REPAIR / REPLACEMENT OF EARTHING INFRASTRUCTURE AND LT CABLE WORKS FOR 12 WING AF STATION CHANDIGARH

Amount

Dismantling and taking out old and unserviceable earthing complete including detriorated earth plate and GI pipe etc and removal complete all as specified and directed.

Dismantling and taking out old and unserviceable GI /aluminium /copper main earthing leads/ lightning conductors and removal complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out old and unserviceable air termination rod including mounting pipe and removal complete all as specified and directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanize steel earth plate electrode 60 cms x 60 cms x6.00mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate not less than 1.5 metre below normal ground level earth plate surrounded by 15 cm thick and packed alternate layers of charcoal dust and common salt, earth lead wire 4.0 mm by means of bolts ,nuts ,check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron or steel pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade (ISI marked ) with funnel and wire mesh ,including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 5 of MES Sch Part-1 (2009), complete all as specified and directed by Engineer-in-Charge.

All as per Ser item No 4, but using galvanised iron strip 25 x 4 mm as earthing lead

All as per Ser item No 4, but using galvanised iron strip 32 x 6 mm as earthing lead

All as per Ser item No 4, but using copper plate 60 x 60 cm x 3.15 mm thick electrode and 20 x 3 mm copper strip as earthing lead

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire, complete all as specified and directed by Engineer-in-Charge.

All as per Ser item No 8, but 25 x 4 mm galvanised iron strip.

All as per Ser item No 8, but 32 x 6 mm galvanised iron strip.

All as per Ser item No 8, but 32 x 6 mm copper strip.

Material & labour for Aluminium strip 25 x 3.15mm with saddles and fixing screws etc for roof conductors and down conductions above ground complete all as specified.

M&L for air termination, single pointed aluminium rod 12 mm dia and 300 mm long fixed to GI Pipe bracket complete all as specified and directed by Engineer-in-Charge.

M&L for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. Head screw, complete all as specified and directed by Engineer-in-Charge.

M&L for copper joint with making hole 12mm with the help of electric drill machine including 12mm nut bolts washers and brazing upto 32mm x 6mm thick copper earth strip complete all as specified and directed by Engineer-in-Charge.

M&L for aluminium joint with making hole 12mm with the help of electric drill machine including 12mm nuts, bolts and washer and aluminium welding upto 32mm x4mm thick aluminium strip complete all as specified and directed by Engineer-in-Charge.

All as per item No 16 here in before, but GI earth strip upto 32 x 6 mm thick strip and electric welding.

Supply and fix terminal point made out of porceline block heavy duty any height with galvanised iron nuts bolts as per site requirment with saddle complete all as specified and directed by Engineer-in-Charge.

Supply and laying GI tubing 40mm bore GI tubing light grade with all fitting laid in trenches, fixed to wall etc complete all as specified and directed by Engineer-in-Charge.

M & L comman salt with mixing watering for earthing pit complete all as specified and directed by Engineer-in-Charge.

M & L copper sulphate (CuSo4) with mixing watering for earthing pit complete all as specified and directed by Engineer-in-Charge.

M & L magnisium sulphate (MgSo4) with mixing watering for earthing pit complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement funnel with wire mesh, PCC (1:3:6), type C-1 chamber and pit cover of precast RCC (1;2:4), type B-1 reinforced XPM of weight not less than 4 Kg/Sqm with MS frame plaster work inner or outer etc, complete all as specified as per SSR part-I plate No 3 .

M/L for cleaning all unwanted vegetable grass from to earth pit, with the radius of 1 meter apart ,cleaning in inner side and out side for earthing pit complete with three month gap measure and paid six month gap complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement earthing indicator made out of galvanised iron sheet 3 mm thick of size 30 cm x 20 cm x 60 cm height in any shape , having support of angle Iron frame stand of size 25x4 mm, two coat of super enameled first grade quality paint in yellow /Red colour over a coat of red oxide primer including necessary PCC work in 1:4:8 of size 30 cm x 30 cm x30 cm including marking as per users requirement all as directed.

Taking out old unservicable cable from trench of following sizes

50 Sqmm x 3.5 core

35 Sqmm x 3.5 core

16 Sqmm x 2 core

25 Sq mm x4 core

10 Sq mm x 2 core

Supply and lay cable XLPE insulated screended PVC bedded, galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 Volts grade with standarred alluminium conductore of size 50 Sqmm 3.5 corecomplete all as specified and directed by Engineer-in-Charge.

Supply and lay cable XLPE insulated screended PVC bedded, galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 Volts grade with standarred alluminium conductore of size 35 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply and lay cable XLPE insulated screended PVC bedded, galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 Volts grade with standarred alluminium conductore of size 25 Sqmm 4 core, complete all as specified and directed by Engineer-in-Charge.

Supply and lay cable XLPE insulated screended PVC bedded, galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 Volts grade with standarred alluminium conductore of size 16 Sqmm 2 core, complete all as specified and directed by Engineer-in-Charge.

Supply and lay cable XLPE insulated screended PVC bedded, galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 Volts grade with standarred alluminium conductore of size 10 Sqmm 2 core, complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil n.exc 1.50 mtr in depth and n.exc 1.5 mtr wide and getting out including forming bottom surface to required level complete all specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. thick in soft/loose soil after the cables are laid and tested complete all specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all specified and directed by Engineer-in-Charge.

M&L for sand cushioning with dry sand 8 cm thick below the cable and 15 cm above the cable and punned down to 10 cm from top of cable complete all specified and directed by Engineer-in-Charge.

M & L of bricks as in protection of cable laid dry and flat adjacent to each other perpendicular to direction of cable direction of cable complete all specified and directed by Engineer-in-Charge.

Supply and fix in replacement of aviation obstruction lights LED type 48 watts, complete all as specified and directed by Engineer-in-Charge. Make : Bajaj/Havells/Phillips

Supply and fix in replacement of MCCB , 04 poles ,400 Amps, 36 KA, 50Hz,415 volts , Ics=100% of Icu complete all specified and directed by Engineer-in-Charge. Make: Schneider, Legrand , Siemens ,Havells

Supply and fix in replacement of MCCB , 04 Poles ,160 Amps, 25 KA, 50Hz,415 volts , Ics= 70 % of Icu complete all specified and directed by Engineer-in-Charge. Make: Schneider, Legrand , Siemens ,Havells

Supply and fix in replacement of MCCB , 04 Poles ,125 Amps, 25 KA, 50Hz,415 volts , Ics= 100 % of Icu complete all specified and directed by Engineer-in-Charge. Make: Schneider, Legrand , Siemens ,Havells

Supply and fix in replacement of MCCB, 04 Poles , 100 Amps, 25 KA, 50Hz,415 volts , Ics= 75 % of Icu complete all specified and directed by Engineer-in-Charge. Make: Schneider, Legrand , Siemens ,Havells

Note:- Amount of credit of Rs. 258580.00 for retrieved materials is mentioned in Schedule of Credit Page No 108 of tender documents in pdf form which will be deducted offline while acceptance of tender.

PARTAP ENGINEERING WORKS

ELECTROMAX OF INDIA

M/S BALWINDER SINGH

The Rahul Vig

Skyline Encon

HARISH SALES CORPORATION

SANJEEV ENTERPRISES