REPAIR AND REPLACEMENT OF PLUMBING WORKS AND LEAKAGE SEEPAGE AT OTM ACCN ON EAST SIDE OF LEHL MARG INCLUDING TELEPARA UNDER GE S BINNAGURI

Amount

Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site as directed.

Taking up or down GI 20mm steel tubing and connections incl cleaning for refixing or removal to store.

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Refixing of reusable GI pipes of 15mm bore after necessary cleaning and renewal of GI fittings as required all as specified. Note: (i) GI tubing retrieved against relevant item shall be reused. (ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same.

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Refixing of reusable GI pipes of 20mm bore after necessary cleaning and renewal of GI fittings as required all as specified. Note: (i) GI tubing retrieved against relevant item shall be reused. (ii) New GI fittings required shall be supplied by the contractor and the quoted rate shall be deemed to be inclusive of the cost of the same.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq. m each etc complete all as directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors, double rebates including necessary fixing lugs, 06nos 100mm size stainless steel hinges (03 nos for each shutter), lock strike plate,filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5mm graded stone aggregate) etc complete all as directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors, one or more rebates including necessary fixing lugs, 06nos 100mm size stainless steel hinges (03 nos for each shutter), lock strike plate,filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5mm graded stone aggregate) etc complete all as directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc all as specified..

S&F Factory Made 35mm thick Ist class hardwood glazed & skeleton or gauze shutters (door/window), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc. edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, length of bolt 300 mm etc all as specified.

S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections, with cast or sheet barrel and rolled or cast bolts etc all as specified.

S & F 150 mm size extruded aluminium handles fabricated type, anodised and polished etc all as specified.

S&F 300mm, ordinary MS rat tail rod pattern springs including roller and roller plate complete etc complete all as directed.

S & F in repairs 25 mm dia (OD) Curtain rod stainless steel 0.80mm thick with fixing brackets, stops, rollers etc.

S&F in repairs stainless steel curtain rails brackets fancy type for 20mm dia curtain rails etc all as specified.

S & F floor door stopper 75mm long of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor overall length of cover plate 150mm etc all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc all as specified.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sq. m each etc all as specified.

M&L for Solid wood grain printed PVC Door Frame of the size 50 x 47mm made out of grain printed 5mm PVC sheet. The door profiles are to be reinforced with 19xl9mm M.S. Square tube. EPDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed etc complete all as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face With Particle With Wood Board Core , supplying & fixing in frame at site as per specification & drawing

S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with wood grain printed PVC sheet 5mm thick ‘C’ channel having a 5mm thick wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross wood grain printed PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1

S & F 100 mm size aluminium anodised barrel tower bolts of extruded sections, with cast or sheet barrel and rolled or cast bolts etc all as specified.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, length of bolt 250 mm etc all as specified.

S&F 75 mm size butt hinges, cast brass, with stainless steel hinge pin, bright polished and fixed etc complete all as directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc all as specified..

Material and labour rendering 20mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces in two layer 10mm each layer and top layer mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished fair and even (without using extra cement) all as specified..

M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) all as specified..

M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 all as specified..

M&L for 60mm thick M-35 grade factory made vibratory compected cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick consolidated sand cushion and joints filled with sand all as specified..

M &L for Hardcore of gauge n exc. 63 mm, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in hardstanding and footpath finished even and rough to receive finishes complete all as specified and as directed.

M& L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges of 1:2:4 of B0 all as specified.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection and footpath laid in panels and finished even and smooth without using extra cement including necessary form work all as specified.. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 75mm etc all as specified.

Demolition and breaking up drain pipes embedded in stone/brick masonary (Salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 100mm etc all as specified.

Supply and fix as in repair for PVC (SWR) pipes 75mm dia,type 'A' conforming to IS, single socketed, in any length with rubber ring joints laid in trenches or floor complete all as specified.

All as per above but 110mm dia

S&F in repairs 110mm bore of pipe PVC (SWR) type 'A' pipes single socketed, in any length with rubber ring joints fixed to walls etc all as specified.

S&F in repairs 75mm bore of pipe PVC (SWR) bends any radius with access door etc all as specified.

S&F in repairs 75mm bore PVC (SWR) bends any radius

S&F in repairs 110mm bore PVC (SWR) bends with acess door

S&F in repairs 110 mm bore of pipe PVC (SWR) plain bends any radius etc complete all as directed.

S&F in repairs 110mm bore of pipe PVC (SWR) vent cowl etc all as specified.

Dismantling of Ceiling Board of any description and any thickness including Cover Fillets, Cornices, etc complete all as specified and as directed.

Supply and fixing for aluminium anodised snap grid (605X605mm size) to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm, cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including proper hanging arrangement with 4 mm dia anodized galvanised iron wire with false ceiling iof 4 mm thick E board classic for insulation and accoustic purposes of size 600X600 mm fixed with necessary accessories to frame work or with staples on snap grid upto ceiling proper scafolding arrangementsand with complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified..

Supply and fix 0.50mm thick prepainted galvalume polyester coated (SMP coating) coloured metal roofing sheet trapezoidal profile having tensile strength 550Mpa as in roof covering fixed with self drilling screws with EPDM washer etc complete all as specified.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw all as specified..

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication all as specified..

S&F MS steel Hollow section Square/rectangular as in roof truss ,purlin,rail etc etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication all as specified..

Dismantling wrought iron or mild steel work of any description as in door, gates etc and similar works complete all as directed.

Supply & fix framed work such as grills, gratings, etc., with ends of bars shouldered and/or riv-eted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 390 Gde E-165 complete all as directed.

Supply and fix as in repair for pillar taps (central hole basin mixer) with U shaped round casted spout with 3" long pipe connection with aereator made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed. Make: Essco Cat No MQT 516A or equivalent in the list of makes.

Supply and fix in repair 15 mm bore Bib tap long body with wall flange with aerator all as specified. Make : Essco Cat No MQT 512 or equivalent

S&F in repairs 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc all as specified.

Supply and fix in repair 15 mm bore stop valve brass chromium plated for iron pipe or for unions including all as specified. Make : Essco Cat No MQT-513A/513B or equivalent as in the list of makes.

S&F in repairs 15mm size fancy type brass chromium plated wall mixer 3-in-1 system with and including both telephone shower and overhead shower complete with wall flange, 115mm long bend pipe, shower arm 190mm long heavy casted body with wall flange and pressure adjustable shower with revolving joint of approved series of make or equivalent of Marc etc complete all as directed.

S&F in repairs glass shelf of size 500x125mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc all as specified. Make Prayag Cat No BEA-45G or equivalent as in the list of makes.

S&F in reair of brass chromium plated soap dish all as specified. Make Prayag Cat No GBA-135 or equivalent as in the list of makes.

Supply and fix as in repair for CP brass tubular towel rail 60 cm long between flanges all as specified. Make: Essco Cat No AEC-1111or equivalent in the list of makes.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm etc all as specified.

Supply and fix in repair vitreous China wash basin white, flat back, size 580 x 460 mm with CP brackets (02 Nos), CP waste coupling full threaded 32mm dia, including cutting for pinning in ends of brackets and making good disturbed surfaces with CM (1:4) complete all as specified. Make:-(i) HINDWARE Cat No 10064 (Melisa) or equivalent in the list of makes. (ii) Essco Cat No ALE-544FT for waste coupling or equivalent in the list of makes.

Supply and fixing in repair for vitreous China (white) wash down water closet pan (pedestal pattern) of size 935 x 425 x 780mm with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, PVC seat cover (white) with SS fittings and making all necessary connections complete as specified. Make: Hindware Cat No 20011 (Sleek) for water closet or equivalent in the list of makes.

Supply and fix in repairs toilet paper holder chromium plated complete. Make:- Essco Cat No AEC-1151 or equivalent in the list of makes.

S & F in repairs PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc all as specified.

S&F in repairs mirrors of size 900mm x 600mm with aluminium powder coated frame in handle section fixed with rubber gaskets and fixed to brick/stone masonry walls built in cement mortor etc all as specified.

S&F in repair ABS health faucet chromium plated with 1.00m tube and hook complete all as specified. Make Prayag Cat No GBEA-907 or equivalent as in the list of makes.

M & L for preparation of new steel surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc all as specified.

M & L preparation of old treated steel surfaces of any description over 10cm in girth or width & applying one coats of synthetic enamel paint etc all as specified.

M & L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coat of synthetic enamel paint over a coat of primer etc all as specified.

M & L for preparation of old wood surfaces of any description over 10cm in girth or width & applying one coat of synthetic enamel paint etc all as specified.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc all as specified.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 etc complete all as directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 etc complete all as directed.

M&L for prepartion of newly plastered surfaces of walls and applying two coats of acrylic distemper over a coat of primer after application of two coats of wall putty 1.00 mm thick each layer (average thickness) to wall surface complete all as specified.

M&L applying two coats of exterior acrylic emulsion paint of over a coat of white primer including preparation of new surfaces all as specified..

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of acrylic distemper over a coat of primer after applying 2 coat of wall care putty 1.00 mm thick each layer (average thickness) including complete removal of existing treatment all as specified and directed.

M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing all as specified..

M&L for preparartion of old surfaces applying two coat of white washing on ceiling surfaceall as specified..

Material and labour as in repair for hoisting and fixing rotational moulded polyethylene(double layer) water storage tanks 1000 lit capacity (Cylinderical vertical), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet, over flow connection, ball valves etc complete all as specified.

M&L for waterproofing treatment to sunken floor with the following course of treatment/specification all as per manufacturer’s specification and as specified:- (i) Cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc. (ii) Providing and applying a glass fibre reinforced elastic, acrylic polymer based – cementitious coating system. Apply base coat of SikaTop®-107 Seal IN or equivalent by brush with a consumption of base coat @ 1.50 kg/m2. (iii) Sealing of all corners & joints (wall to wall & Wall to floor) with Sika seal Tape F or equivalent in the list of makes. (iv) Lay the fabric Sika® Fab-1 or equivalent on basecoat. (v) Apply second /top coat of SikaTop®-107 seal IN by brusg with a consumption @ 1.50 kg/m2. Acrylic polymer modified cementitious liquid applied waterproofing coating system should meet the requirement.: density: 2.00 kg/ltr; compressive strength: 20 N/mm2; bond strength: 2.0 N/mm2; (v) Filling of 2nos 32mm bore GI medium grade 450mm long sprout to be provided through extrenal wall to drain out accumulated water by providing and filling with Sikacrete-145 IN or equivalent, factory designed pourable, shrinkage compensated, free flowing and self-compacting superior performance micro concrete complying to ASTM C 1107 and having following physical properties: bulk density ~1.5 kg/l at 27°C; Contd item No 86.00----

Contd item No 86.00--- Compressive Strength at ambient temperature of +30°C according to ASTM C 109 in 1 day ~15 N/mm2, in 3 days ~25 N/mm2, in 7 days ~45 N/mm2 and in 28 days ~50 N/mm2; Flexural Strength at ambient temperature of +30°C according to EN 196-1 in 7 days ~5 N/mm2 and in 28 days ~7 N/mm2; Bond strength ~ 2 N/mm2 as per EN 1542. (vi) Pipe Sealing : Supply and apply Sikagard®-694 F (I) or Equivalent approved make solvent free, moisture insensitive epoxy resin based patch repair putty on pipe penetration surfaces. The putty shall be applied to a thickness of minimum 20mm on pipe penetration joint to concrete. Product: . Yield: 0.6 ltr/kg. Product requirements: suitable for submerged condition; compressive strength of 40 N/mm2 (1 day) according to IS 9162-1979. (vii) Sunket floor shall be tested for water tightness by filling water for 72 hrs after treatment work is carried out to ensure that no leakage or seepage exists. (viii) Protection of Waterproofing in Horizontal : Providing and applying a protection screed of 50 mm thick 1:4:6, cement sand mortar admixed with Sika Plastocreteto or equivalent @100ml per 50kg bag of cement & conforms to IS 2645 to be laid on slope in 1:20 towards sprout/drainage outlet over the applied waterproofing coating. (ix) Protection Plaster in vertical: Supply and apply a protection plaster (12 – 15 mm) admixed with integral waterproofing compound Sika® Plastocrete Plus or equivalent @100ml per 50kg bag of cement conforms to IS 2645.

Removing existing water proofing treatment to complete any descrption,thickness and in any position including removal of rubbish of the premises etc complete all as directed.

M&L for water proofing treatment to RCC roof slab as specified below and all as specified:- (a) 10mm th cement plaster in CM 1:3 with integral WPC to be laid over the RCC roof slab when the concrete is green. (WPC shall be measured and paid separately as "Supply only". (b) 4mm thick plain texture and weighing not less than 4.00 kg/sqm atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reainforced with non woven polyster matt black finished over water bases primer at 0.4 Ltr / Sqm of density at 25 degree centigrade 0.87 - 0.89 kg/ltr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while torchin g shall be 150mm on length side and 10 mm on width side. after necessary preparation of surface complete as per manufacturers instruction. M/s fosroc chemicals "Proofex Torchseal 3PI/4PI/Antiroof Plain" or M/s STP Limited "Super Themolary APP PL/MT/Superior Shaliplus/industrual bitumen, ShaliTex Primer" or M/s Sika India Pvt Ltd "Sika WP Shield 103P/PM/ Sika WP Shield 104P/PM) or equivalent as approved by GE. (d) Apply two coats of bitumastic - Aluminium paint over the membrane.

M&L for cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) 25mm thick as in roof to achieve slope on existing roof surface all as directed.

M&L for cutting out cracks to 'V' section (shape) in existing roof slab terracing cleaning out and filling solidely with cement and sand mortar (1:1) complete all as specified and as directed.

M & L PCC (1:2:4) type B1 (20mm graded aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed. (Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule 'A').

Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs.

Material and labour for hoisting and fixing rotational moulded polyethylene(double layer) water storage tanks 500lit capacity (Cylinderical vertical), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet, over flow connection, ball valves etc complete all as specified.

Disconnecting existing tanks of capacity exc 250 Ltrs and n. exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc all as specified..

M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in water tank platforms,filling and mass concrete.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut.

Dismantling hearth or wall tiling of any description, size and thickness including cement mortor bedding , removing rubbish off the premises etc complete all as directed.

M & L for glazed ceramic coloured joint free tiles in vertical surface 450X 350X 7mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc all as specified.

M & L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc all as specified.

Ditto all as per item No 99.00 above but in skirting over 10mm thick backing coat in CM 1:4 all as specified.

M & L for Non-skid Ceramic tiles 8 mm thick (square/rectingular)polished area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc all as specified.

Ditto all as per above but in skirting over 10mm thick backing coat in CM 1:4 all as specified.

Tirupati Construction (BID ID -3238591)

M/S JAGDISH PRASAD AGARWALA (BID ID -3240483)

N K Construction (BID ID -3241175)

R.MANJIT& CO (BID ID -3239304)

SHRI MANOIRANJAN BISWAS (BID ID -3238608)

M/S NIKITA ENGINEERING CO (BID ID -3238626)

M/S SINHA ENTERPRISE (BID ID -3241151)

SINGH & CO (BID ID -3240082)

R K AGARWAL (BID ID -3238860)