PROVN AND INSTALLATION OF GEYSER, PROVN OF AC POINTS AND SPECIAL REPAIR IN CONVERSION OF CONVENTIONAL LIGHTS TO LED LIGHTS AT AF STN WADSAR

Amount

Supply and fix Water heater storage type ABS body electric, capacity 25 litres BEE 5 star rated including suitable size and length of PVC connection for hot & cold water and fixing arrangement complete with necessary fastner and nut bolts washer etc complete all as specified and directed.

S&F CPVC 15mm bore pipe Sch-40 with complete fittings and fixed complete to walls and ceilings or laid on floors complete all as specified and directed.

S & F stop valve, cast copper alloy of 15 mm bore dia with crutch, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing 15mm bib tap long nose with flange cast copper alloy CP fancy type, screwed down screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for concealed sub main wiring of two run with 4.0 Sqmm single core PVC insulated, FRLSH flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases where required including one run of 4.0Sqmm single core PVC insulated, FRLSH, flexible copper cable as earth continuity conductor in green color complete all as specified and directed.

S& F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fixing SPN 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 aprt I and II including accessories like HDPE snap fit coupler with neoprene 'O' ring of following size :- 75 mm inner dia (for protection of 185 sqmm UG cable)

All as per item No 11 here in before but 63 mm inner dia (for protection of 150/120 sqmm UG cable)

All as per item No 11 here in before but 50 mm inner dia (for protection of 95/70/50 sqmm UG cable)

All as per item No 11 here in before but 38 mm inner dia (for protection of 25/16 sqmm UG cable)

M & L for boring of holes up to 80 mm dia under road pavement, hard standing, etc by trench- less technology using ultra sound technique complete all as directed by Engineer-in- charge. Note:- Pipe for protection of cable shall be measured and paid separately.

S&F in repair light grade GI tubing of 50 mm bore for cable protection in wall/trench complete all as directed by Engineer-in- charge.

S&F in repair light grade GI tubing of 80 mm bore for cable protection in wall/trench complete all as directed by Engineer-in- charge.

Supplying and laying XLPE insulated, PVC sheathed, armoured, heavy duty, aluminium conductor LT, 1100 Volts grade UG cable fixed on walls/laying in trenches/or passing through road/floor complete testing and connection using switable size of copper lugs end to end at site complete all as specified and directed by Engr In Charge for the following sizes: - (a) 16 Sqmm 4 core

(b) 25 Sqmm 3.5 core

(c) 50 Sqmm 3.5 core

(d) 70 Sqmm 3.5 core

(e) 95 Sqmm 3.5 core

(f) 120 Sqmm 3.5 core

(g) 185 Sqmm 3.5 core

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6.3 mm burried directly in ground level with teop edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanised iron strip 25 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No.3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforce with welded steel wire babric (APM) weight not less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified & directed.

Supply, install, testing and commissioning weather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type canopy top factory lock front and back opening totally enclosed made out of 3.15mm thick sheetmetal enclosure of suitable size with angle iron frame of MS angle 50 X 50 X 6mm upto 1.5 mtrs length from ground level duly powder coated of size 800 (w) x 1000 (H) x 400 (D) mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and side locking arrangement consisting of sufficient Nos of circular cables entrly holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc. inside the enclosure, the required Nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15micron) grey hammer tone with one coat of including connecting with L.T armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium and LT panel should be CPRI approved and factory fabricated complete all as specified and directed and consisting of the following:- (i) MCCB 160 Amp, 4 Pole(AC 415 Volt), 16 KA - 01 No (ii) 100 Amp MCCB, 4 Pole, 415V, 16 KA - 04 Nos, (Out going) (iii) AL bus bar min 300 Amp - 01 set (iv) LED lamp RYB - 01 Set (v) Internal wiring with copper conductor incl necessary lugs and thimbles - 01 Job (vi) Digital voltmeter 0-500V (vii) Digital ampere meter 0-200 Amp (viii) Space for 02 Nos of spare MCCB

All as per Item No 20.00 here in before but size 600 (w) x 900 (H) x 400 (D) mm and consisting of the following:- (i) MCCB 125 Amp 4 Pole (AC 415 Volt), 16 KA - 01 No (ii) 63 Amp MCB isolator FP, 415V, 16 KA- 04 Nos, (Out going) (iii) AL bus bar 200 Amp - 01 set (iv) Indicator LED lamp RYB - 01 Set (v) Internal wiring with copper conductor incl necessary lugs and thimbles - 01 Job (vi) Digital voltmeter 0-500V (vii) Digital ampere meter 0-200 Amp (viii) Space for 02 Nos of spare MCCB Isolator

Supply and fixing MCB isolator FP 63 AMP rating 415 V, 50Hz suitable for fixing in DB/panel board complete with connection testing and commissioning complete all as specified & directed.

Supply and fixing MCB isolator FP 100 AMP rating 415 V, 50Hz suitable for fixing in DB/panel board complete with connection testing and commissioning complete all as specified & directed.

S&F tube light fitting 20 W Basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver complete all as specified & directed.

S&F tube light fitting 10 W Basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver complete all as specified & directed.

S&F 2x2 36W Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling, complete all as specified & directed.

S&F 12W, high efficient recess mounted LED round downlighter with white powder coated, pressure die cast PVC housing complete all as specified & directed.

S&F Post Top 20W, High efficient LED with aluminium housing in Pure Polyster UV resistant powder coated black finish and Top maintainable product with top opening die cast cover with acrylic clear glass reflector IP 65 complete all as specified & directed.

Supply and fixing PVC holder with lamp LED 07 watt Incl taking down old u/s one complete all as specified & directed.

Supply and fixing LED flood light 70 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp Incl taking down old u/s one complete all as specified & directed.

Supply and fixing LED flood light 100 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp Incl taking down old u/s one complete all as specified & directed.

Supply and fixing LED street light fitting 35 Watt 230 VAC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed.

M & L for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 2.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly, drawn through in conduit pipe fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete all as specified & directed.

M & L for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly, drawn through in conduit pipe fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete suitable for One light/fan point controlled by one, one way switch.

S&F Switch piano, single pole one way 15 Amps 240 volt capacity flush type complete all as specified & directed.

S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified & directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type complete all as specified and directed.

M & L for cable with Copper Conductor PVC round sheather (Flexible) Industrial of size 2.5 Sqmm complete all as specified & directed.

S& F Weather proof flat twin core auminium cable 1.5 sqmm complete all as specified & directed.

S& F Weather proof flat twin core auminium cable 2.5 sqmm complete all as specified & directed.

TECH SERVE SOLUTIONS

UMIYA BUILDCON

ALPINE CONSTRUCTIONS

TRIMURTHI ENTERPRISES

ARTI CONSTRUCTION

Abhishek Enterprises