SPECIAL REPAIR FOR REPLACEMENT OF EXISTING WIRING OF AF SCHOOL BARRACKPORE AND CERTAIN REVENUE AND MINOR WORKS AT AF STN BARRACKPORE UNDER GE (AF) BARRACKPORE

Amount

Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames with shutters exc. 1.50 sqm but n.exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish from the site complete all as specified and as directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) including removing of rubish from site complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5mtr in depth and getting out in soft/loose soil for laying of under ground cable complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and directed.

Removing excavated materials (soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above from starting point complete all as specified and directed.

Material and labour for sand cushioning with clean and dry river sand for protection of PVC cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and as directed. Note:- Punned down thickness shall be measured for payment.

Materials and labour for brick protection cover to underground cables with sub class ‘B’ of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed.

Material and labour for cutting the road/hard standing and making good disturbed surfaces by using PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) for fixing the pipe complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (using 40 mm grade stone aggregate) as in foundation and mass concrete complete all as specified and directed.

Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) in cover slab and set in cement mortar (1:4) complete all as specified and directed.

Supply only integral water proofing compound (WPC) complete all as specified and directed.

Material and labour for brickwork with fly ash bricks straight or curved on plan exc 6 meter mean radius built in cement mortar (1:6) complete all as specified and directed.

Cutting chases in brick wall for concealed water tubing, pinning in making good to facings where required and pointing in cement mortar 1:3 cutting not exc 10 cm girth complete all as specified and directed.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part–II (2020) complete all as specified and directed.

Supply and fix factory made PVC door shutters 30mmm thick (Style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Supply and fix factory made door frame single rebate made out of solid PVC foam profile wih homogeneous fine cellular structure having smooth outer integral skin of size 125mm width x 60mm thickness of approved colour and fixed to the wall complete all as specified and directed.

Supply and fix factory made solid panel PVC moulded door shutter 30 mm thick (style) with 2,4 or 6 raised pannel design with 2mm thick moulded pvc sheet on the front face & 2mm plain colour pvc sheet on back face supplying & fixing in frame at site as per drawing & specification complete all as specified and directed.

Supply and fix solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

Supply and fix 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Supply and fix 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

Supply and fix 125mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 125mm size aluminium alloy handles, fabricated type extruded section complete all as specified and as directed.

Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

Supply and fix in repair 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

Material and labour for mild steel TMT bars 8 to 10 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Supply and fix in repair 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decoratice choice laminations fixed to framed work complete all as specified and directed.

Supply and fix aluminium powder coated door shutter /window /partitions partially glazed and partially louvered as required size aluminium section minimum weighting 0.55 kg/m matt finish section with including necessary jointing cleats, glazing clips, neoprene packing, handles 02 Nos in each door, hings, anodized aluminium snap beading, screws etc fixed with aluminium flat 25x1mm for fixing stainless steel mosquito proof net complete all as specified and directed. Note:- Minimum thickness of powder coating shall be 50 micron.

Supply and fix aluminium wire cloth 0.45mm nominal dia of wire and average width of aperature 1.4 mm and fixed with aluminium wire staples complete all as specified and directed.

Supply and fix aluminium (die cost body) door closer hydraulically regulated, designation No-3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Material and labour for 40mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in floor including finish the surface even and smooth with using extra cement complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square or rectangular) area of each tile exc. 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for digital glazed ceramic coloured tiles (premium quality) of size 350x250x7 mm thick on walls as in dados/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (premium quality) of size 300x200x7 mm thick on walls as in dados/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

Material and labour for vitrified ceramic tiles (premium quality) 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in cement mortar (1:6) including grinding and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge such as in steps, cooking platform and other similar situations complete all as specified and directed.

Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers, first layer of 10mm thick and top layer of 5mm thick with using water proofing coumpound (WPC) @ 2% or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.

Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

Supply and fix 15 mm GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviciable GI pipe complete all as specified and directed.

Supply and fix 20 mm GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviciable GI pipe complete all as specified and directed.

Supply and fix in repair 75mm dia cast iron nahani trap with gratings including joining to waste pipe fixed in cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate) complete all as specified and directed.

Supply and fix in repair 75mm bore cast iron floor trap with grating including jointing to waste pipe in run lead for including CP grating cover with or without hole complete all as specified and directed.

Supply and fix 75mm bore cast iron floor trap with grating including jointing to waste pipe in run lead for including CP grating cover with or without hole complete all as specified and directed.

Supply and fix in repair 15 mm dia bib taps, fancy type,chromium plated with crutch or butterfly handle, screwed down complete all as specified and directed.

Supply and fix in repair 15 mm dia stop valves (concealed type), fancy type, chromium plated with long shank and cup, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.

Supply and fix in repair 15 mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix 15 mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix in repair 15 mm pillar taps cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and directed.

Supply and fix in repair 10 Ltr capacity PVC valve less symphonic action type flushing cistern, low level with inlet, ball valve, float all as specified including necessary flush pipe complete all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid on floors complete all as specified and directed.

All as per item No 61.00 here in before but 75mm bore and -ditto-.

Supply and fix in repair 110mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.

Supply and fix in repair 75mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix kitchen stainless steel sink, 1.00 mm thick with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495 mm x 420 mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Material and labour for AC point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 4 sqmm (nominal area) in and including heavy duty rigid non metalic 20mm dia PVC conduit with accessories of suitable for fixing of industrial box in recess to existing wall surface with one single core PVC insulated unsheathed 4 sqmm (nominal area) multistranded FRLSH copper conductor as earth continuity wire and connected to earth dully complete all as specified and directed. Note: (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix PVC conduit and industrial box .

Material and labour for light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including heavy duty rigid non metalic PVC conduit with accessories of suitable size including 1.2mm thick pressed steel terminal boxes in recess to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing switches, sockets and regulators with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor as earth continuity wire and connected to earth dully complete all as specified and directed. Note: (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix PVC conduit and MS terminal box.

Material and labour for light/fan point wiring (concealed type) with single core PVC insulated unsheathed multistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including heavy duty rigid non metalic PVC conduit with accessories of suitable size including 1.2mm thick pressed steel terminal boxes in recess to existing wall surface with 3mm thick bakelite sheet top cover (ISI marked) fixed with chromium plated brass screws and cap washers suitable for housing switches, sockets and regulators with all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor as earth continuity wire and connected to earth dully and including taking down old u/s existing point wiring with all fixtures such as switches, sockets etc.complete all as specified and directed. Note: (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix PVC conduit and MS terminal box.

All as per item No. 71.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-.

All as per item No. 71.00 here-in-before but for one five pins 5 Amps socket outlet point on same board and -ditto-.

All as per item No. 71.00 here-in-before but for 15 amps socket outlet with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dully and -ditto-.

All as per item No. 71.00 here-in-before but for AC and geyser points with 4 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 4 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dully and -ditto-.

Supply and fix of switch piano one way 5/6 amps 240 volts, single pole complete all as specified and as directed.

Supply and fix of socket outlet 2 in 1, 3 pin , 5 amps flush type complete all as specified and as directed.

Supply and fix of switch socket combination 2 in 1, 5 pin , 5 amps flush type complete all as specified and as directed.

Supply and fix of switch socket combination 5 in 1, 5/15 amps socket complete all as specified and as directed.

Supply and fix of ceiling rose, 3 terminals, fabricated of PVC/Polycarbonate, isolated body complete all as specified and directed.

Supply and fix of delux stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.

Supply and fix 25 Amp starter 2 module for AC and geyser points complete all as specified and directed. Make:- LEGRAND Cat No 6730 31 or equivalent model of SCHNEIDER / SEIMENS / HAGER / L&T.

Supply and fix in repair modular switch 1 way 6 amps, 1 module complete all as specified and directed.

Supply and fix in repair modular switch 1 way 16 amps, 1 module complete all as specified and directed.

Supply and fix in repair modular shuttered sockets 6 amps, 2/3 pin combined two module complete all as specified and directed.

Supply and fix in repair modular shuttered sockets 6/16 amps, 2/3 pin combined two module complete all as specified and directed.

Supply and fix in repair modular fan regulator step type 120W, 2 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame of 1/2 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame of 3 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame of 6 module complete all as specified and directed.

Supply and fix in repair modular white cover plate with frame of 8 module complete all as specified and directed.

Supply and fix in repair modular flush metal box 1/2 module complete all as specified and directed.

Supply and fix in repair modular flush metal box 3 module complete all as specified and directed.

Supply and fix in repair modular flush metal box 6 module complete all as specified and directed.

Supply and fix in repair modular flush metal box 8 module complete all as specified and directed.

Supply and fix in repair single pole and neutral (DP) enclosure with a two pin and earth plug and socket complete with one single pole MCB 240 V, 20 Amps "C" series complete all as specified and directed. Make:- LEGRAND Cat No 5078 11 or equivalent model of SCHNEIDER / SEIMENS / HAGER / L&T.

Material and labour for sub-main wiring comprising single core , 4 runs of 6 sqmm nominal cross sectional area, FRLSH multistranded copper conductor cable, PVC insulated unsheathed 1100 volts grade drawing in 25mm dia heavy duty PVC conduit and its fittings complete surface/concealed including provision of 2x6 sqmm nominal cross sectional area, single core FRLSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire including taking down old unserviciable existing sub- main wiring complete all as specified and directed. Note :- (i) Extra length of cables/ wire required for connection to MCBs/DB's shall be included in quoted rate. (ii) Cuttings /chasing of wall etc and making good the disturbed surface shall be measured and paid separately under respective items.

Material and labour for concealed sub-main wiring comprising single core , 2 runs of 4 sqmm nominal cross sectional area, FRLS multistranded copper conductor cable, PVC insulated unsheathed 1100 volts grade drawing in 25mm dia heavy duty PVC conduit and its fittings complete including provision of 1x4 sqmm nominal cross sectional area single core FRLSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire including taking down old unserviciable existing sub- main wiring complete all as specified and directed. Note :- (i) Extra length of cables/ wire required for connection to MCBs/DB's shall be included in quoted rate. (ii) Cuttings /chasing of wall etc and making good the disturbed surface shall be measured and paid separately under respective items.

Supply and fix in repair sheet metal enclosure SPN DB 8 ways double door having facility to fix MCB in incomer and MCBs in outgoing, metal door IP-43 type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed.

Supply and fix in repair sheet metal enclouser SPN DB 4 ways double door having facility to fix MCB in incomer and MCBs in outgoing, IP-43 type complete fitted with 200 Amp rated bus bars, neutral links, blanking plates complete all as specified and directed.

Supply and fix in repair MCB-DB TPN 4 way, double door, sheet steel phospetised powder painted with 200 amps rated bus bar, 415 V neutral link, IP-43 type, earth bar and din rail when MCB to be used complete all as specified and directed.

Supply and fix in repair MCCB-DB TPN 4 ways (double door) with MCCB incommer and MCBs in outgoing including bus bar neutral link, IP-43 type, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

Supply and fix in repair MCCB 160 Amps current capacity, 415V, 16 KA, 4 Pole, adjustable thermal and magnetic type complete all as specified and directed.

Supply and fix in repair MCB SPN, 240 Volts, 40 to 63 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.

Supply and fix in repair MCB TPN, 415 Volts, 40 to 63 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.

Supply and fix in repair MCB SPN, 240 Volts, of 32 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.

Supply and fix in repair MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.

Supply and fix sheet metal enclouser SPN DB 4 ways double door having facility to fix MCB in incomer and MCBs in outgoing, IP-43 type complete fitted with 200 Amp rated bus bars, neutral links, blanking plates complete all as specified and directed.

Supply and fix MCB SPN, 240 Volts, 40 to 63 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.

Supply and fix MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.

Supply and fix in repair 36 W recessed LED ceiling light suitable for 600 x 600 mm (2 feet x 2 feet) grid ceiling complete with all accessories including internally prewired connecting upto 1.5 sqmm 3 core twisted flexible copper conductor cable complete all as specified and directed. Make:- Crompton Cat No LCTLRF6-36-CDL or equivalent model of Philips / Bajaj / Havells / Magik

Supply and fix in repair energy efficient batten type LED lights fittings luminaire 40 watt, 125lm/watt, 220V, AC pre wired with driver, including LED tube light including connecting up with 1.5 sqmm 3 core flexible copper conductor cable from ceiling rose complete all as specified and directed. Make:- Crompton Cat No CCS-100-40-65-SL-DP-NWH equivalent model of Philips / Bajaj / Havells / Magik.

Supply and fix in repair energy efficient batten type LED lights fittings luminaire extruded alluminium body 10 watt, 100lm/watt, 220V, AC pre wired with driver, holder including LED tube light including connecting up with 1.5 sqmm 3 core flexible copper conductor cable from ceiling rose complete all as specified and directed. Make:- Crompton Cat No CCS-103-05-30-SL-DP-NWH equivalent model of Philips / Bajaj / Havells / Magik.

Supply and fix in repair 30 watt LED building security light fitting made with pressure die cast housing with toughened glass with high powered LED, IP-66, 5700K, 230 Volt complete all as specified and directed. Make:- Crompton Cat No LSTS-30-CDL-M or equivalent model of Philips / Bajaj / Havells / MAGIK.

Supply and fix warning light red wired base LED revolving light / red beacon light of red colour, audible range maximum of 90db, 220-240V, revolving speed 120-140RPM, IP-54, made of ABS housing heat resistant materials complete all as specified and directed. Make:- Crompton / Philips / Bajaj / Havells / MAGIK.

Supply and fix flame proof LED light fittings fixtures CIMFR certified luminaire 2 x 20 W, 4 feet long, 230V, IP-65 with bi-pin holder connector block with twin T8 tube of 20 W etc complete with all accessories including internally prewired connecting upto 1.5 sqmm 3 core twisted flexible copper conductor cable complete all as specified and directed. Make:- Crompton Cat No for batten EXTN2LT8-16/20 and for tube LTT8-20 or equivalent model of Philips / Bajaj / Havells / Magik

Material and labour for street light bracket made of 1.5 RM length of GI pipe of medium grade of 40 mm dia in proper shaped, bend, threaded and drilling holes for wire entry and MS clamps (02 Nos) of suitable size in proper shape including taking down old unserviciable street light bracket cmplete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 15 mm bore (light grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10 cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part-I including testing on completion including taking down old existing unserviciable earthing complete all as specified and directed. Note:- GI wire upto 7.5m length including testing shall be included in quoted rates.

Material and labour for earth continuity conductor / steel wire of 4mm dia, main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or DB's / Indoor type LT PBs or any other indicated situation for loop earthing etc including taking down old existing unserviciable earth continuity conductor complete all as specified and directed.

Supply and fix 380mm sweep exhaust fan AC single phase 230/240 volt. along with metal blade powder coated metalic finish with louvers, low noise including necessary electric connection with and including cutting/making opening having dia of the hole for 380mm sweep exhaust fan in any type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and as directed. Note : The rate of materials used for scafolding works shall be deemed to be included in the coated rate, materials also be arranged by the contractor and also shall be taken the safety of the workers employed by the contractor at his own risk.

Supply and fix 300mm sweep exhaust fan AC single phase 230/240 volt. along with metal blade powder coated metalic finish with louvers, low noise including necessary electric connection with and including cutting/making opening having dia of the hole for 300mm sweep exhaust fan in any type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and as directed. Note : The rate of materials used for scafolding works shall be deemed to be included in the coated rate, materials also be arranged by the contractor and also shall be taken the safety of the workers employed by the contractor at his own risk.

Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 6 Sqmm, 2 core, 1100 Volts (earthed) grade, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.

Material and labour for cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed.

Supply and fix galvanised iron pipe 40mm bore (light grade) for protection of UG Cable, laid in floors / road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc. complete all as specified and directed.

Supply, installation and testing of 1.5 ton inverter type split Air Conditioner complete with cordless remote control unit with inbuilt air ioniser and plasma filter, copper condenser, 5 star rating complete all as specified and directed.

NC BOSE AND CO

KUMAR ENTERPRISE

KAZI ENTERPRISE

TAPAS ENGINEERING CO

Das and Brothers

ROY CONSTRUCTION

M/S A. J. CONSTRUCTION