PROVN OF TRG STORE WITH PCC FLOORING NEAR OR LINE IN BLDG NO-01 (OTM) AT MH LANSDOWNE

Amount

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil. Complete all as specified and directed.

Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil Complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete Complete all as specified and directed.

Returning filling in incl spreading leveling watering and well ramming in layers n.exc 25 cm in thickness complete all as specified and directed.

Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for RCC Type A1 1:1.5:3 using 20mm graded aggregate as in footings fdn beams etc complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in columns complete all as specified and directed.

All as per Item No 07 here in above but in beams and lintels complete all as specified and directed.

M&L for form work to sides of footing and plinth beams finished fair and rough complete all as specified and directed.

All as per Item No 09 here in above but for columns complete all as specified and directed.

All as per Item No 09 here in above but for sides and soffits of beams and lintels complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item No 12 here in above but 6mm to 8mm dia complete all as specified and directed.

M&L for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8) type D2 (40 mm graded aggregate) as in sub base complete all as specified and directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F framed brackets of angles or Tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc n.exc 10 kg each brackets, conforming Fe- 290. Gde -E-165 (brackets over 10 kg each to be measured under structural steel complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cmwidth or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating AZ-150 GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for brick work with sub class B bricks old size , straight or curved on plan exc 6 m mean radius , built in cement mortor 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping complete all as specified and as directed.

M & L for providing 75 mm thick cement concrete (1:3:6) Nominal Mix (using 40 mm grade stone aggregate) as in plinth protection/ hard standing finished even and fair, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for preparation of new plastered or un- plastered surfaces of wall including cornices, pilasters etc and applying Three Coats of white wash complete all as specified and directed.

M&L preparing of new plastered surface of walls and applying two coats of cement base paint, over chalk whitening complete all as specified and directed.

S & F Plain, framed, panelled shutters 35mm thick in II class hard wood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted.

M & F for factory made steel windows with side hung shutters including projecting type hinges , steel handle , and steel peg stay , complete with glazing bars , dovetailed or welded complete all as specified and diected.

S & F for mild steel chowkats of angle of Gde Fe 290 Gde E -165 complete all as specified and directed.

S & F small articles of steel such as hold fasts, etc. of Gde Fe 410-O or Fe 310-O complete all as specified and directed.

S&F hand rail, Window guard bars,post and strut in fencing flat iron fillets incl all necessary drilling bolting riveting etc similar work confirming to Fe 290 Gde E-165 complete

S & F of 125 mm long (Length of bolt) mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 125 mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

M&L for 20-25 mm thick kota stone (machine cut) slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing complete all as specified and directed.

M&L screed bed or bedding layer 15 mm thick mortar in CM 1:6 finished even and smooth for laying floor finishes complete all as specified and directed

Material & Labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat to receive wall tiles/kota stone etc complete all as specified and directed.

S & F of 250 mm long (Length of bolt) mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

M&L for point wiring concealed type upto wall height and open with conduit after wall height with 1.5sq mm PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl PVC rigid conduit not less than 20mm dia with its accessories with provn of CI/pressed steel terminal switch box and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc for the following (Make of Cable : Finolex/RR Cable/Havells & Make for Conduit : AKG/PRESTOPLAST/PRECISION ): - (a) One light/fan/bell point controlled by one No piano type switch 5 AMPS single pole one way

All as per Item No 41 here in above but One 3 pin 5 Amps socket outlet on same board controlled by one, one way 5 Amps piano switch complete all as specified and directed.

All as per Item No 41 here in above but One socket outlet 5/3 pin 5 Amps controlled by one switch on independent board complete all as specified and directed.

Material and labour for power point wiring for one 15 Amp switch socket combined outlet point on Independent Board with 2.5 Sqmm PVC insulated unsheathed,stranded copper conductor cable single core 1100V grade with in and including rigid PVC conduit 20mm or higher size medium grade in concealed manner with all PVC conduit accessories with provision of CI/pressed steel terminal switch box & white bakelite plastic laminated top sheet cover fixing with brass screws and cup washers and 1.5Sqmm PVC insulated unsheathed stranded copper single core 1100V grade as earth wire & wire connected with the main earth point all as specified & directed. (Make of Cable : Finolex/RR Cable/Havells & Make for Conduit : AKG/PRESTOPLAST): -

S&F Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed.

S&F socket outlet flush type 3/5 pin 5/6 Amps 230V AC all as specified and directed complete all as specified and directed.

S&F switch piano flush single pole one way 15/16 Amps all as specified and directed complete all as specified and directed.

S&F socket outlet flush type 5/6 pin 15 Amps 230V AC all as specified and directed complete all as specified and directed.

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F MCB DB SPN 8 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure.double door type complete all as specified and directed. Make : Legrand/Schneider/Hagar

Supply & fixing MCB , SP, AC, 240 volts of 06 to 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make : Legrand/Schneider/Hagar

Supply & fixing MCB SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make : Legrand/Schneider/Hagar

Supply & fixing Dummy Plates for MCB DB's complete all as specified and directed.

S&F 1100 volt grade heavy duty cable PVC insulated aluminium conductor, served with inner seathing of PVC tape and overall PVC seathed in service of PVC seathed in service connections sus-pended by insulating hangers not more than 1 metre apart including 4 mm suspension wire. one twin core cable flat or circular of size 10 sq mm 2 core multistranded.

S&F suspended LED Tube light fitiing 20 Watt with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with complete with all accessories all as specified & directed Make - Havells Cat Part No - CONSTA544LP20W LED 840SPCWH or equivalent of Philips/Wipro.

S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit 10 W LED luminaire comprising of high brightness LEDs complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable all as specified & directed. Make ; Philips/ Havells / Wipro.

S & F Lumeno LED Bulb 10 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for "B-22 type to fix on batten holder Make ; Philips/ Havells / Wipro.

Earthing complete with galvanized earth plate electrode 600x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-0 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe complete all as spfd and as directed. connected to earthing list point all as specified and as directed.

Supply & fixing House service bracket (hook type complete with 3.0m long G. I. pipe 40mm dia Med. Grade, two nos 90⁰ bends. M.S. hook and stay guy complete all as specified & directed

NAND KISHORE ANIL KUMAR

S D Constructions