Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC | L1 | Accepted-AOC work allotted | |
| 2 | L2₹9.4 L+₹66,595 (7.66%)Rejected-Finance H NO 959 SECTOR 3 ROHTAK | L2 | Rejected-Finance L2 | |
| 3 | L3₹10.1 L+₹1.4 L (16.6%)Rejected-Finance NEAR SECTOR 12 DELHI BAHALGARH ROAD SONEPAT 131001 | SONIPAT | HARYANA | 131001 | L3 | Rejected-Finance L3 |
Tender Value
₹9.3 L
EMD Value
₹18,620
Closing Date
19 Aug 2021, 2:00 pmClosed
Executive Engineer
Executive Engineer, Elect. Division PWD BandR Br., Karnal (0184-2265696)
Construction of Judicial Complex and residential at Kharkhoda Distt. Sonipat (Providing Street Light and Estate Services only)
2021_HRY_182422_1
Street Light JC Kharkhoda
Open Tender
Electrical Works
Works
60 days
Sonipat
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
₹18,620
30 Nov 2021
5 Aug 2021
19 Aug 2021
5 Aug 2021
19 Aug 2021
5 Aug 2021
Amount
23.22.1.9 Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp
23.22.2.1 MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP
23.22.3.1 Supply and erection of sheet steel enclosures 1pole/ 2 pole/4 pole including providing SP/DP/TP/FP MCB on wall/on existing pedestal complete with necessary connections etc, :- SP enclosure suitable for single pole MCB
23.27.2 Supply and election of Goodridge Almirante type M.S. pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. M.S. pedestal of size 750 mm wide, 900 mm high, 300 mm deep and bottom totally open , duly embedded in cement concrete block of size 900 mm*450 mm*200 mm above ground level , having a base of size 1050 mm* 600 mm* 250 mm below ground level.
24.1.1 Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.
24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required.
24.1.6 Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.
24.2.7.2 Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core
24.2.7.3 25 sqmm to 50 sqmm Cable 2 to 4 Core
24.2.8.4 Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer- in-charge of the work. 16 sqmm
24.4.3 Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections.
24.4.5 Supply and erection of Single Phase weather proof M.S. box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A bakellite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on bakellite sheet in the M.S. box including painting and necessary connections.
24.4.8.6 8 Mtr Long pole with top dia 100 mm and bottom 200 mm with base plate of size 325 x 325 x 20 mm.
24.5.2.3 S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia
24.10.1 Digging & refilling of trench 30 cm wide below ground level for erection of pipe/cable (up depth of 1 Mtr. Underground cable excluding the cost of cable/pipe complete in all respect.
24.10.5 Digging of pucca road of required size for making pit for of foundation for street light pole etc complete in all respect upto the entire satisfaction of Engineer-incharge.
24.10.6 Digging of pucca road in required width for laying of cable / pipe complete in all respect upto the entire satisfaction of Engineer-incharge
NS items Supply and erection of metal clad bus bar chamber 415 volt made from 1.6 mm thick M.S.sheet fixed with rag bolts on wall or on existing pedestal / angle iron frame with 4 No. Copper bars 325mm each (Cross section 20x3mm) duly tinned over all size of the chember 375mmx295mmx140mm. Make Havells/ Standard / HPL / Asco / SSk / Geco.
Supply and erection of under ground Aluminum Armoured cable XLPE insulated loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab. 16 Sq. mm 4 Core Cable .
25 Sq. mm 4 Core Cable .
10 Sq. mm 4 Core Cable .
NS S&E of single arms bracket made of 40mm dia GI pipe B class 1.50 mtr. Long with 25mm dia bottom pipe GI with coller pipe (GI) 75 mm dia 60cm Long with MS nipple as required for fixing of fitting duly welded at end of bracket top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge.
Supply, erection and commissioning of Timelite 63 A. 3 pole / 230V Astronomical time switch Indo Asian / Standard / L&T / Havells / C&S make automatic Timer ON/OFF the street light, pillars, wall, MS pedestal where ON/OFF point is available cabinet is fabricated from 22 gauge MS sheet painted, wiring, connection ON/OFF from the bottom of the cabinet the lite DB IP 54 protection complete with Digital timer, 32A. TPN MCB (Indo-Asian), fuse unit, indication lamp suitable for switch from rectifier system, switching system Bakelite connector 32A. Digital timer, auto / manual system, time setter, fiber sheet rubber & plastic components, wiring & component fitting, chemical (Epoxy) including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.
S/E/T/C of 90 watt LED Street Light Luminiaries of Make Bajaj / Surya / Philips/ Wipro with pressure fie cast aluminium housing with lens and accessories required to complete the job in all respect inculding erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work.(N.S) )
S/E/T/C of 150 LED flood light Luminiaries of Make Bajaj / Surya / Philips/ Wipro with pressure fie cast aluminium housing with lens and accessories required to complete the job in all respect inculding erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work
Supply and erection of copper wire of size 1.5 sqmm 3 core including making necessary connection etc. complete with all labour and material to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. Make RR Kabel, Polycab, Havells
DEVENDER KUMAR CONTRACTOR
M/s Rana Electricals
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .