹ - ₹ -

centre opening/ telescopic opening made of hairline finish steel grade of

with key holes and infrared curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided. Also, Emergency Light & Fan should start

immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor

position indicator shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall

be provided.[8] Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue Operation ( Manual

Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be

provided such that doors kept open till excess load is removed.

[10] Spring buffers/PU Buffers shall be provided. ₹ - ₹ -

[11] Car fan as per passenger capacity with automatic sleep timer shall be

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be

provided in control panel.

[14] Mechanical over speed governor with governor calibration as per actual

site parameters and submission of calibration certificate submission, door key

holes in the floor doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey

ladder for lift pit should be provided by the lift agency, along with the other

steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost,

where ever required as / if directed by engineer in charge.

No. Particulars Quantity Unit Rate Estimated cost

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, 0.00 ₹ - ₹ -

Over Voltage Under Voltage protection and THD eliminator in circuit for lift

machine room and lift well with proper numbers of light points, with fixtures,

exhaust fan and plug points shall be provided by the agency. Only 3 phase

Power Supply shall be made available by department in lift machine room.

Necessary Earthing as per Lift Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and

machine room related to erection of lift shall be made by lift agency without

any extra cost. (granite/marble fixing around all landing door openings are

not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison

services for obtaining all necessary permission from lift inspector and other

authorities. [20] acrylic transparent licence/display A4 size holder in lift

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 0.00 ₹ - ₹ -

2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and provide

report by third party authorized by concern licensing authority 5.agency

has to provide third party insurance upto completion of free maintenance

period and submit the document for the same.

4/5/6 Passengers, Ground plus 10 upper floors with Rated Speed of 2.0 / 2.5 12.00 Ea. ₹ 18,24,427.00 ₹

(A) With General Specification attached herewith. Cat.III ₹ -

4/5/6 Passengers, Ground plus 12 upper floors with Rated Speed of 2.0 /2.5 12.00 Ea. ₹ 19,84,258.00 ₹

(A) With General Specification attached herewith. Cat.III

4/5/6 Passengers, Ground plus 14 upper floors with Rated Speed of 2.0 /2.5 12.00 Ea. ₹ 21,45,275.00 ₹

(A) With General Specification attached herewith. Cat.III

4/5/6 Passengers, Ground plus 15 upper floors with Rated Speed of 2.0 / 2.5 12.00 Ea. ₹ 22,25,783.00 ₹

(A) With General Specification attached herewith. Cat.III

18 Providing & erecting approved make overload non-start feature & overload 54.00 Ea. ₹ 32,527.05 ₹

warning Indicator system in the lift with making use of sound isolated floating

platform & micro switches on SI frame to get sensation of live load inside lift

cage at any given moment, with provides new fixtures of overload warning

inside lift cage with new relay in the existing control panel to activate

‘Overload Non-Start Function with carrying out additional wiring including

laying of new travelling cable, include minor civil work & without changing

the existing capacity speed stops, travel & operation of the desired lift

19 Supplying rubber matting of following thickness as per IS:15652/IEC 61111 72.00 Sq.Mtr ₹ 1,027.17 ₹

20 SITC for Area Lighthing Protection System Franklin- France make Lightning 15.00 Ea ₹ 2,49,141.75 ₹

Arrestor consisting below mentioned main features :

Supply of advanced piezoelectric ceramic based Saint Elmo lightning

protection system suitable for protection of buildings against direct lighting

strike. Complete with Early streamer emission (with piezoelectric exciter device

for corona effect). The ESE terminal shall operate permanently for both

POSITIVE AND NEGATIVE lightning strikes. The lightning conductor shall have

no radio active source and shall not depend on any battery or external

power supplied for its operation. The capture head should be provided

inalterable and good conductor structured to generate a forced air

circulation at its tip and its prolongation (Venturi: Air intakes and peripheral

ejectors), complete as required. Should be tested and approved by Bazzet

Test Laboratory, France and CPRI, India.( With counter ) Radius of protection

in Level-1 79 mtrs.

21 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar

Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy

Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and positive power tolerance

Pmax: 0/+5, Module Efficiency should be approx. 18%-21%, Normal

operating temperature 45'C, Junction Box with Waterproof IP67 & MC4

Compatible and Enclosed with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-efficient of the PV module

shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year

Avg) With 10 year Product warranty and 25 year Linear Power Warranty.,

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p

Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1,

O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding

No. Particulars Quantity Unit Rate Estimated cost

22 Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output

Over Current Protection Integrated, Output Short Circuit Protection

Integrated, Output Over Voltage Protection Integrated, Protection Degree:

IP65, User Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi,

Module Mounting Structure: Seamless Box Pipe / 'C' Channel of suitable size

for rooftop solar installations with good stability agaist wind & weight load.,

Hot Dipped Galvanized steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be suitable for carry

the load of solar panel,wiring, sprinkler system etc. with necessary foundation

work/wall mount, j bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality. and Balane of System with necessary

Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting

wiring, earthing system, lightining arrester system, all liasoning work with various

gov. dipartment like state nodal agency,DISCOM & CEIG is included in

23 (Excluding GEDA Application fees, Solar connectivity Charges, Meter

connectivity Charges, Meter testing Charges.)

24 (D) Grid Tied Solar Power System: 26 - 50 kW (3 - phase) - (40 KW Per Nos 86.00 PER KW ₹ 42,156.39 ₹

Total of Internal Electric ₹

5 - External Electrification (Incl. D.G., Street Light)

1 Supplying and erecting LED street light / Flood light fittings with High power 160.00 Ea. ₹ 4,997.48 ₹

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (ii) above 48 to 60 Watts Cat-lll

2 (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and 16.00 Ea. ₹ 4,092.52 ₹

spun aluminum canopy fixed with opal polycarbonate, pipe arrangement

for vertical mounting driver and accessories wired upto terminal block.IP

(i)20- 30W Cat-lll

3 Supplying and erecting approved make Octagonal pole made from HR 74.00 Ea. ₹ 13,680.06 ₹

sheet steel. The pole should be made as per IS. and shall be coated with hot

dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer considering site

requirement.(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

4 Providing and erecting street light pole bracket comprising main B Class MS 74.00 Ea. ₹ 1,117.56 ₹

pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require

size pole top having sufficient fasteners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per site condition & suitable

welded stiffener reducer and nipple with check nut complete painted with

one coat of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.[A] Single Arm bracket 1 Mtr

5 Providing & laying approved make Double walled corrugated pipes (DWC) 3160.00 Mtr ₹ 146.73 ₹

of polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (B)63mm outer dia

6 Providing and erecting metallic vitrified danger notice board as per 38.00 Ea ₹ 69.69 ₹

language suggested by engineer incharge for MEDIUM VOLTAGE installation

to be erected as per IS-2551.

7 Providing and erecting Approved make Four pole moulded case circuit 76.00 Ea. ₹ 6,173.12 ₹

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

8 Providing and erecting Approved make Four pole moulded case circuit 26.00 Ea. ₹ 16,221.61 ₹

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S.housing ICS=100% of ICU only

9 Providing and erecting Approved make Four pole moulded case circuit 14.00 Ea. ₹ 25,228.79 ₹

breaker having breaking capacity ICU of 50 KA and above at 415 V having

Normal current rating 400A. with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. With all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

10 Supplying and erecting triple pole & neutral 440V/ 500V panel mounting 63.00 Rn.Mtr ₹ 660.54 ₹

Aluminium Busbars with four equal Nos. of bus having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main

cable socket to each busbar,erected in existing cubical panel with

necessary connections.(A) Suitable for 100 Amp. Capacity

No. Particulars Quantity Unit Rate Estimated cost

11 (B) Suitable for 200 Amp. Capacity 34.00 Rn.Mtr ₹ 1,037.27 ₹

12 (D) Suitable for 400 Amp. Capacity 38.00 Rn.Mtr ₹ 2,204.83 ₹

13 Supplying & erecting approved make Digital time switch having lithium cell 6 14.00 Ea ₹ 3,168.37 ₹

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed.

14 Supplying & erecting power contactor for time switch complete erected as 14.00 Ea ₹ 1,883.65 ₹

per direction Cat III

[B] 2 pole 250V 32 Amp.

15 Providing & erecting weather proof, dust & vermin proof, floor mounted front 94.00 Sq.Mtr ₹ 14,902.55 ₹

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-

charge with erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessaryventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating.

(B) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (1 )(The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured excluding base beams)

The panel shall be supplied with following approved manufacturers with

following size.(B) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factorhity (1 )with 350mm depth

16 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved 64.00 Ea ₹ 5,842.85 ₹

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test certificate

including value of earth resistane of installation.[A] For electrical installation

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

17 [C] For Electrical Installation covering Transformer Neutrals, Lightning 44.00 Ea ₹ 10,593.89 ₹

arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

18 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 216.00 Kg. ₹ 794.87 ₹

19 Providing and erecting required size Copper strip for earthing of H.T. OCB / 440.00 Kg. ₹ 794.87 ₹

ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

20 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 850.00 Mtr. ₹ 217.15 ₹

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core)

24 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium 4080.00 Mtr. ₹ 77.77 ₹

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables. (A) 2 core 4 Sq. mm

25 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 1125.00 Mtr. ₹ 124.23 ₹

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

(b) 4 core 6 Sq. mm

27 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 237.50 Mtr. ₹ 151.50 ₹

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables (A) 4 core 16 Sq. mm

28 Making trench in soft soil of suitable width of 90 cms deep for laying cable or 2400.00 Mtr. ₹ 46.46 ₹

locating the fault all over the run and backfilling the same and making the

surface as normal ground.

29 Providing and, fixing heavy duty flange type brass cable gland with rubber 960.00 Ea. ₹ 38.38 ₹

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(b) 2 to 4 core 4 Sq. mm

32 Providing and, fixing heavy duty flange type brass cable gland with rubber 48.00 Ea. ₹ 75.75 ₹

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(B) 3 & 1/2 core 35/50 Sq. mm

No. Particulars Quantity Unit Rate Estimated cost

36 Solderless crimping type Copper lugs conforming to IS suitable for cable of 5600.00 Ea. ₹ 8.08 ₹

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

41 Supplying and erecting approved make panel mounting type Digital 16.00 Ea. ₹ 1,558.43 ₹

Ammeter having 3 digits LED display, external CT operated, calibrated for

to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel

board with all connection, wiring etc .with manufacturers calibration

42 Supplying and erecting approved make panel mounting type Digital 16.00 Ea. ₹ 1,275.63 ₹

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc .with manufacturers

calibration certificate.

43 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 16.00 Ea. ₹ 317.14 ₹

Supply 500 V on existing panel board with necessary connections.

44 Supplying & erecting approved make Power Factor Meter 150mm dia 16.00 Ea. ₹ 5,102.52 ₹

flush/projection type/ balanced & unbalanced load to work with

appropriately provided CT’s 100/5A to 400/5A ratio & other accessories

complete erected in M.S. box & connected to the circuit by means of PVC

copper Core leads.

45 Supplying and erecting approved make set of indicator lamps of LED type 64.00 Ea. ₹ 43.43 ₹

lamp, lens cover, Bakelite holder complete erected with necessary

46 Providing & erecting open well horizontal mono block pump set with cast iron 15.00 Ea ₹ 28,464.83 ₹

body, complete for three phase submersible motor having [F] For 10 HP

phase open well horizontal mono block pump set suitable for 1725 LPM to

940 LPM @ 15 to 36 MTR head suitable for 65/80 mm dia delivery pipe

47 Supplying & erecting approved make 3 phase motor control cubical panel ( 15.00 Ea ₹ 13,605.71 ₹

Star - Delta) made from16 G. CRCA sheet duly painted with epoxy powder

painted inside and outside with hinged doors and locking arrangement,

consisting of suitable size of ON- OFF isolator (AC - 3/23 duty) main fuses,

single phasing preventer cum water level. Guard (Complete unit), Toggle

switch to by pass Single phase preventer cum WLG, indicating lamps for R- Y-

B phases, over load relay, Automatic water level controller, Ammeter &

Voltmeter each with two way selector switch incoming wires duly socket

Crimped, Panel to be erected on angle iron frame grouted on wall as

directed. Star Delta & main contactor, overload relay, thermal / Electronic

Star delta cutoff timer, start - stop push buttons. The isolator overload relay &

contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be erected

on angle iron frame ground on wall. (B) S/D up to 10 H.P.

Lowering of submersible motor pump set at the depth of following ,complete

with required. Nos. and size of casing pipes erected by means of proper

chain pulley block & pipe wrenches after checking of threads of each pipe

with coupling to take the load of the pump set and pipe assembly filled up

48 (D)For Open well Horizontal submersible pump set for sump well(ii) 7.5HP to 12.00 Ea ₹ 1,284.72 ₹

49 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 1000.00 Mtr ₹ 146.45 ₹

Submersible copper cable approved make of following Size. (C) 3 Core x

50 Providing Water proof straight Joint in PVC insulated flat flexible copper 48.00 Ea. ₹ 189.88 ₹

cable by using insulating material, water proofing material, & making the

joint complete. (A) Up to 10Sq. mm

51 Supplying & erecting UPVC heavy duty Flanges with rubber packing and 48.00 Ea. ₹ 184.83 ₹

hardware materials for pipe connections suitable for (B) 65 mm (2.5")

52 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI 32.00 Ea. ₹ 1,020.10 ₹

marked suitable for following size (A) 50 mm dia.

53 Supplying of following size of HEAVY UPVC column pipe with coupler and 720.00 RMT. ₹ 493.89 ₹

wire lock [C] 65 mm dia

54 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) 16.00 Per Set ₹ 1,900.82 ₹

long, pump guard set, starter pipe Rubber ring for submersible pump &

UPVC column pipe as directed by Engineer - in - charge with necessary

plumbing as desired.[E] 65 mm dia

55 Supplying rubber matting of following thickness as per IS:15652/IEC 61111 16.00 Sq.Mtr ₹ 1,027.17 ₹

56 Supplying stand first AID box with antiseptic cream, medicine for use on 16.00 Ea. ₹ 214.12 ₹

wounds due burn, crepe bandage, gauge bandage, medicated ready to

use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-

septic solution (Savlon or similar) etc. (All above contents shall be of standard

57 Supplying and erecting, commissioning and testing of Diesel Generating set 0.00 ₹ - ₹ -

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled

diesel engine with multi-cylinders developing suitable BHP not less than

following capacity at 1500 RPM with 10% overload for one hour in 24 hours

with standard accessories like fly wheel, lubricating oil cooler, "A" class

governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler,

lubricating oil pressure gauge, end exhaust manifold, standard set of tools

with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder

head to exhaust, element lube oil filter, 12 / 24 volts electric starting

equipment complete with standard heavy duty battery, dynamo, cut-outs,

ammeter, necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer and vertical hot air duct both

No. Particulars Quantity Unit Rate Estimated cost

58 logged with asbestos rope, save oil trays, exhaust piping of required length, 0.00 ₹ - ₹ -

standard wall/floor mounted fuel with level indicator and piping and drip

proof alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts, 3 phase,

0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with

voltage regulation +/- 5% of rated voltage from no load to full load. Both

the engine and alternator fitted on a common fabricated steel base plate

with antivibration mounting engine and alternator both connected to

each other by flexible flange coupling and with floor/wall mounted control

panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB

/ MCB of adequate capacity,

59 indicator lamps duly wired with HRC fuses. The alternator & control panel 0.00 ₹ - ₹ -

shall be connected with provided suitable capacity armoured cable and

complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA

Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick

conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin

bonded rockwool covered from inside the canopy by perforated sheet with

3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per

PVCT norms. Erection, commissioning and satisfactory testing as per

requirement with first filling of fuel, oil, etc. with guarantee / Warrantee of

complete system for Two years. & with obtaining all necessary certificate from

Electrical Inspector. The Capacity and Ratings of DG sets are as below.

60 (R) Continuous rating of 250 KVA ,BHP not less than 309 BHP 0.00 Ea ₹ 15,77,313.97 ₹ -

61 (M) Continuous rating of 125 KVA ,BHP not less than 154 BHP 0.00 Ea ₹ 8,24,178.18 ₹ -

62 (L) Continuous rating of 100 KVA ,BHP not less than 126 BHP 8.00 Ea ₹ 7,75,390.13 ₹

63 Providing & erecting approved make AMF control panel suitable for following 1.00 Ea ₹ 2,22,714.09 ₹

size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of

scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for

mains & generator) Overload relay for generator contactor Neutral

contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage

monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation.

Auto/manual switch. Emergency stop push buttons. Manual start push

button. frequency meter. Engine hour meter. Two earthing studs. 3)

Protection module: The engine shutdown in the unlikely event of Low lube oil

pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery

The AMF Panel of following capacity (D) AMF Control Panel for200 KVA/250

KVA3 phase DG Set

65 Supply of 250 KVA Outdoor type Compact Substation consisting of 6.00 ₹ 1,21,201.01 ₹

Transformer,HT switchgear and LT Switchgear and confirming to IEC-62227. a)

Transformer: 250 KVA Copper wound 11KV /433 V DYn11, Dry Cast resin type

Transformer with tapping range +10 to -10% @ 2.5% ( with tolerance), class F

with surge restorers, Digital WTI, IS1171 as per b) HT Compartment: 11KV, 21kA

for 3 Sec . 630 A 50 Hz, gas insulated VCB in SS tank in sheet enclosure having

provision for one no. direct connection of Incoming supply cable upto 300sq

mm and one no. VCB( Manually charging & closing) in series with LBS

between VCB and Transformer, Self Powered Relay 3 O/C +1 E/F Relay type

CSPR-V5, mechanical ON/OFF indicator, trip coil , Manual Close & Trip PB,

live cable indicator, mechanical interlocks, pad locking facility, SF6 gas

manometer, cable boots, 3 nos. CTs with Ratio -/1A, Cl: 5P10, 2.5 VA for

protection c) LV side compartment : one no. MCCB of 400A, 36kA, 4Pole,

Microprocessor based release with arrangement for bottom cable

( 100% for phase & 50% for N, Current density - 1A/ sq mm) The enclosure

should be of IK10 type.The Enclosure shall construction shall be GI of

thickness at least 1.6/2mm.The enclosure shall be Powder Coated. Each

compartment will be provided with the door and pad locking arrangement.

The Compartment illumination lamp with door operated switch shall be

provided for each compartment. The Transformer compartment will have IP-

34 ingress protection, whereas the HT/LT compartment will have IP-54

protection.The connection between HT and Transformer shall be by 3 runs of

single core 95 sq mm XLPE aluminium cable and between Transformer to LT

switchgear shall be by appropriate Aluminium PVC sleeved Busbar

Add extra Rs 9000/- for integrated steel cubical panel IP 54 to house upto

Nos additional outgoing switchgears with proper rating busbar drop,supports

etc with arrangment for cable termination etc.( Switchgears is not included in

Add extra Rs 16000/- for integrated steel cubical panel IP 54 to house upto 12.00 Ea ₹ 3,11,564.80 ₹

06 Nos additional outgoing switchgears with proper rating busbar

drop,supports etc with arrangment for cable termination etc.( Switchgears is

not included in this)

66 Providing, and erecting 11 KV D.P. 9 mtr. high Structure made of 6" x 3" ‘I’- ₹ -

Section Girder, 4" x 2"channels, clamps, nuts, bolts etc. Suitable for erection of

the followings duly connected with necessary ACSR conductors. as per

drawing approved by the Engineer- in charge complete with following.

Height as per IS 7 Mtr above ground )

(A) 11 KV 200 Amps Drop out fuses with S.R.B.P. tubes carries.-Three nos

(B) 11 KV G.O.D. switch complete with insulators, operating handle with

galvanised pipe, Sq.bar etc. 400 Amp.- One Set

(C) 11 KV lightening arrestor with clamp- Three Nos.

(D) 11 KV shackle insulators- Six Nos.

(E) The above D.P. structure should be earthed with 25 mm.X 3 mm thick 12.00 Ea ₹ 98,433.59 ₹

double copper earth strips run separately and connected with separate

copper plate earth electrode.

67 (C) AMF Control Panel for100 KVA/125 KVA3 phase DG Set 2.00 Ea ₹ 1,21,201.01 ₹

No. Particulars Quantity Unit Rate Estimated cost

68 COMMON PANELS FOR RESIDENTIAL ₹ -

68.01 400A FP MCCB Cat.III 12.00 Ea. ₹ 25,228.79 ₹

68.03 Rotary handle 12.00 Ea. ₹ 420.16 ₹

68.04 Rotary handle 8.00 Ea. ₹ 754.47 ₹

68.05 Intirior Change over Switch 400A Capacity as per DG 8.00 Ea. ₹ 22,255.35 ₹

68.06 Panel Fabrication With 350 mm. Depth (CPRI) 48.00 Sq.Mtr ₹ 11,466.53 ₹

68.07 100A AL. Busbars - 1 mtr. 96.00 Rn. Mtr. ₹ 660.54 ₹

68.08 Neutral Links - 1 no. 256.00 Ea. ₹ 137.36 ₹

68.09 Load Manager Schneider EM6400 8.00 Ea. ₹ 41,226.18 ₹

68.1 Mutli Funcation Meter Schneider Multi-Function Meter 8.00 Ea. ₹ 8,818.31 ₹

METSEEM6400NGPOCL1

68.11 FP SPD (1.4KV- 40KA,8/20 micro second) Schneider Electric Acti9 iPRD40R 40kA 8.00 Ea. ₹ 21,773.58 ₹

Three Pole+N Modular Surge Arrester with Remote Transfert, A9L40601

68.12 selector switch - 1 nos. 24.00 Ea. ₹ 317.14 ₹

68.13 Indicating Lamps 72.00 Ea. ₹ 43.43 ₹

68.15 Power cable 16 sqmm 88.00 Mtr. ₹ 135.34 ₹

68.16 Control cable 2.5 sqmm 264.00 Mtr. ₹ 26.26 ₹

69 COMMON PANELS FOR COMMON ₹ -

69.01 400A FP MCCB Cat.III 8.00 Ea. ₹ 25,228.79 ₹

69.02 250A FP MCCB Cat.III 8.00 Ea. ₹ 20,946.39 ₹

69.03 125A FP MCCB Cat.III 8.00 Ea. ₹ 8,055.76 ₹

69.04 100A FP MCCB Cat.III 16.00 Ea. ₹ 6,173.12 ₹

69.07 Rotary handle 88.00 Ea. ₹ 420.16 ₹

69.08 Rotary handle 24.00 Ea. ₹ 754.47 ₹

69.09 Intirior Change over Switch 400A Capacity as per DG 8.00 Ea. ₹ 22,255.35 ₹

69.1 Panel Fabrication With 350 mm. Depth (CPRI) 56.00 Sq.Mtr ₹ 11,466.53 ₹

69.11 400A AL. Busbars - 1 mtr. 32.00 Rn. Mtr. ₹ 2,204.83 ₹

69.12 200A AL. Busbars - 1 mtr. 16.00 Rn. Mtr. ₹ 1,037.27 ₹

69.13 100A AL. Busbars - 1 mtr. 48.00 Rn. Mtr. ₹ 660.54 ₹

69.14 Neutral Links - 1 no. 88.00 Ea. ₹ 137.36 ₹

69.15 HRC control fuses - 32.00 Ea. ₹ 98.98 ₹

69.16 Load Manager Schneider EM6400 8.00 Ea. ₹ 41,226.18 ₹

69.17 Mutli Funcation Meter Schneider Multi-Function Meter 8.00 Ea. ₹ 8,818.31 ₹

METSEEM6400NGPOCL1

69.18 FP SPD (1.4KV- 40KA,8/20 micro second) Schneider Electric Acti9 iPRD40R 40kA 8.00 Ea. ₹ 21,773.58 ₹

Three Pole+N Modular Surge Arrester with Remote Transfert, A9L40601

69.19 selector switch - 1 nos. 24.00 Ea. ₹ 317.14 ₹

69.2 Indicating Lamps 72.00 Ea. ₹ 43.43 ₹

69.22 Power cable 16 sqmm 56.00 Mtr. ₹ 135.34 ₹

69.23 Control cable 2.5 sqmm 112.00 Mtr. ₹ 26.26 ₹

Total of External Electrification ₹

6 - Paver block

1 Excavation for road work including bituminous surface upto 30 cm depth*Note: For 8160.00 Sqm. ₹ 15.00 ₹

addl. depth @ every 5 cm rate will be increased Rs. 0.50 per sq. mtr. upto addl.

depth of 35 cm For depth above 35 cm, the rate for the excavation will be given on

2 Carting, disposing & removal of Excavated Stuff within RMC limit as directed by 2448.00 Cum. ₹ 171.00 ₹

Engineer-in-Charge with suitable means incl. loading, unloading, transporting and

disposal the surplus excavated stuff with all required lead & lift etc. complete as

3 Rolling work with vibratory power roller 8-10 Ton capacity over metalling murrum for 8160.00 Sqm. ₹ 9.00 ₹

soling or single layer arriving proper compaction (with watering) of the excavated

road way supporting sub-grade to the required line, grade & profile in layers to meet

requirement of table 300-2 (MoRTH) for sub-grade construction as directed by the

Engineer by suitable means to achieve the desired compacted density etc. complete

4 Filling in layers of 0.23 m thick including murrum and sprinkling of water, 4896.00 Cum. ₹ 347.00 ₹

compaction etc. complete

5 Construction of 150.00 MM compacted thickness of granular sub-base by providing 1225.00 Cum. ₹ 753.00 ₹

close graded material, spreading in uniform layers with motor grader on prepared

surface, mixing by mix in place method with rotavator at OMC and compacting with

vibratory roller to achieve the desired density complete (Grade-I)

6 Providing & laying CC work in proportion of 1:3:6 using 1.5 cm to 2.0 cm aggregate 816.00 Cum. ₹ 3,965.00 ₹

including Raming, Curing etc.

7 Supply & Fixing of 80mm M-30 Grade cement concrete rubber mold paving inter 8160.00 Sqm. ₹ 581.00 ₹

locking paving block (Grey colour) after beding of Bhogavo sand in line and CC on

the edge in proportion of 1:2:4 with curing etc. complete.

Total of Paver Block ₹

7 - R.C.C. Road

1 Excavation for road work including bituminous surface upto 30 cm 4020.00 Sqm. ₹ 15.00 ₹

depth*Note: For addl. depth @ every 5 cm rate will be increased Rs. 0.50 per

sq. mtr. upto addl. depth of 35 cm For depth above 35 cm, the rate for the

excavation will be given on CuM basis

2 Carting, disposing & removal of Excavated Stuff within RMC limit as directed 1206.00 Cum. ₹ 171.00 ₹

by Engineer-in-Charge with suitable means incl. loading, unloading,

transporting and disposal the surplus excavated stuff with all required lead &

lift etc. complete as directed.

3 Rolling work with vibratory power roller 8-10 Ton capacity over metalling 4020.00 Sqm. ₹ 9.00 ₹

murrum for soling or single layer arriving proper compaction (with watering) of

the excavated road way supporting sub-grade to the required line, grade &

profile in layers to meet requirement of table 300-2 (MoRTH) for sub-grade

construction as directed by the Engineer by suitable means to achieve the

desired compacted density etc. complete as directed.

4 Filling in layers of 0.23 m thick including murrum and sprinkling of water, 2412.00 Cum. ₹ 347.00 ₹

compaction etc. complete

No. Particulars Quantity Unit Rate Estimated cost

5 Construction of 150.00 MM compacted thickness of granular sub-base by 603.00 Cum. ₹ 753.00 ₹

providing close graded material, spreading in uniform layers with motor

grader on prepared surface, mixing by mix in place method with rotavator at

OMC and compacting with vibratory roller to achieve the desired density

complete (Grade-I)

6 Providing & laying CC work in proportion of 1:3:6 using 1.5 cm to 2.0 cm 402.00 Cum. ₹ 3,965.00 ₹

aggregate including Raming, Curing etc.

7 Cement Concrete Pavement M-35 804.00 Cum. ₹ 5,626.00 ₹

Construction of un-reinforced, dowel jointed, plain cement concrete

pavement over a prepared sub base with 43/53 grade cement @ 380 kg per

cum, coarse and fine aggregate conforming to IS 383, maximum size of

coarse aggregate not exceeding 25 mm, mixed in a batching and mixing

plant as per approved mix design, transported to site, laid with a fixed form

or slip form paver, spread, compacted and finished in a continuous

opeproportion including provision of contraction, expansion, construction

and longitudinal joints, joint filler, separation membrane, sealant primer, joint

sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing

compound, finishing to lines and grades as per drawing.

8 Supplying, Cutting, Beding, Binding and Hooking and binding with wire for 28140.00 Kg. ₹ 65.00 ₹

RCC work Tor steel TMT (Fe-500/500D) round bar including all cost.

9 Providing Trimix finishing to the finished surface of top concrete by vaccume 4020.00 Sqm. ₹ 70.00 ₹

dewatring and finishing with power driven trowly by approved agency

etc.complete as directed.

10 Construction of cement concrete kerb with top and bottom width 120 and 34.00 Cum. ₹ 650.00 ₹

220mm respectively, 400mm high in M20 grade. kerb stone laid with kerb

laying machine (L-Section)

11 Enemal painting two coat and including primer and preparing the surface 384.00 Sqm. ₹ 125.00 ₹

by throughly cleaning oil, grease, dirt and other foreign matter, sand

papering and knotting.

Total of RCC Road ₹

8 - Fire Fighting (Incl. Fire UGT & Pumping Machineries)

1 Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe 1025.00 Rmt. ₹ 2,375.00 ₹

conforming to IS 1239 including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required 150mm Dia

2 Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe 780.00 Rmt. ₹ 3,574.00 ₹

conforming to IS 1239/3589 including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required 150mm Dia

3 Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe 710.00 Rmt. ₹ 2,555.00 ₹

conforming to IS 1239/3589 including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required 100mm Dia

4 Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe 184.00 Rmt. ₹ 1,885.00 ₹

conforming to IS 1239/3589 including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required 80mm Dia

5 Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe 1140.00 Rmt. ₹ 1,281.00 ₹

conforming to IS 1239/3589 including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required 50mm Dia

6 Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe 966.00 Rmt. ₹ 1,034.00 ₹

conforming to IS 1239/3589 including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required 40mm Dia

7 Providing, laying, testing & commissioning of 'C' class heavy duty M.S. pipe 2090.00 Rmt. ₹ 744.00 ₹

conforming to IS 1239/3589 including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required 25mm Dia

8 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type 804.00 No. ₹ 522.00 ₹

Pendent sprinklers of rating 68 degree centigrade with required accessories

9 Fire Detection System SITC of UL Listed, Analogue Addressable Microprocessor 3.00 No. ₹ 2,00,000.00 ₹

based 02 loop fire alarm control panel expandable up to 8 loop capable of

taking minimum 180 detectors and 180 devices per loop like MCP, Hooters,

control modules, response indicators etc. and shall contain central

processing unit, LCD Display up to 960 character as per the detailed

specification complete with battery backup of 24 hours operation and

minutes alarm operation with battery charger and annunciator window etc.

System shall have provision to integrate with life safety facilities. i.e. HVAC, PA

Lift or elevator by providing NO/NC contacts and BMS compatibility shall be

through MODBUS/Bacnet protocol. The Panel as well as detectors and

devices shall be UL 9th edition Approved/Listed and in conformance with

international standards such as NFPA 72 components conforming to these

standards. Loop cards to be included in this item.

No. Particulars Quantity Unit Rate Estimated cost

10 Supplying and fixing single headed internal / external hydrant valve with 266.00 No. ₹ 8,585.00 ₹

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron

wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal and

chain as required

11 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm 266.00 No. ₹ 2,828.00 ₹

nominal internal diameter size nozzle conforming to IS 903 suitable for

instantaneous connection to interconnect hose pipe coupling as required:

12 Supplying and fixing first-aid Hose Reel with MS construction spray painted in 280.00 No. ₹ 8,675.00 ₹

post office red, conforming to IS 884 complete with the following as

required.20 mm nominal internal dia gun metal globe valve & nozzle. Drum

and brackets for fixing the equipmets on wall. Connections from riser with

mm dia stop gun metal valve & M.S. Pipe and socket (30 mt. long)

13 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia 280.00 No. ₹ 5,757.00 ₹

male and female couplings duly bound with GI wire, rivets etc. conforming to

IS 636 (type-A) as required Gun metal

14 Supply, Installing, Testing & Commissioning of M.S. Hose Box (having size 450 x 280.00 No. ₹ 3,726.90 ₹

600 x 250 mm) suitable to accommodate 02 No. of 15m long fire hoses and

No. of nozzle, with lock-n-key facility, wall mounting design.

15 Supply, Installing, Testing & Commissioning of Fire Alarm System including 280.00 No. ₹ 14,140.00 ₹

hotter, call point, On-Off Switch with PVC pipe, wire and panel for hotter

and call point etc. complete.

16 Supply & Installing of Gas - Co2 Type – 4.5 Kg, capacity duly ISI marked 308.00 No. ₹ 13,180.50 ₹

conforming to IS 15683 with hor, valve locking arrangement, operation

manual with bracket etc. complete.

17 Supply and Installing of ABC Type 6-Kg, Capacity duly ISI marked confirmed 308.00 No. ₹ 4,114.74 ₹

to IS 15863 : 2006 with IS 14609 ISI marked powder complete with squeeze grip

release valve, locking arrangement, pressure gauge operation manual with

bracket, etc. complete.

18 Providing, installation, testing and commissioning of non-return valve of 28.00 set ₹ 17,786.00 ₹

following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts,

nuts, washers etc.as required 150mm Dia

19 Providing, installation, testing and commissioning of non-return valve of 16.00 set ₹ 11,050.00 ₹

following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts,

nuts, washers etc.as required 100mm Dia

20 Providing, installation, testing and commissioning of non-return valve of 2.00 set ₹ 7,691.00 ₹

following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts,

nuts, washers etc.as required 80mm Dia

21 Supplying, fixing, testing & commissioning of double flanged sluice valve of 4.00 set ₹ 22,762.00 ₹

rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked

complete with nuts, bolts, washers, gaskets and conforming to IS 780 of

following sizes as required

22 Supplying, fixing, testing & commissioning of double flanged sluice valve of 2.00 set ₹ 10,696.00 ₹

rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked

complete with nuts, bolts, washers, gaskets and conforming to IS 780 of

following sizes as required

23 Supply, Installing, Testing & Commissioning of 150 mm C.I. Foot valve Flange 4.00 set ₹ 13,000.00 ₹

endrd & Double Flap with ISI-4038 mark & as per Fig.-2 for Entire System with all

type of fitting & fixtures etc. necessary complete.

24 Supply, Installing, Testing & Commissioning of 80 mm C.I. Foot valve Flange 2.00 set ₹ 6,000.00 ₹

endrd & Double Flap with ISI-4038 mark & as per Fig.-2 for Entire System with all

type of fitting & fixtures etc. necessary complete.

25 Providing, installation, testing and commissioning of uPVC Ball valve of 3.00 set ₹ 350.00 ₹

following sizes confirming to IS complete with rubber gasket, GI bolts, nuts,

washers etc.as required 50mm Dia

26 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating 12.00 set ₹ 8,960.00 ₹

with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095 of following sizes as required

27 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating 14.00 set ₹ 6,667.00 ₹

with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095 of following sizes as required

28 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating 30.00 set ₹ 4,982.00 ₹

with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095 of following sizes as required

29 Supply, Installing, Testing & Commissioning of 25mm Dia. Air Valve for air 19.00 No. ₹ 1,212.00 ₹

release including nipple etc. necessary complete suitable for pipe and

fittings. (Rising Main at OHT)

30 Supply, Installing, Testing & Commissioning of 100mm Dia. Pressure Gauge 1% 19.00 No. ₹ 1,900.00 ₹

Accuracy Direct Bottom 3/8” BSP connection in Brass Socket & Range 0 to

Kg/Cm2 etc. necessary.

31 Supplying and fixing of 4-way fire brigade connection of cast iron body with 2.00 set ₹ 13,974.00 ₹

gun metal male instantaneous inlet couplings complete with cap and chain

as reqd. for suitable dia MS pipe connection conforming to IS 904 as required

32 Supplying and fixing of 2-way fire brigade connection of cast iron body with 13.00 set ₹ 6,742.00 ₹

gun metal male instantaneous inlet couplings complete with cap and chain

as reqd. for suitable dia MS pipe connection conforming to IS 904 as required

No. Particulars Quantity Unit Rate Estimated cost

33 Supplying, installation, testing and commissioning of electric driven terrace 13.00 set ₹ 1,01,859.00 ₹

pump suitable for automatic operation and consisting of following, complete

in all respects, as required:

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron

body & bronze impeller with stainless steel shaft, mechanical confirming to IS :

b) Suitable HP squirell cage induction motor TEFC type suitable for operation

on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for

enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming

(c) M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered and with anti

900 LPM at 35m head

34 Testing, Supply, Installing & Commissioning of Diesel Driven Pump required 2.00 set ₹ 6,35,909.00 ₹

Cap.2280 LPM . 88 mt Head with Panel , Necessary Cable for pump to panel,

And Staneer at suction end etc. necessary.

35 Testing, Supply, Installing & Commissioning of Electric Driven Pump of required 2.00 set ₹ 4,03,506.00 ₹

Cap. 180 LPM. 88-Mtr. Head with Panel , Necessary Cable for pump to

panel, And Staneer at suction end etc. necessary.

36 Testing, Supply, Installing & Commissioning of Jockey Pump Cap. 180 LPM. 2.00 set ₹ 1,27,148.00 ₹

and 70 to 88-Mtr. Head with Panel , Necessary Cable for pump to panel,

And Staneer at suction end etc. necessary.

37 Providing and Fixing "EMERGENCY EXIT" Signage, auto glow sticker in 3 or 5 234.00 No. ₹ 800.00 ₹

mm pvc sheet size 150 mm x 450mm. All complete as per direction of engineer-

in-charge / Fire Officer. (On each Floor)

38 Providing and Fixing "DO NOT USE IN CASE OF FIRE" Signage , auto glow sticker 234.00 No. ₹ 500.00 ₹

in 3 or 5 mm pvc sheet size 150 mm x 250mm. All complete as per direction of

engineer-in-charge / Fire Officer. (Near to Lift on each Floor)

39 SYSTEM CONTROLLER PANEL 15.00 No. ₹ 2,45,730.00 ₹

Fabrication, supply, installation testing & commissionning of electrical control

panel of cubical construction, floor mounted type, fabrication out of 2mm

think CRCA steer, compartmentalised with hinged lockable door, dust and

vermin proof, powder coated of approved shade after 7 tank treatment

process, cable/solid copper strip, having switchgears and accessoris,

mounting and internal wiring, earth terminals, numbering etc. complete in all

respect, suitable for main fire pump, specification with following in coming

and Outgoing, suitable for operation on 415V, 3 phese, 50Hz Ac Supply with

enclosure protection calss IP 42 as required :

250A, 50kA 4 pole MCCB, 100% lcu ration Digital Voltmeter 0-500V with

selectore switch Digital Ammeter (0-250 A) with selectore switch & CTs etc. LED

type RYB phase indicating lamp , ON, OFF, trip indicating Lamps Set of

Copper Bus Bar 300A

Note: All outgoing feeders for pumps should have digital Ammeter with

selector switches, and LED type ON, OFF, trip indicating lamp

SYSTEM CONTROLLER

Designing, Supply, Installation , Testing and commissining of system controller

operetion of Terrace pump in sequence as per specification consisting of

relays, timers, sensors, annunciation window for fault indication, complete as

per specification

40 Providing, installation, testing and commissioning of uPVC Ball valve of 12.00 set ₹ 281.16 ₹

following sizes confirming to IS complete with rubber gasket, GI bolts, nuts,

washers etc.as required 25mm Dia

Total of Fire ₹

9 - Water Supply (Incl. Domestic UGT)

1.1 Excavation of trench for Pipes in Soft Murrum / Clay / Sand with all safety 890.00 Cum. ₹ 151.00 ₹

Provisions (with re-filling of trench) for depth from 0.0 to 1.5 mtr

1.2 Excavation of trench for Pipes in Hard Murrum with all safety Provisions (with re- 297.00 Cum. ₹ 160.00 ₹

filling of trench) for depth from 0.0 to 1.5 mtr

1.3 Excavation of trench for Pipes in Soft Rock with all safety provisions (with re- 297.00 Cum. ₹ 345.00 ₹

filling of trench) for depth from 0.0 to 1.5 mtr.

2 Filling of Plinth in layers of 0.23 m thick including murrum and sprinkling of 126.00 Cum. ₹ 347.00 ₹

water, compaction etc. complete

3 Ductile Iron Pipes with internal cement mortar lining and external Zinc coating 0.00 ₹ -

with finishing layer of Bitumen; manufactured, tested and duly marked in

strict accordance with and confirming to IS: 8329/2000 (as per latest

amendment); suitable for push-on Jointing, along-with one number Rubber

Gaskets for each length of pipe (EPDM Gasket as per IS: 5382/1985).

100 mm Diameter (Class - K7) 350.00 Rmt. ₹ 968.00 ₹

4 Lowering, laying & jointing DI pipe with CI / DI / MS special in proper position, 350.00 Rmt. ₹ 6.00 ₹

grade and alignment as directed by engineer-in-charge for 80-100 mm dia

5 Ductile Iron fittings like, bends, tees, reducers or any other specials with ISI-

9523-2000 (as per latest amendment) mark. Use with D.I. Pipes manufactured

with ISI-8329_1994 (With external bitumen & zinc coating & internal cement

of GWSSB approved vendor.

A Socket & Spigot Type) 80 mm Ø to 300 mm Ø., 72.00 Kg. ₹ 180.00 ₹

B Flanged Ended) 80 mm Ø to 300 mm Ø. 90.00 Kg. ₹ 190.00 ₹

5 Providing laying and jointing in true line and level of following dia.& wall

thickness U.P.V.C. Pipe (SCH- 40) including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including necessary

fittings like Tee, Elbow, Coupler, Reducer, Brass Elbow, Brass Tee, Brass

Reducern Brass MTA & FTA etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

A For 80 mm Ø. (5.49 mm min. wall thickness) 1440.00 Rmt. ₹ 354.42 ₹

No. Particulars Quantity Unit Rate Estimated cost

B For 65 mm Ø. (5.16 mm min. wall thickness) 2602.00 Rmt. ₹ 261.93 ₹

C For 50 mm Ø. (3.91 mm min. wall thickness) 1584.00 Rmt. ₹ 164.46 ₹

D For 40 mm Ø. (3.68 mm min. wall thickness) 1728.00 Rmt. ₹ 124.56 ₹

E For 32 mm Ø. (3.56 mm min. wall thickness) 1440.00 Rmt. ₹ 106.32 ₹

F For 25 mm Ø. (3.38 mm min. wall thickness) 1296.00 Rmt. ₹ 77.25 ₹

6 Providing & fixing GI Z-Patti at all floor level of approved design & make to

C.I., S.C.I or PVC Pipe including the cost of cutting holes & making good the

wall etc. complete as directed.

For all dia. Of pipe 1994.00 Rmt. ₹ 267.00 ₹

7 Providing U - type GI clamp for following dia. Of pipe with PVC cover & Nut ₹ -

8 Providing and fixing C.I. D/F Sluice Valve with ISI-14846 & Pressure PN 1.0 ₹ -

casted on body with non-magnetic SS Spindle & with Cap as per Drawing 1-

B of IS-14846 “KIRLOSKAR” Brand on all types of pipes including all types of

Jointing Materials.

A For 150 mm Ø long body 6.00 No. ₹ 7,067.00 ₹

A For 100 mm Ø long body 2.00 No. ₹ 4,314.00 ₹

B For 80 mm Ø long body 93.00 No. ₹ 3,257.00 ₹

C For 65 mm Ø long body 102.00 No. ₹ 2,947.00 ₹

9 Constructing Valve Chambers having inside clear dimension of 0.60 x 0.60 x 32.00 No. ₹ 10,560.00 ₹

0.90 M depth as per given detailed drawing including 100 mm thk. P.C.C.

1:4:8 mix ( 1-Cement : 4 coarse sand : 8 M/c stone aggregate 20MM nominal

size) - 330 mm thick brick masonary walls with RCC precast cover with supply,

fitting, fixing with complete as per specification 10ton size 550/550/90mm with

handles, inside plastering 12 mm thick in Cement Mortar 1:3 (1 Cement :

Coarse sand) finished with neeru finish and making bottom channels in

mm thk. Cement Concrete 1:2:4 mix ( 1-Cement : 2 coarse sand, 4 M/c stone

aggregate 20 MM nominal size) finished smooth with a floating coat of neat

cement incl. providing and fixing 100 mm thk. R.C.C. copping on top of wall

in C.C. 1:1:2 incl. curing, testing, excavation etc. complete as directed.

10 RCC UGT:- ₹ -

Constructing Under Ground Water Tank all RCC work (Concrete Grade M30)

including Steel as per structural drawing, Water tank location & capacity

suggested by Project Architect / Engineer-in-charge, Structural Design by

Structural Engineer and proof checking by RMC / PMC including necessary

excavation & filling work, 15 cm thick base PCC work, bottom & top slab,

pardi with water proofing cement plaster in C.M. 1:2 with smooth finishing,

watering ec. comp. to all inner face of tank & 20 mm thk. sandface cement

plaster consisting base coat of 12 mm thk. in C.M. 1:3 & 8 mm thk. finishing

coat of C:M 1:1 on outer surface of tank, curing etc. with CI frame & cover

fitting of required size & glazed tiles (1st Quality of sizr 12"X18") insides of tank of

required size in Cement and Joints to be filled with white cement comp. etc.

(Note: Before carring out plaster work on RCC, required tipping work should

be carried out as instructed).

Rectangular Sump with water table 900000.00 Ltr. ₹ 10.00 ₹

11 Providing and fixing Water meter ISI-779 mark threaded / flanged brass / CI 24.00 No. ₹ 9,730.00 ₹

body of approved bran including of all type jointing materials for 80 mm dia.

Total of Water Supply ₹

10 - External Drainage

1 Excavation of trench for pipes in soft murrum / clay / sand with all safety 1901.00 Cum. ₹ 96.60 ₹

Provisions (with re-filling of trench) for depth from 0.0 to 1.5 mtr.

2 Excavation of trench for Pipes in Hard Murrum with all safety Provisions (with re- 1488.00 Cum. ₹ 103.50 ₹

filling of trench) for depth from 0.0 to 1.5 mtr.

3 Foundation filling with CC work in proportion of 1:2:4 using 1.5 cm to 2.0 cm 186.00 Cum. ₹ 3,913.20 ₹

aggregate including Raming, Curing etc.

4 Providing & laying P.V.C. Pipes (RIGID) SWR (B-Type) - 6 Kg. ISI marked for 0.00 ₹ -

following DIA. (OUTER) with special as per site condition and required jointing

solution, fittings like elbow, tee, coupler, YT, YT bend etc. including hydraulic

testing as directed by engineer-in-charge.

5 Providing, supplying, laying, jointing and fixing Glazed Stoneware ISI pipe for 0.00 ₹ -

following dia. of pipe with required Specials jointing materials, lighting, all

necessary safety arrangements and necessary testing to be done. (Excluding

excavation, bedding and refilling).

A Stoneware pipe 150mm 1797.00 Rmt. ₹ 399.00 ₹

B Stoneware pipe 200mm 518.00 Rmt. ₹ 609.00 ₹

C Stoneware pipe 250mm 455.00 Rmt. ₹ 963.00 ₹

6 Gully Chamber as per 0.30 x 0.30 size & design upto 0.45 m depth with 300.00 No. ₹ 954.00 ₹

providing and fixing air tight C.I. Frame & Cover including foundation in C.C.

1:3:6, brick masonary in C.M. 1:3, benching, coping in C.C. 1:1:2 & plaster 1:3

inside & outside.

7 Drainage House connection Brick Masonary ROund/Square Inspection

Chamber Type as per Design (0.50 x 0.50) foundation P.C.C. in 1:3:6 with brick

masonary cement mortar 1:4 and plaster cement mortar 1:3 and copping

c.c 1:1:2 with benching c.c 1:2:4 and finishing, curing and fixing of frame &

cover etc complete. (Including Excavation & excluding supply of Precast

No. Particulars Quantity Unit Rate Estimated cost

8.0 Supply, fitting, fixing 600 X 600 mm / 600 mm dia. RCC precast frame & cover 332.00 No. ₹ 1,508.00 ₹

etc. complete as per specification 5 ton.

9.0 Drainage manhole should be done according to design given with ratio are

at the bottom it should be C C 1:3:6 with brick mansonry 1:4 cum plaster 1:3

cm coping 1:1:2 and also benching around it with 1:2:4 should be done with

finishing, curing, manhole frame cover and also with PVC step. (excluding

excavation or suplly of frame cover)

9.1 Type ---A--- : Round : Up to 1.50 m depth * inside dia. 1200 mm ( for drainage 36.00 No. ₹ 8,084.00 ₹

lines from 150 mm to 500 mm dia.) (Menhole type - A up to 1.00 meter depth)

9.2 Extra depth beyond 1.01 mt. but upto 1.50 mt. depth for 'A' type manhole. 8.00 Rmt. ₹ 7,461.00 ₹

9.3 Type B manhole for 1.50 mt. dia. x 4.00 mt. depth - for 1.50 mt. depth 15.00 No. ₹ 16,003.00 ₹

9.4 Extra depth beyond 1.51 mt. but upto 4.00 mt. depth for 'B' type manhole. 2.25 Rmt. ₹ 12,227.00 ₹

10.0 Supply, fitting, fixing 600 mm dia. RCC precast frame & cover for sewer 51.00 No. ₹ 1,787.00 ₹

manhole etc. complete as per specification 10 ton.

Total of External Drainage ₹

11 - Rain Water Harvesting

1 Excavation of Foundation in Soft Murrum, Hard Murrum, Soil or Sand from 0.00 1308.00 Cum. ₹ 137.00 ₹

mtr. To 1.50 mtr. Depth including dewatering with lifting and laying in RMC

limit as instructed

2 Excavation of Foundation in Soft Murrum,Hard Murrum, Soil or Sand from 1.51 64.00 Cum. ₹ 151.50 ₹

mtr. to 3.0 mtr depth including dewatering with lifting and laying in RMC limit

3 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 104.00 Cum. ₹ 534.00 ₹

/Gann from 1.50 mtr. to 3.00 mtr depth including dewatering with lifting and

laying in RMC limit as instructed

4 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 104.00 Cum. ₹ 586.50 ₹

/Gann from 3.01 mtr. to 4.50 mtr depth including dewatering with lifting and

laying in RMC limit as instructed

5 Foundation filling with CC work in proportion of 1:3:6 using 1.5 cm to 2.0 cm 8.00 Cum. ₹ 3,965.00 ₹

aggregate including Raming, Curing etc.

6 Brick Masonry work in Cement:Mortar 1:6 104.00 Cum. ₹ 5,761.00 ₹

7 Providing & laying CC work M-25 for Beam using aggregate of size 10-20 mm, 8.00 Cum. ₹ 6,250.00 ₹

centring, curing, finishing etc. complete (without reinforcement)

8 Providing & laying CC work M25 for RCC slab using aggregate of size 10-20 12.00 Cum. ₹ 6,150.00 ₹

mm, centring, curing, finishing etc. complete (without reinforcement)

9 Supplying, Cutting, Beding, Binding and Hooking and binding with wire for 3200.00 Kg. ₹ 65.00 ₹

RCC work Tor steel TMT round bar including all cost

10 Cement Plaster 12 mm thick using Cement:Mortar in proportion 1:3 with Niru 360.00 Sqm. ₹ 223.00 ₹

Finishing curing, etc. complete (Note: Before carringout Plaster work on RCC,

required tipping work should be carried out as instructed)

11 Providing and fixing Bore 150mm dia. Including percolated casing pipe for 120.00 Rmt. ₹ 250.00 ₹

12 Supply & Laying of Field Metal (4-10 cm) Size 40.00 Cum. ₹ 558.00 ₹

13 Supply, Transportation and spreading of filter media (Gravel) in necessary 20.00 Cum. ₹ 1,052.00 ₹

layer with required labour etc. complete.

14 Supply & Laying of Coarse Sand 20.00 Cum. ₹ 1,015.00 ₹

15 Providing P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 160 MM DIA. (OUTER) with 1542.00 Rmt. ₹ 541.00 ₹

special as per site condition with required jointing solution including hydraulic

testing as approved & directed by engineer-in-charge.

16 Providing P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 110 MM DIA. (OUTER) with 955.00 Rmt. ₹ 262.00 ₹

special as per site condition with required jointing solution including hydraulic

testing as approved & directed by engineer-in-charge.

17 Drainage house connection should construction either ( square / round )

withg brick masonry type ( 0.50m* 0.50m) in which the bottom should be of

CC 1:3:6 with brick masonry 1:4 cum plaster 1:3 cm coping CC 1:1:2 and also

benching around it with 1:2:4 should be done with finishing,curing and fixing

framecover. (excluding excavation or suplly of frame cover) of following size &

A up to 0.45 meter depth 180.00 No. ₹ 2,124.00 ₹

B More than 0.45 meter and up to 0.60 meter depth 44.00 No. ₹ 2,742.00 ₹

C More than 0.60 meter and up to 0.75 meter depth 38.00 No. ₹ 3,374.00 ₹

D More than 0.75 meter and up to 0.90 meter depth 26.00 No. ₹ 3,793.00 ₹

18 Supply, fitting, fixing 600mm dia. RCC precast frame & cover Square/circular 296.00 No. ₹ 1,508.00 ₹

etc. complete as per specification 5 ton.

Total of Rain Water Harvesting ₹

12 - Landscaping & Children Play Area

1 Excavation of Foundation in Soft Murrum Soil or Sand from 0.00 mtr. To 1.50 3020.00 Cum. ₹ 133.00 ₹

mtr. Depth including up to all lifting and laying in Lead area as instructed

2 Removel of Excavated Stuff and Laying with in RMC Limit as directed by 3020.00 Cum. ₹ 171.00 ₹

Engineer in charge

3 Supply of Laying approved Quality River Soil & Black Soil for Garden 2380.00 Cum. ₹ 176.00 ₹

4 Laying out Lawn: After excavating soil upto 30 cm depth, preparing soil for 3929.00 Sqm. ₹ 100.00 ₹

planting by supplying and mixing pepairing soil for planting by supplying and

mixing Farm Yard Manure at the rate of 5 Cum. per 100 Sqm. area, providing

and planting suckers of pure dharo (doob) grass roughly at 10 cm x 10 cm

distance and maintaining till well established etc complete (about 45 days).

5 Providing, supplying and laying of Bhogavo Sand. 650.25 Cum. ₹ 813.00 ₹

6 Plantation of tree in soil incl digging 45 x 45 x 45 cm size pits Preparing 260.00 No. ₹ 300.00 ₹

Providing and mixing organic fertilser Watering Planting and filing the pits as

per direction including etc.complete

7 Providing tree plants having minimum 1.00 mt height and healthy growth of 260.00 No. ₹ 500.00 ₹

various kinds as like Pletfrom gulmahore Kananj Ambla, Ranitree,

Sapataparni, Cherry, Cryjeliya, Spethodia, Paras Pipala, Gromalo, Nem,

Borsalli, Kadam, Buch, Chompo,Asopalav and as suggested.

No. Particulars Quantity Unit Rate Estimated cost

8 Providing and laying shrubs and ground covers: Excavating pits of size 0.30m 90.00 Sqm. ₹ 800.00 ₹

x 0.30m x 0.30m for shrubs and 0.15m x 0.15m x 0.15m for ground covers, filling

with supplied garden soil mixture of farmyard manure, red earth and river

sand in appropriate ratios, Procuring and planting specified nursery grown

shrubs of minimum height 0.3m -0.45m, the spacing location and other details

as per the drawings and specifications. Rate to include for all plant

cost,transport, pit and soil preparations, installation, labour,disposing the

surplus earth etc., complete as directed by Engineer-in-charge. (Approx.

average cost of shrub only is Rs. 25.00) (Approx. Name of the shrubs are red

ixora, spider lily, yellow karen, pink karen, orange caselpenea pulcherim,

yellow caselpenea pulcherima, ticoma gaudi chaudi, lantana, kadvi

mehndi, ficus panda, black ficus, hawaiin jasud, waddelia, kadak bijli, ixora

duffy, veriagated verbina, asparagus, lal mehndi, bauganvelia, chandani

dwarf, etc. No. of shrubs is 8 to 9 per sq.mt.)

9.1 Maintenance of Planted tree up to 6 (six) months incl. watering digging pits 260.00 No. ₹ 500.00 ₹

rimming applying fertilizer, insecticide, Pesticide and Pesticides and replacing

plants if necessary etc. complete for raising of plants weeding or soil working

also incl. maintaining water supply lines and drip lines of plantation (Water

and Electricity supply by Dept.)

9.2 Maintenance of shrubs and ground covers up to 6 (six) months incl. watering 90.00 Sqm. ₹ 200.00 ₹

digging pits rimming applying fertilizer, insecticide, Pesticide and Pesticides

and replacing plants if necessary etc. complete for raising of plants weeding

or soil working also incl. maintaining water supply lines and drip lines of

plantation (Water and Electricity supply by Dept.)

10 Providing, supplying & fixing 2 x 2 swing in garden with clear height 3m x 2.45 16.00 No. ₹ 35,260.00 ₹

m use 60mm B CLASS G.I. pipe with wall fastener & foundation bottom plate,

use 40mm B CLASS G.I. support pipe, with use 6mm M.S. chain with 2.13 m

length, with bearing hook with 53x30 cm FRP sheet.

11 Providing and supplying roller slide with height 1.30 x 0.58 mt. with railing 8.00 No. ₹ 17,224.00 ₹

height 0.41 m, use 40mm B CLASS G.I. pipe with bottom foundation plate, use

32mm B CLASS G.I. railing & support pipe 25mm B CLASS G.I. step pipe, with

woodan platform 0.58 x0.19 m. with 100 x25 mm B CLASS G.I. pipe & 32 mm B

CLASS G.I. support pipe, with 3mm thick & 0.42 m long pvc plastic roller with

guider & brighter barr, with clear seating size 0.45 inside.

12 Providing and supplying waves slide,with height 1.30 x 0.58 mt., with railing 4.00 No. ₹ 17,224.00 ₹

height 0.41 m, use 40mm B CLASS G.I pipe with bottom foundation plate ,use

32mm B CLASS G.I. railing & support pipe 25mm B CLASS G.I. step pipe, with

wooden platform 0.58 x0.19 m, with 4mm thick 1.70m long with inside seating

width 0.36 m & outside width 0.51.

13 Providing, supplying and fixing precast bench with stand as per approved 142.00 No. ₹ 2,500.00 ₹

deisgn, shape, size and quality.

Total of Landscaping & Children Play Area ₹

13 - Compound Wall

1 Excavation for foundation upto 1.5M depth including sorting out and ₹ -

stacking of useful materials and disposing of the excavated stuff upto all

lead & lift for foundation.

A) In loose or soft soil 139.00 Cum. ₹ 133.00 ₹

B) In Dense or Hard soil 787.64 Cum. ₹ 141.00 ₹

2 Foundation filling with CC work in proportion of 1:3:6 using 1.5 cm to 2.0 cm 99.89 Cum. ₹ 3,965.00 ₹

aggregate including Raming, Curing etc.

3 Brick work using common burnt clay building bricks having crushing strength 0.00 ₹ -

not less than 35 kg./Sq.Cm. for all floor level in Cement Mortar 1:6 (1- Cement :

6 -fine sand)(Below & Above Plinth Beam)(Super Strcture)

A) In foundation and plinth 127.05 Cum. ₹ 5,761.00 ₹

B) In Super structure 203.15 Cum. ₹ 5,761.00 ₹

4 Brick Masonry Partition Wall in Cement:Mortar 1:4 (3.5 to 4.5 inch thick) 686.30 Sqm. ₹ 564.00 ₹

5.1 Providing and laying C.C. work in M-250 using aggregate of size 10-20 101.48 Cum. ₹ 5,620.00 ₹

mm,centring, curing, finishing etc. complete for : (A) foundation, footing, base

of columns and mass concrete (without reinforcement)

5.2 Providing & laying CC work M-250 for Column using aggregate of size 10-20 103.36 Cum. ₹ 6,550.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement)

5.3 Providing and laying C.C. work in M-250 using aggregate of size 10-20 163.35 Cum. ₹ 6,250.00 ₹

mm,centring, curing, finishing etc. complete for : D) Plinth Beam (without

6 Providing and laying CC work M-200 for RCC coping on top of wall using 36.30 Cum. ₹ 5,400.00 ₹

aggregate of size 10-20 mm, centring, curing, finishing etc. complete.

7 Filling of Plinth with using excavated usefull material partly and remaining 559.02 Cum. ₹ 185.00 ₹

murrum to be brought from out side in layer of 0.23 m thick including murrum

and sprinkling of water, compaction etc. complete.

8 Supplying, Cutting, Beding, Binding and Hooking and binding with wire for 49843.00 Kg. ₹ 65.00 ₹

RCC work Tor steel TMT round bar including all cost

9 20mm thick Sand Face Cement Plaster Work in which 1st plaster in proportion 5251.00 Sqm. ₹ 263.00 ₹

of 1:3 and 2nd plaster in proportion of 1:2 using Cement:Mortar mixed with

fibre, spong finishing etc. complete (Note: Before carringout Plaster work on

RCC, required tipping work should be carried out as instructed)for all Floor

10 Apex Color work with water proofing cement paint of on wall surfaces (Two 5251.00 Sqm. ₹ 115.00 ₹

coats or as per instruction of site Incharge) to give an approved brand and

manufacture and of required shape even shade after thoroughly brushing

the surface to remove all dirt and remains of loose powder materials. (FOR

11 Plaster with grooving and Patta of size 5 cm to 10 cm width and 12 to 20 mm 1210.00 Rmt. ₹ 35.00 ₹

thick using in proportion of 1:3 (FOR ALL FLOOR)

12 Providing and fixing 150 mm wide, approved quality chicken wire mesh at 90.00 Sqm. ₹ 102.00 ₹

junction of brick/AAC Block work and RCC work or two dissimilar surfaces, at

all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all complete as directed.

(FOR ALL FLOOR)

Total of Compound Wall ₹

No. Particulars Quantity Unit Rate Estimated cost

14 - Entary Gate & Security Cabin

1 Excavation for foundation upto 1.5M depth including sorting out and ₹ -

stacking of useful materials and disposing of the excavated stuff upto all

lead & lift for foundation.

A) In loose or soft soil 28.00 Cum. ₹ 133.00 ₹

B) In Dense or Hard soil 160.00 Cum. ₹ 141.00 ₹

2 Excavation for foundation for depth from 1.5M to 3.0M including sorting out 0.00 ₹ -

and stacking of useful materials and disposing of the excavated stuff upto all

lead & lift for foundation.

A) In hard murrum 28.00 Cum. ₹ 159.00 ₹

3 Removel of Excavated Stuff and Laying with in RMC Limit as directed by 84.97 Cu.Mt. ₹ 171.00 ₹

Engineer in charge

4 Foundation filling with CC work in proportion of 1:2:4 using 1.5 cm to 2.0 cm 8.14 Cu.Mt. ₹ 4,626.00 ₹

aggregate including Raming, Curing etc.

5 Foundation filling with CC work in proportion of 1:3:6 using 1.5 cm to 2.0 cm 21.17 Cum. ₹ 3,965.00 ₹

aggregate including Raming, Curing etc.

6.1 Providing and laying CC work M-250 for RCC footing using aggregate of size 31.10 Cum. ₹ 5,620.00 ₹

10-20 mm, centring, curing, finishing etc. complete.

6.2 Providing and laying CC work M-250 for RCC column using aggregate of size 41.68 Cum. ₹ 6,550.00 ₹

10-20 mm, centring, curing, finishing etc. complete.

6.3 Providing and laying CC work M-250 for RCC beam using aggregate of size 47.71 Cum. ₹ 6,250.00 ₹

10-20 mm, centring, curing, finishing etc. complete.

6.4 Providing and laying CC work M-250 for RCC slab using aggregate of size 10- 8.60 Cum. ₹ 6,150.00 ₹

20 mm, centring, curing, finishing etc. complete.

6.5 Providing & laying CC work M-250 for Lintel using aggregate of size 10-20 mm, 1.74 Cum. ₹ 6,000.00 ₹

centring, curing, finishing etc. complete (without reinforcement)

6.6 Providing & laying CC work M-250 for Chhaja using aggregate of size 10-20 0.73 Cum. ₹ 5,950.00 ₹

mm, centring, curing, finishing etc. complete (without reinforcement)

7 Filling of Plinth with using excavated usefull material partly and remaining 132.00 Cum. ₹ 185.00 ₹

murrum to be brought from out side in layer of 0.23 m thick including murrum

and sprinkling of water, compaction etc. complete

8 Filling of Plinth in layers of 0.23 m thick including murrum and sprinkling of 32.00 Cu.Mt. ₹ 347.00 ₹

water, compaction etc. complete

9 Supplying, Cutting, Beding, Binding and Hooking and binding with wire for 17859.72 Kg. ₹ 65.00 ₹

RCC work Tor steel TMT round bar including all cost

10 Brick work using common burnt clay building bricks having crushing strength 70.25 Cum. ₹ 5,761.00 ₹

not less than 35 kg./Sq.Cm. for all floor level in Cement Mortar 1:6 (1- Cement :

6 -fine sand)(Below & Above Plinth Beam)(Super Strcture)

11 Brick Masonry Partition Wall in Cement:Mortar 1:4 (3.5 to 4.5 inch thick) 8.69 Sqm. ₹ 564.00 ₹

12 Cement Plaster 12 mm thick using Cement:Mortar in proportion 1:3 with Niru 81.52 Sqm. ₹ 207.00 ₹

Finishing curing, etc. complete.

13 Cement Plaster Work 12mm average thick using Cement: Mortar in 148.00 Sqm. ₹ 207.00 ₹

proportion of 1:3 rough cast (without Niru Finishing)(Ceiling & Wall Plaster)

14 Applying two coats of Aprroved Made Birla or JK lapy (putty) three coats & 148.00 Sqm. ₹ 82.00 ₹

three coats of primer of approved brand and manufacture on new wall

surface with 2 years warrantee (to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.)(FOR ALL FLOOR)

15 Plastic Imulsion Paint (Two coats) (Asian Paint, ICI, Dulux, Nerolac, Berger etc. 148.00 Sqm. ₹ 145.00 ₹

of approved type) (with Prime Coat) .

16 20mm thick Sand Face Cement Plaster Work in which 1 paster in proportion 492.00 Sqm. ₹ 263.00 ₹

of 1:3 and 2nd plaster in the proportion of 1:2 using Cement:Mortar with

spong finishing etc. complete (Note: Before carring out Plaster work on RCC,

required tipping work should be carried out as instructed).

17 Apex Color work with water proofing cement paint of on wall surfaces (Two 492.00 Sqm. ₹ 115.00 ₹

coats or as per instruction of site Incharge) to give an approved brand and

manufacture and of required shape even shade after thoroughly brushing

the surface to remove all dirt and remains of loose powder materials. (FOR

18 Providing and fixing 35 mm thick good quality flush door shutter with 01 mm 8.00 Sqm. ₹ 4,487.00 ₹

laminated sheet on both side and as per design SS and aluminium fixtures

and fastening as per satisfaction of Engineer in charge complete.

19 Providing & Fixing FRP Door. 8.00 Sqm. ₹ 4,200.00 ₹

20 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of 20.04 Rmt. ₹ 679.85 ₹

crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive

shutter of 30 mm thickness. The laminate shall be moulded with fire resistant

grade unsaturated polyester resin and chopped mat. Door frame laminate

shall be 2mm thick and shall be filled with suitable wooden block in all the

three legs. The frame shall be covered with fiber glass from all sides. M.S. stay

shall be provided at the bottom to steady the frame.

21 Supply & fixing of Vitrified flooring (1st quality) with cement grouting in joints 28.00 Sq.Mt. ₹ 650.00 ₹

etc. complete. (FOR ALL FLOOR)

22 Supply & fixing of Vitrified for skirting work (1st quality) width up to 10 cm 36.00 Rmt. ₹ 96.00 ₹

including with cement grouting in joints etc. complete (FOR ALL FLOOR)

23 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and 56.00 Sq.Mt. ₹ 1,028.11 ₹

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry.

24 Aluminium sliding window work etc. (A) Aluminium powder coated three 8.00 Sq.Mt. ₹ 2,752.00 ₹

track windows width with 2 shutter aluminium sliding window as per site

situation. as per instructed by engineer incharge and As per specifications.

1,(For 2 Sliding Shutters) Providing and fixing Window having extruded

Alluminium Aluminium powder coated section horizontal and vertical Three

track member size 92mm x 31.75mm x 1.00mm (of Section no:8688,@ Wt.0.89

Kg/mt), With 2 sliding shutter of horizontal member size 40mm x 18mm x

mm (of section no.8949 @ Wt. of 0.456 kg/Rmt ) vertical member of size 40mm

x 18mm x 1.00 mm (of section no.8949 @ Wt. of 0.456 kg/Rmt section 8948 @

Wt.0.457 kg/rmt.) with 4 mm thick transperent bronze colour tinted float glass

with powder coated alluminium fittings and fixtures with locking arrangement

to frame and fixtures and transparent silicon sealant fixing to outside frame as

per Instruction.

No. Particulars Quantity Unit Rate Estimated cost

25 Providing and fixing standared extruded of alluminium section of size 63mm x 1.44 Sq.Mt. ₹ 1,163.92 ₹

38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour

Powder Coated alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation.

26 Iron work as per drawing and instruction including all (FOR ALL FLOOR) 6000.00 Kg. ₹ 109.00 ₹

27 Grill work for doors - windows etc. as per design on site with fitting & fixing. 88.00 Kg. ₹ 109.00 ₹

(FOR ALL FLOOR)

28 Enemal painting on door/window, iron door, iron grill or woodwork two coat 88.00 Sq.Mt. ₹ 125.00 ₹

and including preparing the surface by throughly cleaning oil, grease, dirt

and other foreign matter, sand papering and knotting. (FOR ALL FLOOR)

29 Providing & laying Cement concrete flooring (IPS) 50mm thick in proportion 80.00 Sqm. ₹ 338.00 ₹

1:2:4 with a floating coat of neat cement,finishing,curing etc.

30 Supply & Fixing of Broken Glazed (China Mosaic) tiles size 5-6 mm thick of 28.00 Sqm. ₹ 306.00 ₹

different size and shade (approved crazy patern) in Cement:Mortar 1:2 and

joint filling with White Cement / Coloured Cement with water proofing

component including Ramping, Watering, Curing etc. complete (FOR ALL

31 Cement Plaster 12 mm thick using Cement:Mortar in proportion 1:3 with Niru 68.00 Sqm. ₹ 207.00 ₹

Finishing curing, etc. complete.

32 Cement, lodhiya work with neat cement slurry finishing (FOR ALL FLOOR) 76.00 Rmt. ₹ 26.00 ₹

33 Providing and filling cinder of Light weight material for filling sunk portion in 16.00 Cum. ₹ 476.00 ₹

Toilet etc as directed.

34 Water Proofing Treatment on Terrace and Wall sides with smooth finishing 100.00 Sqm. ₹ 121.00 ₹

including material-labour etc. complete.

Total of Entary Gate & Security Cabin ₹

15 - Cattle Trap

1 Excavation for foundation upto 1.5M depth including sorting out and ₹ -

stacking of useful materials and disposing of the excavated stuff upto all

lead & lift for foundation.

A) In loose or soft soil 8.00 Cum. ₹ 133.00 ₹

B) In Dense or Hard soil 40.00 Cum. ₹ 141.00 ₹

2 Foundation filling with CC work in proportion of 1:3:6 using 1.5 cm to 2.0 cm 5.40 Cum. ₹ 3,965.00 ₹

aggregate including Raming, Curing etc.

3 Providing and laying in position Ready Mixed Sqm.50 grade concrete without

Fly Ash for reinforced cement concrete work, using cement content as per

approved design mix manufactured in fully automatic batching plant and

transported to site of work in transist mixer for a lead up to 10 kms having

continous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work including pumping of R.M.C. from

transist mixer to site of laying, including the cost of centering, shuttering,

admixtures in recommended proportions as per IS: 9103 to accelerate /

retard setting of concrete, improve workability without impairing strength and

durability as per direction of the EIC finishing etc. completed but excluding

the cost reinforcement. (Min. cement level as per latest IS: 456 shall be

maintained) (Cement level 450 Kg.)

3.1 Providing and laying CC work M-25 for RCC footing using aggregate of size 10- 8.10 Cum. ₹ 5,620.00 ₹

20 mm, centring, curing, finishing etc. complete.

3.2 Providing and laying CC work M-25 for RCC wall using aggregate of size 10-20 11.16 Cum. ₹ 7,102.00 ₹

mm, centring, curing, finishing etc. complete.

3.3 Providing and laying CC work M-25 for RCC beam using aggregate of size 10- 0.86 Cum. ₹ 6,250.00 ₹

20 mm, centring, curing, finishing etc. complete.

4 Filling of Plinth with using excavated usefull material partly and remaining 56.00 Cum. ₹ 185.00 ₹

murrum to be brought from out side in layer of 0.23 m thick including murrum

and sprinkling of water, compaction etc. complete

5 Supplying, Cutting, Beding, Binding and Hooking and binding with wire for 1632.00 Kg. ₹ 65.00 ₹

RCC work Tor steel TMT round bar including all cost

6 Cement Plaster 12 mm thick using Cement:Mortar in proportion 1:3 with Niru 104.00 Sqm. ₹ 207.00 ₹

Finishing curing, etc. complete.

7 Cement, lodhiya work with neat cement slurry finishing (FOR ALL FLOOR) 104.00 Rmt. ₹ 26.00 ₹

8 Providing & laying Cement concrete flooring (IPS) 50mm thick in proportion M- 56.00 Sqm. ₹ 338.00 ₹

15 with a floating coat of neat cement,finishing,curing etc.

9 Providing & fixing 65 mm dia. of galvanised mild steel tube of medium grade 344.00 Rmt. ₹ 468.00 ₹

for trap on M.S. plate & M.S. Cleat as per drawing & as directed by an

Engineer-in-charge.

10 Providing & fixing 10 mm thk. M.S. Plate & cleat including welding & fixing as 2.75 Qtl. ₹ 5,012.00 ₹

per drawing & as directed by an Engineer-in-charge.

Total of Cattle Trap ₹

16 - Commercial Building - Civil-Plumbing

1 Excavation of Foundation in Soft Murrum,Hard Murrum, Soil or Sand from 0.00 329.00 Cu.Mt. ₹ 137.00 ₹

mtr. To 1.50 mtr. Depth including lifting and laying in 90 mtr. Lead area as

2 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 165.00 Cu.Mt. ₹ 502.50 ₹

/Gann from 0.0 mtr. to 1.50 mtr depth including lifting and laying in 90 mtr.

lead area as instructed.

3 Excavation of Foundation in Soft Rock,Hard rock with Breaker /Blasting 493.00 Cu.Mt. ₹ 534.00 ₹

/Gann from 1.50 mtr. to 3.00 mtr depth including lifting and laying in 90 mtr.

lead area as instructed

4 Removel of Excavated Stuff and Laying with in RMC Limit as directed by 592.00 Cu.Mt. ₹ 171.00 ₹

Engineer in charge

5 Foundation filling with CC work in proportion of 1:2:4 using 1.5 cm to 2.0 cm 116.00 Cu.Mt. ₹ 4,626.00 ₹

aggregate including Raming, Curing etc.

6 Providing and laying C.C. work in M-300 using aggregate of size 10-20 184.00 Cu.Mt. ₹ 5,830.00 ₹

mm,centring, curing, finishing etc. complete for : (A) foundation, footing, base

of columns and mass concrete (without reinforcement)

7 Providing & laying CC work M-300 for Column using aggregate of size 10-20 87.00 Cu.Mt. ₹ 6,750.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

No. Particulars Quantity Unit Rate Estimated cost

8 CC work M-25 for Wall Partition, Parsdment, railling etc.using aggregateof size 41.00 Cu.Mt. ₹ 7,150.00 ₹

10-20 mm, centring, curing, finishing etc. complete (without reinforcement)

(FOR ALL FLOOR)

9 Providing and laying C.C. work in M-250 using aggregate of size 10-20 54.00 Cu.Mt. ₹ 6,250.00 ₹

mm,centring, curing, finishing etc. complete for : D) Plinth Beam (without

reinforcement) (FOR ALL FLOOR)

10 Brick work using common burnt clay building bricks having crushing strength 105.00 Cu.Mt. ₹ 5,761.00 ₹

not less than 35 kg./Sq.Cm. for all floor level in Cement Mortar 1:6 (1- Cement :

6 -fine sand) (FOR ALL FLOOR)

11 Filling of Plinth with using excavated usefull material partly and remaining 269.00 Cu.Mt. ₹ 185.00 ₹

murrum to be brought from out side in layer of 0.23 m thick including murrum

and sprinkling of water, compaction etc. complete

12 Filling of Plinth in layers of 0.23 m thick including murrum and sprinkling of 929.00 Cu.Mt. ₹ 347.00 ₹

water, compaction etc. complete

13 Carring out plinth treatment to post construction / existing structure by 648.00 Sq.Mt. ₹ 123.12 ₹

spraying chemical solution for termite control treatment including labour and

material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles

20 EC. As Per 6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion appication at the rate

of 5 Litre chemical / Sqm of surface is recommended as per I.S

14 Providing & laying CC work M-250 for Beam using aggregate of size 10-20 222.00 Cu.Mt. ₹ 6,250.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

15 Providing & laying CC work M-250 for RCC slab using aggregate of size 10-20 302.00 Cu.Mt. ₹ 6,150.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

16 Providing & laying CC work M-250 for Lintel using aggregate of size 10-20 mm, 4.00 Cu.Mt. ₹ 6,000.00 ₹

centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

17 Providing & laying CC work M-250 for Chhaja using aggregate of size 10-20 23.00 Cu.Mt. ₹ 5,950.00 ₹

mm, centring, curing, finishing etc. complete (without reinforcement) (FOR

18 Providing & laying CC work M-250 for Stair Case using aggregate of size 10-20 26.00 Cu.Mt. ₹ 6,300.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

19 Providing & laying CC work M-250 for Copping using aggregate of size 10-20 35.00 Cu.Mt. ₹ 5,550.00 ₹

mm,centring, curing, finishing etc. complete (without reinforcement) (FOR ALL

20 CC work M20 for RCC Grade slab(Bottom slab) using aggregate of size 10-20 80.00 Cu.Mt. ₹ 5,000.00 ₹

mm, centring, curing, finishing etc. complete (without reinforcement)

21 Supplying, Cutting, Beding, Binding and Hooking and binding with wire for 127332.10 Kg. ₹ 65.00 ₹

RCC work Tor steel TMT round bar including all cost

22 Providing & laying Cement concrete flooring (IPS) 50mm thick in proportion 733.00 Sq.Mt. ₹ 338.00 ₹

1:2:4 with a floating coat of neat cement,finishing,curing etc.

23 Supply & Fixing of Broken Glazed (China Mosaic) tiles size 5-6 mm thick of 670.00 Sq.Mt. ₹ 306.00 ₹

different size and shade (approved crazy patern) in Cement:Mortar 1:2 and

joint filling with White Cement / Coloured Cement with water proofing

component including Ramping, Watering, Curing etc. complete (FOR ALL

24 Masonary work using Aerated Light Weight concrete block having crushing 513.00 Cu.Mt. ₹ 3,982.00 ₹

strength not less than 35kg/sq.cm. and 0.20wmk thermal conductivity for

super structure above plinth level to ALL FLOOR in chemical mortar complete

as per technical Specification. (FOR ALL FLOOR)

25 Providing and fixing 150 mm wide, approved quality chicken wire mesh at 860.00 Sq.Mt. ₹ 102.00 ₹

junction of brick/AAC Block work and RCC work or two dissimilar surfaces, at

all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all complete as directed.

(FOR ALL FLOOR)

26 Cement Plaster Work 12 mm average thick using Cement:Mortar in 3508.00 Sq.Mt. ₹ 207.00 ₹

proportion of 1:3 rough cast (without Niru Finishing) etc. complete (Note:

Before carringout Plaster work on RCC, required tipping work should be

carried out as instructed)(FOR ALL FLOOR)

27 Providing and Applying 3 Coat Ready mix Curing less Chemical Mortar 2173.00 Sq.Mt. ₹ 219.00 ₹

Plaster 5 to 7 mm thick average with smooth finishing with line & level for

Ceiling with with 2 year warranty, specification and direction by Engineer

Incharge, all materials, tools,plant and labour etc. complete (Note: Before

carringout Plaster work on RCC, required tipping ,chiselling & cleaning work

should be carried out as instructed)(FOR ALL FLOOR)

28 Applying Aprroved Made Birla or JK lapy (putty) three coats & three coats of 5681.00 Sq.Mt. ₹ 82.00 ₹

primer of approved brand and manufacture on new wall surface with

years warrantee (to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth) (FOR ALL FLOOR)

29 20mm thick Sand Face Cement Plaster Work in which 1st plaster in proportion 2224.00 Sq.Mt. ₹ 263.00 ₹

of 1:3 and 2nd plaster in proportion of 1:2 using Cement:Mortar mixed with

fibre, spong finishing etc. complete (Note: Before carringout Plaster work on

RCC, required tipping work should be carried out as instructed)for all Floor

30 Plaster with grooving and Patta of size 5 cm to 10 cm width and 12 to 20 mm 447.00 Rmt. ₹ 35.00 ₹

thick using in proportion of 1:3 (FOR ALL FLOOR)

31 Water Proof Cement Plaster 20 mm thick using Water Proofing Compound 191.00 Sq.Mt. ₹ 234.00 ₹

and in the ratio of 1:3 with necessary finishing (Note: Before carringout Plaster

work on RCC, required tipping work should be carried out as instructed)(FOR

32 Supply & fixing of Vitrified flooring (1st quality) with cement grouting in joints 1608.00 Sq.Mt. ₹ 650.00 ₹

etc. complete. (FOR ALL FLOOR)

33 Supply & fixing of Vitrified for skirting work (1st quality) width up to 10 cm 946.00 Rmt. ₹ 96.00 ₹

including with cement grouting in joints etc. complete (FOR ALL FLOOR)

No. Particulars Quantity Unit Rate Estimated cost

34 Providing and laying Ceramic tiles 6mm thick in flooring, skirting, risers of steps 640.00 Sq.Mt. ₹ 1,028.11 ₹

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry.

35 Supply & Fixing of Polished Kota Stone steps and risers work of length 0.90 to 576.00 Rmt. ₹ 442.00 ₹

2.00 mtr and thickness 20-25 mm to be fixed in Cement:Mortar 1:2 and

Cement slury and as instructed (FOR ALL FLOOR)

36 Supply, Fixing & Polishing of Kota Stone work thickness 20-25 mm to be fixed in 143.00 Sq.Mt. ₹ 913.00 ₹

cement:Mortar 1:2 and liquid Cement and as instructed (ALL FLOORS)

37 Providing and fixing sandwiched type Green Marble as Kitchen platform 4.00 Sq.Mt. ₹ 2,583.00 ₹

etc. 25mm thick kotah stone one side polished for Platform bottom with

20mm thick bedding in CM 1:4, 25mm thick Green Marble one side polished

for kitchen platform Top. Two piece double side polish kota for Partition and

One for side face or end of Kitchen Platform with Green Marble side vertical

piece and 75 mm wide Green Marble patti for platform top facia.The joint

shall be filled with white cement . The cutouts for Kitchen sink if required shall

be provided as per drawing. The stone shall be of one shade only , finished

sizes shall be measured & paid for. ( For all floors )

38 Apex Color work with water proofing cement paint of on wall surfaces (Two 2224.00 Sq.Mt. ₹ 115.00 ₹

coats or as per instruction of site Incharge) to give an approved brand and

manufacture and of required shape even shade after thoroughly brushing

the surface to remove all dirt and remains of loose powder materials. (FOR

39 Cement, lodhiya work with neat cement slurry finishing (FOR ALL FLOOR) 126.00 Rmt. ₹ 26.00 ₹

40 Providing and fixing 30 mm thick good quality flush door shutter with 01 mm 21.00 Sq.Mt. ₹ 4,437.00 ₹

laminated sheet on both side and necessary SS and aluminium fixtures and

fastening as per satisfaction of Engineer in charge complete.(FOR ALL

41 Providing & fixing FRP door.(FOR ALL FLOOR) 40.00 Sq.Mt. ₹ 4,200.00 ₹

42 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of 91.00 Rmt. ₹ 679.85 ₹

crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive

shutter of 30 mm thickness. The laminate shall be moulded with fire resistant

grade unsaturated polyester resin and chopped mat. Door frame laminate

shall be 2mm thick and shall be filled with suitable wooden block in all the

three legs. The frame shall be covered with fiber glass from all sides. M.S. stay

shall be provided at the bottom to steady the frame.

43 RCC Precast frame for all type of wall thickness as directed by Engineer-in- 30.00 Sq.Mt. ₹ 477.00 ₹

Charge. (For All Floor)

44 Providing and Fixing solid PVC door with frame (Choukhat) of size 50x47 mm 14.00 Sq.Mt. ₹ 2,500.00 ₹

of 5mm sheet and 30mm thick solid panel PVC door shutter. Rate inclusive of

providing and fixing necessary Aluminum fixture and fastening as per

specification and as per instruction of site Engg. In charge. (FOR ALL FLOOR)

45 Aluminium sliding window work etc. (A) Aluminium powder coated three 78.00 Sq.Mt. ₹ 2,752.00 ₹

track windows width with 2 shutter aluminium sliding window as per site

situation. as per instructed by engineer incharge and As per specifications.

1,(For 2 Sliding Shutters) Providing and fixing Window having extruded

Alluminium Aluminium powder coated section horizontal and vertical Three

track member size 92mm x 31.75mm x 1.00mm (of Section no:8688,@ Wt.0.89

Kg/mt), With 2 sliding shutter of horizontal member size 40mm x 18mm x

mm (of section no.8949 @ Wt. of 0.456 kg/Rmt ) vertical member of size 40mm

x 18mm x 1.00 mm (of section no.8949 @ Wt. of 0.456 kg/Rmt section 8948 @

Wt.0.457 kg/rmt.) with 4 mm thick transperent bronze colour tinted float glass

with powder coated alluminium fittings and fixtures with locking arrangement

to frame and fixtures and transparent silicon sealant fixing to outside frame as

per Instruction.

46 Providing & fixing approved quality & designed rolling shutters with necessary 244.00 Sq.Mt. ₹ 2,069.00 ₹

top cover, fittings, single coat red lead, double coat silver or oil paint. (FOR

47 Iron work as per drawing and instruction including all (FOR ALL FLOOR) 1284.00 Kg. ₹ 109.00 ₹

48 Grill work for doors - windows etc. as per design on site with fitting & fixing. 1716.00 Kg. ₹ 109.00 ₹

(FOR ALL FLOOR)

49 Enemal painting on door/window, iron door, iron grill or woodwork two coat 460.00 Sq.Mt. ₹ 125.00 ₹

and including preparing the surface by throughly cleaning oil, grease, dirt

and other foreign matter, sand papering and knotting. (FOR ALL FLOOR)

50 Numbering on Building / Quarters (Painting work) as directed 30.00 Character ₹ 11.00 ₹

51 Supply & Fixing of Granite with required carving and fixing it with cement at 1.10 Sq.Mt. ₹ 10,258.00 ₹

specified place etc. complete (FOR ALL FLOOR)

52 White Porselin Urinal with require plastic waste pipe fitting and fixing. 8.00 Each ₹ 1,558.00 ₹

53 Providing & Fixing P.V.C. flexible pipe for wash basin. 60.00 Each ₹ 50.00 ₹

54 Cinder filling in sunk of toilet wash as specified (FOR ALL FLOOR). 39.00 Cu.Mt. ₹ 476.00 ₹

55 Providing and fixing standared extruded of alluminium section of size 63mm x 7.00 Sq.Mt. ₹ 1,163.92 ₹

38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour

Powder Coated alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation. (FOR ALL FLOOR)

56 Suppling & Fixing Lock. 5.00 Each ₹ 50.00 ₹

57 Providing and laying machine cut moulded edges machine marble for sill in 63.00 Sq.Mt. ₹ 2,129.00 ₹

walls in Zigzag pattern 18 mm thick including cutting grooves in walls and

fixing the stone with cement mortar 1:4 and finishing the same with neat

cement slurry in true line and level as directed . etc. complete. (All Open

edges should be full round polished). As per drawing or as per instruction

given by engineer in charge. (FOR ALL FLOOR)

No. Particulars Quantity Unit Rate Estimated cost

Constructing Under Ground & Over Head Water Tank all RCC work including

Steel as per structural drawing, Water tank location & capacity suggested

by Project Architect / Engineer-in-charge, Structural Design by Structural

Engineer and proof checking by RMC / PMC including necessary excavation

& filling work, 15 cm thick base PCC work, bottom & top slab, pardi with

water proofing cement plaster in C.M. 1:2 with smooth finishing, watering ec.

comp. to all inner face of tank & 20 mm thk. sandface cement plaster

consisting base coat of 12 mm thk. in C.M. 1:3 & 8 mm thk. finishing & glazed

tiles (1st Quality) insides of tank of required size in Cement and Joints to be

filled with white cement comp. etc. (Note: Before carring out plaster work on

RCC, required tipping work should be carried out as instructed).

59 Providing and fixing wash down water closet (Anglo Indian type , W.C. Pan) 29.00 Each ₹ 3,477.00 ₹

with integral P trap including jointing the trap with soil pipe in Cement Mortar

1:1 (1 - Cement : 1 - Fine Sand) with plastic seat,Bib Cock 2 in 1 Elbow Valve

Faucet (Wall Mounted),Health Faucet Jet Spray, PVC Dual Flush Tank and

cover for wash down water closer with C.P. brass hinges and rubber buffers.

(A) Vitreous China Pattern : (i) In White Colour

60 Providing and fixing wash down water closet (European type , W.C. Pan) 29.00 Each ₹ 4,025.00 ₹

with integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat,Bib Cock 2 in 1 Elbow

Valve Faucet (Wall Mounted),Health Faucet Jet Spray, PVC Dual Flush Tank

and cover for wash down water closer with C.P. brass hinges and rubber

buffers. (A) Vitreous China Pattern : (i) In White Colour

61 Providing & Fixing White porselin wash bassin indian make size as per site 58.00 Each ₹ 1,261.00 ₹

situatation & Inst.by engg.Incharge, c.i. bracket,Waste Couplin with fitting

Chromium platted topes 25cm plastic waste pipe and 12mm pillar cock with

comp. (FOR ALL FLOOR LEVEL)

62 Providing and fixing Kitchen SS Sink Glosy ASIS 304 Grade x 1mm thick with 1.00 Each ₹ 1,316.95 ₹

over all size 510x432mm & bowl size 445x368x190 including cutting holes in

stone and making good the same including C P 32mm waste pipe .

63 Providing & fixing PVC SWR Nahani Trap IS 14735 for drain with 6 inch x 6 inch 58.00 Each ₹ 300.00 ₹

SS jali of the 7.6 cm nominal diameter of self cleaning design with C.I. Screwed

down or hinged grating including the cost of cutting and making good the

64 Providing and fixing Brass chromium plated screws down bib tap of 15mm 58.00 Each ₹ 184.98 ₹

nominal dia. of approved quality and brand.As per instruction given by

engineer in charge.

65 Providing and fixing Gun Metal Check or Non-return Fullway Wheel Valve. 58.00 Each ₹ 416.47 ₹

66 Providing laying and jointing in true line and level 25mm dia. (5.16 mm 435.00 Rmt. ₹ 77.25 ₹

minimum wall thickness) U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

67 Providing laying and jointing in true line and level 15mm dia. (5.16 mm 435.00 Rmt. ₹ 43.62 ₹

minimum wall thickness) U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

68 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 290.00 Rmt. ₹ 168.67 ₹

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc.complete.[A] 15 mm.

69 Providing & laying P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 110 MM DIA. (OUTER) 116.00 Rmt ₹ 262.00 ₹

with special as per site condition with required jointing solution including

hydraulic testing as approved & directed by engineer-in-charge

70 Providing & laying P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 75 MM DIA. (OUTER) 176.00 Rmt ₹ 127.00 ₹

with special as per site condition with required jointing solution including

hydraulic testing as approved & directed by engineer-in-charge

71 Providing & laying P.V.C. Pipes (RIGID) - 6 Kg. ISI marked 50 MM DIA. (OUTER) 20.26 Rmt ₹ 58.00 ₹

with special as per site condition with required jointing solution including

hydraulic testing as approved & directed by engineer-in-charge

Total of Commercial Building ₹

Grand Total Without GST ₹

Grand Total Without GST ₹