REFIT OF INSV TARINI AND MHADEI

FOR INSV TARINI - Main Engine - volvo penta D5 130hp - 1000 hrly servicing of engine due

Main Engine - volvo penta D5 130hp - supply of two sets of fuel pump belt

Main Engine - volvo penta D5 130hp - supply of two sets of alternator drive belt

Main Engine - volvo penta D5 130hp - Supply two fuel filters

Main Engine - volvo penta D5 130hp - Supply two oil filters

Main Engine - volvo penta D5 130hp - Supply two fuel pump impellers

Main Engine - volvo penta D5 130hp - Supply two sea water cooling pump impellers

Main Engine - volvo penta D5 130hp - Supply two charges of coolant

Main Engine - volvo penta D5 130hp - Supply two charges of engine oil

Main Engine - volvo penta D5 130hp - Supply two bosch relays for starter

Main Engine - volvo penta D5 130hp - Supply one spare starter motor

Main Engine - volvo penta D5 130hp - Supply one spare starter harness for engine

Main Engine - volvo penta D5 130hp - Manufacture and supply engine turning wrench

Diesel generator Wisper power model M-SC 305 KVA - Servicing of generator including oil change, filter change

Diesel generator - Whisper Power Model M-SC 3.5 KVA - Supply one charge of engine oil

Diesel generator - Whisper Power Model M-SC 3.5 KVA - Supply one spare fuel filter

Diesel generator - Whisper Power Model M-SC 3.5 KVA - Supply five spare sea water cooling impeller pumps

Diesel generator - Whisper Power Model M-SC 3.5 KVA - Siphon break for exhaust system deteriorated. Siphon break to be removed, repaired and refitted

Manual fuel transfer pump - Oil water separator of manual fuel transfer line leaking. To be repaired/ replaced.

Rope Stoppers - Spinlock ZS1214 jammer jaws worn off and not holding rope. Replace ZS worn off ZS1214 jammer jaws

Rope Stopper - Spinlock CAM 0814 jammer jaws worn off. Replace CAM 0814 jammer jaws

Rope Stopper - Spinlock XX0814 power clutch jammer jaws worn off. Replace Spinlock XX0814 power clutch jammer jaws

Rope Stopper - Spinlock XXA0812 power clutch jammer jaws worn off. Replace Spinlock XXA0812 power clutch jammer jaws

Painting of upper deck - Upper deck painting worn off. Entire upper deck surface to be prepared and painted with three coats of yacht specific white anti skid paint including companionway and cockpit.

Painting of internal area - Painting worn off. Undertake surface preparation and carry out painting of entire internal area with three coats of yacht specific white paint including bulkheads, deck head, engine room, steering compartment, bunks, navigation bench and table, galley, floorboards in white (anti-skid where applicable)

Hull painting - Hull painting worn off. Undertake surface preparation and carry out painting of entire hull (except underwater surface) with three coats of yacht specific paint followed by polishing

Anti-fouling - Anti-fouling paint worn off. Undertake surface preparation and carry out painting of entire underwater hull including keel and rudder with three coats of self-polishing copolymer antifouling paint

Berthing hawsers - Berthing hawsers deteriorated. Berthing ropes to be replaced with 200m 8 stranded UV and abrasion resistant polypropylene

Berthing hawsers - Sheets and halyards- 14 mm double braid, spectra / dynema core

Berthing hawsers - Reefing lines – 12 mm double braid, spectra / dynema core

Berthing hawsers - Reefing lines – 12 mm double braid, spectra / dynema core

Berthing hawsers - 8 mm double braid, spectra / dynema core

Berthing hawsers - 6 mm double braid, spectra / dynema core

Berthing hawsers - 5 mm double braid, spectra / dynema core

Berthing hawsers - 2 mm 8 plait messenger line

Berthing hawsers - Whipping twine

Fenders - 05 Fenders damaged. 05 sausage fenders to be procured

Anchor - Anchor cable stopper damaged. Anchor motor non ops. To be repaired/ replaced

Anchor - Rubber mat in cable compartment deteriorated. Rubber mat in cable compartment to be renewed

Deck hatches - Four deck hatches leaking. Remove and refit all deck hatches with fresh PU sealant

Winches & winch handles - Servicing of 09 in no Andersen winches due. Remove, service and refit 09 in no Andersen winches including cleaning and greasing with recommended grease

Winches & winch handles - Supply of 05 winch handles. Replacement of 05 winch handles

Easy stow-Easy stow damaged due fair, wear and tear. Repair/ replace easy stow with water resistant marine UV protective cloth including battens

Spartite - UV protective fabric over Spartite at base of mast perished. Fabricate and install fresh UV protective cover over Spartite at the base of the mast

Jack line for attaching safety harness - Jack line for attaching safety harness on the deck perished. Replace and install old jack lines with new World Sailing approved jack line

Life raft - Plastimo 4 men - Servicing of 04 men Plastimo life raft due. Servicing of 4 men Plastimo life raft to be carried out

Life raft- Lalizas 12 men valise - Servicing of Lalizas 12 men valise life raft due. Servicing to be carried out

Boom and Mast fittings - Tightening of all boom and mast fittings. Tightening of all boom and mast fittings

Stay sail - Servicing of stay sails Stay to be carried out. Stay sail to be repaired (North sails)

Stay sail - Stay sail halyard to be tensioned. Replacement of halyards

Genoa sheet - Genoa sheet chaffed. To be replaced

Gennaker - Tack line for Gennaker chaffed. To be replaced

Baton - Baton holder Brocken. To be repaired /replaced

Baton - Batons Brocken. To be replaced

Running rigging - Chaffed running rigging at multiple places to be assessed and replaced. To be replaced

Rub rail - Rub Rail of 10 m damaged. Damaged portion to be fabricated in teak wood as per sample and fixed using screws and marine sealant

Toilet - Faucet leakage at bathroom. To be replaced. WC hand pump broken

Sea cock valves - 12 sea cock valves corroded. To be replaced

Leakage - Crash bulkhead compartment filling with sea water from anchor locker. To be repaired

Portholes - 09 in nos portholes leaking. To be removed ,resealed with PU sealant and refitted in place

Rope bags - Rope bags on both port and stbd side perished. To be replaced

Wood work - Varnish of woodwork in the interior worn off. Remove old varnish and renew varnishing of wood work in cockpit ,companionway, wash boards, navigation table, galley and bunks

Flares - 05 in no smoke and 05 in no rocket flares outdated. To be replaced

Max prop 3 bladed propeller - Servicing of propeller. (a)Check for damages and rebuild as required (b)carry out greasing of internal propeller gearing (c)check for loose screws and tighten where required (d)Pressure clean the propeller blades (e)Replace wo0rn sacrificial anode

Propeller shaft - Servicing of propeller shaft (a)Check for deflection of shaft and carry out shaft alignment if required (b)Inspect and repair any oitting in the shaft (c)inspect and repair shaft bearing if required (d) Replace worn out blackjack seal on the inboard end of the shaft.

Propeller shaft - Shaft turning at more than 3 kn (a)Check for feathering of propeller blades (b)Shaft lock to be repaired.

Internal tanks - (a) Servicing of 150 L in nos water tanks (4*150L 20M helisteel pipe) (I)open, clean and repaint fresh water tanks (ii)Replace valves and associated pipelines (iii) Refit water tank cover and seal with gasket /PU sealant. (b)Servicing of 06*250L fuel tanks (6*250L 20M helisteel pipe) (I)open, clean and repaint fresh water tanks (ii)Replace valves and associated pipelines (1*50L) (iii) Refit water tank cover and seal with gasket /PU sealant(1*25L 5M helisteel pipe) (c)Servicing of 01*50 L day tank To be opened cleaned and reinstalled. (d)Servicing of black water tank (i)Clean black water tank (ii)Renew plumbing of Blackwater tank.

Dry docking - Dry docking of the boat to be carried out for underwater work package

Deck filling points - Fresh water and fuel filling points. Caps of filling points stuck

Gas Stove - Malfunctioning of stove due to corrosion. To be replaced.

Standing rigging - Inspection and tuning of standing rigging. Inspection and tuning by authorised rigger.

Through hull fittings - Through hull fittings corroded. Replace all through hull fittings, ball valves and flap valves

Diesel generator - Whisper Power Model M-GV4 Piccolo - Remote starting panel at navigation bench not working. Remote starter panel to be operationalised

Diesel generator - Whisper Power Model M-GV4 Piccolo - Generator switching off after 10-15 mins running with Inverter Failure warning annunciation on WP-PMG panel. Identify and rectify defect

Steaming light - Steaming light defective. To be replaced

Hot knife - Hot knife defective. To be repaired/ replaced

Navigation suite - Various displays, electronic compass, GPS, ECDIS, Autopilot controller, Log, Echo sounder, tridata and autopilot unable to share data with each other through Sea Talk Ng. Autopilot non-operational. Identify defect. Repair/ replace faulty equipment. Integrate and calibrate various equipment and prove functioning of autopilot.

Navigation suite - Electronic charts expired. 05 in nos electronic charts to be renewed

Fuel trim pump - 24 V fuel trim pump defective. To be replaced

Fresh water pump - 24V Fresh water pump defective. To be replaced

Sea water pump - 24V Sea water pump defective. To be replaced

EPIRB - GME ACCUSAT EPIRB Model MT404FG due for servicing. To be serviced

Diesel RU day tank gauge - Diesel RU day tank gauge and indicator defective. To be repaired/ replaced and functioning to be proved

INMARSAT Mini C - INMARSAT Mini-C defective. Repair/ replace defective parts. Install Easy Mail software on laptop and undertake functionality checks

Audio system - Stereo speakers, control unit and cabling defective. To be replaced/ repaired

SART - Servicing of SART due. Servicing of SART to be carried out

Tank gauges and sensors - 02 in nos water and 02 in nos fuel gauges and sensors defective. To be replaced with new 24V sensors and gauges and calibrated

Bilge pumps - (a)Engine bilge pump non ops (b)Midship bilge pump non ops (c)NRV of midship bilge corroded Remove bilge pumps, service and refit, replacement of NRVs . Check functioning of float switch

AIS - Poor range on AIS. AIS antenna to be shifted to mast top. Alternatively, VHF antenna to be used for both VHF RT and AIS using splitter

Electrical wiring - Electrical wiring of the boat degraded with excessive carbon deposits. Electrical wiring is 04 years old. Excessive salt deposit on various cables. Replace old electrical wiring of the boat with new wiring including control panel box. New wiring to be secured properly with correct markings

Tracking device - Hand held GPS tracker. SPOT GPS tracker/ YB3 tracker to be procured. Device to have one year subscription

Batteries - 04 in no 160 AH 12V sealed service batteries not holding charge. To be replaced with 04 in 160 AH 12V sealed batteries

Batteries - 02 in no 12V engine starter battery not holding charge. To be replaced with 02 in no 12V sealed batteries

Batteries - 01 in no 12V generator starter battery not holding charge. To be replaced with 01 in no 12V sealed battery

24V to 12V converter - 24V to 12V converter non operational. To be repaired/ replaced

Inverter - 230 V AC output erratic. To be repaired/ replaced

Wind generator - Wind generator sleeve for bearings worn out. To be replaced with new sleeve

Navigation lights - Continuity of cable suspect. Continuity check of cable to be carried out. To be replaced if defective

Navigation lights - Navigation light defective. Navigation light to be replaced

Anchor - Anchor motor and winch servicing due. Make Lewmar 24V. Anchor motor servicing to be carried

Engine control panel - Engine control panel non ops.To be repaired

Ships log - Ships log non ops. To be repaired

Auto pilot - Auto pilot not operational. To be repaired and replaced

Auxiliary Steering - Auxiliary steering to be repaired. Auxiliary steering to be repaired

VHF - Performance suboptimal. To be replaced /Repaired

Gauges - 02 in no water and 02 in no fuel gauges’ /sensors defective. To be replace with new fuel sensors and gauges and calibrated

Battery monitor - For monitoring voltage and current erratic. To be replaced with fresh wiring and calibrated

For INSV MHADEI - Main Engine - volvo penta D5 130hp - 1000 hrly servicing of engine due

Main Engine - volvo penta D5 130hp - supply of two sets of fuel pump belt

Main Engine - volvo penta D5 130hp - supply of two sets of alternator drive belt

Main Engine - volvo penta D5 130hp - Supply two fuel filters

Main Engine - volvo penta D5 130hp - Supply two oil filters

Main Engine - volvo penta D5 130hp - Supply two fuel pump impellers

Main Engine - volvo penta D5 130hp - Supply two sea water cooling pump impellers

Main Engine - volvo penta D5 130hp - Supply two charges of coolant

Main Engine - volvo penta D5 130hp - Supply two charges of engine oil

Main Engine - volvo penta D5 130hp - Supply two bosch relays for starter

Main Engine - volvo penta D5 130hp - Supply one spare starter motor

Main Engine - volvo penta D5 130hp - Supply one spare starter harness for engine

Main Engine - volvo penta D5 130hp - Manufacture and supply engine turning wrench

Diesel generator Wisper power model M-SC 305 KVA - Servicing of generator including oil change, filter change

Diesel generator - Whisper Power Model M-SC 3.5 KVA - Supply one charge of engine oil

Diesel generator - Whisper Power Model M-SC 3.5 KVA - Supply one spare fuel filter

Diesel generator - Whisper Power Model M-SC 3.5 KVA - Supply five spare sea water cooling impeller pumps

Diesel generator - Whisper Power Model M-SC 3.5 KVA - Siphon break for exhaust system deteriorated. Siphon break to be removed, repaired and refitted

Manual fuel transfer pump - Oil water separator of manual fuel transfer line leaking. To be repaired/ replaced.

Rope Stoppers - Spinlock ZS1214 jammer jaws worn off and not holding rope. Replace ZS worn off ZS1214 jammer jaws

Rope Stopper - Spinlock CAM 0814 jammer jaws worn off. Replace CAM 0814 jammer jaws

Rope Stopper - Spinlock XX0814 power clutch jammer jaws worn off. Replace Spinlock XX0814 power clutch jammer jaws

Rope Stopper - Spinlock XXA0812 power clutch jammer jaws worn off. Replace Spinlock XXA0812 power clutch jammer jaws

Painting of upper deck - Upper deck painting worn off. Entire upper deck surface to be prepared and painted with three coats of yacht specific white anti skid paint including companionway and cockpit.

Painting of internal area - Painting worn off. Undertake surface preparation and carry out painting of entire internal area with three coats of yacht specific white paint including bulkheads, deck head, engine room, steering compartment, bunks, navigation bench and table, galley, floorboards in white (anti-skid where applicable)

Hull painting - Hull painting worn off. Undertake surface preparation and carry out painting of entire hull (except underwater surface) with three coats of yacht specific paint followed by polishing

Anti-fouling - Anti-fouling paint worn off. Undertake surface preparation and carry out painting of entire underwater hull including keel and rudder with three coats of self-polishing copolymer antifouling paint

Berthing hawsers - Berthing hawsers deteriorated. Berthing ropes to be replaced with 200m 8 stranded UV and abrasion resistant polypropylene

Fenders - 05 Fenders damaged. 05 sausage fenders to be procured

Anchor - Anchor cable stopper damaged. Anchor motor non ops. To be repaired/ replaced

Anchor - Rubber mat in cable compartment deteriorated. Rubber mat in cable compartment to be renewed

Deck hatches - Four deck hatches leaking. Remove and refit all deck hatches with fresh PU sealant

Winches & winch handles - Servicing of 09 in no Andersen winches due. Remove, service and refit 09 in no Andersen winches including cleaning and greasing with recommended grease

Winches & winch handles - Supply of 05 winch handles. Replacement of 05 winch handles

Easy stow-Easy stow damaged due fair, wear and tear. Repair/ replace easy stow with water resistant marine UV protective cloth including battens

Spartite - UV protective fabric over Spartite at base of mast perished. Fabricate and install fresh UV protective cover over Spartite at the base of the mast

Jack line for attaching safety harness - Jack line for attaching safety harness on the deck perished. Replace and install old jack lines with new World Sailing approved jack line

Life raft - Plastimo 4 men - Servicing of 04 men Plastimo life raft due. Servicing of 4 men Plastimo life raft to be carried out

Life raft- Lalizas 12 men valise - Servicing of Lalizas 12 men valise life raft due. Servicing to be carried out

Boom and Mast fittings - Tightening of all boom and mast fittings. Tightening of all boom and mast fittings

Stay sail - Servicing of stay sails Stay to be carried out. Stay sail to be repaired (North sails)

Stay sail - Stay sail halyard to be tensioned. Replacement of halyards

Genoa sheet - Genoa sheet chaffed. To be replaced

Gennaker - Tack line for Gennaker chaffed. To be replaced

Baton - Baton holder Brocken. To be repaired /replaced

Baton - Batons Brocken. To be replaced

Running rigging - Chaffed running rigging at multiple places to be assessed and replaced. To be replaced

Rub rail - Rub Rail of 10 m damaged. Damaged portion to be fabricated in teak wood as per sample and fixed using screws and marine sealant

Toilet - Faucet leakage at bathroom. To be replaced. WC hand pump broken

Sea cock valves - 12 sea cock valves corroded. To be replaced

Leakage - Crash bulkhead compartment filling with sea water from anchor locker. To be repaired

Portholes - 09 in nos portholes leaking. To be removed ,resealed with PU sealant and refitted in place

Rope bags - Rope bags on both port and stbd side perished. To be replaced

Wood work - Varnish of woodwork in the interior worn off. Remove old varnish and renew varnishing of wood work in cockpit ,companionway, wash boards, navigation table, galley and bunks

Flares - 05 in no smoke and 05 in no rocket flares outdated. To be replaced

Max prop 3 bladed propeller - Servicing of propeller. (a)Check for damages and rebuild as required (b)carry out greasing of internal propeller gearing (c)check for loose screws and tighten where required (d)Pressure clean the propeller blades (e)Replace wo0rn sacrificial anode

Propeller shaft - Servicing of propeller shaft (a)Check for deflection of shaft and carry out shaft alignment if required (b)Inspect and repair any oitting in the shaft (c)inspect and repair shaft bearing if required (d) Replace worn out blackjack seal on the inboard end of the shaft.

Propeller shaft - Shaft turning at more than 3 kn (a)Check for feathering of propeller blades (b)Shaft lock to be repaired.

Internal tanks - (a) Servicing of 150 L in nos water tanks (4*150L 20M helisteel pipe) (I)open, clean and repaint fresh water tanks (ii)Replace valves and associated pipelines (iii) Refit water tank cover and seal with gasket /PU sealant. (b)Servicing of 06*250L fuel tanks (6*250L 20M helisteel pipe) (I)open, clean and repaint fresh water tanks (ii)Replace valves and associated pipelines (1*50L) (iii) Refit water tank cover and seal with gasket /PU sealant(1*25L 5M helisteel pipe) (c)Servicing of 01*50 L day tank To be opened cleaned and reinstalled. (d)Servicing of black water tank (i)Clean black water tank (ii)Renew plumbing of Blackwater tank.

Dry docking - Dry docking of the boat to be carried out for underwater work package

Deck filling points - Fresh water and fuel filling points. Caps of filling points stuck

Gas Stove - Malfunctioning of stove due to corrosion. To be replaced.

Standing rigging - Inspection and tuning of standing rigging. Inspection and tuning by authorised rigger.

Through hull fittings - Through hull fittings corroded. Replace all through hull fittings, ball valves and flap valves

Backstay vibration - Due to protrusion of leech of main sail. Maintenance required

Stay sail furler - Stay sail furler damaged. To be replaced

Diesel generator - Whisper Power Model M-GV4 Piccolo - Remote starting panel at navigation bench not working. Remote starter panel to be operationalised

Diesel generator - Whisper Power Model M-GV4 Piccolo - Generator switching off after 10-15 mins running with Inverter Failure warning annunciation on WP-PMG panel. Identify and rectify defect

Steaming light - Steaming light defective. To be replaced

Hot knife - Hot knife defective. To be repaired/ replaced

Navigation suite - Various displays, electronic compass, GPS, ECDIS, Autopilot controller, Log, Echo sounder, tridata and autopilot unable to share data with each other through Sea Talk Ng. Autopilot non-operational. Identify defect. Repair/ replace faulty equipment. Integrate and calibrate various equipment and prove functioning of autopilot.

Navigation suite - Electronic charts expired. 05 in nos electronic charts to be renewed

Fuel trim pump - 24 V fuel trim pump defective. To be replaced

Fresh water pump - 24V Fresh water pump defective. To be replaced

Sea water pump - 24V Sea water pump defective. To be replaced

EPIRB - GME ACCUSAT EPIRB Model MT404FG due for servicing. To be serviced

Diesel RU day tank gauge - Diesel RU day tank gauge and indicator defective. To be repaired/ replaced and functioning to be proved

INMARSAT Mini C - INMARSAT Mini-C defective. Repair/ replace defective parts. Install Easy Mail software on laptop and undertake functionality checks

Audio system - Stereo speakers, control unit and cabling defective. To be replaced/ repaired

SART - Servicing of SART due. Servicing of SART to be carried out

Tank gauges and sensors - 02 in nos water and 02 in nos fuel gauges and sensors defective. To be replaced with new 24V sensors and gauges and calibrated

Bilge pumps - (a)Engine bilge pump non ops (b)Midship bilge pump non ops (c)NRV of midship bilge corroded Remove bilge pumps, service and refit, replacement of NRVs . Check functioning of float switch

AIS - Poor range on AIS. AIS antenna to be shifted to mast top. Alternatively, VHF antenna to be used for both VHF RT and AIS using splitter

Electrical wiring - Electrical wiring of the boat degraded with excessive carbon deposits. Electrical wiring is 04 years old. Excessive salt deposit on various cables. Replace old electrical wiring of the boat with new wiring including control panel box. New wiring to be secured properly with correct markings

Tracking device - Hand held GPS tracker. SPOT GPS tracker/ YB3 tracker to be procured. Device to have one year subscription

Batteries - 04 in no 160 AH 12V sealed service batteries not holding charge. To be replaced with 04 in 160 AH 12V sealed batteries

Batteries - 02 in no 12V engine starter battery not holding charge. To be replaced with 02 in no 12V sealed batteries

Batteries - 01 in no 12V generator starter battery not holding charge. To be replaced with 01 in no 12V sealed battery

24V to 12V converter - 24V to 12V converter non operational. To be repaired/ replaced

Inverter - 230 V AC output erratic. To be repaired/ replaced

Wind generator - Wind generator sleeve for bearings worn out. To be replaced with new sleeve

Navigation lights - Continuity of cable suspect. Continuity check of cable to be carried out. To be replaced if defective

Navigation lights - Navigation light defective. Navigation light to be replaced

Anchor - Anchor motor and winch servicing due. Make Lewmar 24V. Anchor motor servicing to be carried

Engine control panel - Engine control panel non ops.To be repaired

Ships log - Ships log non ops. To be repaired

Auto pilot - Auto pilot not operational. To be repaired and replaced

Auxiliary Steering - Auxiliary steering to be repaired. Auxiliary steering to be repaired

VHF - Performance suboptimal. To be replaced /Repaired

Gauges - 02 in no water and 02 in no fuel gauges’ /sensors defective. To be replace with new fuel sensors and gauges and calibrated

Battery monitor - For monitoring voltage and current erratic. To be replaced with fresh wiring and calibrated

Light fittings - engine room and kitchen light not working. To be replaced

Fan - Stbd side fan not working. To be repaired/ replaced