REPAIRS AND MAINT TO JOINERY FLOORING PLASTERING BRICK WALL TILLING SANITARY BATH FITTING AND MISC B AND R WORK AT MD OTM ACCN AT MIL STN RAIWALA

Amount

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and directed.

Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1.50 Sqm complete all as specified and directed.

Refixing of shutters in same opening of any descrption after easing and adjusting , exc 1.00 Sqm but n exc 2.00 Sqm complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description n. exc 1.00 sqm each complete all as specified and directed by Engr-in-Charge.

MS Fastner of size 200 to 250mm for fixing wooden door / window frame and like in postion complete all as specified and directed by Engr-in-Charge.

S&F Powder Coated of any colour (minimum thickness of powder coating 50 micron), aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.

S&F Powder coated of any colour (minimum thickness of powder coating 50 micron), aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges,anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge.

S&F Powder coated of any colour (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and directed by Engr-in-Charge.

S&F Glazing with plain sheet glass, ordinary quality, 5.5 mm thick and glazing with oil putty or aluminium or PVC beading in squares exceeding 0.5 Sq.m in each panel complete all as specified and directed by Engr-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S&F 0.9 mm thick decorative laminates surface finish one side, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions. complete all as specified and directed by Engr-in-Charge.

M&L for 30mm thick Factory made solid WPC (Wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including S.S wire mesh shall be fixed with 15x15 square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density of the shall be as per manufacture instruction complete all as specified and directed by Engr-in-Charge. Make:- ECHON (Kumar Arch Tech Pvt Ltd)/FLORESTA/ARCHIDPLY , Rajshree Plastic Pvt Ltd

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engr-in-Charge.

S&F Factory Made 35 mm thick 100% Solid WPC Single extruded ( Wood polymer Composite ) Moulded Door Shutter Spray Painted with solvent based colour, of required size with 2,4 or 6 raised panel design on front side with 10mm deep mould on single side with grain texture comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 600 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company

Providing and fixing factory made 35 mm thick 100% solid WPC window glazed shutter / wire mesh shutter 95 mm x35mm thick. Made from WPC material with density not less than 800 kg/cum. All four corner are fusion welded & screwed with 8 x 50mm self-screws for additional strength. After joining all 4 corner clear space to be paneled with 5mm thick glass / S S mosquito mesh after glazing of inside of shutter 10 x 12mm pvc “L” shape bead to be nailed or sticked with shutter. Provided 2 Nos SS hinges of 100 mm, 1 Nosaluminium handle of 125 mm ,2 Nosaluminium tower bolt of 125mm and 01 peg stay for each shutter (Glazed and Gauzed) incl factory made 100 % solid WPC window frame 125 mm x 65 mm double rebated frame & mullion 125 x 80mm. made from WPC (Single extruded process) material comparising of virgin PVC polymer of K value 57-60 (suspension grade), calcium carbonate and natural fibers (Wood powder/ rice husk/wheat husk) and nontoxic additives fabricated with meter joints after applying PVC solvent cement & screwed with fully body treated star headed screws having minimum frame desity not less than 800 kg / cum, having good screw holding capacity (screw withdrawal strength of (min 990N). Minimum compressive strength of 58 N/mm2. Modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / mosquito proof & fire retardant & fixed in position with fasteners / hold fast of required size. Window shall be provided with MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat including painting with countersunk holes at both vertical ends. Gap between the bars should not be more than 125mm. All as per specification drawing as directed by Engr-in-charge Note - (i) Glazed and Gauzed shutter both are deemed in this quoted rate (ii) Glass pane, wire mesh and grill are deemed in this quoted rate

M&L for Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodized barrel tower bolt of 12 mm dia and 200 mm length of extruded section (ISI Marked). Complete all as specified and directed complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodized barrel tower bolt of 12 mm dia and 300 mm length of extruded section .(ISI Marked). Complete all as specified and directed by Engineer in Charge.

S&F in repair Aluminium anodized barrel tower bolt of 12 mm dia and 300 mm length of extruded section (ISI Marked) .Complete all as specified and directed by Engineer in Charge.

S&F Extruded Aluminium alloy handles,fabricated type, anodised 150 mm long,(ISI Marked) complete all as specified and directed by Engr-in-Charge.

S&F Extruded Aluminium alloy handles,fabricated type, anodised 125 mm long,(ISI Marked) complete all as specified and directed by Engr-in-Charge.

S&F in repair Extruded Aluminium alloy handles,fabricated type, anodised 150 mm long,(ISI Marked) complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy anodised sliding door bolt, of size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy. complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy anodised sliding door bolt, of size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F Stainless non megnetic steel butt hinges of size 100mm.(ISI Marked). Complete all as specified and directed by Engineer in Charge

S&F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm complete all as specified and directed by Engr-in-Charge.

S&F 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed Note : Shade of the tiles including colour, design and pattern shall be got approved by GE

S&F in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed by Engr-in-charge.

S&F for Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples, fixed in repairs complete all as specified and directed by Engr-in-Charge.

M&L in repairs for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for stainless steel non magnetic curtain rod 25 mm dia with fixing brackets and decorative type knobs both side of each rod.complete all as specified and directed by Engr-in-Charge. Note: - Measurement will be taken between end point of knobs” complete all as specified and directed by Engineer-in-Charge.

S&F in repairs of aluminium door seal upto 1200 mm long on bottom of door complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clips and providing and fixing new one.complete all as specified and directed by Engineer-in-Charge.

S&F Glazing with plain sheet glass, ordinary quality, 5.5 mm thick and glazing with oil putty or aluminium or PVC beading in squares n. exceeding 0.5 Sq.m in each pane. complete all as specified and directed by Engineer-in-Charge.

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane. complete all as specified and directed by Engineer-in-Charge.

S&F in repairs S S peg set, 150 mm complete all as specified and directed. : Prayag model cat part no BEA-30 or equivalent modle of make Jaquar, MARC or Hindware complete all as specific and directed. Make Raj Shree Plastic wood/Sintex/Archid Plywood/ Kumar Arch Tech Ltd, Eco Cell.

S&F in repairs to Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 oto 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. complete all as specified and directed by Engr-in-Charge.

S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillet of width 35 mm for wall panelling with suitable distance and frame vertically and horizontally as per specification and drawing in any position with screws complete and as directed by Engineer-in-Charge

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed.

M&L for coloured vitrified tiles of any design and pattern, 600x600x9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption between 0.08% to 3%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects Complete all as specified and directed. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I)

M&L for Non- skid coloured ceramic tiles of any design and pattern, 300X300X7 to 8 mm thick, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles.Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE

M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles . Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I)

Demolition of Stone slabs and tiles of any description or thickness in floors, approns, kitchen plateform / shelves etc.Complete all as specified and directed

M&L for Machine cut pre polished kota stone slab flooring 18-20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete (Screed bed shall be paid seperately) complete all as specified and directed by Engr-in-Charge.

M&L for 10-12 mm thick machine cut pre polished kota stone slab in riser of steps, skirting,dado and pillar laid over cement screed base laid and jointed with grewy cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete all as specified and directed by Engr-in-Charge.

M&L for screed bed or bedding layer of morter 20 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles / kota stone complete all as specified and directed by Engr-in-Charge.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including ointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

M&L for 18-20 mm thick pre polished udaipur green stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed by Engr-in-Charge.

Rubbing and mirror polishing to old kota stone flooring to give high gloss finish complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, except brick work complete all as specified and directed and as approved by GE

Taking down cement plaster in any thickness from brick or stone walls , ceiling, facia etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed.

Supply only SBR Latex liquid polymer of approved make complete all as specified and directed (WPC shall be paid seperately)

M&L for rendering 15 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:6 finished to even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or plastered or unplastered and applying two coat of distemper acrylic oil emulsion white or tinted over and incl of one coat of alkali resistance priming paint and 1mm thick wall care putty on wall surface.complete all as specified and directed by Engr-in-Charge.

M&L preparation of old plastered or unplastered and applying two coat of distemper acrylic emulsion white or tinted over and incl of one coat of alkali resistance priming paint and 1mm thick wall care putty on wall surface.Complete all as specified and directed

M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint over a coat of alkali resitant prime complete all as specified and directed.

M&L for applying two finshing coat of cement based paint over a coat of alkali resitant primer including Prepraing surface of old surface with complete removel of existing treatment complete all as specified and as directed by Engr-in-charge.

Dismantaling RCC /PVC water tanks and S&F new rotational moulded polyethylene water storage tank 1000 liters capacity, double layer (ISI Marked) construction (cylindrical vertical closed top), hoisted & fixed in position including S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule complete all as specified and as directed.

Dismantaling RCC /PVC water tanks and S&F new rotational moulded polyethylene water storage tank 500 liters capacity, double layer (ISI Marked) construction (cylindrical vertical closed top), hoisted & fixed in position including S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia complete all as specified and directed by Engr-in-Charge.

M&L for Mild steel galvanized steel tubing of 20 mm bore (ISI Marked) with screwed socket joints, medium grade, together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed by Engr-in-Charge.

M&L for cutting chases on brick or concrete surface for concealed water tubing or / similar work of girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed by Engr-in-Charge.

M&L for Mild steel galvanized steel tubing of 15 mm bore (ISI Marked) with screwed socket joints as in concealed pipe work , medium grade, together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F bib taps 15mm bore of standard PTMT any colour ahigh pressure screwed for iron pipe and fixed in repair (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed by Engr-in-Charge.

S&F pillar taps 15mm bore of standard PTMT any colour ahigh pressure screwed for iron pipe and fixed in repair (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including on the roof top/mumty/parapet/RCC chajjas/RCC water tank and removal of debris and rubbish out side MoD land complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed by Engr-in-Charge.

Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick, rough finished flat surface of concrete complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914 mm x 460 x 203 and bowl size 405mm x 354 mm x 203mm.Make - Blue Star Silver Shine Cat No- SSSBSD-52, Nirali (Elegance NG) Small &Prayag Cat Part No. 1239 D

S&F in repairs Sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 560 mm x 460 x 203 and bowl size 510mm x 405 mm x 203mm. Make - Prayag Cat Part No. 1222D and equivalent to Blue Star Silver Shine, Nirali (Elegance NG)

S&F in repair stainless steel kitchen plate rack 0.80mm thick sheet of over all size 31" x 30" x 10" fixed with steel screws and steel rawal plugs complete all as specified and directed by Engr-in-Charge. Make – Prayag Cat Part No- P 346 , Blue star silver shine Cat No-SSKPR-314 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F in repairs 15 mm bore Stop valves (angular stop cock), cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle or concealed screwed both ends for iron pipe or for unions.complete all as specified and directed by Engr-in-Charge. Make – Jaquar Cat No-MQT-526NKN, Hindware cat No-F200005 ,Prayag Cat No-6510 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S&F in repairs Stop angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete (fixed in repairs) .“Make – Jaquar Cat No-MQT-514AKN, Hindware cat No-F200007 ,Prayag Cat No-6518 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

S&F in repairs 15 mm bore chromium plated bib taps long body, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. complete all as specified and directed by Engr-in-Charge. Make – Jaquar Cat No-MQT-512KN, Hindware cat No-F200001 ,Prayag Cat No-6502 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and directed by Engr-in-Charge. Make – Jaquar Cat No-MQT-508KN, Hindware cat No-F200011 ,Prayag Cat No-6509 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

S&F in repairs towel Rail 600 mm long fixedwith and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms)“ complete all as specified and directed by Engr-in-Charge. Make – Jaquar Cat No-AEC 1111N, Hindware cat No-F880005 ,Prayag Cat No-BA-01 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge. “Make – Jaquar Cat No-EOS-542A, Hindware cat No-F160039 ,Prayag Cat No-BOS-92 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

S&F in repair, Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long.complete all as specified and directed by Engr-in-Charge. Make – Jaquar Cat No-ACN1171N, CERA cat No-F5005301 ,Prayag Cat No-BEA-45

S&F in repair to glass corner shelf of size 300mm fixed with chromium plated brass brackets complete all as specified and directed.Make – Jaquar Cat No-ACN1173, CERA cat No-F505101 ,Prayag Cat No-BEA-44

S&F in repair for PVC Connections 15mm size with PTMT nuts of length 600 mm. complete all as specified and directed by Engr-in-Charge.

S&F in repair Wash basins (Padestal pattern) 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fitting complete all as specified and directed by Engr-in-Charge. Make - Jaquar Cat No-ECS-WHT-801 (WHB) & ECS-WHT-301(PEDESTAL), Hindware Cat No-Mario 10087 (WHB) & 11003(PEDESTAL) ,Cera Cat No-S2040120(WHB) & S2090113(PEDESTAL

S&F in repairs for Grating ,round 127 mm dia chromoum plated complete as specified and directed by Engr-in-Charge.Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for IWC of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make Sleek fresh dual flush of Hindware Model No star white size 47.6x15.5x32 ,Parryware Cat No 8177*, Cera Cat No B1810110 .Complete all as specified and directed

S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor . complete all as specified and directed by Engr-in-Charge

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed.

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair. complete all as specified and directed by Engr-in-Charge. Make – Jaquar Cat No-MQT-516AKN, Hindware cat No-F200014 ,Prayag Cat No-6550 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site . .

S&F in repair wall mixer with L Bend for over head shower incl Shower rose of size 125 mm and shower arm chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed. Make – Jaquar Cat No-MQT-517BKN(wall mixer) , EOS-542A(Shower) & ALE-536A(Shower arm, Hindware cat No-F200020 (wall mixer) & F160120 (shower with arm) , Prayag Cat No-6575 (wall mixer),& BS-36(Shower with arm) Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site.

S&F in repair brass chromium plated towel rack of size 600 mm fixed with and including CP brass screws and wooden/plastic cleats, complete all as specified and directed Make – Jaquar Cat No-ACN -1181N ,Hindware Cat No-F880008, Parryware Cat No T6008A1, Cera Cat No F5003102 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site

S&F in repairs Health Faucet with hose & hook (complete set) fixed to angle / stop cock 15 mm dia complete all as specified and directed by Engr-in-Charge. Make – Jaquar Cat No- ALD 573 ,Hindware Cat No F160068, Parryware Cat No T9961A1 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site complete all as specified and directed by Engr-in-Charge.

S&F in repairs toilet paper holder chromium plated fixed to wall with chromium plated (CP) brass screws Make – Jaquar Cat No- ACN-1153N ,Hindware model No F 880003, Parryware model No T6514A1 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site complete as directed as site by Engr-in-Charge.

S&F in repair to chromium plated towel ring of Make – Jaquar Cat part no AEC-1121N , Hindware cat No-F880007, &Prayag Cat No-BA 02 Note- Chromium plated fitting shall be brought in store yard first as approved by GE/AGE(I) and will be issued subsequently for fixing at site .

S&F repair 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kg f per Cm Cm Square fixed to walls, ceilings or in floors etc complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified & as directed.

S&F to 18 mm thick solid WPC board both side prelam for cabinet boxes & shutter , cup boards, drawer, etc with shelf and shutter incl lipping to edges of exposed surface incl provn of fixing arrangement.Complete all as specified and directed

S&F of Heavy Duty, statinless steel non megnetic , ball bearing telescopic channel of 20-22 inch of superior quality as approved by AGE(I). make – Hettich, Godrej or equivalent complete all as specified and directed.

S&F to Auto closing hinges 35 mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet & ward robe shutters complete in all respect and fixed in position all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) incl close seat cover, hinges,fixing accessories and accessories set and cistern with cistern fitting complete, flush pipe incl all joints Make – Jaquar Cat No-AIS-WHT-101751S220SPPSMZ, Hindware Cat No-20101(S-22) (EWC) & 21054 (Cistern) Cera Cat No-S1013136

TARUN ENGINEERING WORKS

SWASTIKA BUILDERS

VASHU CONSTRUCTION Co.