SITC of sump pump and other misc. works

Amount

Supplying & fixing 50mm dia (medium class) MS pipe for supporting arrangement of shed for condenser units including cutting, welding, painting, grouting with cement concrete complete as required.

Providing M S structure fabricated out of MS plates i/c cutting, welding, drilling holes, fixing on wall/ floor, painting etc. for supporting arrangement of shed for condenser units as reqd.

Supplying & Instatallation of 3HP (2.2KW) Dewatering Monobloc Pump for lefting the AC Drain water from basement sump i/c testing and comissioning etc. complete as reqd. (M/s Kirloskar KDS-335 or similar approved make)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.