S.R. To Assistant Research Officer, Geri Building at Junagadh (Repairing & Additional work of M.T. Lab, Other Sanitory work)

Name of work : S.R To Assistant Research Officer, GERI Building At Junagadh (Repairing And Additional Work for MT Lab,Other

Sanatory Work )

Quantities Tendered Rate Total amount

Quantities Tendered Rate Total amount

Estimated according to

but may be Description of Item Unit estimated

No. in figure in word

more or less quantites

1 12.00 Demolition of Brick work and stone masonry including 562.89 Rupees Five Hundred Sixty Two Cum

stacking of serviceable materilas and disposal of and Paise Eighty Nine Only

unserviceable materials with all lead and lift.(ii) In Cement

2 50.00 Excavation for foundation upto 1.5 m depth including sorting 268.92 Rupees Two Hundred Sixty Eight Cum

out and stacking of useful materials and disposing off the and Paise Ninety Two Only

excavated stuff upto 50 Meter lead.(C) Hard Murrum

3 11.00 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 3805.29 Rupees Three Thousand Eight Cum

Coarse sand : 4- Crushed stone aggregates 20 mm Hundred Five and Paise Twenty

nominal size) and curing complete excluding cost of Nine Only

formwork in (A) Foundation and Plinth

4 28.00 White stone bela masonry block in course in Foundation & 6157.98 Rupees Six Thousand One Hundred Cum

Plinth with stone of approved quality in cement mortar 1:5 Fifty Seven and Paise Ninety Eight

(1cement : 5 course sand) including racking the joints etc. Only

5 3.00 Providing and laying cement concrete 1:3:6 (1- Cement : 3- 4152.60 Rupees Four Thousand One Cum

Coarse sand : 6- crushed stone aggregates 20 mm nominal Hundred Fifty Two and Paise Sixty

size) and curing complete including cost of formwork in (A) Only

Wall Caps / Coping

6 34.00 Filling in foundation and plinth with murrum or selected soil 301.78 Rupees Three Hundred One and Cum

in layers of 20cm. thickness including watering, ramming Paise Seventy Eight Only

and consolidating etc. complete.

7 26.00 White Stone Bela mesonry block in course in superstructure 6507.95 Rupees Six Thousand Five Cum

with stone of approved quality in Cement Mortar 1:5 (1- Hundred Seven and Paise Ninety

Cement :5- course sand) including packing the joints etc. Five Only

8 24.00 Providing and laying ordinary cement concrete 1:2:4 7454.03 Rupees Seven Thousand Four Cum

(1Cement 2- coarse sand : 4- graded stone aggregates 20 Hundred Fifty Four and Paise Three

mm nominal size) exposed work with curing etc. complete Only

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than

10 cm and upto 13 cm. thickness

9 191.00 Providing 10 mm thick plaster on brick/ concrete walls for 222.33 Rupees Two Hundred Twenty Two Sqm

interior plastering and finished even and smooth in cement and Paise Thirty Three Only

mortar 1:3 (1 cement : 3 sand) and finishing with a floating

coat of neat cement slurry and watering, curing etc.

10 109.00 Providing 15 mm thick plaster on brick/ concrete walls for 246.05 Rupees Two Hundred Forty Six and Sqm

interior plastering and finished even and smooth in cement Paise Five Only

mortar 1:3 (1 cement : 3 sand) and finishing with a floating

coat of neat cement slurry and watering, curing etc.

11 138.00 20mm thick sand faced cement plaster with Gutka on walls 342.41 Rupees Three Hundred Forty Two Sqm

upto height 10 meters above ground level consisting of and Paise Forty One Only

12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand)

and 8mm thick finishing coat of C.M. 1:1 (1cement :1 sand)

etc. complete .

12 110.00 Providing and laying polished Kota stone slab flooring over 1019.39 Rupees One Thousand Nineteen Sqm

20mm (Average) thick base of cement mortar 1:6 (1-cement and Paise Thirty Nine Only

: 6-coarse sand) or C.M. 1.1.5 (1-Cement :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

13 204.00 Providing and laying broken chine mosaic flooring for 1118.78 Rupees One Thousand One Sqm

terrace using 12 mm to 20 mm broken pieces of glazed tiles Hundred Eighteen and Paise

to be laid over cement mortar 1:3 to plain or slope and to be Seventy Eight Only

tempered to bring mortar crème out upto surface using white

cement including rounding of junctions and extending them

upto 15 cm along the wall, clearing with water and oxalic

acid etc. as directed on 50 mm thick CC 1:2:4 concrete

14 3054.00 Steel work, welded in built up sections framed work 91.08 Rupees Ninety One and Paise Eight Kg

including cutting, hoisting, fixing in position and applying a Only

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

15 102.00 Providing corrugated G.I. sheet of class-3 roofing fixed with 734.19 Rupees Seven Hundred Thirty Four Sqm

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter and Paise Nineteen Only

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

16 117.00 Pro. And fixing single layer water proof gypsum board 12.5 606.95 Rupees Six Hundred Six and Paise Sqm

mm thick sections using water proof board of size 1220 mm Ninety Five Only

x 1830 mm x 8.0 mm suspended by GI suspender channel

of size 25 mm x 3 mm with intermediate channel og size

mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling

section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm x

0.5 mm at edges & drops incl.paper tap sand sofit cleat,

anchor fastener, scoch bolt connecting cleat,joining

compound top coat on ceiling incl.making necy.opening for

light fitting,diffuser etc. comp. as per detail drawing as

17 300.00 Applying two coats of putty & two coats of primer of 40.59 Rupees Forty and Paise Fifty Nine Sqm

approved brand and manufacture on new wall surface to Only

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

18 300.00 Wall & Ceiling painting (three coats) with plastic emulsion 125.40 Rupees One Hundred Twenty Five Sqm

paint of approved brand and manufacture on undecorated and Paise Forty Only

wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

19 138.00 Finishing wall with weather proof exterior emulsion paint on 120.26 Rupees One Hundred Twenty and Sqm

wall surface (two coats) to give an required shape even Paise Twenty Six Only

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

20 49.00 Providing and fixing machine cut, free edges, pre mirror 2579.54 Rupees Two Thousand Five Sqm

polished Granite stone slab 18 mm thick (single piece not Hundred Seventy Nine and Paise

less than 150 cm ) for vertical wall/Doors/Windows Sill,Jams Fifty Four Only

for cladding as per design including full moulded round

inside edge and laid on 10 mm thick cement mortar 1:3 (

cement: 3 coarse sand) jointed with grey cement slurry

including rubbing and polishing finishing etc. complete.

21 9.00 Providing and fixing window having extruded aluminum 1583.95 Rupees One Thousand Five Sqm

Colour anodized section frame main outer size 95mm x Hundred Eighty Three and Paise

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three Ninety Five Only

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc

22 225.00 Providing and fixing M.S.Grills of required pattern with 111.10 Rupees One Hundred Eleven and Kg

M.S.Flats at required spacings and frame alround,square or Paise Ten Only

round bar,with round headed bolts and nuts or by screws

plain grill including approval quality of primer and two coat

of oil painting etc.

23 4.00 Providing & fixing Double shutter pivoted door without 6205.44 Rupees Six Thousand Two Sqm

frame .The shutter shall be made of 35 x 100 mm , 5 mm Hundred Five and Paise Forty Four

thick M.S. Hollow frame work all around and having 25 mm Only

x 25 mm, 4 mm thick MS square pipe bends at equal

distance through out the height of the shutter with

mm Flush Door both side laminated and edge beading .

The colour , pattern and design to be approved by Engineer -

in - charge. this also includes necessary SS fixtures and

fittings like Pivot, pull handels , tower bolts , Hinges , locking

arrangements etc complete as directed by Engineer in

24 2000.00 Providing erecting and fixing double coated ISI water tank of 3.95 Rupees Three and Paise Ninety Liter

required capacity each with all necessary fittings and Five Only

connection etc. complete on terrace

25 5.00 Providing and fixing screw down bib taps of following 177.85 Rupees One Hundred Seventy No

size.(C) Gun metal screw down bib tap. (ii) 20mm dia. Seven and Paise Eighty Five Only

26 5.00 Providing and fixing pillar tap, capstan head, screw down 354.69 Rupees Three Hundred Fifty Four No

high pressure with screws, shanks and back nuts.(ii) 20mm and Paise Sixty Nine Only

27 5.00 Providing and fixing brass screw down stop tap.(B) 20mm 223.81 Rupees Two Hundred Twenty Three No

dia. and Paise Eighty One Only

28 5.00 Providing and fixing PVC SWR Nahni trap IS 14735 for 574.58 Rupees Five Hundred Seventy Four No

drain - 75 mm diameter with jali of the following nominal and Paise Fifty Eight Only

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

29 30.00 Providing laying and jointing in true line and level 50mm dia. 195.67 Rupees One Hundred Ninety Five Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as and Paise Sixty Seven Only

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

30 50.00 Providing laying and jointing in true line and level 40mm dia. 148.12 Rupees One Hundred Forty Eight Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as and Paise Twelve Only

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

31 90.00 Providing laying and jointing in true line and level 25mm dia. 91.84 Rupees Ninety One and Paise Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings Eighty Four Only

make or equivalent as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including

cost of all materials.

32 100.00 Providing laying and jointing in true line and level 15mm dia. 72.65 Rupees Seventy Two and Paise Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as Sixty Five Only

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

33 5.00 Providing and fixing glazed Soap dish by engraving in wall 151.50 Rupees One Hundred Fifty One and No

and fixing as directed. Paise Fifty Only

34 5.00 Providing and fixing C.P.Brass towel rail grab bar complete 616.42 Rupees Six Hundred Sixteen and No

withC.P.Brass brackets fixed to woodenplugs with c.p.brass Paise Forty Two Only

screws.(B) 600 mm x 20 mm size.

35 5.00 Providing and fixing 600mm x 450mm bevelled edge mirrror 859.41 Rupees Eight Hundred Fifty Nine No

of superior glass mounted on 6mm thick A.C. sheet or and Paise Forty One Only

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

36 3.00 Constructing brick masonary chamber for under ground 2932.93 Rupees Two Thousand Nine Each

C.I.inspection chamber and bends with bricks having Hundred Thirty Two and Paise

crushing strength not less than35 kg/sq.cm in C.M.1:5 Ninety Three Only

C.I.cover with frame ( light duty) 455 mm x 610 mm internal

dimension total weight of cover with frame to be not less

than 38 kgs.(weight of cover 23 kg and wt.of frame

kg)R.C.C.top slab with 1:2:4 mix ( 1 cement:2 coarse sand:4

graded stone aggregates 20 mm size) foundationconcrete

1:5:10 inside plaster 15 mm thick cement mortar 1:3 finished

smooth with a floating coat of neat cement on wall and bed

concrete etc complete.(I) Inside dimensions 455 mm x

mm and 450 mm deep for single pipe line.

37 4.00 Providing and fixing Kitchen sink with C.I. or M.S. brackets, 2326.66 Rupees Two Thousand Three No

painted white including cutting holes in walls and making Hundred Twenty Six and Paise

good the same but excluding fittings. (C) Vitreous China Sixty Six Only

Sink.(i) 600mm x 450mm x 150mm size

38 2.00 Providing and fixing Vitreous china flat back 550mm. x 2104.39 Rupees Two Thousand One No

400mm. size wash basin with C.I. or M.S. brakets painted Hundred Four and Paise Thirty Nine

white including cutting holes in walls and making good the Only

same,including necessary fittings, PVC waste pipe, rubber

plug, C.P. brass waste, couplings fisher union, stop cock

and necessary PVC connection etc complete and as

39 2.00 Providing and fixing Urinal of approved quality including 1631.88 Rupees One Thousand Six Hundred No

connection with trap and with integral longitudinal flush Thirty One and Paise Eighty Eight

pipe.(A) Squating plate pattern white earthenware 550mm Only

40 5.00 Providing and fixing Gun metal check or non-return fullway 420.63 Rupees Four Hundred Twenty and Rmt

wheel valve.(C) 25mm dia. Paise Sixty Three Only

41 2.00 Providing and fixing retro Reflective Engineering grade 11887.44 Rupees Eleven Thousand Eight Sqm

Board using C.R.C. (M.S.) Sheet 2mm, angle iron 75 x 75 x Hundred Eighty Seven and Paise

6mm. Descaling and degreasing the board as per Forty Four Only

requirement using epoxyprimer epoxy paint and carrying

retro reflactive process by screen painting as directed etc.

complete including transporting and fixing in C.C. 1:4:8 with

necessary excavation curing etc. complete as per I.R.C type

design.(A) Engineer Grade

42 3.00 Providing & fixing color anodized aluminum Partition section 3182.51 Rupees Three Thousand One Sqm

63.50x38.10x1.95 mm Section No : 4605, @ Wt Hundred Eighty Two and Paise Fifty

1.094Kg/Rmt with colour anodized alluminium frame with 8 One Only

mm thick transparent bronze colour tinted float glass and

mm thk. navopan 3 layer malamine face prelaminated board

of approved make like 'BOARD OR 'BISON ANNEL OR

equivalent etc complete as directed by Engineer In Charge.

43 2880.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work 77.29 Rupees Seventy Seven and Paise Kg

including bending, binding and placing in position complete Twenty Nine Only

upto floor two level

( Total Rupees Twenty Lakh Seventy Eight Thousand Two Hundred Twenty Five and Paise Eighty Six Only.)

I/We am/are willing to carry out the work at………% above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our tender works out as under

Estimated amount put to tender Estimated amount put to tender

Deduct :………% below Deduct :………% below

In words : In words :

(1). The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In Charge for which no extra

payment shall be made.

(2). The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3).GST and Income tax TDS will be deducted at a source while making payments of bills

(4).In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

(5). GST will be paid extra as per Govt. amendment.

Signature of Bidder

Executive Engineer