Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | Manoj K S L2 | BIJUKUMAR L1 |
|---|---|---|---|---|---|
| 1.00mini MCF | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.54 | cum | 360 ₹194.4 | 359.72 ₹194.25 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.54 | cum | 9,235.97 ₹4,987.42 Lowest | 9,235.97 ₹4,987.42 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 183.12 | kg | 200 ₹36,625 | 194.27 ₹35,575.69 Lowest |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 1,232.41 | kg | 200 ₹2,46,481.8 | 178.42 ₹2,19,886.41 Lowest |
| 1.00 | OD435295/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required. | 36.45 | sqm | 700 ₹25,515 | 621.1 ₹22,639.1 Lowest |
| 1.01 | OD457000/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.40 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm | 15 | metre | 378.99 ₹5,684.85 Lowest | 378.99 ₹5,684.85 Lowest |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 800 | per Letter per cm height | 6.34 ₹5,072 Lowest | 6.34 ₹5,072 Lowest |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 62.36 | sqm | 164.86 ₹10,280.34 Lowest | 164.86 ₹10,280.34 Lowest |
Tender Value
₹3.0 L
EMD Value
₹7,608
Closing Date
18 Feb 2026, 4:00 pmClosed
ASSISTANT ENGINEER LIS AND EW AMBALLOOR
ASSISTANT ENGINEER LIS AND EW AMBALLOOR
Construction of MINI MCF-General Civil Work
2026_LSGD_835503_1
E47/AMBR/25-26
Open Tender
Civil Works - Others
Item Rate
180 days
AMBALLOOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹675
Yes
₹7,608
28 Jul 2026
11 Feb 2026
20 Feb 2026
11 Feb 2026
18 Feb 2026
11 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1mini MCF | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - |
| 1.004 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 0.6 | kg | - | - |
| 1.005 | OD435295/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch
ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel
grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-
18 microns.Sheet should have protective guard film of 25 microns minimum to avoid
scratchesduring transportation and should be supplied in single length upto 12 metre or
as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting tosize and shape wherever required. | - | sqm | - | - |
| 1.006 | OD457000/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.40 mm (+
0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600
mm | - | metre | - | - |
| 1.007 | 13.71:Lettering with black Japan pint of approved brand and manufacture | - | per Letter per cm height | - | - |
| 1.008 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 0.2 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1405799.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.08 MB
SBDMCF.pdf
Tender Documents • 0.95 MB
BOQ_1405799.xls
BOQ • 0.30 MB
PRELIMINARYMCF.pdf
Tender Documents • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .