MAINTENANCE OF INTERNAL ELECTRIFICATION IN MD OTM ACCN AT CERTAIN BUILDING OF ENTIRE AREA OF CHAUBATTIA UNDER GE RANIKHET

Amount

Taking down carefully copper /aluminium point wiring (light, fan, socket or power) complete fittings such as switches and fixtures ceiling roses, pendants, regulators, sockets, lamp holders, bracket light fittings, bulk heads fittings, tube light fittings etc removing the materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

S&F point wiring for one light point/ fan/ bell/ 5 Amps socket out let (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multi-strand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/ colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multi-stranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed.

All as per item No 2 above but one light point controlled by two way switch.

All as per item No 2 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No 2 above but one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

S&F point wiring for one light point/ fan point/ bell point/ 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable ( FRLS) drawn into and including existing conduit and terminal boxes and matching the existing suface mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed.

All as per item No 7 above but one light point controlled by two way switch.

All as per item No 7 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No 7 above but one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 7 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

S&F point wiring for one light point/ fan point/ bell point/ 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed.

All as per item No 12 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No 12 above but one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 12 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F switch piano flush type single pole, two way 6 Amp complete all as specified and directed.

S&F socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

S&F socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F ceiling rose, PVC/ poly carbonate, isolated body three terminal complete all as specified and directed.

S&F lamp holder angle type PVC/ poly carbonate type insulated body with back plate suitable for batten/ wall fitting complete all as specified and directed.

S&F call bell ding dong AC, 230V single pole complete all as specified and directed,

S&F bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F high quility LED T8 indoor batten tube light 20 watt with aluminium extrusion in D shaped have large diameter for increased convection heat transfer incl one LED PC tube rod and driver, internaly pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings.

S&F high quility LED T5 integrated batten tube light 20 watt with aluminium extrusion with frosted PMMA/ PC diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings.

S&F in repair MCB single pole, 240 volts, 5 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S&F in repair MCB double pole, 240 volts, 16-32 Amp, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S&F in repair MCB four pole, 415 volts, 40 to 100 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

S&F in repair RCCB double pole, 240 volts, 40Amp, rupturing capacity 10 KA, sensivity 30MA with backup fuse type complete all as specified and directed.

S&F in repair RCCB four pole, 240 volts, 63Amp, rupturing capacity 10 KA, sensivity 30MA with backup fuse type complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs (double door type) single pole and neutral 8 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclosure for DBs (double door type) single pole and neutral 12 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclosure for DBs (double door type) single pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

S&F in repair sheet metal enclosure for DBs (double door type) triple pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

Taking out old sub main wiring and S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 4 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 4 Sqmm copper conductor PVC complete all as specified and directed. (Note:- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Taking out old sub main wiring and S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 6.0 Sqmm copper conductor PVC complete all as specified and directed. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 10 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 10.0 Sqmm copper conductor PVC complete all as specified and directed. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

Taking out old service connection cable and S&F service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 10 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

Taking out old service connection cable and S&F service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S&F high quility LED lighting fixture mirror type with high output diffuser 2 feet 1x 10 Watt. 220V AC,complete with polycarbonate tube, white/warm white suitable for mirror light internally pre wired of 1.5 sqmm three core flexible cable complete all as specified & directed. NOTE: The contractor must submit 5 years warranty for LED fittings.

S&F high quality indoor LED PLL base lamp 4 pin, 18 Watt (with inbuild driver) complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings.

S&F exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed

Taking down for repair of exhaust fan of size 250 mm to 450 mm sweep of any type including replacement of burned copper winding, bearing and any other accessories and refixing after repair with suitable size nut bolts and wire complete all as specified and directed.

S&F in replacement high quility LED T8 tube rod 20 Watt (with inbuild driver) with single side connection including connection with wire of 1.5 sqmm twin twisted flexible cable complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings.

S&F in repair plug top 3 pin 15 amp complete all as specified and directed

S&F recess mounting LED 300x300 mm luminaire, 18 W, 230V, suitable for recessed mounting, with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F recess mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F surface mounting LED 300x300 mm luminaire,18 W, 230v, suitable for Surface mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F in replacement bldg security light luminaires of 25 watt LED suitable for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing fitting made of 32mm bore light grade GI pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F in replacement bldg security light luminaires of 45 watt LED suitable for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing fitting made of 32mm bore light grade GI pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F LED post top lantern suitable for 30W gate lights with diffuser and made in fully cast aluminium body finished with polyurethane paint with acrylic window cover complete with all accessories and base plate including LED lamp & PCC work (1:3:6 ) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser complete with all accessories and including LED light driver holder connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F LED luminaire wall bracket type, made in fully cast aluminium body finished with polyurethane paint with nipple having B22 holder incl 05 watt LED bulb complete all as specified and directed.

S&F recess mounted LED downlighter aluminium heat sink type, 9 watt with PC diffuser in white powder coated finish with integrated driver of complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F LED bollard fitting suitable for 12 Watt LED bulb with B-22 porcelain holder with cover fully cast aluminium body finished with polyurethane paint (with prior treatment) with acrylic window cover & including all fittings (Total length of fitting 1085 mm) and LED warm white bulb 12 Watt complete with all accessories and including PCC work (1:3:6 ) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

Taking out old sub main wiring and S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 2.5 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 2.5 Sqmm copper conductor PVC complete all as specified and directed. (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

S&F in replacement LED flood light luminaires of 120 watt 230 V AC with IP 66 outdoor type with thermal management in multiple optics with impact and corrosion resistant complete with driver and lamp and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F surface mounting LED luminaire 600mm x 600mm, 36 W, 220V, with high efficiency PMMA diffuser soft glare free light suitable for surface mounting, with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F high quality LED smart batten tube light 20 W, aesthetically designed LED having extruded aluminum housing with Microwave motion technology for providing an energy efficient solution and with aluminum housing & integrated electronic driver., internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F recess mounting LED luminaire 600mm x 600 mm, 36 W, 220v, with high efficiency deep inserted 16x mini lens modules with light enhancing technology which ensures high efficacy and excellent visual comfort offering UGR<16 with sleekest 18mm backlit design that can easily accomodate in low depth ceilings including flicker free driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

S&F in repair surface suspended LED circular luminaire, 25 W, 230 volt, suitable for suspended mounting with CNC stretch bent extruded aluminium in powder coated housing panel for surface mounting with an effective height of 70 mm and produces diffused planar and low glarel illumination complete with driver and all accessories internally pre wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note: The contractor must submit 5 years warranty for LED fittings.

Taking down old defective LED ceiling lights/ bldg security light of capacity 18W to 36W for repair and refixing it on surface/ recess/ bldg wall after repair including replacing old unserviceable driver/ LED plate or any other items/ accessories as required on site to make the light fitting serviceable complete all as specified and directed.

S&F modular switch, 1 way 6/10 Amp 1 module complete all as specified and directed.

S&F modular socket outlet 6/10 Amp 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch, 1 way 16/20 Amp 1 module complete all as specified and directed.

S&F modular socket outlet 16/20 Amp 2/3 pin combined 2 module complete all as specified and directed.

S&F in repair 6 core control cable to connect meter to parallel home display split unit for remote access of data/ operation including two cable end connectors(RJ-11) punching complete all as specified and directed.

S&F in repair recessed on wall, meter box fabricated from 1.2mm CRCA sheet of as per existing adequate size of secure meter, nominal for single phase meter 01 No, foamed in PU gasket, hinged door, cable gland plate 2mm thick provided at bottom, cam locking arrangement complete all as specified and directed.

M&L repair of refrigerator/ deep freezer of any size including repairing of damaged body and refilling of gas of freezer and replacement of defective parts and accessories including complete servicing and testing after repair complete all as specified and directed.

M/S NAYAL ELECTRICALS

Jain Traders

KUMAON VALLEY CONSTRUCTION

PARADISE INFRA POWER COMPANY

M/S BHATT ENTERPRISES