09 /WBMAD/SMC/P and G/2025-2026

Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. .

(a) Depth of excavation not exceeding 1.500 mm.

Laying 150 mm. to 200 mm. boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling but including ramming.

Cost of stone boulder 150 mm size delivered ans stacked at site.

(II) Cement concrete with 30 mm. down graded shingles excluding shuttering.N.B. VarietyIn ground floor .

(a) 1:3:6 proportion.

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant codes.

(ii) River bazree.

Hire and labour charge for shuttering with centreing and necessary staging up to 4 m. using approved stout props and thick hard wood planks of approved thick ness with required bracing for concrete slabs, beams, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (up to roof of ground floor).

(f) 25mm. To 30mm. Shuttering with out staging in foundation etc.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.

(a) For works in foundation, basement and up to roof of ground floor/up to 4m. Tor steel/Mild steel.

SAIL/ TATA/RINL

M.S. gate of jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round/square bars or angles. M.S. sheet (not less than 14 gauge). Gussets. Cleats etc. including necessary riveting . Bolting. Welding,locking and hanging arrangements fitting and fixing complete as per direction of the Engineer-in-charge. In ground floor. .

(a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor up to 4th floor and @1.25% for each addl. floor above 4th floor).

(ii) Grill weighing above 16 kg./sq.m.and above .

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface].

(ii) With 1:4 cement mortar .

(b) 15 mm. thick plaster.

Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.

(b) Priming one coat on timber or plastered surface with synthetic enamel oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.

(a) On timber or plastered surface: .

(1) With super gloss (hi-gloss).

(iv) Two coats (with any shade except white).

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.

(b) On steel or other metal surface: .

(1) With super gloss (hi-gloss).

(iv) Two coats (with any shade except white).

Direction and Place Identification Signs with size more than 0.9 sqm size Board.Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3,fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)..

Supplying and Installation of Pre-Cast Concrete Garden Chair: Banch/Chair made of pre-cast Concrete with concrete planks. L=4.5'

Dismantling all type of plain cement concrete works, stacking serviceable materrials at site and removing rubbish as directed with in a lead of 75 m In ground floor including roof.

(a) upto 150 mm. thick.

Supplying, fitting and fixing Play Equipments: MINI HUT WITH SLIDE: Slide chute length:8',Hut & Slide Made of 8mm thick FRP sheet, Supports made of 63NB GI pipes, Ladder made of 3""x1" square MS pipes, Handles made 18NB GI pipes, Canopy size:3'6"x3'6"

Supplying, fitting and fixing Play Equipments: DOUBLE SWING: Dimension:10'x6'x8'(Ht.), Legs and crossbar constructed of 50NB GI pipes, 6mm rubber coated chains. Seats made of FRP with MS reinforcement. Finished with Asian Paints PU coating.

Supplying, fitting and fixing Play Equipments: MERRY GO ROUND: 4 Seater, Size:Diameter:5', Main pipe 75NB GI pipe, Supporting pipes 40NB GI, Handle 18NB GI, Seats:12"x10" made of FRP, PU paint

Supplying, fitting and fixing Play Equipments: DOUBLE SEE-SAW: Size: 4'x10'. Made of 50NB GI pipes and 18NB GI pipes for handle and leg rest. Seates made of FRP of size 10''x7'' each fitted with 6" spring at the bottom of seat for easy bounce back. Finished with PU paint

Supplying, fitting and fixing : MODEL DUST BIN: Made of FRP. Height:3' and dia.18". Finished with synthetic enamel paint.

Supplying, fitting and fixing Play Equipments: ROCKING HORSE: Size 2'x4', Made of 50NB GI pipes and 18NB GI pipes for handle and leg rest. Two Seates made of FRP. Finished with PU paint

Supplying and Planting of different plant /trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc.

vi) Duranta healthy plant of big size

Supplying and Planting of different plant /trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc.

xxvi) Areca Palm 4 - 5 suckers of height 90cm to 105 cm in earthen pots of size 25 cm.

Supplying and Planting of different plant /trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc.

xix) Bougainvillea (name variety, bushy plants, full bloom) of height 90cm-60cm incement pots of size 30cm.

Supplying and Planting of different plant /trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc.

iv) Rangon hi-breed healthy plant.

Supplying and Planting of different plant /trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc.

xxi) Croton different varieties of height 30 cm to 90 cm in earthen pots of size 25cm.

Supplying and stacking sludge (adequate for Horticulture work) at site in dry cake from approved disposal work site including royalty, all lead and lift etc. (Sludge measured in stack will be reduced by 8%).

Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete .(payment to be made on the basis of measurement of finished quantity of work).

(iii) With carried earth arranged by the contractor with in a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.

Supplying and laying in the specified pattern of interlocking concrete block pavements (ICBP) with concrete blocks (with concrete grade as specified as per Table I of IS 156858: 2006) manufactured in steel mounld clamped to a vibrating table by hydraulic presure (as per cl. No 6.30 of IRC SP 63(2018) from BIS licencee manufacturer with specer nob (small petroding profiles on the verticle face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per CI No. 3.26 of IS 15658) and of specified size and shape with as (the ratio of lenth to the thickness of paver block as per CL No. 3.3 IS 15658) as per Table 2 of IS :15658 with flexural strength and breaking load as per annexure G of of IS 15658 on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in the design and drawing with a cushion oa compacted bedding sand of 25-35 mm thick (grading of bedding sand as per clause 6.5.1 of IRC SP-grading of t

Providing and fixing at or near ground level precast cement concrete in kerbs (size: 410 mm x 310 mm x width 150 mm at bottom with circular nosing at top) (Nano kerb) of cement concrete M25 Grade without reinforcement, fixing as per approved pattern and setting in position at site after pre paringthe bed grade and slopes by laying cement concrete with jhamakhoa (1:4:8) as per specification and direction of Engineer-in-Charge including filling of joints with 10 mm thick cement mortar (3:1) and back filling the vertical piece properly with earth duly compacted and curing the mortar joints for atleast 3days including cost and carriage of all materials complete..

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns,wall, facia,rise etc. with 15 mm thick [avg] cement mortar(1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing incement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing androughening of concrete surface complete.[Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]In ground floor

(a) Area of each Granite slab 0.6 to 1.0 Square meter.

% Contigency

Please Enable Macros to View BoQ information