NIT No. 2 item No. 1 (24-25) EE (T)/SE (M)-4

Dismantling of the 132 KW motor from the foundation after removing of all the connection of LRS, ACB, motor and lifting the motor from the foundation to working platform of set No. 06 and dismantling of pump from the foundation after closing of the inlet/ delivery valve including dismantling of' existing damaged M.S. base frame and after cutting of foundation bolts and RCC foundation with the help of welding set, men machine & gas cutter set.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm nominal size). DJB SOR Item Code: 46.1.5

Fabrication of M.S. Base frame of size 1.82 mtrs. X 1.06 mtrs. by MS C-Channel and MS Flat Bar. Structural steel work riveted, bolted, or welded in built up sections, trusses, and framed work, including cutting, hoisting, fixing in position, and applying a priming coat of approved steel primer all complete. Weight – 148 kg. approx. DSR Civil 2022 (Item No. 10.2)

Supply of Neoprene rubber sheet 50% Neoprene. Make: - Jyoti/ Any DJB Approved make. DJB SOR Item Code: 22.6.1

Supply of double flanged MS pipe 500x300 mm dia. for jointing valve delivery to other side of pump suction. The thickness of pipe will be 8 mm and flange thickness minimum 30mm.

Supply of double flanged MS Taper of 450x250 mm dia. and other side of pump delivery size the thickness of pipe will be 8 mm and flange thickness minimum 20mm.

Supply of foundation bolts (eye bolt) of good quality as per site requirement.

Supply of Nut, Bolt and Washer of good quality as per site requirements.

Supply& fixing of anti-vibration mounting pads as required.

Supply of tyre type automatic flexible cushion coupling TC/J/20. Make: -Unique/ Fenner/ Any DJB approved make. DJB SOR Item Code: 21.8.23

Supply of tyre TC/J/20. Make: -Unique/ Fenner/ Any DJB approved make. DJB SOR Item Code: 21.8.23

Fixing of CI tyre type automatic flexible cushion coupling TC/J/20 by making bore on both side of coupling i.e., on motor and pump side with help of drilling and boring machine, tools, tackles, and manual labour etc.

Providing/ Fixing of coupling guard suitable for 4 MGD pump set as per requirement.

Installation of new pump and motor on new foundation with suction and delivery side fittings, alignment of pump and motor for vibration free operation. Making electric connection of motor making connection with pump charging system. The job includes nut bolt rubber insertion sheet etc. as required to complete the job. The job includes heavy duty foundation bolts and their proper grouting. The painting of MS fittings. Note: -The pump set shall be provided by the department.

Providing/Fixing of pressure gauge of 150 mm dia. having required range with accessories such as GI fittings, Bib cock etc. required complete the work in all respect at pump sets delivery. Make: - Hguru/Fibeg/Any DJB Approved make

P/F of dead flange of 450mm & 500mm, thickness 8mm for stop the leakage water

Testing and Commissioning of pump on full load as per direction of engineer – in – charge.

Raj Engineering Co.

PARTH SHARMA

Devraj Enterprises

Super System Engineers