Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrAccepted-AOC | ₹1.6 Cr | L1 | Accepted-AOC L1 Accepted |
| Sl No | Description | Qty | Unit | seasoncontrol L1 |
|---|---|---|---|---|
| 1.00A/c | ||||
| 1.00 | OD168411/2023-2024:SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF DOUBLE SKINNED AIR HANDLING UNITS AS PER SPECIFICATION COMPLETE WITH MINIMUM 40MM THICK PANEL WITH 0.6MM GI ON EACH SIDE, 40KG/M3 PUF, WITH FAN SECTION WITH PLUG FANS, SUITABLE RATED TEFC MOTOR WITH NECESSARY DRIVE ARRANGEMENTS WITH VFD , COIL SECTION WITH 6 ROW DEEP DX COOLING COIL , FILTER SECTION WITH 10 MICRON PRE FILTERS AND 5 MICRON FINE FILTERS ALONG WITH INSULATED DRAIN PAN, MIXING BOX SECTION WITH FA AND RA DAMPER AND ALL , UV LAMP,OTHER STANDARD ACCESSORIES INCLUDING NECESSARY AHU KIT FOR VRF/VRV ODU 4000 CFM, 12.8TR,6 RD/ 125 mm TSP | 4 | each | 6,16,938.9 ₹24,67,755.6 Lowest |
| 1.00 | OD209672/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF DUCT TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING.
8TR DUCT TYPE IDU | 5 | each | 1,16,838.32 ₹5,84,191.6 Lowest |
| 1.00 | OD209671/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF DUCT TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 6.3TR DUCT TYPE IDU | 4 | each | 1,09,714.03 ₹4,38,856.12 Lowest |
| 1.00 | OD204234/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF CASSETTE TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 4TR CASSETTE TYPE IDU | 1 | each | 56,694.77 ₹56,694.77 Lowest |
| 1.00 | OD204237/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF CASSETTE TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING.
3.2TR CASSETTE TYPE IDU | 3 | each | 55,554.56 ₹1,66,663.68 Lowest |
| 1.01 | OD204238/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF HI-WALL TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. . 1.3TR HI-WALL IDU | 1 | each | 26,121.94 ₹26,121.94 Lowest |
| 1.01 | OD204247/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF HI-WALL TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING 1.6TR HI-WALL IDU | 1 | each | 27,157.05 ₹27,157.05 Lowest |
| 1.01 | OD208342/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF HI-WALL TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 2TR HI-WALL IDU | 1 | each | 28,117.29 ₹28,117.29 Lowest |
| 1.01 | OD208353/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF HI-WALL TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 2.6TR HI-WALL IDU | 4 | each | 39,496.34 ₹1,57,985.36 Lowest |
Tender Value
₹1.6 Cr
EMD Value
₹50,000
Closing Date
30 Jan 2026, 6:55 pmClosed
Chief Electrical Engineer
Office of the Chief Electrical Engineer PWD Electrical Wing Public Office Thiruvananthapuram
GENERAL Govt TD Medical College Alappuzha Trauma care Unit Health Family Welfare Department Annual Plan 2025 2026 Medical Education Implementation of Plan Scheme Completion of Trauma Care building at Government Medical College Alappuzha Air condition
2025_PWD_818491_2
PWD/BLDG/TR/1847/2022
Open Tender
Electrical Works
Item Rate
365 days
Alappuzha
Please refer Tender documents.
7 documents required · 7 mandatory
₹6,508
₹50,000
Yes
10 Mar 2026
22 Jan 2026
2 Feb 2026
22 Jan 2026
30 Jan 2026
22 Jan 2026
22 Jan 2026 - 30 Jan 2026
OD168411/2023-2024:SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF DOUBLE SKINNED AIR HANDLING UNITS AS PER SPECIFICATION COMPLETE WITH MINIMUM 40MM THICK PANEL WITH 0.6MM GI ON EACH SIDE, 40KG/M3 PUF, WITH FAN SECTION WITH PLUG FANS, SUITABLE RATED TEFC MOTOR WITH NECESSARY DRIVE ARRANGEMENTS WITH VFD , COIL SECTION WITH 6 ROW DEEP DX COOLING COIL , FILTER SECTION WITH 10 MICRON PRE FILTERS AND 5 MICRON FINE FILTERS ALONG WITH INSULATED DRAIN PAN, MIXING BOX SECTION WITH FA AND RA DAMPER AND ALL , UV LAMP,OTHER STANDARD ACCESSORIES INCLUDING NECESSARY AHU KIT FOR VRF/VRV ODU 4000 CFM, 12.8TR,6 RD/ 125 mm TSP
OD209672/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF DUCT TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 8TR DUCT TYPE IDU
OD209671/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF DUCT TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 6.3TR DUCT TYPE IDU
OD204234/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF CASSETTE TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 4TR CASSETTE TYPE IDU
OD204237/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF CASSETTE TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 3.2TR CASSETTE TYPE IDU
OD204238/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF HI-WALL TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. . 1.3TR HI-WALL IDU
OD204247/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF HI-WALL TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING 1.6TR HI-WALL IDU
OD208342/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF HI-WALL TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 2TR HI-WALL IDU
OD208353/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF HI-WALL TYPE VRF INDOOR UNIT. ALL INDOORS HAVE ELECTRONIC EXPANSION VALVE THAT CONTROLS THE FLOW OF REFRIGERANT IN RESPOND TO THE LOAD VARIATIONS OF ROOM ACCORDING TO SET TEMPERATURE, WHICH CAN SET BY REMOTE CONTROLLERS. ELECTRICITY CHARACTERISTICS FOR INDOOR UNIT SHALL BE 240 VOLTS/ 1PHASE / 50HZ. UNIT SHALL BE PROVIDED WIRELESS REMOTE CONTROLLER AND IT SHOULD FACILITATE ON/ OFF FUNCTION, CHANGE OF TEMPERATURE SETTINGS, FAN SPEED SETTING, OPERATION MODE SETTING. 2.6TR HI-WALL IDU
OD204253/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF THE MODULAR VRV EQUIPMENT, BASED ON INVERTER TECHNOLOGY AND COMPRISING MULTIPLE MODULES, SHOULD FEATURE A 100% INVERTER-TYPE HERMETICALLY SEALED INVERTER SCROLL COMPRESSOR WITH A 6-POLE MOTOR . THE OUTDOOR UNIT MUST BE FACTORY-ASSEMBLED, HOUSED IN A DURABLE, WEATHERPROOF CASING MADE FROM RUST-PROOFED MILD STEEL PANELS WITH A BAKED ENAMEL FINISH. THE VRV/VRF SYSTEM SHOULD INCLUDE AUTOMATIC REFRIGERANT CHARGING AND PERIODIC LEAKAGE DETECTION, ENSURING EFFICIENT OPERATION. IT MUST HAVE AN OUTDOOR FAN CAPABLE OF MAINTAINING AN EXTERNAL STATIC PRESSURE OF AT LEAST 75 PA. THE ELECTRICAL CONTROL BOX, RATED IP-55, SHOULD HOUSE A PCB, WHILE THE OUTDOOR FAN MOTOR SHOULD HAVE AN IP-44 RATING FOR ENHANCED PROTECTION AGAINST FOREIGN PARTICLES AND ENVIRONMENTAL CONDITIONS. THE UNIT SHOULD BE DESIGNED TO ADJUST THE EVAPORATIVE TEMPERATURE WITHIN THE RANGE OF 3°C TO 11°C, TAILORED TO INDIVIDUAL BUILDING AND CLIMATE REQUIREMENTS FOR ENHANCED COMFORT AND ENERGY EFFICIENCY, UTILIZING FREE-PHASE TECHNOLOGY. THE VRV SYSTEM SHOULD INCORPORATE INTELLIGENT TECHNOLOGY TO DYNAMICALLY ADJUST THE SPEED OF THE INDOOR FAN, COMPRESSOR, AND OUTDOOR FAN BASED ON OPERATING LOAD AND EXTERNAL TEMPERATURE, OPTIMIZING EFFICIENCY. TO ENSURE SEAMLESS OPERATION AND EASE OF MAINTENANCE, THE COMPRESSOR AND VRV OUTDOOR UNIT SHOULD BE OF THE SAME MAKE. THE SYSTEM SHOULD ALSO SUPPORT MULTI-SITE CONTROL VIA A SINGLE MONITORING DEVICE FROM THE SAME OEM BRAND AND ALLOW INTEGRATION WITH OTHER BUILDING EQUIPMENT FOR CENTRALIZED MONITORING AND MANAGEMENT. ISEER VALUE NOT TO BE LESS THAN 8.6 FOR THE MODULAR SYSTEM 16 HP TOP DISCHARGE
OD204260/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF THE MODULAR VRV EQUIPMENT, BASED ON INVERTER TECHNOLOGY AND COMPRISING MULTIPLE MODULES, SHOULD FEATURE A 100% INVERTER-TYPE HERMETICALLY SEALED INVERTER SCROLL COMPRESSOR WITH A 6-POLE MOTOR . THE OUTDOOR UNIT MUST BE FACTORY-ASSEMBLED, HOUSED IN A DURABLE, WEATHERPROOF CASING MADE FROM RUST-PROOFED MILD STEEL PANELS WITH A BAKED ENAMEL FINISH. THE VRV/VRF SYSTEM SHOULD INCLUDE AUTOMATIC REFRIGERANT CHARGING AND PERIODIC LEAKAGE DETECTION, ENSURING EFFICIENT OPERATION. IT MUST HAVE AN OUTDOOR FAN CAPABLE OF MAINTAINING AN EXTERNAL STATIC PRESSURE OF AT LEAST 75 PA. THE ELECTRICAL CONTROL BOX, RATED IP-55, SHOULD HOUSE A PCB, WHILE THE OUTDOOR FAN MOTOR SHOULD HAVE AN IP-44 RATING FOR ENHANCED PROTECTION AGAINST FOREIGN PARTICLES AND ENVIRONMENTAL CONDITIONS. THE UNIT SHOULD BE DESIGNED TO ADJUST THE EVAPORATIVE TEMPERATURE WITHIN THE RANGE OF 3°C TO 11°C, TAILORED TO INDIVIDUAL BUILDING AND CLIMATE REQUIREMENTS FOR ENHANCED COMFORT AND ENERGY EFFICIENCY, UTILIZING FREE-PHASE TECHNOLOGY. THE VRV SYSTEM SHOULD INCORPORATE INTELLIGENT TECHNOLOGY TO DYNAMICALLY ADJUST THE SPEED OF THE INDOOR FAN, COMPRESSOR, AND OUTDOOR FAN BASED ON OPERATING LOAD AND EXTERNAL TEMPERATURE, OPTIMIZING EFFICIENCY. TO ENSURE SEAMLESS OPERATION AND EASE OF MAINTENANCE, THE COMPRESSOR AND VRV OUTDOOR UNIT SHOULD BE OF THE SAME MAKE. THE SYSTEM SHOULD ALSO SUPPORT MULTI-SITE CONTROL VIA A SINGLE MONITORING DEVICE FROM THE SAME OEM BRAND AND ALLOW INTEGRATION WITH OTHER BUILDING EQUIPMENT FOR CENTRALIZED MONITORING AND MANAGEMENT. ISEER VALUE NOT TO BE LESS THAN 8.6 FOR THE MODULAR SYSTEM 34 HP TOP DISCHARGE (22HP+12HP)
OD208346/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF THE MODULAR VRV EQUIPMENT, BASED ON INVERTER TECHNOLOGY AND COMPRISING MULTIPLE MODULES, SHOULD FEATURE A 100% INVERTER-TYPE HERMETICALLY SEALED INVERTER SCROLL COMPRESSOR WITH A 6-POLE MOTOR . THE OUTDOOR UNIT MUST BE FACTORY-ASSEMBLED, HOUSED IN A DURABLE, WEATHERPROOF CASING MADE FROM RUST-PROOFED MILD STEEL PANELS WITH A BAKED ENAMEL FINISH. THE VRV/VRF SYSTEM SHOULD INCLUDE AUTOMATIC REFRIGERANT CHARGING AND PERIODIC LEAKAGE DETECTION, ENSURING EFFICIENT OPERATION. IT MUST HAVE AN OUTDOOR FAN CAPABLE OF MAINTAINING AN EXTERNAL STATIC PRESSURE OF AT LEAST 75 PA. THE ELECTRICAL CONTROL BOX, RATED IP-55, SHOULD HOUSE A PCB, WHILE THE OUTDOOR FAN MOTOR SHOULD HAVE AN IP-44 RATING FOR ENHANCED PROTECTION AGAINST FOREIGN PARTICLES AND ENVIRONMENTAL CONDITIONS. THE UNIT SHOULD BE DESIGNED TO ADJUST THE EVAPORATIVE TEMPERATURE WITHIN THE RANGE OF 3°C TO 11°C, TAILORED TO INDIVIDUAL BUILDING AND CLIMATE REQUIREMENTS FOR ENHANCED COMFORT AND ENERGY EFFICIENCY, UTILIZING FREE-PHASE TECHNOLOGY. THE VRV SYSTEM SHOULD INCORPORATE INTELLIGENT TECHNOLOGY TO DYNAMICALLY ADJUST THE SPEED OF THE INDOOR FAN, COMPRESSOR, AND OUTDOOR FAN BASED ON OPERATING LOAD AND EXTERNAL TEMPERATURE, OPTIMIZING EFFICIENCY. TO ENSURE SEAMLESS OPERATION AND EASE OF MAINTENANCE, THE COMPRESSOR AND VRV OUTDOOR UNIT SHOULD BE OF THE SAME MAKE. THE SYSTEM SHOULD ALSO SUPPORT MULTI-SITE CONTROL VIA A SINGLE MONITORING DEVICE FROM THE SAME OEM BRAND AND ALLOW INTEGRATION WITH OTHER BUILDING EQUIPMENT FOR CENTRALIZED MONITORING AND MANAGEMENT. ISEER VALUE NOT TO BE LESS THAN 8.6 FOR THE MODULAR SYSTEM 46HP TOP DISCHARGE( 24HP+22HP)
OD204277/2025-2026:SUPPLY, INSTALLATION,TESTING & COMMISSIONING OF THE MODULAR VRV EQUIPMENT, BASED ON INVERTER TECHNOLOGY AND COMPRISING MULTIPLE MODULES, SHOULD FEATURE A 100% INVERTER-TYPE HERMETICALLY SEALED INVERTER SCROLL COMPRESSOR WITH A 6-POLE MOTOR . THE OUTDOOR UNIT MUST BE FACTORY-ASSEMBLED, HOUSED IN A DURABLE, WEATHERPROOF CASING MADE FROM RUST-PROOFED MILD STEEL PANELS WITH A BAKED ENAMEL FINISH. THE VRV/VRF SYSTEM SHOULD INCLUDE AUTOMATIC REFRIGERANT CHARGING AND PERIODIC LEAKAGE DETECTION, ENSURING EFFICIENT OPERATION. IT MUST HAVE AN OUTDOOR FAN CAPABLE OF MAINTAINING AN EXTERNAL STATIC PRESSURE OF AT LEAST 75 PA. THE ELECTRICAL CONTROL BOX, RATED IP-55, SHOULD HOUSE A PCB, WHILE THE OUTDOOR FAN MOTOR SHOULD HAVE AN IP-44 RATING FOR ENHANCED PROTECTION AGAINST FOREIGN PARTICLES AND ENVIRONMENTAL CONDITIONS. THE UNIT SHOULD BE DESIGNED TO ADJUST THE EVAPORATIVE TEMPERATURE WITHIN THE RANGE OF 3°C TO 11°C, TAILORED TO INDIVIDUAL BUILDING AND CLIMATE REQUIREMENTS FOR ENHANCED COMFORT AND ENERGY EFFICIENCY, UTILIZING FREE-PHASE TECHNOLOGY. THE VRV SYSTEM SHOULD INCORPORATE INTELLIGENT TECHNOLOGY TO DYNAMICALLY ADJUST THE SPEED OF THE INDOOR FAN, COMPRESSOR, AND OUTDOOR FAN BASED ON OPERATING LOAD AND EXTERNAL TEMPERATURE, OPTIMIZING EFFICIENCY. TO ENSURE SEAMLESS OPERATION AND EASE OF MAINTENANCE, THE COMPRESSOR AND VRV OUTDOOR UNIT SHOULD BE OF THE SAME MAKE. THE SYSTEM SHOULD ALSO SUPPORT MULTI-SITE CONTROL VIA A SINGLE MONITORING DEVICE FROM THE SAME OEM BRAND AND ALLOW INTEGRATION WITH OTHER BUILDING EQUIPMENT FOR CENTRALIZED MONITORING AND MANAGEMENT. ISEER VALUE NOT TO BE LESS THAN 8.6 FOR THE MODULAR SYSTEM 32 HP TOP DISCHARGE (16HP+16HP)
OD204290/2025-2026:Supply , installation , testing and commissioning of 'y 'joints indoor
OD204362/2025-2026:Supply,installation,testing and commissioning of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 22.2 mm dia
OD204363/2025-2026:Supply of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 28.6 mm dia
OD204364/2025-2026:Supply of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 34.92 mm dia
OD204727/2025-2026:Supply,installation,testing and commissioning of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 41.3mm dia
OD202209/2025-2026:Supply,installation,testing and commissioning of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 9.5 mm dia
OD202210/2025-2026:Supply,installation,testing and commissioning of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 12.7mm dia
OD202211/2025-2026:Supply,installation,testing and commissioning of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 19.1 mm dia
OD202227/2025-2026:Supply,installation,testing and commissioning of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 6.35 mm dia
OD208399/2025-2026: Supply,installation,testing and commissioning of cu refrigerant piping with 18g Hard drawn copper pipes, insulated with 19 mm thick nitrile rubber tubing finished with glass cloth poly shield coating of approved make inclusive of proper supports 15.9 mm dia
OD205018/2025-2026:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC shielded communication cabling between VRV/VRF indoor and outdoor units 650/1100 V grade copper conductor flexible cables in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 2 core 1 sq mm
OD222084/2023-2024:SUPPLY & INSTALLATION OF HEPA FILTERS WITH MINIMUM PARTICLE EFFICIENCY OF 99.97 % DOWN TO 0.3 MICRONS OF FOLLOWING CAPACITY.4000 CFM
OD205236/2025-2026:SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF LAMINAR FLOW PANEL MADE OF AL SHEET OF REQUIRED THICKNESS WITH CHANNELS FOR MOUNTING HEPA FILTER AND ALL OTHER STANDARD ACCESSORIES.
OD205237/2025-2026:SUPPLY, INSTALLATION TESTING AND COMMISSIONING OF EXHAUST FANS OF INLINE DUCT TYPE WITH SPEED REGULATOR FOR OT'S- 500 CFM,10MM ESP WG
OD205587/2025-2026:SUPPLY ,INSTALLATION, TESTING & COMMISSIONING OF 9KW ELECTRIC STRIP HEATERS FOR CONTROLLING HUMIDITY COMPLETE WITH FIXING ARRANGEMENTS, THERMOSTATS AND SAFETY THERMOSTAT INCLUDING ALL POWER AND CONTROL WIRING.
OD205632/2025-2026:SUPPLY ,INSTALLATION, TESTING & COMMISSIONING OF THERMAL INSULATION USING 13MM CLOSED CELL ANTIMICROBIAL NITRILE RUBBER
OD210107/2025-2026:SUPPLY ,INSTALLATION, TESTING & COMMISSIONING OF ACOUSTIC INSULATION USING OPEN CELL NEITRILE RUBBER WITH 10MM THICKNESS
OD205633/2025-2026:SITC OF AL PERFORATED GRILL FOR LAMINAR FLOW PANEL
OD205634/2025-2026:SITC OF FRESH AIR ARRANGEMENTS WITH BIRD SCREEN, AND VCD
OD205635/2025-2026:SITC OF EXTRACT AIR ARRANGEMENTS WITH LOUVERS, BACK DRAFT DAMPERS AND VCD'S
OD65812/2024-2025:SITC OF CANVAS CONNECTION FOR CONNECTING AHU/FCU TO DUCT
OD65816/2024-2025:Supply,installation,testing and commissioning of insulated condensate drain piping out of PVC-6kg/cm2 pipes complete with hangers/ supports/ clamps/clips and all fittings etc and insulated with 13 mm thoick nitrile rubber sleeves and joints sealed with 50 mm black PVC tapes-32 mm dia
OD65817/2024-2025:Charges for suppling and filling the R410A refregerent gas in the air conditioning system
16.12.1.1:Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 Thickness 0.63 mm sheet
16.12.1.2:Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated GSS sheet metal rectangular ducting as per IS 655-2006 Thickness 0.80 mm sheet
OD205219/2025-2026: Supply, installation, balancing and commissioning of factory fabricated AL SHEET METAL DUCTING WORK rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated AL SHEET METAL DUCTING WORK rectangular ducting ALUMINIUM 20 G
OD205223/2025-2026: Supply, installation, balancing and commissioning of factory fabricated AL SHEET METAL DUCTING WORK rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Factory fabricated AL SHEET METAL DUCTING WORK rectangular ducting ALUMINIUM 22 G
OD209088/2025-2026:SITC OF EXTRUDED ALUMINIUM VOLUME CONTROL DAMPERS COMPLETE WITH FLANGES, CHANNELS AND CONTROL LEVERS SUITABLE FOR DUCT MOUNTING
OD209940/2025-2026:SITC OF POWDER COATED EXTRUDED ALUMINUM SUPPLY/RETURN AIR GRILL WITH HORIZONTAL FIXED BARS AND END FLANGES
OD209942/2025-2026:SITC OF AL SUPPLY /RETURN AIR DIFFUSERS WITH DAMPER
14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels
14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.
OD208962/2025-2026: Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)
OD209249/2025-2026: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1394051.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
SBD.pdf
Tender Documents • 6.84 MB
MOM.pdf
Tender Documents • 0.07 MB
BOQ_1394051.xls
BOQ • 0.34 MB
NIT.pdf
Tender Documents • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .