Construction of Primary Health Centre building Level-II alongwith Residential Units at Raja ka Talab in Tehsil Fatehpur Distt. Kangra H.P.

Amount

Excavation in foundation, trenches etcetera in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work . jumper blasting work , soft and hard blasting and doing work in saturated soil conditions upto any depth and lift including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation with in all leads & lifts as directed by the Engineer-in-charge and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus unserviceable excavated earth as per specification, . approved drawing .design as per the entire satisfaction and direction of the Engineer -in -Charge including carriage of material with in all leads lifts and other incidental. The rate includes royality, octroi, sale tax, malkhana, G.S.T. and all other of taxes as imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work , soft and hard blasting or any other mixed classification of soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering, pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including cleaning of slush which may arise during dewatering including dressing of sides and bed and disposing of all excavated earth upto all leads and lifts, disposed earth to be levelled and neatly dressed as directed by the Engineer-in Charge including carriage of materials within all leads and lifts and other incidental charges. The rate includes royality charges, octroi, sale tax, malkhana, G.S.T. and all other of taxes as imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying crushed stone or brick aggregates 40mm (forty millimeter) nominal size in soak pit as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete including carriage of materials within all leads and lifts and other incidental. The rate including Royality charges, Malkhana, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads and lifts and other incidental. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunchings, cantilevers, bressumers and lintels upto any heights/depths / thickness upto all floor level including carriage of materials within all leads and lifts and other incidental. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars, post and struts (square rectangular or polygonal in plan) in any heights / thickness/depths etcetera upto all foor level including carriage of materials within all leads and lifts and other incidental. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width etcetera upto all floor level including carriage of materials within all leads and lifts and other incidental. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing upto all floor level including carriage of materials within all leads and lifts and other incidental. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frames 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like, upto all floor level including carriage of materials within all leads and lifts and other incidental. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement isto six sand isto twelve graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size) vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including Royality, Malkhana, Octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement isto four sand isto eight graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size) vibrated and mechanically mixed and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate) 40mm (Forty milimetres) nominal size) and curing complete excluding the cost of form work, in foundation and plinth in all depths/thickness including pumping or bailing out water/ dewatering and removal of slush as required at site complete including carriage of materials within all leads and lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, basis of columns and the like and mass concrete in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, and specification, entire satisfaction as and directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , designs, specification entire satisfaction and as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other of taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic meter and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness etcetera up to all floor level including carriage of materials within all leads, liftsand other incidental charges as per approved drawings , design, and specification, entire satisfaction and as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated upto all floor levels cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate) 20mm (Twenty millimetre) nominal size) and curing complete including form work in string courses, coping, bed plates, anchor blocks plain windows sills and the like upto all floor level including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification entire satisfaction, and as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-20(M-twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimeters) with cement contents not less than 320 kg (three hundred twenty kilogramme) per cubic metre and curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases ( except spiral stair cases) excluding landing but including preparing of top surfaces and finishing of nosing upto all floor level including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification entire satisfaction, and as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated upto all floor levels cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed to obtain the minimum compressive strength corresponding to grade M-20 (M-Twenty) and curing complete to give a smooth and even surface including centring and shuttering but excluding cost of reinforcement in kerbs, steps and the like complete including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification entire satisfaction, and as directed by Engineer in charge. The rate including Royality charges, Octroi, Malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:1½:3 (One cement isto one and half sand isto three graded/ crushed stone aggregate) 20mm (Twenty milimetres) nominal size mix designed, so as to give a compressive strength corresponding to RCC grade M-25 (M-Twenty five) with cement contents not less than 400kg (Four hundred kilogrammes) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in foundation, footings bases of columns and the like and mass concrete including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:1½:3 (One cement isto one and half sand isto three graded crushed/ broken stone aggregate) 20mm (Twenty millimeters) nominal size) mix designed to obtain the minimum compressive strength of grade M-25 (M-twenty five) including curing complete, excluding cost of form work and reinforcement for reinforced concrete work, in walls (any thickness) but not less than 0.10mtr. (zero point one zero metre) including attached pilasters, buttresses, plinth and string courses etcetera from top of foundation upto all floor level and curing complete including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification entire satisfaction, and as directed by Engineer in charge. The rate including Royality charges, Octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying Mild/Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding straightening and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentials. The rate including of royality charges, octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Providing and laying damp proof course 38mm ( thirty eight millimeters ) thick with cement concrete 1:2: 4 (one cement isto two sand isto four graded /crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size) including the form work and curing complete as required at site. The rate including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including of royality charges, octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 ( eighty/ one hundred ) or equivalent) using 1.70 Kg(one point seven zero)Kilogramme per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked in kerosene oil complete including carriage of material with in all leads, lifts and other incidential as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including of royality charges, octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1;6( one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental charges as per approved drawing desing, specification as per entire satisfaction and direction of Engineer in charge . The rate including of royality charges, octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Half brick masonry using second class common burnt clay building bricks in super structure above plinth level in all heights / floor level in cement mortar 1:4 ( one cement isto four sand) and curing complete including carriage of materials within all leads, lifts and other incidental charges as per approved drawing desing, specification as per entire satisfaction and direction of Engineer in charge . The rate including of royality charges, octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in Mud Mortar including carriage of materials within all leads, lifts and other incidental charges as per approved drawing desing, specification as per entire satisfaction and direction of Engineer in charge . The rate including of royality charges, octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all depths/heights including racking out joints in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as per direction of Engineer-in-charge. The rate including of royality charges, octroi, sale tax, Malkhana, GST and all other taxes as imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all heights/ depths including pumping or bailing out water/dewatering including racking out joints in cement mortar 1:5 (One cement isto five sand) as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentials. The rate including royality charges, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 19mm (nineteen millimeter) thick commercial Board water proof shutters for cup boards including fixing with nickel plated bright finished piano hinges with necessary screws etcetera complete including carriage of materials within all leads, lifts and other incidental charges as per approved drawing desing, specification as per entire satisfaction and direction of Engineer in charge . The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge shutter using galvanized Mild steel wire gauge of I.S.gauge designation 85-G ( eighty five-G )with wire of diameter 0.56mm (zero point five six millimeters)for doors, windows, and clerestory windows including bright finished / black enamelled iron butt hinges with necessary screws as per specification, approved drawing, design as per entire satisfaction and direction of the Engineer-in-charge including carriage of material with in all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 12mm (Twelve millimeters) thick and 150mm (One hundred fifty milimeters) wide first class deodar wood pelmet with 25mm (twenty five millimetres) diameter wooden curtain rods and brackets including fixing with 25x3mm (Twenty five into three millimetres) MS flat 10cm (Ten centimeters) long and plugs and necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing M.S. (Mild steel) plain grills of required patterns in wooden/angle iron steel frames of windows etcetra with M.S. (Mild steel) Flats, square or round bars with round headed bolts and nuts or by screw including welding with frames complete in all respect and carriage of material within all leads, lifts and other incidental charges as per approved drawing desing, specification as per entire satisfaction and direction of Engineer in charge . The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 300x16mm (three hundred into sixteen millimeter) size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 250x16mm (two hundred fifty into sixteen millimeter) size anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per specification, approved drawings, design, entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten millimeter) anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental. as per specification, approved drawings, design, entire satisfaction and as per the direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental. as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 100x10mm (one hundred into ten millimeter) anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental. as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 125mm ( one hundred twenty five millimeters ) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per specifications, approved drawing, design, entire satisfaction and or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 75mm ( seventy five millimeters ) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per specifications, approved drawing, design, entire satisfaction and or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 150 x 10mm (one hundred fifty into ten millimeter) Mild steel tower bolts, (Barrel type) with necessary screw etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) Mild steel handle with necessary screw etcetera complete including carriage of materials with in all leads lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) Mild steel single acting spring hinges bright finished with necessary screw etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 200mm (two hundred millimetre) sizeoxidized mild steel hooks and eyes complete in all respect as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five millimetres) special quality bright finished brass cup board locks or wardrobe locks of Indian make of approved quality with six levers including necessary screws etcetera. complete including carriage of material with in all leads and lifts as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying automatic hydraulically compressed and polished precast terrazo tiles of ISI marked No.IS 1237 of size 30x30cm (thirty into thirty centimeter) and 20mm (twenty millimeter) thick with marble chips of specified sizes, laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimeter) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete upto all floor level with tiles of silver grey shade as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying 20mm (twenty millimeters) thick White Makrana marble work (table rubbed and polished) in flooring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement isto three sand) including jointing with cement mortar 1:2 (one white cement is to two marble dust) with an admixture of pigment to match the shade of marble complete as per specifications, approved drawing and design, entire satisfaction and as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and laying upto all floor level White glazed tiles 300x450mm (three hundred into four hundred fifty millimeter) size and 6mm (six millimeters) thick of approved brand and make (Kajaria/Nitco/Naveen tiles or its equivement) in skirting, risers of steps and dado for all heights, on 12mm (twelve millimeters) thick cement plaster 1:3 (one cement is to three sand) and jointed with white cement slurry complete including carriage of materials with in all leads and lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

40mm (forty millimeter) thick cement concrete flooring 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) mixed mechanically laid in one layer finished with a floating coat of neat cement including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

15mm (fifteen millimetre) thick cement plaster skirting or dado upto any height with cement morter 1:3 (1 cement isto three sand) finished with a floating coat of neat cement including rounding of junction with floor and carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, malkhana, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing automatic hydraulically compressed and polished precast terrazo tiles of ISI marked No.IS 1237 20mm (twenty millimeter) thick with marble chips of specified sizes, laid in skirting, risers of steps and dado upto any height on 10mm (ten millimeter) thick cement plaster 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete upto all floor level with tiles of silver grey shade as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, malkhana, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeter) thick prepainted steel sheet in roofing hot dipped metallic zink coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia meter with prepainted limpet and rubber washers complete with all accesoriees as required as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing velley 60cm (sixty centimeters) overall with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) diameter with prepainted galvanised iron limpet and bitumen washer complete with all accessories as required as per the direction of the Engineer-in-charge including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimeter) overall with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster(RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five ) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diameter and prepainted galvanised iron limpet and bitumen washer complete with all accessories as required as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing M,S. (Mild steel) BP (Black plain) sheet 1.66mm to 2mm (one point six six milimetres to two milimetres) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 0.63mm (Zero point six three milimetres) thick plain galvanised iron sheet 15cm (Fifteen centimeters) wide 45cm (Forty five centimetres) overall semicircular plain G.I. (Galvanised iron) sheet gutter with iron brackets 40x3mm (Forty into three milimetres) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and Fixing on wall faces 100mm (one hundred millimeter) diameter P.V.C. (polyvinyl chloride) (D-Plast) or its equivalent rain water pipe of working pressure not less than 4.5kg (four point five kilogramme) per square meter including filling the joints with adhesive of approved make complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and Fixing on wall faces Poly Vinyl Chloride (D-plast) or its equivalent accessories for rain water pipe including filling the joints with approved adhesive complete 100mm (one hundred millimeters) diameters Plain bend complete as per specifications, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and Fixing on wall faces Poly Vinyl Chloride (D-plast) or its equivalent accessories for rain water pipe including filling the joints with approved adhesive complete 100mm (one hundred millimeters) diameters Plain shoes complete as per specifications, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimetres) diameter, cast iron mild steel Holder Bat clamps of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 100mmx100mmx100mm (one hundred millimeters into one hundred millimetres into one hundred millimetres) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls etcetra complete as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) diameter, cast iron mild steel Holder Bat clamps of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 100mmx100mmx100mm (one hundred millimeters into one hundred millimetres into one hundred millimetres) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm(twenty millimetre) nominal size) mix including cost of cutting holes and making good the walls etcetra complete as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or / and residual bitumen applied hot at 1.45 kg(one decimal four five kilogramme) per square metre of area for each course second course of roofing felt type 3 (three) grade 1 (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm (six millimetre) and down size or pea sized gravel spread at 6 cu.dm or 0.006 cu.m) per square metre including preperation of surface excluding grading complete as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) over water proofing treatment and curing complete as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (one cement isto three sand) over 12 mm (twelve millimeter) layer of cement mortar 1:3 (one cement isto three sand ) and finished neat and curing complete as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads,lifts and other incidental. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing angle iron door, windows, clerestory windows frame ( Single Rebate ) manufactured from M.S. angle iron section of 40x40x6mm ( forty into forty into six millimetres ) thickness and M.S. flat 50x5mm ( fifty into five millimetres ) in combination welded together to make one frame as per design and drawing including hinges. Jamb .lock jamb ,beed and if required angles thrashold of mild steel angle 50x25mm ( fifty into twenty five millimetres ) welded or rigidly fixed by mechnically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two decimal five millimetres ) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm ( twenty five into twenty five into five millimetres ) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm( twenty five into twenty five millimetre ) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm ( two decimal five millimetres ) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete as per specifications, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing of openable windows with fly mesh made of prepainted steel windows (Elixer-2000 Series) (Base steel as per IS-513 of 0.58mm (zero decimal five eight millimeter) thick galvanized as per IS: 277 with zink of 150mm (One hundred fifty millimeter) GSM primer quoted with epoxy primer of 5-7 (five to seven) micron thick finish painted with a polyster paint of 12-16 (twelve to sixteen) micron thick and back coated with 5-7 (five to seven) micron thick alked backer section for outer frame of 72x55mm (seventy two into fifty five millimeter) centre mullion 72x50mm (seventy two into fifty millimeter) section for fixed glass beading sector of 12x12mm (twelve into twelve millimeter) and section for shutter of 47x20mm (forty seven into twenty millimeter) and outer frame and mullion section with rebate for glazed shutter fly mesh and a 20mm (twenty millimeter) provision for guard bars/grills and fly mesh shutter section of 20x40mm (twenty into forty millimeter) and the section cut to length metre jointed with corner bracket centre million fixed using mullion cap and stay handles, latch 2 Nos. (two numbers) of heavy duty stainless steel pivot hinges per shutter and paneled with 5mm (five millimeter) thick plain float glass and SS for fly mesh shutter (304 grade) fitted using rubber gasket including fixing the windows in the concrete masonary wall by means of self expending screws including 10mm (ten millimeter) square guard bars with 6 (six) inches pitch complete for nished item of work as per drawing and design and as per direction of Engineer-in-charge (BMT-P-31) a) Double shutter centre fixed both side openable shutter window (1524mm x 1219.20mm) (one thousand five hundred twenty four into one thousand two hundred nineteen point twenty millimeter) outer frame section size of 72x50mm (seventy two into fifty millimeter) shutter section size of 47x20mm (forty seven into twenty millimeter) (Item code BMT-P-09) including top hung ventilators as per specification, approved drawing, design, as per entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Steel work welded in built up sections, trusses and framed work, composed of beams, joists, channel, angles, tees, flats with connecting plates or angle cleats etcetra as in trusses and trussed purlins, main and cross beams, hip and tack rafters purlins connected to common rafter and the like in building including cutting fixing liftings, hoisting and placing in position complete and applying a priming coat of red lead paint compete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. (b) in trusses and trussed purlins in buildings.

Steel work welded in built up sections, trusses and framed work composed of beam, joists, channels, angles, tees, flat with connecting plates or angle cleats etcetra as in trusses and trussed purlins, main and cross beams hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete, as per the instruction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. (a) in gratings framed guard bars, ladders, railings , brackets and similar works ,ceiling frames etcetra.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt dust and other foreign matter with enamel paint other than white including carriage of materials within all leads and lifts and other incidentals and as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foregin matter, sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints or its equivalent) complete as per specifications, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white including carriage of materials within all leads, lifts and other incidental and as per specification, approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and laying 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3(one cement isto three sand) upto all floor level and curing complete including carriage of materials with in all leads, lifts and other incidental as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and applying 15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 6 ( one cement isto six sand) in single coat on rough side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles ,chamfers and / or rounded angles in all girth and finished even and smooth as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and applying 15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 6 ( one cement isto six sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles ,chamfers and / or rounded angles in all girth and finished even and smooth as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and applying 15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 3 ( one cement isto three sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles, chamfers and / or rounded angles in all girth and finished even and smooth including mixing water proofing material in proportion recommended by the manufacturer finished with a floating coat of neat cement including carriage of materials with in all leads, lifts and other incidental charges and as per specification approved drawings, design as per entire satisfaction and direction of the Engineer in charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and applying 15 mm (fifteen millimeter) thick cement plaster with cement mortar 1 : 3 ( one cement isto three sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal, rounded angles ,chamfers and / or rounded angles in all girth and finished even and smooth as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Wall painting (two or more coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

White washing with lime on undecorated wall surfaces two or more coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar, drops and other foreign matter upto all floor level as per specifications, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

White washing with lime on undecorated ceiling/sloping roofs two or more coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign matter upto all floor level as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Distempering (two or more coats)with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian or its equivalent) and of required shade on undecorated wall surfaces to give an even shade over and including priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer upto all floor level including carriage of materials within all leads, lifts, and other incidentals and as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and laying stone filling tightly hand packed under floors including carriage of materials within all leads, lifts, and other incidentals and as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and laying automatic hydraulically compressed and polished precast checkered terrazo tiles of ISI marked 20mm (twenty millimeter) thick with marble chips of specified sizes laid in floors, treads of steps and landing on a bed of 25mm (twenty five millimeter) average thickness of cement mortar 1:6 (One cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete upto all floor level with tiles of medium shade including carriage of materials with in all leads and lifts. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing M.S. (Mild steel) 100mm (One hundred millimeter) diameter pipe for porch including carriage of materials within all leads, lifts, and other incidentals and as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing M.S. (Mild Steel) fan clamps type-I of 16mm (sixteen millimetre) diameter M.S. bars bent to shape with hooked ends in R.C.C. (reinforced cement concrete) slab during laying including painting the exposed portion of loop all as per standard design complete as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and laying 60mm (sixty millimetre) thick heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 (M-fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five millimeter) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providng and laying cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty milimetres) nominal size) for sub base concrete floor for laying of interlocking paver blocks average thickness 50mm (Fifty milimetres) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing plinth protection 50mm ( fifty millimeters) thick in cement concrete 1:3:6 ( one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters ) nominal size) and curing complete including finishing the top surface of concrete smooth complete as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeters ) thick ( unconsolidated ) bed of dry brick/broken/ crushed stone aggregate 40mm ( forty millimeters ) nominal size well rammed and consolidated and grouted with fine sand including preparation of groundas per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 12mmx12mm (Twelve milimetres into twelve milimetres) mild steel square bars over mild steel sheet of 16 gauge (sixteen gauge) fixed over angle iron frame 40x40x6mm (Forty into forty into six milimetres) as per approved drawing and design in the triangular portion of roof, porch and dormer complete including carriage of materials within all leads and lifts and other incidental charges as per specification, approved drawings, design as per entire satisfaction and as directed by the Engineer in charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 50mm (Fifty milimetres) diameter mild steel pipe hand rail slip resistant with round ends at two levels as 75cm (Seventy five centimeters) and 90cm (ninety centimeters) height and 25mm (Twenty five milimetres) diameter mild steel hollow pipe balusters of 14 to 16 (Fourteen to sixteen) gauge @ 60cm (Sixty centimetres) centre to centre welded at top with hand rail and embedded in cement concrete including painting with red lead paint after the pretreatment of metal surface complete as per approved design and drawing as specified or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing railing for stair case having balusters of mild steel solid square bars 19mmx19mm and 12mmx12mm (Ninteen milimetres into nineteen milimetres and twelve milimetres into twelve milimetres) size with a clear height of 85cm (eighty five centimeters) at required spacing, embedded in reinforced cement concrete, steps and welded with Eletric welding plant at top alongwith hand rail of hollow rectangular pipe of 14 to 16 (Fourteen to sixteen) gauge 60mmx40mm (Sixty into forty milimetres) size. The balusters welded/jointed with each other with two members M.S. flat 50x5mm (fifty into five millimeter) complete including painting with red lead paint after the pretreatment of the metal surface complete as per approved drawing and design as specified or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing mild steel railing upto a clear height of 90cm (ninety centimeters) for open terrce having balusters of mild steel solid square bars 12mm (Twelve milimetres) at required spacing in combination with mild steel flat 50x5mm (Fifty into five milimetres) and 40x4mm (forty into four milimetres) including cost of fixing mild steel hollow pipe 50mm (Fifty milimetres) diameter moulded hand rail welded over mild steel flat including painting with red lead paint after pretreatment of the metal surface complete as specified as per approved design and drawing or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing Factory made ISI marked No.IS:1003 40mm (forty millimetres) thick flush door shutters interior grade, commercial type, core of block-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including black enamelled M.S. butt hinges complete as per approved drawing, design, specification, entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentials. The rate including royality charges, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 8mm (eight milimetres) thick cement bonded partical board ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing square edges cover fillets (beading) 19mmx6mm (Nineteen milimetres into six milimetres) section of first class Indian Teak Wood including mitring at junctions with wooden screws and nails complete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) oxidized M.S. double acting spring hinges with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Providing and fixing oxidized mild steel fan light catch with necessary screws etcetera complete including carriage of materials with in all leads, lifts and other incidental as per specification, approved drawings, design, entire satisfaction and as per the direction of Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, GST and all other taxes as imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior or its equivalent) and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Colour washing on undecorated wall surfaces (two or more coats) over and including a primarily coat of white washing to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matters as specified, including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) diameter P.V.C.(Poly Vinyl Chloride) of Supreme/ Kishan/ Astral or equivalent Cowl including carriage of materials within all leads and lifts and other incidental charges as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) diameter P.V.C.(Poly Vinyl Chloride) of Supreme/ Kishan/ Astral or equivalent Cowl including carriage of materials within all leads and lifts and other incidental charges as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) diameter P.V.C. (Poly Vinyl Chloride) collar of ISI narked including fixing with approved adhesive etcetra complete and carriage of materials within all leads, lifts and other incidental charges as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) diameter P.V.C. (poly vinyle chloride) sockets of ISI narked including fixing with approved adhesive etcetra. complete and carriage of materials within all leads, lifts and other incidental charges as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) diameter P.V.C. (poly vinyle chloride) sockets of ISI narked including fixing with approved adhesive etcetra complete and carriage of materials within all leads, lifts and other incidental charges as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing 200mm (two hundred milimetres) wide cast iron rungs with chequered or ribbed non slip surface including fixing in manholes/septic tank with 200x200x100mm (Two hundred into two hundred into one hundred milimetres) cement concrete 1:3:6 (one cement isto Three sand isto Six graded stone aggregate 20mm (Twenty milimetres) nominal size) and curing complete, including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing C.I. (cast iron) manhole cover (medium duty) 500mm (Five hundred milimetres) internal dia metre with frame, weight of cover and frame to be not less than 116.00kg (One hundred sixteen kilogramme) (weight of cover 58 kg. (fifty eight kilogramme) and weight of frame 58 kg. (fifty eight kilogramme) including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and lying in trenches ISI marked galvanized mild steel tubes (Medium grade) tube fittings of approved brand and manufacture (TATA/ JINDAL MAKE) complete (earth work in trenches to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. 100mm (One hundred milimetres) nominal bore

Providing and laying in trenches ISI marked 20mm (twenty millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings of approved brand and manufacture (TATA/JINDAL make or its equivalent) complete (Earth work in trenches to be measured and paid for separately) as per specifications approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred millimeter) diameter C.I. (cast iron) sluice valve (with hand wheel) as per IS-780-1984 Class-I upto 300mm (three hundred millimeter) diameter including brass spindle and as per IS:2906 class-II for diameters more than 300mm (three hundred millimeter) complete with bolts, nuts, rubber inserstion etcetra. The tail pieces if required shall be measured and paid for separately) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing C.I. cover with frame (light duty single seal pattern-I) 455x610mm (four hundred fifty five into six hundred ten millimeter) internal dimension total weight of cover and frame to be not less than 38 kg. (thirty eight kilogramme) (weight of frame 15 Kgs. (fifteen kilogramme) and weight of cover 23 Kgs. (twenty three kilogramme) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Constructing water collection chamber with R.C.C. (reinforced cement concrete) top slab 1:2:4 (one cement two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) mix 100mm (one hundred millimeter) thick foundation concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 40mm (forty millimeter) nominal size) inside plastering with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement including curing complete with 150mm (one hundred fifty millimeter) thick walls of R.C.C. (reinforced cement concrete) 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) complete with form work and reinforcement for reinforced concrete work with 6mm (six millimeter) bars at not exceeding 150mm (one hundred fifty millimeter) centres both ways: i) 600x600x750mm (six hundred into six hundred into seven hundred fifty millimeter) inside size as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Constructing chamber for filter media with R.C.C. top slab (reinforced cement concrete) 1:2:4 (one cement isto two sand isto four graded stone aggregate) 20mm (twenty millimeter) nominal size) mix,100mm (one hundred millimeter) thick foundation concrete 1:5:10 (one cement isto five sand isto ten graded stone aggregate) 40mm (forty millimeter) nominal size) inside plastering with cement mortar 1:3 (one cement isto three sand) including curing complete in side size 1200x1200x1200mm (one thousand two hundred into one thousand two hundred into one thousand two hundred millimeter) with 150mm (one hundred fifty millimeter) thick walls of R.C.C.(reinforced cement concrete) 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) complete with form work and reinforcement for R.C.C. (reinforced cement concrete) work with 6mm (six millimetre) bars at not exceeding 150mm (one hundred fifty millimeter) centres both ways including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Constructing manhole with RCC (reinforced cement concrete) top slab in cement concrete 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm (Twenty millimeter) nominal size) mix, foundation concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate) 40mm (forty millimeter) nominal size) in side plastering 15mm (fifteen millimeter ) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. i) Inside size 800x800 mm (eight hundred into eight hundred millimeter) and upto any depth including C.I. cover with frame (light duty single seal patern-I) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal diamensions, total weight of cover and frame to be not less than 38 kg. (thirty eight kilogramme) ( weight of cover 23 kg. (twenty three kilogramme) and weight of frame 15kgs.(fifteen kilogramme) with 200mm (two hundred millimeter) thick walls of brick masonary using second class common burnt clay building bricks of approved quality in cement mortor 1:3 ( one cement isto three sand) as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Construction of brick masonry chambers for under ground C.I. inspection chamber and bends with second class common burnt clay building bricks in cement mortar 1:5 (one cement isto five sand) C.I. (cast iron) cover with frame (light duty) 355mm x 610mm( three hundred fifty five millimeter into six hundred ten millimeter) internal diamensions total weight of cover and frame to be not less than 38 kg. (thirty eight kilogramme) (weight of cover 23kg. (twenty three kilogramme) and weight of frame 15 kg. (fifteen kilogramme) with RCC (reinforced cement concrete) top slab with cement concrete 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter ) nominal size), foundation concrete 1:5:10 ( one cement isto five sand isto ten graded stone aggregate 40mm (forty millimeter) nominal size) inside plaster 15mm(fifteen millimeter) thick with cement mortar 1:3 ( one cement isto three sand ) finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete inside dimensions 455x610x450mm( four hundred fifty five into six hundred ten into four hundred fifty millimeter) deep single pipe line complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) nominal diameter high pressure polyvinyl chloride . spigot and socket soil waste and ventilating pipe including fixing with approved adhesive complete for intel and outlet including carriage of materials within all leads, lifts and other incidental charges as per specification, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-charge . The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimeters) nominal diameter high pressure polyvinyle chloride spigot and socket soil waste and ventilating pipe including fixing with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges as per specification, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75 kg (two point seven five kilogrammes) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surface complete including carriage of materials within all leads and lifts and other incidental charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and placing in horizontal layers filtering media dully graded, screened, washed and cleaned as specified by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. (i) Ist layer (first layer) Bazri 20mm to 25mm (twenty millimeter to twenty five millimeter)

Providing and placing in horizontal layers filtering media dully graded, screened, washed and cleaned as specified by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. 2nd (second) layer coarse sand.

Providing and placing in horizontal layers filtering media dully graded, screened, washed and cleaned as specified by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. 3rd (third)layer Bazri 6mm to 20mm (six millimeter to twenty millimeter)

Providing and placing in horizontal layers filtering media dully graded, screened, washed and cleaned as specified by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. 4th (fourth) layer fine sand (Effective size 0.20mm to 0.40mm (zero point two zero millimeter to zero point four zero millimeter) and uniformity-co-efficient 2.00 to 3.00 (two to three).

Providing and placing in horizontal layers filtering media dully graded, screened, washed and cleaned as specified by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. Bottom layer broken stone aggregates 50mm to 75mm (fifty millimeter to seventy five millimeter)

Providing and fixing P.V.C. (D-Plast) tee ISI marked including fixing with approved adhesive etcetra complete and carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. P.V.C. Tee 100mm (One hundred milimetres) nominal diameter.

Providing and fixing P.V.C. (D-Plast) tee ISI marked including fixing with approved adhesive etcetra complete and carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. P.V.C. Tee 75mm (seventy five milimetres) nominal diameter.

Providing and fixing IS marked big size No. 2071 ( two thousand seventy one) of Cera / Hindware or equivalent in white colour Orrissa Pattern vitreous china water closet squatting pan (Indian type W.C. pan) size 580 x 440mm (five hundred eighty into four hundred forty millimeter) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) . as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing of Cera / Hindware or equivalent viterous china wash down water closet ( EUROPEON TYPE) W.C. (Water closet) pan with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) seat and cover to be measured and paid for separately (EUROPEON SEAT No 2080 (two thosand eighty) Size 530x385x390mm) (five hundred thirty into three hundred eighty five into three hundred ninety millimeter) ( Anglo Indian Universal Closet) including carriage of materials with in all leads, lifts and other incidentals as per specification, approved drawing, design, as per satisfaction and direction the Engineer-in-Charge. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing ISI marked sand cast iron 100mm (One hundred millimeter) size "P" or "S" trap for water closet (squatting pan) including jonting the trap with pan and soil pipe in cement mortar 1:1 ( one cement : one sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 10.00 Ltr. (ten litres) net capacity PTMT coloured/white automatic flushing cistern with a pair of P.V.C./C.I. (cast iron) or M.S. (Mild steel) brackets complete with fittings including P.V.C. syphonic apparatus, mosquito proof lid, P.V.C. Union and coupling for connection with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipes to be measured and paid for separately) including carriage of materials with in all leads, lifts other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 610 x460 mm (six hundred ten into four hundred sixty millimeters) with bowl depth 200 mm. (two hundred millimeters) stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter C.P. brass waste for wash basin or sink as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 32mm dia (thirty two millimeter) diameter nominal size rubber plug for wash basin/sink (Heavy duty makes ISI marked No. 8931 (eight thousand nine hundred thirty one) and 7893 (seven thousand eight hundred ninety three) including carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter M.I. union for wash basin or sink as per specifications, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) diameter P.V.C. (polyvinyl chloride) of Supreme/ Kishan/ Astral or equivalent) waste pipe for wash basin or sink including brass check nut as per specifications, approved, drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) sand cast iron Grating of Jal/Jaguar or equivalent (Heavy duty makes ISI marked IS No. 8931 & 8934 (eight thousand nine hundred thirty one and eight thousand nine hundred thirty four) for gully, floor or Nahni trap as per specifications, approved, drawings, deisgn, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing solid type white plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers as per specifications, approved, drawings, deisgn, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass (atultuff or equivalent make) mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 750x20mm (seven hundred fifty into twenty millimeter) C.P. (chromium plated) Jal/Jaguar or equivalent brass Towel rail complete with C.P. (chromium plated) brass brackets fixed to wooden plugs with C.P. (chromium plated) brass screws as per specification, approved drawings, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass bracket fixed to wooden cleats with C.P. brass screws complete as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, malkhana, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter ISI marked C.P. brass bib tap with capstan head as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter C.P. (chromium plated) Heavy duty makes ISI marked No.8931 and 8934 stop cock, including carriage of materials within all leads, lifts and other incidental as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter ISI marked C.P. brass pillar tap with capstan head as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing ISI marked PVC connection pipe with brass union 45 cm. (forty five centimeter) long and 15mm (fifteen millimeter) noiminal bore complete as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 500 (five hundred) liter net capacity tank P.V.C.(poly vinyl chloride) water storage tank cylindrical shape ( ISI :12701 marked / Treepal layer ) universal or equivalent make ) including providing and fixing 15mm ( fifteen millimeters) nominal bore ball valve, G.I. (galvanized iron ) inlet and out let connection and mosquito proof P.V.C.( poly vinyl chloride) cover with locking arrangement including providing suitable base pad and hoisting upto all heights above ground level including carriage of materials within all leads, lift and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore brass full way valve with wheel complete including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass ball valve (Horizental plunger type) high pressure with polythene plastic floats complete including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing polyethylene aluminium polyethylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black and fitting of kitec or its equivalent confrming to IS- 15450-2004 (fifteen thousand four hundred fifty- two thousand four) for water supply including clamp at one metre spacing cutting fixing and making good the wall etcetra but excluding the cost of fittings (internal work ) pipes exposed on wall internal work. Exposed on wall 1620 (one thousand six hundred twenty)(20 mm OD pipe) (twenty millimeter outer diameter ) including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing plytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 (fifteen thousand four hundred fifty- two thousand four) of kitic/kishan/schedual item or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetra but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1216 (one thousand six hundred twenty)(16 mm OD pipe) (sixteen millimeter outer diameter ) including carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) nominal size P.V.C ( poly vinyle chloride) heel rest bend of ISI marked including fixing with approved adhesive etcetra complete including carriage of materials within all leads, lifts and other incidentals as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) diameter PVC ( poly vinyle chloride) collars ISI marked including fixing with approved adhesive etcetra complete , including carriage of materials within all leads, lifts and other incidental as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and fixing 110x90mm (one hundred ten into ninety millimetre) P V C. ( poly vinyle chloride) floor trap of Supreme/kihsan/ Astral or equivalent ISI marked of self cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and floors etcetera as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 ( one cement : four sand : eight graded / crushed stone aggregate 40mm (forty millimeter) nominal size) bedding for stoneware/P.V.C. pipes of the following internal diameter including necessary form work and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. 230mm (two hundred thirty millimeter) diameter.

Providing and laying cement concrete 1:4:8 ( one cement : four sand : eight graded / crushed stone aggregate 40mm (forty millimeter) nominal size) bedding for stonewareP.V.C. pipes of the following internal diameter including necessary form work and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. 100mm (one hundred millimeter) diameter.

Providing and laying cement concrete 1:4:8 ( one cement : four sand : eight graded / crushed stone aggregate 40mm (forty millimeter) nominal size) bedding for stoneware/P.V.C. pipes of the following internal diameter including necessary form work and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, G.S.T., sale tax and all other taxes as imposed by the Government. 150mm (one hundred fifty millimeter) diameter.

Providing and fixing flat back 630mmx450mm (six hundred thirty into four hundred fifty millimeter) vitreous china wash basin ISI marked of hindware or its equivalent with single hole for pillar tap with C.I. (Cast Iron) or M.S. (mild steel) bracket painted white including cutting holes and making good the same but excluding fittings as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing stainless steel wash basin 550x400mm (five hundred fifty into four hundred millimeters) diamond model code No.WB-2116 with single hole for pillar tap complete with C.I. (cast iron) or M.S. (mild steel) brackets painted white including cutting holes and making good the same but excluding fitting as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan, as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 600mmx120mm (Six hundred miimetres into one hundred twenty milimetres) glass shelf with chromium plated brass brackets and guard rail fixed to wooden plugs with C.P. (chromium plated) brass screws etcetera complete, as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) diameter C.P. (chromium plated) brass shower rose with 15mm (fifteen millimeters) or 20mm (twenty millimeters) inlet as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing vitreous china tooth brush and tumbler holder with necessary screws etcetera complete, as per specifiation, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and laying in trenches 150mm (One hundred fifty milimetres) nominal diameter PVC (D-plast) pipes for the disposal of sewerage working pressure of pipe not less than 4.50 kgs. (Four point five zero kilogrammes) per square metre including fixing with approved adhesive complete (earth work in trenches to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and laying in trenches 100mm (one hundred millimetre) diameter P.V.C. (D-plast) pipe for the disposal of rain water/waste water from collection chamber to tank, working pressure of pipe not less than 4.5 kg. (four point five kilogramme) per square millimetre including fixing with approved adhesive complete (earth work in treanches to be measuread paid for separately) and carriage of materials with in all leads and lifts. The rate including royality charges, octroi, malkana, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing ISI marked P.V.C. (polyvinyl chloride) (D-plast or its equivalent) plain bend 75mm (seventy five millimetre) diameter including fixing with approved adhesive etcetra complete carriage of materials with in all leads and lifts. The rate including royality charges, octroi, malkana, sale tax, G.S.T. and all other taxes as imposed by the Government.

Providing and fixing ISI marked P.V.C.(poly vinyl chloride) (D-plast) or its equivalent plain bend 100mm (one hundred millimetre) diameter including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lift as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing ISI marked P.V.C.(poly vinyl chloride) (D-plast) or its equivalent plain bend 150mm (one hundred millimetre) diameter including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lift as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing ISI marked P.V.C.(poly vinyl chloride) sockets 150mm (one hundred fifty millimetre) diameter including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lift as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and laying (to level or slopes) and jointing with stiff mixture of cement mortar 1:1 (One cement isto one sand) half rounded salt glazed stone ware pipe grade ' A ' of 230mm or 23cm. (two hundred thirty millimeter or twenty three centimetre) internal diameter including testing of pipes and joints complete including carriage of materials within all leads and lift as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing stone ware Gully trap Grade `A` complete with cast iron grating, brick masonry chamber in cement mortar 1:5 (One cement isto five sand) and with water tight cast iron cover with frame of size 300mmx300mm (Three hundred milimetres into three hundred milimetres) (Inside) the weight of cover to be not less than 4.53 kgs. (Four point five three kilogrammes) and weight of frame to be not less than 2.72 kgs. (Two point seven two kilogrammes) square mouth traps of size 150mmx100mm (One hundred fifty milimetres into one hundred milimetres) P or R type complete in all respects including carriage of materials within all leads and lift as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

Providing and fixing Grab bars with chromium plated steel pipe 40mm (Forty milimetres) diameter at 78cm (Seventy eight centimeters) height with mild steel plate 4mm (Four milimetres) thick as per detail and approved design to the position of seat and wash basin with nuts, bolts and clamps etcetera including cutting holes and making good the walls complete in all respects as specified or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T and all other taxes as imposed by the Government.

MUNISH KUMAR