Annual maintenance of TTD Kalyanamandapam, offices in 1st and 2nd floor and Guest House at Tirunilayam, Hyderabad for the year 2026-27.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Construction of Brick Masonry in CM(1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar (1:5) 12mm thick using best river sand from approved source including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Plastering in Cement mortar (1:5) 20mm thick using best river sand from approved source including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

Painting single coat for old work with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting single coat for old work with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Polishing the old wood work with best French Sprit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete.

Painting single coat for old Plastered surface with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 30 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Supply of the following labour to attend the work as and when needed

Mason/ Carpenter/ Painter - II class

Man/ woman Mazdoor

Writing the sign boards, Direction boards and painting Rangolies over M.S sheet with two coats of back ground one coat primary & one coat synthetic enamel paint over the sign boards with printing two coats with synthetic enamel paint over the back ground. The rate includes cost of paint, labour charges, scaffolding etc., required for the work. The paint should be done with first quality synthetic enamel paint of approved colour and make as directed during execution.

Supply of good quality potable drinking water through mobile tankers of 5000 liters capacity to SV Temple, Himayathnagar, Hyderabad including cost of water and conveyance, incidental charges etc., complete as directed during execution.

Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mm x 25mm MS square pipe (light weight)with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials, labour for printing, erection and removal square pipe (light weight) after completion of the function.

Supply & Fixing of 4 mm thick pin-headed glass including cost & conveyance, fixing glass panes of any thickness to the existing door / window panes including fixing the beading excluding cost of beading incidental charges, etc. complete.

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Rewinding of Burnt 3 H.P Submermissible motor of Given make and other minor HP Motor with suitable guage insulated PVC copper wire varnishing, tapping, fitting etc.,complete with over hauling and replacement of terminal plate/minor hare ware items viz, soldering, testing of out going wires, bolts and nuts, painting with approved colour etc., and keep the motors in good condition. (Excluding GST)

Installation, testing and Commissioning of the submersible pump set with all accessories as per the standard specifications for above 60mts and up to 120 mts including laying of G.I. Pipe duly providing the G.I. Pipe of not more than 3 meters length in the Bore well including all incidental charges etc., complete as directed during execution.

Providing and fixing Cast Iron Body Bottle Type Hydraulic Door Closer (IS: 3564) with double speed adjustment, with necessary accessories and screws etc. complete.

Conveyance of debris and waste material in the premises of S.V. Temple and Kalyanamandapam (Tirunilayam) at Himayathnagar to a distance of 40 kilo meters including incidental charges, etc., complete.

Supply of PVC/SWR PIPES 6kg/cm2 (Materials shall be procured from the list of approved Brands/Manufacturers/ Suppliers) including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

-do- 110 mm dia 3M double socket PVC / SWR pipe

-do- 75 mm dia 3M double socket PVC / SWR pipe

-do- 160 mm dia 3M double socket PVC / SWR pipe

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice etc., complete.

Supply of PVC/SWR PIPE FITTINGS (Materials shall be procured from the list of approved Brands/Manufacturers/ Suppliers) including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

-do- For 110 mm dia plain bend 45 Degree

-do- For 110 mm dia Door bend 87.5 Degree

-do- For 110 mm dia Single "T"

-do- For 75 mm dia plain bend 45 Degree

-do- For 75 mm dia Door bend 87.5 Degree

-do- For 75 mm dia Single "T"

Supply of the following Alluminium anodised fittings, including cost and conveyance, incidental charges, etc., complete.

150 mm long tower bolts-10 mm Bolt as per ISI 204.

125 mm long Butt hinges as per ISI 205.

150 mm long Butt hinges as per ISI 205.

100 mm long door handles as per IS 208.

150 mm long door handles as per IS 208.

200 mm long aldrops as per IS: 2681

Supplying & fixing approved make Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap ISI Mark: 580 mm x 440 mm including cost and conveyance of all materials, incidental charges etc., complete as directed during execution.

Supply and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance and incidental charges etc., complete.

Supply and fixing approved make wash down European Water Closet of 1st quality Conforming to IS:2556-Part-2-2004 of white glazed with "P" trap.

Supply and fixing of PVC low level cystern with internal components & short bend 8 liters capacity - single flush.

Supply and fixing internal fittings for PVC flush tank including cost and conveyance, incidental charges etc., complete as directed during execution.

Supply and fixing of best Indian make Plastic seat and lid for the European water closets with rubber or plastic buffers as per IS: 2548-1996 including cost and conveyance, incidental charges etc., complete as directed during execution.

Supplying and fixing Indian make Flat back Wash hand basin 1st quality conforming to IS 2556-Part-4:1972 with waste fittings like rubber plug, chain 32mm nominal size CP fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with15mm nominal bore chromium plated pillar Tap of 1st quality Indian make 400gms Seiko/Senior/Nice/ ESSO or equivalent complete with standard CI brackets including wooden block ; 550X400 mm Single CP pillar cock.

Supply and fixing NP coat hook including cost and conveyance of materials etc., complete

S&F premium make CPVC Pipes including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental, labour charges, etc.complete for finished item of work as directed by Engineer-in-charge.

-do- 22.20mm OD pipe- SDR 13.5

-do- 28.60mm OD pipe- SDR 13.5

-do- 34.90mm OD pipe - SDR 13.5

-do- 41.30 mm OD pipe SDR 13.5

-do- 54.00 mm OD pipe SDR 13.5

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs.

Supply and fixing of TV shape mirror with plastic frame size 609.6mm X 457.2mm including cost and conveyance of all materials etc., complete.

Supplying & fixing CP finish steel towel rod of 600 mm long and 20 mm dia with brackets including cost and conveyance of all materials etc., complete.

Supplying & fixing of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty etc., complete as directed during execution.

Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs including cost and conveyance, incidental charges etc., complete as directed during execution.

Hire charges for truck 5.5 cum per 10 Tonnes for material transport of wooden materials, partitions, office furniture etc., including cost of crew, oils, conveyance of machinery to site and all other incidental charges etc., complete as directed during execution.

Flushing of bore well of dia 165/150 mm with power rig at an average pressure of 150 PSI, including crew charges, completely done to the satisfaction of the department including detachable of all accessories and refix all materials as per the original condition including all labour charges, but excluding cost of materials & excluding taxes etc,, complete.

Cement Concrete (1:2.5:5) - Grade M15 using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered uPVC sections with TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60mm x 55 mm x 2.40 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 mm x 60 mm x 2.40 mm with reinforcement of 1.0/1.2 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with soft PVC gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sash shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e., Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges etc for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.