PROVN OF UG SUMP, SEWAGE LINE IN AVN UNIT AND OTHER SANCTIONED WORKS UNDER GE MISAMARI

Amount

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. (Note:Demolished material to be used for filling under floors to bring upto required level, if neccesary)

Excavation over an areas n.exc. 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over an areas exc. 1.5m deep but not exc. 3.0m and getting out in soft/loose soil complete all as specified and as directed.

Surfaces excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Description all as per item No.72 above but depth exc. 1.5m and n. exc. 3m.,complete all as specified and as directed.

Excavating in post holes (or simlar holes) each n exc. 0.50 cm getting out returing filling in and ramming earth as broken rubble mixed with earth around in layers n exc. 25 cm watering & removing surplus soil to a distance n exc. 50 m and making good surface.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

All as per Item no.54 here in before but for 6mm to 8mm, complete all as specified and directed.

M&L Formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and as directed.

M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and as directed.

M&L Formwork to Soffits of suspended Slabs such as Roof Slabs, Floor Slabs, Landings and similar work; not exc. 200mm thick (horizontal or sloping), rough finished surfaces of Concrete, complete all as specified and as directed.

M&L for RCC M-30 with 20mm graded aggregate as in Walls, retaining walls, basement walls, ballast walls, baffle wall with liquid water proofing compound @ 0.20 ltr per bag of cement and PVC polyester fibre 125 gms per bag of cement and the like; any thickness; above top of footings; including attached pilaster and buttresses, complete all as specified and as directed. NOTE:- Water Proofing Compound (WPC) & Polyster fibre will be Measured and Paid separately under appropriate Item as 'Supply only'.

M&L Reinforced Cement Concrete M-30 (20mm graded aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and mass concrete with liquid water proofing compound @ 0.20 ltr per bag of cement and PVC polyster fibre 125gms per bag of cement, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) & Polyster fibre will be Measured and Paid separately under appropriate Item as 'Supply only'.

M&L for RCC M-30 Design mix as in slabs supported on walls/beams with liquid water proofing compound @ 0.20 ltr per bag of cement and PVC polyster fibre 125gms per bag of cement, complete all as specified and directed . NOTE:- Water Proofing Compound (WPC) & Polyster fibre will be Measured and Paid separately under appropriate Item as 'Supply only'.

M&L Hardcore of broken stone or boulders of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L Hardcore of broken stone or boulders of gauge exc. 63mm but not exc.100mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, C2 (40mm graded aggregate), 75mm thick as in Plinth Protection, etc.,finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

Supply only liquid Water Proofing Compound, conforming to IS-2465-1975 and/or as approved, complete all as specified and as directed.

Supply only polyester triangular fibres as secondary reinforcement in all types of concrete, complete all as specified and directed.

M&L Rendering 10mm thick on concrete Surfaces in Cement Mortar 1:4 surface finished even and smooth without using extra cement and liquid water proofing compound @ 0.20 ltr per bag of cement, complete all as specified and as directed. NOTE:- Water Proofing Compound (WPC) & Polyster fibre will be Measured and Paid separately under appropriate Item as 'Supply only'.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:3 on Brick Walls or Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 type C-2 (40mm graded aggregate) in wall or retaining wall, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and post(including caps and bases), etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L Cement Concrete 1:2:4 type B-2 (40mm graded aggregate) in wall or retaining wall, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and post(including caps and bases), etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L for PCC 1:3:6 type B-1 ( Using 20mm graded agg) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates concrete complete all as specified and directed.

M&L Cement Concrete 1:4:8, Type B2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Pre-cast Reinforced Cement Concrete (nominal mix) 1:2:4 type B1(20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:4 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.

Supplying, laying and testing of 200 mm internal dia of double wall corrugated (DWC) high density polyethylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for sewage line and laid in trenches as specified in IS-16098-2013 part-2 complete all as specified and as directed. Note :- Bedding of pipe shall not be provide in normal condition, but PCC bed blocks 200mm thick around the pipe shall be provided to hold the joints and mid part of the pipe. Rates of PCC bed block shall be deemed to be inclusive in the rate quoted by the contractor for DWC pipes.

M&L for 50mm thick Cement Concrete 1:3:6,type C-1 (20 mm graded aggregate) as in floors finishing Concrete Surfaces Even and smooth without using extra cement, complete all as specified and as directed.

M&L for plastic dividing strip, 1.5mm thick and 38mm width of strip, complete all as specified and as directed.

M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L preparing new of Walls and applying Two Coats of Cement Base Paint over a coat of cement primer, complete all as specified and as directed.

S & F Plates (plain or chequered) channels, square cut or notched(ordinary and counter) forming holes, with riveted bolted or welded attachment Fe-410(Gde-E-250), complete all as specified and directed.

S & F of mild steel scew bolts 5 to 10 mm (Machine made) with hexagonal or squre heads at one end and screwed the other , or screwed both ends, each screw end to be fitted with washers and one hexagonal or squre nut , exc 5 cm but not exc. 10cm long complete all as specified and directed.

M&L Vitreous china wash hand basin, white, (flat back or angle back) of size 400 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

S&F Stop Cock 15mm bore , Chromium Plated with long shank, fancy type, screwed down high pressure with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S & F 32 mm dia bore waste fitting brass chromium plated for glazes ware sink, basin etc. with long screwed shanks and fly- nut,flange end bedded in red led cement and other fixed , complete all as specified and directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 25mm bore (dia), galvanised, ‘medium grade’ with all Fittings and accessories, laid in trenches, under road, under floor or in air connection or any other situation, complete as all specified and as directed.

S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S & F 32 mm dia bore low density poly ethylene pipes(LDPE) of pressure rating 6 kg/ sq cm laid in trenches, complete all as specified and directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

Cutting of existing CI pipe laid 80 mm dia for inserting Tees for new connection of 25mm dia, complete all as specified and directed.

M&L for GI connection pieces for inserting 25 mm GI pipe into 80 mm distribution mains, complete all as specified and directed.

Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80mm x 63mm dia, complete all as specified and directed.

M&L for connection pieces for inserting 63 mm PPR pipe into 80 mm distribution mains, complete all as specified and directed.

M&L for connection of PP-R distribution branch with PP-R main of 63mm size by providing and fixing tee of 63mm x 32mm including cutting and making fusion joint etc., complete all as specified and directed.

Supply, installation ,testing and commissioning as in replacement of Single phase 2 wire 240 V 10-60A Class 1.0 Prepaid Meter as per IS 15884, frequency 50 Hz, Complying to IP51 with LCD Display ,KWH LED, encrypted STS based token system with Home display Unit complete alongwith parallel consumer interface unit and soft token transfer device at house , with facility of meter to generate ABC code(Authenticated Billing Code) for monthly Energy usage bill generation ,numeric keypad for token entry with LED for credit status indication, push button for scroll and having features for load disconnection in case the credit limit become zero or increase of load then permissible limit ,reconnection and disconnection of load, buzzer at Consumer interface unit to give alarm in case of low credit and overloading and data download port for last 25 days (minimum) , Relays provided for phase and neutral disconnection, programmable friendly hours/day, holidays, slab/time -of-day tariff structure,optional consumer interface unit (CIU) available with USB dongle token carrier for recharging,temper event and load survey for last 45 days with all standard anti temper features, complete all as specified and as directed. Model :- Taurus, Make L&T Meters, and equivalent in ABB,Secure and Genus

Supply,Installation commissioning and implementation of vending system through server including required Online Vending Software,with dedicated login along with Training and Demonstration and supply of connection cable for connecting Meter with Home display Unit, date base defining, mapping of consumers and running the vending system for each meter for lifetime validity and training users alongwith user manual for one year, complete all as specified and as directed.

Supply and installation of PC/Laptop with window 10 or above OS with minimum 4 GB RAM and 500 GB Hard -Disk, complete all as specified and as directed.

Supply and installation of Digital Printer for printing the Recharge tokens, complete all as specified and as directed.

M&L for Sub main wiring 2x 6 Sqmm multi-strand PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles, complete all as specified and as directed.

S&F Polycarbonate Meter enclosure for enclosing Single phase prepaid meter as mentioned in item No 1, complete all as specified and as directed.

Transaction/Vending chages inclusive of maintenance & service for one year.Note: MoU between MES and OEM through contractor for subsequent year transaction charges for at least 08 years would be submitted . First year charges should be same with subsequent year transaction charges w.r.t item no 1, complete all as specified and as directed.

Supply, laying and testing and commissioning of 5 HP Pumping sets of discharge 660 LPM head 22 mtr centrifugal monoblock electric driven 3 phase, inclusive of pcc fondation and covered shed, complete all as specified and as directed.

Boaring holes horizontally under road without damaging the surface of Road ( minimum 1.0 mtr below the road surface with the help of GI tubing not exc. 80 mm bore ( dia) for passing of supply pipeline, complete all as specified and as directed. NOTE:- GI pipe laid will be measured and paid seperately under appropiate item.

Cutting existing GI/carst Iron/Ductile Iron/PPR pipe up to 100 mm, for insertion of PPR Tee 90x90x90 mm complete all as specified and directed

S & F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property )fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 90 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-16 , SDR-7.4, complete all as specified and as directed.

S&F PP-R gate valve (Brass insert) 32mm outer dia and fixed including taking down of existing unserviceable one, complete all as specified and directed.

S&F PP-R gate valve (Brass insert) 63mm outer dia and fixed including taking down of existing unserviceable one, complete all as specified and directed.

S & F Cast Iron NRV 80 mm bore ( dia) complying with IS: 14846-2000, class PN 1.6 Both Engs Flanged with 2 No. Rubber insertion gasket joints, bolts, Nuts and Washers of required size and Nos, complete all as specified and as directed.

M&L Cast Iron Sluice Valve 80mm bore (dia), comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed.

S & F cast iron 80 mm foot valve flanged end swinging type operation with rubber seat conforming with IS: 4038 complete all as specified and as directed

Supply and laying GI pipe of 80 mm dia , medium grade incl all necessary fitting, excavation and joining complete all as specified and directed.

S & F gun metal gate or globe valve , 25 mm dia with iron wheel head , screwed both end for iron pipe complete all as specified and as directed

Supply, Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 90 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make :- SFMC or equivalent of PRINCE/FINOLEX/FUSION

Supply, Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 63 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed.Make :- SFMC or equivalent of PRINCE/FINOLEX/FUSION

Supply, Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 50 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make :- SFMC or equivalent of PRINCE/FINOLEX/FUSION

Supply, Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 32 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed.Make :- SFMC or equivalent of PRINCE/FINOLEX/FUSION

Supply, Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 25 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed.Make :- SFMC or equivalent of PRINCE/FINOLEX/FUSION

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 10 Sqmm 4.0 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

M & L Fully Automatic Star Delta starter suitable for 7.5 HP, 13-22 A Motor In Sheet Metal Enclosure with single Phase Protection feature ( Motor Rating AC-3 Duty, 415 Volts, 50 Hz , 3 Phase complete with Timer, suitable cap relay including dismantling unserviceable starter , complete all as specified and as directed.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after lay-ing the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE: For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for payment.

S&F Sub-Class ‘B’ Brick, well burnt, laid breadthwise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L Construction Brick Masonry Valve Pit of size 450x450x450 mm (Internal Dimension) one Brick thick Wall in Cement Mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggre-gate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame alround including provision of Hinges, Handle with Locking Arrangement and 40x40x6mm Angle Iron Frame fixed on top of Valve Pit by means of holdfast 150mm long, embedd -ed in PCC 1:2:4 (20mm graded aggregate) Block of size 230x200x100 mm, applying two coats of Anti-corrosive Paint to all exposed Steel Surfaces over a coat of red oxide zinc chrome Primer after preparation of Surfaces and necessary Earth Work in Soft/ Loose Soil including demolition of unserviceable Valve Pit, complete all as specified and as directed.

M&L construction of brick masonry valve pit, one brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in foundation, rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS sheet valve pit cover, welded with 40x5mm flat iron frame alround including provision of hinges, handle and locking arrangement and 40x40x6 mm angle iron frame fixed on top of valve pit by means of holdfast 150mm long, embedded in PCC 1:2:4(20mm graded aggregate) block of size 230x200x100mm, applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer after preparation of all exposed to steel surfaces including necessary earth work in soft/loose soil and demolition of old unserviceable valve pit of size 750x750x900mm (internal diamension), complete all as specified and directed.

M&L Earthing with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 6.0 mm dia by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc 150mm thick PCC Pit in Cement Concrete 1:3:6 (20 mm graded aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on completion, complete all as specified and as directed.

Markson

M/S KAMAKHYA CONSTRUCTION AND BUILDERS

M/S SR BUILDERS