Periodic Service of Compound Wall, Steel Gate, Concertina Coil and other Misc works in Residential Area

M&L forpreparing old plastered surfaces of walls by brooming down and applying one coat of cement base paint all as specified.

M&L for complete removal of existing treatment on external surfaces of walls applying two coats of weather proof exterior emulsion over a coat of exterior primer complete all as specified.

M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying one coat f white wash complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description not other wise described over 10cm idth or girth and applying one coat of synthetic ename paint complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc incl raking out joints, hacking for key scrubbing down with water etc.,

M&L rendering 15mm thick on concrete surfaces or surface other than fair face of brick work or on one side lf lathing, in CM 1:4, finished even and smooth (without using extra cement) complete all as specified.

M&L for preparation of new surfaces of walls over alkali resistant primer & applying two coats of cement base paint all as specified.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to aby type of standard rails straining bolts, incuding, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel ping, etc., as directed (each line wire o be measured)

Providing and fixing in repair concertina coil fencing with punched tape concertina coil 600mm dia 10 metre openable length having 50 Nos rounds per 6 meter length(before stretching) on upto 3m height of wall with Y shaped angle iron brackets placed 2.4m to 3.00m apart, stud tied with GI stapes and GI clips to retain horizontal, including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (R.B.T)/spring core 92.5mm thick) wire of high ensile strength of 165KG/sqcm with tape (0.52mm thick) and weight 43.478gm/m complete all as specified and as directed.

M&L preparing new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed.